mcAfee Secure Website
exam =5
exam =6

Exam Code: 4A0-D01

Exam Name: Nokia Data Center Fabric Fundamentals

Certification Provider: Nokia

Nokia 4A0-D01 Questions & Answers

Reliable & Actual Study Materials for 4A0-D01 Exam Success

61 Questions & Answers with Testing Engine

"4A0-D01: Nokia Data Center Fabric Fundamentals" Testing Engine covers all the knowledge points of the real Nokia 4A0-D01 exam.

The latest actual 4A0-D01 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at 4A0-D01 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Nokia Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Nokia 4A0-D01 Practice Test 35

Question 340

In the fictional Orchard-3 west pod, a lab-to-production migration after a successful canary, the team reports that a VXLAN endpoint sourced from a loopback address is unreachable. A peer suggested: "Advertise only a tenant MAC and ignore underlay reachability" That did not solve the constraint. What should be chosen instead?

  1. Use a log severity filter as the reachability repair.
  2. Advertise only a tenant MAC and ignore underlay reachability.
  3. Rename the loopback without updating any IP routes.
  4. Ensure the loopback endpoint address is advertised and routed in the underlay.

Explanation

Correct Answer

D:

Loopback-based tunnel endpoints require routed transport reachability. The option uses “Ensure the loopback endpoint address is advertised and routed in the underlay” to address “a VXLAN endpoint sourced from a loopback address is unreachable”. The acceptance test is: the remote endpoint loopback resolves through valid underlay routes. For the staged migration, validate the affected path before expansion.

Incorrect Answers

A:

“Use a log severity filter as the reachability repair” targets a different operation from the reported requirement: “a VXLAN endpoint sourced from a loopback address is unreachable”. Loopback-based tunnel endpoints require routed transport reachability. The confirming result is: the remote endpoint loopback resolves through valid underlay routes. For the staged migration, validate the affected path before expansion.

B:

“Advertise only a tenant MAC and ignore underlay reachability” targets a different operation from the reported requirement: “a VXLAN endpoint sourced from a loopback address is unreachable”. Loopback-based tunnel endpoints require routed transport reachability. The confirming result is: the remote endpoint loopback resolves through valid underlay routes. For the staged migration, validate the affected path before expansion.

C:

“Rename the loopback without updating any IP routes” targets a different operation from the reported requirement: “a VXLAN endpoint sourced from a loopback address is unreachable”. Loopback-based tunnel endpoints require routed transport reachability. The confirming result is: the remote endpoint loopback resolves through valid underlay routes. For the staged migration, validate the affected path before expansion.

Question 341

In the fictional Canyon-5 east pod, a fabric operations audit prior to tenant onboarding, the team reports that IPv6 traffic fails while IPv4 routes to the same leaf are healthy. The planned change is "Inspect the IPv6 address-family routes and next-hop resolution separately." Which post-change observation best validates the intended technical behavior?

  1. Verify that the IPv6 destination and next hop are installed in the intended route table.
  2. Use an unrelated tenant dashboard as proof, without verifying the required ip address family scope condition.
  3. Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior.
  4. Check only that the device hostname is listed in the inventory, without examining ip address family scope behavior.

Explanation

Correct Answer

A:

The two IP address families have distinct routes and reachability requirements. The option uses “Verify that the IPv6 destination and next hop are installed in the intended route table” to address “IPv6 traffic fails while IPv4 routes to the same leaf are healthy”. The acceptance test is: the IPv6 destination and next hop are installed in the intended route table. Before onboarding, test that the intended fabric state exists.

Incorrect Answers

B:

“Use an unrelated tenant dashboard as proof, without verifying the required ip address family scope condition” targets a different operation from the reported requirement: “IPv6 traffic fails while IPv4 routes to the same leaf are healthy”. The two IP address families have distinct routes and reachability requirements. The confirming result is: the IPv6 destination and next hop are installed in the intended route table. Before onboarding, test that the intended fabric state exists.

C:

“Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior” targets a different operation from the reported requirement: “IPv6 traffic fails while IPv4 routes to the same leaf are healthy”. The two IP address families have distinct routes and reachability requirements. The confirming result is: the IPv6 destination and next hop are installed in the intended route table. Before onboarding, test that the intended fabric state exists.

D:

“Check only that the device hostname is listed in the inventory, without examining ip address family scope behavior” targets a different operation from the reported requirement: “IPv6 traffic fails while IPv4 routes to the same leaf are healthy”. The two IP address families have distinct routes and reachability requirements. The confirming result is: the IPv6 destination and next hop are installed in the intended route table. Before onboarding, test that the intended fabric state exists.

Question 342

In the fictional Summit-4 west pod, a change-freeze exception for a narrow operational fault, the team reports that traffic uses a tenant VRF but only the default route table was examined. An unrelated configuration change is being considered. Which focused remediation best addresses the described problem first?

  1. Assume default-instance routes always show tenant decisions.
  2. Inspect the forwarding and routing tables inside the actual tenant IP-VRF.
  3. Check an unrelated MAC-VRF as the IPv4 lookup table.
  4. Change the transport MTU without inspecting the tenant route.

Explanation

Correct Answer

B:

VRF-specific forwarding decisions require examining the correct routing instance. For Summit-4, confirm the actual outcome: the destination is resolved in the intended tenant IP-VRF.

Incorrect Answers

A:

“Assume default-instance routes always show tenant decisions” targets a different operation from the reported requirement: “traffic uses a tenant VRF but only the default route table was examined”. VRF-specific forwarding decisions require examining the correct routing instance. Use the appropriate method: Inspect the forwarding and routing tables inside the actual tenant IP-VRF.

C:

“Check an unrelated MAC-VRF as the IPv4 lookup table” targets a different operation from the reported requirement: “traffic uses a tenant VRF but only the default route table was examined”. VRF-specific forwarding decisions require examining the correct routing instance. Use the appropriate method: Inspect the forwarding and routing tables inside the actual tenant IP-VRF.

D:

“Change the transport MTU without inspecting the tenant route” targets a different operation from the reported requirement: “traffic uses a tenant VRF but only the default route table was examined”. VRF-specific forwarding decisions require examining the correct routing instance. Use the appropriate method: Inspect the forwarding and routing tables inside the actual tenant IP-VRF.

Question 343

In the fictional North-10 east pod, a commissioning exercise under the on-call team, the team reports that a high-volume overlay segment has excessive ARP or ND flooding. The planned change is "Evaluate supported EVPN endpoint information and proxy or suppression features." Which post-change observation best validates the intended technical behavior?

  1. Use an unrelated tenant dashboard as proof, without verifying the required neighbor discovery optimization condition.
  2. Check only that the device hostname is listed in the inventory, without examining neighbor discovery optimization behavior.
  3. Verify that known remote endpoint resolution succeeds with reduced unnecessary flood traffic.
  4. Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior.

Explanation

Correct Answer

C:

Distributed endpoint information may reduce unnecessary ARP/ND flooding when supported and configured. The option uses “Verify that known remote endpoint resolution succeeds with reduced unnecessary flood traffic” to address “a high-volume overlay segment has excessive ARP or ND flooding”. The acceptance test is: known remote endpoint resolution succeeds with reduced unnecessary flood traffic. Before onboarding, test that the intended fabric state exists.

Incorrect Answers

A:

“Use an unrelated tenant dashboard as proof, without verifying the required neighbor discovery optimization condition” targets a different operation from the reported requirement: “a high-volume overlay segment has excessive ARP or ND flooding”. Distributed endpoint information may reduce unnecessary ARP/ND flooding when supported and configured. The confirming result is: known remote endpoint resolution succeeds with reduced unnecessary flood traffic. Before onboarding, test that the intended fabric state exists.

B:

“Check only that the device hostname is listed in the inventory, without examining neighbor discovery optimization behavior” targets a different operation from the reported requirement: “a high-volume overlay segment has excessive ARP or ND flooding”. Distributed endpoint information may reduce unnecessary ARP/ND flooding when supported and configured. The confirming result is: known remote endpoint resolution succeeds with reduced unnecessary flood traffic. Before onboarding, test that the intended fabric state exists.

D:

“Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior” targets a different operation from the reported requirement: “a high-volume overlay segment has excessive ARP or ND flooding”. Distributed endpoint information may reduce unnecessary ARP/ND flooding when supported and configured. The confirming result is: known remote endpoint resolution succeeds with reduced unnecessary flood traffic. Before onboarding, test that the intended fabric state exists.

Question 344

In the fictional Ridge-2 east pod, a secondary data hall with tenant isolation requirements, the team reports that a remote overlay endpoint cannot be reached over the physical fabric. A peer suggested: "Change the application hostname while leaving the network unchanged" That did not solve the constraint. What should be chosen instead?

  1. Change the application hostname while leaving the network unchanged.
  2. Recreate the tenant VLAN without checking IP reachability.
  3. Disable BGP EVPN to hide underlay route loss.
  4. Restore IP routing reachability to the remote VTEP address in the underlay.

Explanation

Correct Answer

D:

An overlay packet still needs an IP path to its outer tunnel destination. For Ridge-2, confirm the actual outcome: the remote VTEP loopback is reachable through the intended underlay route.

Incorrect Answers

A:

“Change the application hostname while leaving the network unchanged” targets a different operation from the reported requirement: “a remote overlay endpoint cannot be reached over the physical fabric”. An overlay packet still needs an IP path to its outer tunnel destination. Use the appropriate method: Restore IP routing reachability to the remote VTEP address in the underlay.

B:

“Recreate the tenant VLAN without checking IP reachability” targets a different operation from the reported requirement: “a remote overlay endpoint cannot be reached over the physical fabric”. An overlay packet still needs an IP path to its outer tunnel destination. Use the appropriate method: Restore IP routing reachability to the remote VTEP address in the underlay.

C:

“Disable BGP EVPN to hide underlay route loss” targets a different operation from the reported requirement: “a remote overlay endpoint cannot be reached over the physical fabric”. An overlay packet still needs an IP path to its outer tunnel destination. Use the appropriate method: Restore IP routing reachability to the remote VTEP address in the underlay.

Question 345

In the fictional Ridge-2 west pod, a secondary data hall with tenant isolation requirements, the team reports that newly powered switches should receive initial configuration with minimal manual access. The planned change is "Provide the required ZTP discovery and bootstrap information through supported services." Which post-change observation best validates the intended technical behavior?

  1. Verify that the device discovers its bootstrap source and applies the intended initial configuration.
  2. Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior.
  3. Check only that the device hostname is listed in the inventory, without examining zero-touch bootstrap behavior.
  4. Use an unrelated tenant dashboard as proof, without verifying the required zero-touch bootstrap condition.

Explanation

Correct Answer

A:

ZTP depends on reachable bootstrap infrastructure and device discovery behavior. The option uses “Verify that the device discovers its bootstrap source and applies the intended initial configuration” to address “newly powered switches should receive initial configuration with minimal manual access”. The acceptance test is: the device discovers its bootstrap source and applies the intended initial configuration.

Incorrect Answers

B:

“Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior” targets a different operation from the reported requirement: “newly powered switches should receive initial configuration with minimal manual access”. ZTP depends on reachable bootstrap infrastructure and device discovery behavior. The confirming result is: the device discovers its bootstrap source and applies the intended initial configuration.

C:

“Check only that the device hostname is listed in the inventory, without examining zero-touch bootstrap behavior” targets a different operation from the reported requirement: “newly powered switches should receive initial configuration with minimal manual access”. ZTP depends on reachable bootstrap infrastructure and device discovery behavior. The confirming result is: the device discovers its bootstrap source and applies the intended initial configuration.

D:

“Use an unrelated tenant dashboard as proof, without verifying the required zero-touch bootstrap condition” targets a different operation from the reported requirement: “newly powered switches should receive initial configuration with minimal manual access”. ZTP depends on reachable bootstrap infrastructure and device discovery behavior. The confirming result is: the device discovers its bootstrap source and applies the intended initial configuration.

Question 346

In the fictional Orchard-3 east pod, a lab-to-production migration after a successful canary, the team reports that two tenant Layer 2 segments need extension across a routed IP fabric. Which engineering action best satisfies this request?

  1. Use BGP alone as the packet data tunnel.
  2. Use VXLAN encapsulation between reachable VTEPs.
  3. Route raw Ethernet frames as unencapsulated IP datagrams.
  4. Make all physical spine links carry the tenant access VLAN.

Explanation

Correct Answer

B:

VXLAN carries tenant frames inside outer IP/UDP transport across the routed fabric. The option uses “Use VXLAN encapsulation between reachable VTEPs” to address “two tenant Layer 2 segments need extension across a routed IP fabric”. The acceptance test is: packet traces show VXLAN encapsulation between the expected VTEPs. For the staged migration, validate the affected path before expansion.

Incorrect Answers

A:

“Use BGP alone as the packet data tunnel” targets a different operation from the reported requirement: “two tenant Layer 2 segments need extension across a routed IP fabric”. VXLAN carries tenant frames inside outer IP/UDP transport across the routed fabric. The confirming result is: packet traces show VXLAN encapsulation between the expected VTEPs. For the staged migration, validate the affected path before expansion.

C:

“Route raw Ethernet frames as unencapsulated IP datagrams” targets a different operation from the reported requirement: “two tenant Layer 2 segments need extension across a routed IP fabric”. VXLAN carries tenant frames inside outer IP/UDP transport across the routed fabric. The confirming result is: packet traces show VXLAN encapsulation between the expected VTEPs. For the staged migration, validate the affected path before expansion.

D:

“Make all physical spine links carry the tenant access VLAN” targets a different operation from the reported requirement: “two tenant Layer 2 segments need extension across a routed IP fabric”. VXLAN carries tenant frames inside outer IP/UDP transport across the routed fabric. The confirming result is: packet traces show VXLAN encapsulation between the expected VTEPs. For the staged migration, validate the affected path before expansion.

Question 347

In the fictional Canyon-5 west pod, a fabric operations audit prior to tenant onboarding, the team reports that two remote VTEPs must carry a tenant overlay across routed links. Which engineering action best satisfies this request?

  1. Treat the tenant service route target as an underlay IP gateway.
  2. Use BFD alone as a replacement for VXLAN packet encapsulation.
  3. Configure matching VTEP reachability and VXLAN overlay endpoint settings.
  4. Convert every spine interface to an untagged access port.

Explanation

Correct Answer

C:

VTEPs encapsulate and decapsulate VXLAN traffic using reachable outer IP endpoints. For Canyon-5, confirm the actual outcome: the configured endpoints exchange tenant traffic over reachable underlay paths.

Incorrect Answers

A:

“Treat the tenant service route target as an underlay IP gateway” targets a different operation from the reported requirement: “two remote VTEPs must carry a tenant overlay across routed links”. VTEPs encapsulate and decapsulate VXLAN traffic using reachable outer IP endpoints. Use the appropriate method: Configure matching VTEP reachability and VXLAN overlay endpoint settings. Before onboarding, test that the intended fabric state exists.

B:

“Use BFD alone as a replacement for VXLAN packet encapsulation” targets a different operation from the reported requirement: “two remote VTEPs must carry a tenant overlay across routed links”. VTEPs encapsulate and decapsulate VXLAN traffic using reachable outer IP endpoints. Use the appropriate method: Configure matching VTEP reachability and VXLAN overlay endpoint settings. Before onboarding, test that the intended fabric state exists.

D:

“Convert every spine interface to an untagged access port” targets a different operation from the reported requirement: “two remote VTEPs must carry a tenant overlay across routed links”. VTEPs encapsulate and decapsulate VXLAN traffic using reachable outer IP endpoints. Use the appropriate method: Configure matching VTEP reachability and VXLAN overlay endpoint settings. Before onboarding, test that the intended fabric state exists.

Question 348

In the fictional Metro-8 west pod, a multi-tenant fabric undergoing documented validation, the team reports that a newly installed switchport is administratively disabled. A peer suggested: "Advertise an EVPN route before enabling the physical port" That did not solve the constraint. What should be chosen instead?

  1. Advertise an EVPN route before enabling the physical port.
  2. Create a BGP route target to power the transceiver.
  3. Change the tenant MAC-VRF without touching the down port.
  4. Enable the appropriate interface in configuration and check its operational status.

Explanation

Correct Answer

D:

Administrative configuration and physical state must both be correct for the port to work. The option uses “Enable the appropriate interface in configuration and check its operational status” to address “a newly installed switchport is administratively disabled”. The result must be observed on the affected component. Observe the relevant forwarding/control-plane behavior under the approved test.

Incorrect Answers

A:

“Advertise an EVPN route before enabling the physical port” targets a different operation from the reported requirement: “a newly installed switchport is administratively disabled”. Administrative configuration and physical state must both be correct for the port to work. Use the appropriate method: Enable the appropriate interface in configuration and check its operational status. Observe the relevant forwarding/control-plane behavior under the approved test.

B:

“Create a BGP route target to power the transceiver” targets a different operation from the reported requirement: “a newly installed switchport is administratively disabled”. Administrative configuration and physical state must both be correct for the port to work. Use the appropriate method: Enable the appropriate interface in configuration and check its operational status. Observe the relevant forwarding/control-plane behavior under the approved test.

C:

“Change the tenant MAC-VRF without touching the down port” targets a different operation from the reported requirement: “a newly installed switchport is administratively disabled”. Administrative configuration and physical state must both be correct for the port to work. Use the appropriate method: Enable the appropriate interface in configuration and check its operational status. Observe the relevant forwarding/control-plane behavior under the approved test.

Question 349

In the fictional Ridge-2 west pod, a secondary data hall with tenant isolation requirements, the team reports that separate customers must not share unintended bridge or routing tables. An unrelated configuration change is being considered. Which focused remediation best addresses the described problem first?

  1. Associate tenant segments with appropriate MAC-VRFs and IP-VRFs.
  2. Put every tenant into the default network instance without controls.
  3. Disable all segmentation and rely on hostnames.
  4. Assign the same L2 broadcast domain to every customer.

Explanation

Correct Answer

A:

Distinct virtual routing and bridging instances provide explicit tenant forwarding boundaries. For Ridge-2, confirm the actual outcome: tenant routes and MACs occur only in the intended network instances.

Incorrect Answers

B:

“Put every tenant into the default network instance without controls” targets a different operation from the reported requirement: “separate customers must not share unintended bridge or routing tables”. Distinct virtual routing and bridging instances provide explicit tenant forwarding boundaries. Use the appropriate method: Associate tenant segments with appropriate MAC-VRFs and IP-VRFs.

C:

“Disable all segmentation and rely on hostnames” targets a different operation from the reported requirement: “separate customers must not share unintended bridge or routing tables”. Distinct virtual routing and bridging instances provide explicit tenant forwarding boundaries. Use the appropriate method: Associate tenant segments with appropriate MAC-VRFs and IP-VRFs.

D:

“Assign the same L2 broadcast domain to every customer” targets a different operation from the reported requirement: “separate customers must not share unintended bridge or routing tables”. Distinct virtual routing and bridging instances provide explicit tenant forwarding boundaries. Use the appropriate method: Associate tenant segments with appropriate MAC-VRFs and IP-VRFs.

Question 350

In the fictional Delta-6 west pod, a controller-managed extension requiring reproducible evidence, the team reports that the fabric must limit large shared Layer 2 failure domains. The planned change is "Use Layer 3 routed links between leaf and spine switches." Which post-change observation best validates the intended technical behavior?

  1. Check only that the device hostname is listed in the inventory, without examining routed fabric underlay behavior.
  2. Verify that routed underlay next hops reach all required VTEPs.
  3. Use an unrelated tenant dashboard as proof, without verifying the required routed fabric underlay condition.
  4. Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior.

Explanation

Correct Answer

B:

A routed underlay confines broadcast domains and supplies IP reachability for the overlay. The option uses “Verify that routed underlay next hops reach all required VTEPs” to address “the fabric must limit large shared Layer 2 failure domains”. The acceptance test is: routed underlay next hops reach all required VTEPs.

Incorrect Answers

A:

“Check only that the device hostname is listed in the inventory, without examining routed fabric underlay behavior” targets a different operation from the reported requirement: “the fabric must limit large shared Layer 2 failure domains”. A routed underlay confines broadcast domains and supplies IP reachability for the overlay. The confirming result is: routed underlay next hops reach all required VTEPs.

C:

“Use an unrelated tenant dashboard as proof, without verifying the required routed fabric underlay condition” targets a different operation from the reported requirement: “the fabric must limit large shared Layer 2 failure domains”. A routed underlay confines broadcast domains and supplies IP reachability for the overlay. The confirming result is: routed underlay next hops reach all required VTEPs.

D:

“Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior” targets a different operation from the reported requirement: “the fabric must limit large shared Layer 2 failure domains”. A routed underlay confines broadcast domains and supplies IP reachability for the overlay. The confirming result is: routed underlay next hops reach all required VTEPs.

Nokia Data Center Fabric Fundamentals (4A0-D01) Practice Tests