mcAfee Secure Website
exam =5
exam =6

Exam Code: 4A0-D01

Exam Name: Nokia Data Center Fabric Fundamentals

Certification Provider: Nokia

Nokia 4A0-D01 Questions & Answers

Reliable & Actual Study Materials for 4A0-D01 Exam Success

61 Questions & Answers with Testing Engine

"4A0-D01: Nokia Data Center Fabric Fundamentals" Testing Engine covers all the knowledge points of the real Nokia 4A0-D01 exam.

The latest actual 4A0-D01 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at 4A0-D01 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Nokia Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Nokia 4A0-D01 Practice Test 37

Question 360

In the fictional Metro-8 east pod, a multi-tenant fabric undergoing documented validation, the team reports that a short incident window requires evidence of selected packets without broad logging. The planned change is "Use a scoped SR Linux capture filter and inspect the captured traffic." Which post-change observation best validates the intended technical behavior?

  1. Use an unrelated tenant dashboard as proof, without verifying the required capture filters condition.
  2. Check only that the device hostname is listed in the inventory, without examining capture filters behavior.
  3. Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior.
  4. Verify that the capture contains relevant matching frames from the requested interface or path.

Explanation

Correct Answer

D:

Capture filters select packet observations for troubleshooting rather than changing policy by themselves. The option uses “Verify that the capture contains relevant matching frames from the requested interface or path” to address “a short incident window requires evidence of selected packets without broad logging”. The acceptance test is: the capture contains relevant matching frames from the requested interface or path. Observe the relevant forwarding/control-plane behavior under the approved test.

Incorrect Answers

A:

“Use an unrelated tenant dashboard as proof, without verifying the required capture filters condition” targets a different operation from the reported requirement: “a short incident window requires evidence of selected packets without broad logging”. Capture filters select packet observations for troubleshooting rather than changing policy by themselves. The confirming result is: the capture contains relevant matching frames from the requested interface or path. Observe the relevant forwarding/control-plane behavior under the approved test.

B:

“Check only that the device hostname is listed in the inventory, without examining capture filters behavior” targets a different operation from the reported requirement: “a short incident window requires evidence of selected packets without broad logging”. Capture filters select packet observations for troubleshooting rather than changing policy by themselves. The confirming result is: the capture contains relevant matching frames from the requested interface or path. Observe the relevant forwarding/control-plane behavior under the approved test.

C:

“Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior” targets a different operation from the reported requirement: “a short incident window requires evidence of selected packets without broad logging”. Capture filters select packet observations for troubleshooting rather than changing policy by themselves. The confirming result is: the capture contains relevant matching frames from the requested interface or path. Observe the relevant forwarding/control-plane behavior under the approved test.

Question 361

In the fictional Summit-4 east pod, a change-freeze exception for a narrow operational fault, the team reports that a policy must restrict selected transit traffic entering one tenant-facing interface. A peer suggested: "Change a BGP route distinguisher as the packet filter" That did not solve the constraint. What should be chosen instead?

  1. Apply an appropriate ingress interface ACL to that attachment.
  2. Alter CLI aliases to block tenant traffic.
  3. Apply only a management-plane system ACL to filter all transit packets.
  4. Change a BGP route distinguisher as the packet filter.

Explanation

Correct Answer

A:

An interface ACL applies packet filtering to traffic on the scoped interface path. For Summit-4, confirm the actual outcome: matching transit flows are filtered while permitted flows continue.

Incorrect Answers

B:

“Alter CLI aliases to block tenant traffic” targets a different operation from the reported requirement: “a policy must restrict selected transit traffic entering one tenant-facing interface”. An interface ACL applies packet filtering to traffic on the scoped interface path. Use the appropriate method: Apply an appropriate ingress interface ACL to that attachment.

C:

“Apply only a management-plane system ACL to filter all transit packets” targets a different operation from the reported requirement: “a policy must restrict selected transit traffic entering one tenant-facing interface”. An interface ACL applies packet filtering to traffic on the scoped interface path. Use the appropriate method: Apply an appropriate ingress interface ACL to that attachment.

D:

“Change a BGP route distinguisher as the packet filter” targets a different operation from the reported requirement: “a policy must restrict selected transit traffic entering one tenant-facing interface”. An interface ACL applies packet filtering to traffic on the scoped interface path. Use the appropriate method: Apply an appropriate ingress interface ACL to that attachment.

Question 362

In the fictional Delta-6 east pod, a controller-managed extension requiring reproducible evidence, the team reports that a large route display contains noise and a specific match must be isolated. A peer suggested: "Block the route through an ACL to make it disappear" That did not solve the constraint. What should be chosen instead?

  1. Remove the routing protocol configuration to reduce output.
  2. Apply supported CLI filtering to narrow the displayed results.
  3. Block the route through an ACL to make it disappear.
  4. Edit a syslog file and assume the route table is filtered.

Explanation

Correct Answer

B:

Output filtering changes the view without changing routing behavior. For Delta-6, confirm the actual outcome: the filtered display includes the target entries while forwarding stays unchanged.

Incorrect Answers

A:

“Remove the routing protocol configuration to reduce output” targets a different operation from the reported requirement: “a large route display contains noise and a specific match must be isolated”. Output filtering changes the view without changing routing behavior. Use the appropriate method: Apply supported CLI filtering to narrow the displayed results.

C:

“Block the route through an ACL to make it disappear” targets a different operation from the reported requirement: “a large route display contains noise and a specific match must be isolated”. Output filtering changes the view without changing routing behavior. Use the appropriate method: Apply supported CLI filtering to narrow the displayed results.

D:

“Edit a syslog file and assume the route table is filtered” targets a different operation from the reported requirement: “a large route display contains noise and a specific match must be isolated”. Output filtering changes the view without changing routing behavior. Use the appropriate method: Apply supported CLI filtering to narrow the displayed results.

Question 363

In the fictional Canyon-5 west pod, a fabric operations audit prior to tenant onboarding, the team reports that a manually configured destination prefix has no usable forwarding adjacency. The planned change is "Reference an appropriate reachable next-hop group for the static route." Which post-change observation best validates the intended technical behavior?

  1. Use an unrelated tenant dashboard as proof, without verifying the required static route next-hop condition.
  2. Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior.
  3. Verify that the static prefix is installed with a valid resolved forwarding next hop.
  4. Check only that the device hostname is listed in the inventory, without examining static route next-hop behavior.

Explanation

Correct Answer

C:

A static route needs a viable forwarding disposition or next-hop resolution. The option uses “Verify that the static prefix is installed with a valid resolved forwarding next hop” to address “a manually configured destination prefix has no usable forwarding adjacency”. The acceptance test is: the static prefix is installed with a valid resolved forwarding next hop. Before onboarding, test that the intended fabric state exists.

Incorrect Answers

A:

“Use an unrelated tenant dashboard as proof, without verifying the required static route next-hop condition” targets a different operation from the reported requirement: “a manually configured destination prefix has no usable forwarding adjacency”. A static route needs a viable forwarding disposition or next-hop resolution. The confirming result is: the static prefix is installed with a valid resolved forwarding next hop. Before onboarding, test that the intended fabric state exists.

B:

“Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior” targets a different operation from the reported requirement: “a manually configured destination prefix has no usable forwarding adjacency”. A static route needs a viable forwarding disposition or next-hop resolution. The confirming result is: the static prefix is installed with a valid resolved forwarding next hop. Before onboarding, test that the intended fabric state exists.

D:

“Check only that the device hostname is listed in the inventory, without examining static route next-hop behavior” targets a different operation from the reported requirement: “a manually configured destination prefix has no usable forwarding adjacency”. A static route needs a viable forwarding disposition or next-hop resolution. The confirming result is: the static prefix is installed with a valid resolved forwarding next hop. Before onboarding, test that the intended fabric state exists.

Question 364

In the fictional Canyon-5 west pod, a fabric operations audit prior to tenant onboarding, the team reports that a support team wants reusable context values across diagnostic commands. The shift handoff must specify a defensible solution and the observable service outcome. Which recommendation is technically justified?

  1. Advertise CLI strings as EVPN prefixes.
  2. Write a static route for every terminal shortcut.
  3. Edit an ACL policer as a substitute for CLI variables.
  4. Use supported CLI environment variables for repeatable command contexts.

Explanation

Correct Answer

D:

Environment variables organize command-line context rather than protocol forwarding. For Canyon-5, confirm the actual outcome: the intended CLI context resolves consistently during diagnostics.

Incorrect Answers

A:

“Advertise CLI strings as EVPN prefixes” targets a different operation from the reported requirement: “a support team wants reusable context values across diagnostic commands”. Environment variables organize command-line context rather than protocol forwarding. Use the appropriate method: Use supported CLI environment variables for repeatable command contexts. Before onboarding, test that the intended fabric state exists.

B:

“Write a static route for every terminal shortcut” targets a different operation from the reported requirement: “a support team wants reusable context values across diagnostic commands”. Environment variables organize command-line context rather than protocol forwarding. Use the appropriate method: Use supported CLI environment variables for repeatable command contexts. Before onboarding, test that the intended fabric state exists.

C:

“Edit an ACL policer as a substitute for CLI variables” targets a different operation from the reported requirement: “a support team wants reusable context values across diagnostic commands”. Environment variables organize command-line context rather than protocol forwarding. Use the appropriate method: Use supported CLI environment variables for repeatable command contexts. Before onboarding, test that the intended fabric state exists.

Question 365

In the fictional North-10 east pod, a commissioning exercise under the on-call team, the team reports that a route appears in logs but cannot be found in the active forwarding table. An unrelated configuration change is being considered. Which focused remediation best addresses the described problem first?

  1. Compare logs with current protocol and forwarding state.
  2. Disable interface statistics to reconcile the mismatch.
  3. Assume all historically advertised routes remain installed forever.
  4. Treat old syslog lines as the live FIB.

Explanation

Correct Answer

A:

Historical events alone do not establish currently installed forwarding state. The option uses “Compare logs with current protocol and forwarding state” to address “a route appears in logs but cannot be found in the active forwarding table”. The result must be observed on the affected component. Before onboarding, test that the intended fabric state exists.

Incorrect Answers

B:

“Disable interface statistics to reconcile the mismatch” targets a different operation from the reported requirement: “a route appears in logs but cannot be found in the active forwarding table”. Historical events alone do not establish currently installed forwarding state. Use the appropriate method: Compare logs with current protocol and forwarding state. Before onboarding, test that the intended fabric state exists.

C:

“Assume all historically advertised routes remain installed forever” targets a different operation from the reported requirement: “a route appears in logs but cannot be found in the active forwarding table”. Historical events alone do not establish currently installed forwarding state. Use the appropriate method: Compare logs with current protocol and forwarding state. Before onboarding, test that the intended fabric state exists.

D:

“Treat old syslog lines as the live FIB” targets a different operation from the reported requirement: “a route appears in logs but cannot be found in the active forwarding table”. Historical events alone do not establish currently installed forwarding state. Use the appropriate method: Compare logs with current protocol and forwarding state. Before onboarding, test that the intended fabric state exists.

Question 366

In the fictional Ridge-2 east pod, a secondary data hall with tenant isolation requirements, the team reports that a leaf's routed BGP peering fails after peer-AS data was changed. The shift handoff must specify a defensible solution and the observable service outcome. Which recommendation is technically justified?

  1. Create a MAC-VRF rather than verifying the neighbor.
  2. Correct the neighbor addressing and peer autonomous system configuration.
  3. Change the syslog severity to fix the session.
  4. Add a VXLAN VNI to establish the underlay BGP session.

Explanation

Correct Answer

B:

BGP session establishment requires consistent neighbor transport and AS expectations. The option uses “Correct the neighbor addressing and peer autonomous system configuration” to address “a leaf's routed BGP peering fails after peer-AS data was changed”. The result must be observed on the affected component.

Incorrect Answers

A:

“Create a MAC-VRF rather than verifying the neighbor” targets a different operation from the reported requirement: “a leaf's routed BGP peering fails after peer-AS data was changed”. BGP session establishment requires consistent neighbor transport and AS expectations. Use the appropriate method: Correct the neighbor addressing and peer autonomous system configuration.

C:

“Change the syslog severity to fix the session” targets a different operation from the reported requirement: “a leaf's routed BGP peering fails after peer-AS data was changed”. BGP session establishment requires consistent neighbor transport and AS expectations. Use the appropriate method: Correct the neighbor addressing and peer autonomous system configuration.

D:

“Add a VXLAN VNI to establish the underlay BGP session” targets a different operation from the reported requirement: “a leaf's routed BGP peering fails after peer-AS data was changed”. BGP session establishment requires consistent neighbor transport and AS expectations. Use the appropriate method: Correct the neighbor addressing and peer autonomous system configuration.

Question 367

In the fictional Metro-8 west pod, a multi-tenant fabric undergoing documented validation, the team reports that an operator needs live interface operational data rather than only intended settings. The shift handoff must specify a defensible solution and the observable service outcome. Which recommendation is technically justified?

  1. Read only the saved configuration and assume it proves link status.
  2. Replace the interface with a loopback to create an up indicator.
  3. Inspect the operational state datastore or state-oriented CLI view.
  4. Check only user role names to determine physical link health.

Explanation

Correct Answer

C:

Operational state exposes what the system reports now rather than merely requested configuration. For Metro-8, confirm the actual outcome: the relevant state paths show current link and counter values.

Incorrect Answers

A:

“Read only the saved configuration and assume it proves link status” targets a different operation from the reported requirement: “an operator needs live interface operational data rather than only intended settings”. Operational state exposes what the system reports now rather than merely requested configuration. Use the appropriate method: Inspect the operational state datastore or state-oriented CLI view. Observe the relevant forwarding/control-plane behavior under the approved test.

B:

“Replace the interface with a loopback to create an up indicator” targets a different operation from the reported requirement: “an operator needs live interface operational data rather than only intended settings”. Operational state exposes what the system reports now rather than merely requested configuration. Use the appropriate method: Inspect the operational state datastore or state-oriented CLI view. Observe the relevant forwarding/control-plane behavior under the approved test.

D:

“Check only user role names to determine physical link health” targets a different operation from the reported requirement: “an operator needs live interface operational data rather than only intended settings”. Operational state exposes what the system reports now rather than merely requested configuration. Use the appropriate method: Inspect the operational state datastore or state-oriented CLI view. Observe the relevant forwarding/control-plane behavior under the approved test.

Question 368

In the fictional Summit-4 west pod, a change-freeze exception for a narrow operational fault, the team reports that the intended fabric topology differs from deployed configuration on several nodes. Which engineering action best satisfies this request?

  1. Use log severity changes as the desired-state data model.
  2. Manually change one switch and assume the whole fabric follows.
  3. Replace all route policies with packet captures.
  4. Use EDA fabric-intent workflows to reconcile desired fabric configuration.

Explanation

Correct Answer

D:

Intent-based automation represents desired outcomes and coordinates enforcement. For Summit-4, confirm the actual outcome: deployed fabric resources converge toward the declared and validated intent.

Incorrect Answers

A:

“Use log severity changes as the desired-state data model” targets a different operation from the reported requirement: “the intended fabric topology differs from deployed configuration on several nodes”. Intent-based automation represents desired outcomes and coordinates enforcement. Use the appropriate method: Use EDA fabric-intent workflows to reconcile desired fabric configuration.

B:

“Manually change one switch and assume the whole fabric follows” targets a different operation from the reported requirement: “the intended fabric topology differs from deployed configuration on several nodes”. Intent-based automation represents desired outcomes and coordinates enforcement. Use the appropriate method: Use EDA fabric-intent workflows to reconcile desired fabric configuration.

C:

“Replace all route policies with packet captures” targets a different operation from the reported requirement: “the intended fabric topology differs from deployed configuration on several nodes”. Intent-based automation represents desired outcomes and coordinates enforcement. Use the appropriate method: Use EDA fabric-intent workflows to reconcile desired fabric configuration.

Question 369

In the fictional Canyon-5 east pod, a fabric operations audit prior to tenant onboarding, the team reports that an EVPN route is visible but is not imported into its intended tenant instance. An unrelated configuration change is being considered. Which focused remediation best addresses the described problem first?

  1. Verify the route-target import and export policy for the target instance.
  2. Raise log severity to turn route import on.
  3. Use the route distinguisher as a substitute for all import policy.
  4. Change the physical switchport speed to import EVPN VPN routes.

Explanation

Correct Answer

A:

Route targets control import/export membership for VPN routing information. The option uses “Verify the route-target import and export policy for the target instance” to address “an EVPN route is visible but is not imported into its intended tenant instance”. The acceptance test is: Verify the route-target import and export policy for the target instance. Before onboarding, test that the intended fabric state exists.

Incorrect Answers

B:

“Raise log severity to turn route import on” targets a different operation from the reported requirement: “an EVPN route is visible but is not imported into its intended tenant instance”. Route targets control import/export membership for VPN routing information. The confirming result is: Verify the route-target import and export policy for the target instance. Before onboarding, test that the intended fabric state exists.

C:

“Use the route distinguisher as a substitute for all import policy” targets a different operation from the reported requirement: “an EVPN route is visible but is not imported into its intended tenant instance”. Route targets control import/export membership for VPN routing information. The confirming result is: Verify the route-target import and export policy for the target instance. Before onboarding, test that the intended fabric state exists.

D:

“Change the physical switchport speed to import EVPN VPN routes” targets a different operation from the reported requirement: “an EVPN route is visible but is not imported into its intended tenant instance”. Route targets control import/export membership for VPN routing information. The confirming result is: Verify the route-target import and export policy for the target instance. Before onboarding, test that the intended fabric state exists.

Question 370

In the fictional Pine-9 west pod, a replacement leaf with configuration review requirements, the team reports that the overlay needs to advertise IP routing reachability beyond individual MAC entries. An unrelated configuration change is being considered. Which focused remediation best addresses the described problem first?

  1. Use only Type 3 membership routes to represent all routed prefixes.
  2. Use appropriate EVPN Type 5 IP prefix advertisements.
  3. Assign a MAC-VRF bridge flood-list in place of an L3 prefix advertisement.
  4. Treat an interface ACL entry as an EVPN IP route.

Explanation

Correct Answer

B:

IP prefix routes advertise Layer 3 destination reachability within EVPN. For Pine-9, confirm the actual outcome: the intended tenant prefix is imported into the right IP-VRF.

Incorrect Answers

A:

“Use only Type 3 membership routes to represent all routed prefixes” targets a different operation from the reported requirement: “the overlay needs to advertise IP routing reachability beyond individual MAC entries”. IP prefix routes advertise Layer 3 destination reachability within EVPN. Use the appropriate method: Use appropriate EVPN Type 5 IP prefix advertisements. Confirm that the replacement leaf reaches the expected operational state.

C:

“Assign a MAC-VRF bridge flood-list in place of an L3 prefix advertisement” targets a different operation from the reported requirement: “the overlay needs to advertise IP routing reachability beyond individual MAC entries”. IP prefix routes advertise Layer 3 destination reachability within EVPN. Use the appropriate method: Use appropriate EVPN Type 5 IP prefix advertisements. Confirm that the replacement leaf reaches the expected operational state.

D:

“Treat an interface ACL entry as an EVPN IP route” targets a different operation from the reported requirement: “the overlay needs to advertise IP routing reachability beyond individual MAC entries”. IP prefix routes advertise Layer 3 destination reachability within EVPN. Use the appropriate method: Use appropriate EVPN Type 5 IP prefix advertisements. Confirm that the replacement leaf reaches the expected operational state.

Nokia Data Center Fabric Fundamentals (4A0-D01) Practice Tests