mcAfee Secure Website
exam =5
exam =6

Exam Code: 4A0-D01

Exam Name: Nokia Data Center Fabric Fundamentals

Certification Provider: Nokia

Nokia 4A0-D01 Questions & Answers

Reliable & Actual Study Materials for 4A0-D01 Exam Success

61 Questions & Answers with Testing Engine

"4A0-D01: Nokia Data Center Fabric Fundamentals" Testing Engine covers all the knowledge points of the real Nokia 4A0-D01 exam.

The latest actual 4A0-D01 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at 4A0-D01 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Nokia Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Nokia 4A0-D01 Practice Test 36

Question 350

In the fictional Delta-6 west pod, a controller-managed extension requiring reproducible evidence, the team reports that the fabric must limit large shared Layer 2 failure domains. The planned change is "Use Layer 3 routed links between leaf and spine switches." Which post-change observation best validates the intended technical behavior?

  1. Check only that the device hostname is listed in the inventory, without examining routed fabric underlay behavior.
  2. Verify that routed underlay next hops reach all required VTEPs.
  3. Use an unrelated tenant dashboard as proof, without verifying the required routed fabric underlay condition.
  4. Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior.

Explanation

Correct Answer

B:

A routed underlay confines broadcast domains and supplies IP reachability for the overlay. The option uses “Verify that routed underlay next hops reach all required VTEPs” to address “the fabric must limit large shared Layer 2 failure domains”. The acceptance test is: routed underlay next hops reach all required VTEPs.

Incorrect Answers

A:

“Check only that the device hostname is listed in the inventory, without examining routed fabric underlay behavior” targets a different operation from the reported requirement: “the fabric must limit large shared Layer 2 failure domains”. A routed underlay confines broadcast domains and supplies IP reachability for the overlay. The confirming result is: routed underlay next hops reach all required VTEPs.

C:

“Use an unrelated tenant dashboard as proof, without verifying the required routed fabric underlay condition” targets a different operation from the reported requirement: “the fabric must limit large shared Layer 2 failure domains”. A routed underlay confines broadcast domains and supplies IP reachability for the overlay. The confirming result is: routed underlay next hops reach all required VTEPs.

D:

“Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior” targets a different operation from the reported requirement: “the fabric must limit large shared Layer 2 failure domains”. A routed underlay confines broadcast domains and supplies IP reachability for the overlay. The confirming result is: routed underlay next hops reach all required VTEPs.

Question 351

In the fictional Orchard-3 east pod, a lab-to-production migration after a successful canary, the team reports that remote tenant hosts in one subnet need bridged reachability over VXLAN. The planned change is "Build the MAC-VRF based L2 EVPN-VXLAN service with consistent identifiers." Which post-change observation best validates the intended technical behavior?

  1. Use an unrelated tenant dashboard as proof, without verifying the required layer 2 evpn service condition.
  2. Check only that the device hostname is listed in the inventory, without examining layer 2 evpn service behavior.
  3. Verify that local and remote tenant MAC learning is correct with no unplanned cross-tenant leakage.
  4. Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior.

Explanation

Correct Answer

C:

L2 EVPN couples tenant bridging with distributed MAC reachability and VXLAN transport. The option uses “Verify that local and remote tenant MAC learning is correct with no unplanned cross-tenant leakage” to address “remote tenant hosts in one subnet need bridged reachability over VXLAN”. The acceptance test is: local and remote tenant MAC learning is correct with no unplanned cross-tenant leakage. For the staged migration, validate the affected path before expansion.

Incorrect Answers

A:

“Use an unrelated tenant dashboard as proof, without verifying the required layer 2 evpn service condition” targets a different operation from the reported requirement: “remote tenant hosts in one subnet need bridged reachability over VXLAN”. L2 EVPN couples tenant bridging with distributed MAC reachability and VXLAN transport. The confirming result is: local and remote tenant MAC learning is correct with no unplanned cross-tenant leakage. For the staged migration, validate the affected path before expansion.

B:

“Check only that the device hostname is listed in the inventory, without examining layer 2 evpn service behavior” targets a different operation from the reported requirement: “remote tenant hosts in one subnet need bridged reachability over VXLAN”. L2 EVPN couples tenant bridging with distributed MAC reachability and VXLAN transport. The confirming result is: local and remote tenant MAC learning is correct with no unplanned cross-tenant leakage. For the staged migration, validate the affected path before expansion.

D:

“Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior” targets a different operation from the reported requirement: “remote tenant hosts in one subnet need bridged reachability over VXLAN”. L2 EVPN couples tenant bridging with distributed MAC reachability and VXLAN transport. The confirming result is: local and remote tenant MAC learning is correct with no unplanned cross-tenant leakage. For the staged migration, validate the affected path before expansion.

Question 352

In the fictional Pine-9 west pod, a replacement leaf with configuration review requirements, the team reports that a leaf port must carry separate tagged tenant attachment networks. Which engineering action best satisfies this request?

  1. Put all tenants into one untagged subinterface without segmentation.
  2. Configure a VXLAN VNI as a physical Ethernet speed.
  3. Use a BGP local preference as a VLAN identifier.
  4. Define matching VLAN-tagged subinterfaces with the correct encapsulation.

Explanation

Correct Answer

D:

Subinterfaces permit explicit per-tag service attachment on an interface. For Pine-9, confirm the actual outcome: the expected tags and subinterfaces appear in the attachment configuration and traffic counters.

Incorrect Answers

A:

“Put all tenants into one untagged subinterface without segmentation” targets a different operation from the reported requirement: “a leaf port must carry separate tagged tenant attachment networks”. Subinterfaces permit explicit per-tag service attachment on an interface. Use the appropriate method: Define matching VLAN-tagged subinterfaces with the correct encapsulation. Confirm that the replacement leaf reaches the expected operational state.

B:

“Configure a VXLAN VNI as a physical Ethernet speed” targets a different operation from the reported requirement: “a leaf port must carry separate tagged tenant attachment networks”. Subinterfaces permit explicit per-tag service attachment on an interface. Use the appropriate method: Define matching VLAN-tagged subinterfaces with the correct encapsulation. Confirm that the replacement leaf reaches the expected operational state.

C:

“Use a BGP local preference as a VLAN identifier” targets a different operation from the reported requirement: “a leaf port must carry separate tagged tenant attachment networks”. Subinterfaces permit explicit per-tag service attachment on an interface. Use the appropriate method: Define matching VLAN-tagged subinterfaces with the correct encapsulation. Confirm that the replacement leaf reaches the expected operational state.

Question 353

In the fictional Canyon-5 east pod, a fabric operations audit prior to tenant onboarding, the team reports that management access to the switch itself must be restricted. The shift handoff must specify a defensible solution and the observable service outcome. Which recommendation is technically justified?

  1. Use the applicable system ACL or management-access policy for device-bound traffic.
  2. Use only a tenant interface ACL and assume it protects all device management.
  3. Change a VXLAN VNI as an SSH authentication filter.
  4. Disable tenant EVPN routes to secure the management endpoint.

Explanation

Correct Answer

A:

System-level access filtering concerns traffic destined to the device, not just transit services. The option uses “Use the applicable system ACL or management-access policy for device-bound traffic” to address “management access to the switch itself must be restricted”. The result must be observed on the affected component. Before onboarding, test that the intended fabric state exists.

Incorrect Answers

B:

“Use only a tenant interface ACL and assume it protects all device management” targets a different operation from the reported requirement: “management access to the switch itself must be restricted”. System-level access filtering concerns traffic destined to the device, not just transit services. Use the appropriate method: Use the applicable system ACL or management-access policy for device-bound traffic. Before onboarding, test that the intended fabric state exists.

C:

“Change a VXLAN VNI as an SSH authentication filter” targets a different operation from the reported requirement: “management access to the switch itself must be restricted”. System-level access filtering concerns traffic destined to the device, not just transit services. Use the appropriate method: Use the applicable system ACL or management-access policy for device-bound traffic. Before onboarding, test that the intended fabric state exists.

D:

“Disable tenant EVPN routes to secure the management endpoint” targets a different operation from the reported requirement: “management access to the switch itself must be restricted”. System-level access filtering concerns traffic destined to the device, not just transit services. Use the appropriate method: Use the applicable system ACL or management-access policy for device-bound traffic. Before onboarding, test that the intended fabric state exists.

Question 354

In the fictional Harbor-1 west pod, a staged top-of-rack rollout with a bounded maintenance window, the team reports that traffic must route between tenant subnets while maintaining VRF isolation across VTEPs. A peer suggested: "Remove the IP-VRF and route all tenants in a single default instance" That did not solve the constraint. What should be chosen instead?

  1. Use a CLI alias as the inter-subnet forwarding method.
  2. Use a correctly designed symmetric IRB L3 EVPN routing model.
  3. Require destination-VLAN bridge membership at every intermediary hop.
  4. Remove the IP-VRF and route all tenants in a single default instance.

Explanation

Correct Answer

B:

Symmetric IRB uses distributed tenant routing constructs to support inter-subnet traffic over the overlay. The option uses “Use a correctly designed symmetric IRB L3 EVPN routing model” to address “traffic must route between tenant subnets while maintaining VRF isolation across VTEPs”. The result must be observed on the affected component.

Incorrect Answers

A:

“Use a CLI alias as the inter-subnet forwarding method” targets a different operation from the reported requirement: “traffic must route between tenant subnets while maintaining VRF isolation across VTEPs”. Symmetric IRB uses distributed tenant routing constructs to support inter-subnet traffic over the overlay. Use the appropriate method: Use a correctly designed symmetric IRB L3 EVPN routing model.

C:

“Require destination-VLAN bridge membership at every intermediary hop” targets a different operation from the reported requirement: “traffic must route between tenant subnets while maintaining VRF isolation across VTEPs”. Symmetric IRB uses distributed tenant routing constructs to support inter-subnet traffic over the overlay. Use the appropriate method: Use a correctly designed symmetric IRB L3 EVPN routing model.

D:

“Remove the IP-VRF and route all tenants in a single default instance” targets a different operation from the reported requirement: “traffic must route between tenant subnets while maintaining VRF isolation across VTEPs”. Symmetric IRB uses distributed tenant routing constructs to support inter-subnet traffic over the overlay. Use the appropriate method: Use a correctly designed symmetric IRB L3 EVPN routing model.

Question 355

In the fictional Summit-4 west pod, a change-freeze exception for a narrow operational fault, the team reports that an automation system needs structured streaming device state. A peer suggested: "Run a human terminal screenshot macro as the only telemetry feed" That did not solve the constraint. What should be chosen instead?

  1. Encode syslog output as a replacement for interface state models.
  2. Run a human terminal screenshot macro as the only telemetry feed.
  3. Use a supported gNMI subscription or retrieval interface.
  4. Infer device counters from route-target strings.

Explanation

Correct Answer

C:

GNMI provides a model-driven management path for configuration and telemetry. The option uses “Use a supported gNMI subscription or retrieval interface” to address “an automation system needs structured streaming device state”. The result must be observed on the affected component.

Incorrect Answers

A:

“Encode syslog output as a replacement for interface state models” targets a different operation from the reported requirement: “an automation system needs structured streaming device state”. GNMI provides a model-driven management path for configuration and telemetry. Use the appropriate method: Use a supported gNMI subscription or retrieval interface.

B:

“Run a human terminal screenshot macro as the only telemetry feed” targets a different operation from the reported requirement: “an automation system needs structured streaming device state”. GNMI provides a model-driven management path for configuration and telemetry. Use the appropriate method: Use a supported gNMI subscription or retrieval interface.

D:

“Infer device counters from route-target strings” targets a different operation from the reported requirement: “an automation system needs structured streaming device state”. GNMI provides a model-driven management path for configuration and telemetry. Use the appropriate method: Use a supported gNMI subscription or retrieval interface.

Question 356

In the fictional Metro-8 east pod, a multi-tenant fabric undergoing documented validation, the team reports that two remote VTEPs must carry a tenant overlay across routed links. An unrelated configuration change is being considered. Which focused remediation best addresses the described problem first?

  1. Convert every spine interface to an untagged access port.
  2. Use BFD alone as a replacement for VXLAN packet encapsulation.
  3. Treat the tenant service route target as an underlay IP gateway.
  4. Configure matching VTEP reachability and VXLAN overlay endpoint settings.

Explanation

Correct Answer

D:

VTEPs encapsulate and decapsulate VXLAN traffic using reachable outer IP endpoints. The option uses “Configure matching VTEP reachability and VXLAN overlay endpoint settings” to address “two remote VTEPs must carry a tenant overlay across routed links”. The result must be observed on the affected component. Observe the relevant forwarding/control-plane behavior under the approved test.

Incorrect Answers

A:

“Convert every spine interface to an untagged access port” targets a different operation from the reported requirement: “two remote VTEPs must carry a tenant overlay across routed links”. VTEPs encapsulate and decapsulate VXLAN traffic using reachable outer IP endpoints. Use the appropriate method: Configure matching VTEP reachability and VXLAN overlay endpoint settings. Observe the relevant forwarding/control-plane behavior under the approved test.

B:

“Use BFD alone as a replacement for VXLAN packet encapsulation” targets a different operation from the reported requirement: “two remote VTEPs must carry a tenant overlay across routed links”. VTEPs encapsulate and decapsulate VXLAN traffic using reachable outer IP endpoints. Use the appropriate method: Configure matching VTEP reachability and VXLAN overlay endpoint settings. Observe the relevant forwarding/control-plane behavior under the approved test.

C:

“Treat the tenant service route target as an underlay IP gateway” targets a different operation from the reported requirement: “two remote VTEPs must carry a tenant overlay across routed links”. VTEPs encapsulate and decapsulate VXLAN traffic using reachable outer IP endpoints. Use the appropriate method: Configure matching VTEP reachability and VXLAN overlay endpoint settings. Observe the relevant forwarding/control-plane behavior under the approved test.

Question 357

In the fictional Summit-4 west pod, a change-freeze exception for a narrow operational fault, the team reports that a control protocol is intermittently dropped after aggressive protection settings. An unrelated configuration change is being considered. Which focused remediation best addresses the described problem first?

  1. Review CPM classification and policer rates against required control traffic.
  2. Increase interface CRC counters manually to hide packet drops.
  3. Change the system time zone to eliminate policing.
  4. Disable every routing policy to bypass CPU filtering.

Explanation

Correct Answer

A:

Correctly scoped policing balances CPU protection with valid protocol liveliness. For Summit-4, confirm the actual outcome: policer statistics and protocol session health match expected traffic rates.

Incorrect Answers

B:

“Increase interface CRC counters manually to hide packet drops” targets a different operation from the reported requirement: “a control protocol is intermittently dropped after aggressive protection settings”. Correctly scoped policing balances CPU protection with valid protocol liveliness. Use the appropriate method: Review CPM classification and policer rates against required control traffic.

C:

“Change the system time zone to eliminate policing” targets a different operation from the reported requirement: “a control protocol is intermittently dropped after aggressive protection settings”. Correctly scoped policing balances CPU protection with valid protocol liveliness. Use the appropriate method: Review CPM classification and policer rates against required control traffic.

D:

“Disable every routing policy to bypass CPU filtering” targets a different operation from the reported requirement: “a control protocol is intermittently dropped after aggressive protection settings”. Correctly scoped policing balances CPU protection with valid protocol liveliness. Use the appropriate method: Review CPM classification and policer rates against required control traffic.

Question 358

In the fictional Pine-9 east pod, a replacement leaf with configuration review requirements, the team reports that operations need repeatable tenant service deployment across the fabric. The shift handoff must specify a defensible solution and the observable service outcome. Which recommendation is technically justified?

  1. Use syslog text as the only authoritative tenant service configuration.
  2. Use EDA service-intent definitions with controlled reconciliation.
  3. Turn off remote EVPN route exchange and declare the service deployed.
  4. Change one access VLAN manually without representing service dependencies.

Explanation

Correct Answer

B:

Service intent captures desired network service state across participating resources. The option uses “Use EDA service-intent definitions with controlled reconciliation” to address “operations need repeatable tenant service deployment across the fabric”. The result must be observed on the affected component. Confirm that the replacement leaf reaches the expected operational state.

Incorrect Answers

A:

“Use syslog text as the only authoritative tenant service configuration” targets a different operation from the reported requirement: “operations need repeatable tenant service deployment across the fabric”. Service intent captures desired network service state across participating resources. Use the appropriate method: Use EDA service-intent definitions with controlled reconciliation. Confirm that the replacement leaf reaches the expected operational state.

C:

“Turn off remote EVPN route exchange and declare the service deployed” targets a different operation from the reported requirement: “operations need repeatable tenant service deployment across the fabric”. Service intent captures desired network service state across participating resources. Use the appropriate method: Use EDA service-intent definitions with controlled reconciliation. Confirm that the replacement leaf reaches the expected operational state.

D:

“Change one access VLAN manually without representing service dependencies” targets a different operation from the reported requirement: “operations need repeatable tenant service deployment across the fabric”. Service intent captures desired network service state across participating resources. Use the appropriate method: Use EDA service-intent definitions with controlled reconciliation. Confirm that the replacement leaf reaches the expected operational state.

Question 359

In the fictional North-10 east pod, a commissioning exercise under the on-call team, the team reports that a change should be evaluated before it reaches the active device configuration. The shift handoff must specify a defensible solution and the observable service outcome. Which recommendation is technically justified?

  1. Assume a text editor changes active SR Linux state automatically.
  2. Use a packet capture as the configuration transaction.
  3. Make the edits in the candidate configuration workflow and review before commit.
  4. Modify archived syslog entries instead of the candidate datastore.

Explanation

Correct Answer

C:

A candidate workflow separates proposed changes from committed running state. The option uses “Make the edits in the candidate configuration workflow and review before commit” to address “a change should be evaluated before it reaches the active device configuration”. The result must be observed on the affected component. Before onboarding, test that the intended fabric state exists.

Incorrect Answers

A:

“Assume a text editor changes active SR Linux state automatically” targets a different operation from the reported requirement: “a change should be evaluated before it reaches the active device configuration”. A candidate workflow separates proposed changes from committed running state. Use the appropriate method: Make the edits in the candidate configuration workflow and review before commit. Before onboarding, test that the intended fabric state exists.

B:

“Use a packet capture as the configuration transaction” targets a different operation from the reported requirement: “a change should be evaluated before it reaches the active device configuration”. A candidate workflow separates proposed changes from committed running state. Use the appropriate method: Make the edits in the candidate configuration workflow and review before commit. Before onboarding, test that the intended fabric state exists.

D:

“Modify archived syslog entries instead of the candidate datastore” targets a different operation from the reported requirement: “a change should be evaluated before it reaches the active device configuration”. A candidate workflow separates proposed changes from committed running state. Use the appropriate method: Make the edits in the candidate configuration workflow and review before commit. Before onboarding, test that the intended fabric state exists.

Question 360

In the fictional Metro-8 east pod, a multi-tenant fabric undergoing documented validation, the team reports that a short incident window requires evidence of selected packets without broad logging. The planned change is "Use a scoped SR Linux capture filter and inspect the captured traffic." Which post-change observation best validates the intended technical behavior?

  1. Use an unrelated tenant dashboard as proof, without verifying the required capture filters condition.
  2. Check only that the device hostname is listed in the inventory, without examining capture filters behavior.
  3. Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior.
  4. Verify that the capture contains relevant matching frames from the requested interface or path.

Explanation

Correct Answer

D:

Capture filters select packet observations for troubleshooting rather than changing policy by themselves. The option uses “Verify that the capture contains relevant matching frames from the requested interface or path” to address “a short incident window requires evidence of selected packets without broad logging”. The acceptance test is: the capture contains relevant matching frames from the requested interface or path. Observe the relevant forwarding/control-plane behavior under the approved test.

Incorrect Answers

A:

“Use an unrelated tenant dashboard as proof, without verifying the required capture filters condition” targets a different operation from the reported requirement: “a short incident window requires evidence of selected packets without broad logging”. Capture filters select packet observations for troubleshooting rather than changing policy by themselves. The confirming result is: the capture contains relevant matching frames from the requested interface or path. Observe the relevant forwarding/control-plane behavior under the approved test.

B:

“Check only that the device hostname is listed in the inventory, without examining capture filters behavior” targets a different operation from the reported requirement: “a short incident window requires evidence of selected packets without broad logging”. Capture filters select packet observations for troubleshooting rather than changing policy by themselves. The confirming result is: the capture contains relevant matching frames from the requested interface or path. Observe the relevant forwarding/control-plane behavior under the approved test.

C:

“Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior” targets a different operation from the reported requirement: “a short incident window requires evidence of selected packets without broad logging”. Capture filters select packet observations for troubleshooting rather than changing policy by themselves. The confirming result is: the capture contains relevant matching frames from the requested interface or path. Observe the relevant forwarding/control-plane behavior under the approved test.

Nokia Data Center Fabric Fundamentals (4A0-D01) Practice Tests