mcAfee Secure Website
exam =5
exam =6

Exam Code: 4A0-D01

Exam Name: Nokia Data Center Fabric Fundamentals

Certification Provider: Nokia

Nokia 4A0-D01 Questions & Answers

Reliable & Actual Study Materials for 4A0-D01 Exam Success

61 Questions & Answers with Testing Engine

"4A0-D01: Nokia Data Center Fabric Fundamentals" Testing Engine covers all the knowledge points of the real Nokia 4A0-D01 exam.

The latest actual 4A0-D01 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at 4A0-D01 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Nokia Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Nokia 4A0-D01 Practice Test 23

Question 220

In the fictional Ridge-2 east pod, a secondary data hall with tenant isolation requirements, the team reports that the monitoring platform is flooded with low-priority diagnostic records. A peer suggested: "Drop BGP adjacencies to reduce syslog volume" That did not solve the constraint. What should be chosen instead?

  1. Drop BGP adjacencies to reduce syslog volume.
  2. Change tenant VRFs to control severity thresholds.
  3. Disable all logging including faults and security events.
  4. Tune supported logging levels and destinations while retaining important events.

Explanation

Correct Answer

D:

Severity and destination selection reduce noise without removing necessary fault evidence. For Ridge-2, confirm the actual outcome: critical events remain visible while routine noise is reduced.

Incorrect Answers

A:

“Drop BGP adjacencies to reduce syslog volume” targets a different operation from the reported requirement: “the monitoring platform is flooded with low-priority diagnostic records”. Severity and destination selection reduce noise without removing necessary fault evidence. Use the appropriate method: Tune supported logging levels and destinations while retaining important events.

B:

“Change tenant VRFs to control severity thresholds” targets a different operation from the reported requirement: “the monitoring platform is flooded with low-priority diagnostic records”. Severity and destination selection reduce noise without removing necessary fault evidence. Use the appropriate method: Tune supported logging levels and destinations while retaining important events.

C:

“Disable all logging including faults and security events” targets a different operation from the reported requirement: “the monitoring platform is flooded with low-priority diagnostic records”. Severity and destination selection reduce noise without removing necessary fault evidence. Use the appropriate method: Tune supported logging levels and destinations while retaining important events.

Question 221

In the fictional Canyon-5 east pod, a fabric operations audit prior to tenant onboarding, the team reports that two different EVPN sources can advertise otherwise identical service prefixes. Which engineering action best satisfies this request?

  1. Assign appropriate route distinguishers so VPN routes have distinct identities.
  2. Use a route target as the only globally unique origin identifier.
  3. Remove all identifiers to force unique route origin tracking.
  4. Use an interface ACL sequence number as a VPN route key.

Explanation

Correct Answer

A:

A route distinguisher contributes VPN route uniqueness and is separate from import policy. The option uses “Assign appropriate route distinguishers so VPN routes have distinct identities” to address “two different EVPN sources can advertise otherwise identical service prefixes”. The result must be observed on the affected component. Before onboarding, test that the intended fabric state exists.

Incorrect Answers

B:

“Use a route target as the only globally unique origin identifier” targets a different operation from the reported requirement: “two different EVPN sources can advertise otherwise identical service prefixes”. A route distinguisher contributes VPN route uniqueness and is separate from import policy. Use the appropriate method: Assign appropriate route distinguishers so VPN routes have distinct identities. Before onboarding, test that the intended fabric state exists.

C:

“Remove all identifiers to force unique route origin tracking” targets a different operation from the reported requirement: “two different EVPN sources can advertise otherwise identical service prefixes”. A route distinguisher contributes VPN route uniqueness and is separate from import policy. Use the appropriate method: Assign appropriate route distinguishers so VPN routes have distinct identities. Before onboarding, test that the intended fabric state exists.

D:

“Use an interface ACL sequence number as a VPN route key” targets a different operation from the reported requirement: “two different EVPN sources can advertise otherwise identical service prefixes”. A route distinguisher contributes VPN route uniqueness and is separate from import policy. Use the appropriate method: Assign appropriate route distinguishers so VPN routes have distinct identities. Before onboarding, test that the intended fabric state exists.

Question 222

In the fictional Atlas-7 west pod, a service recovery task following a partial path outage, the team reports that an operator needs live interface operational data rather than only intended settings. An unrelated configuration change is being considered. Which focused remediation best addresses the described problem first?

  1. Replace the interface with a loopback to create an up indicator.
  2. Inspect the operational state datastore or state-oriented CLI view.
  3. Read only the saved configuration and assume it proves link status.
  4. Check only user role names to determine physical link health.

Explanation

Correct Answer

B:

Operational state exposes what the system reports now rather than merely requested configuration. For Atlas-7, confirm the actual outcome: the relevant state paths show current link and counter values.

Incorrect Answers

A:

“Replace the interface with a loopback to create an up indicator” targets a different operation from the reported requirement: “an operator needs live interface operational data rather than only intended settings”. Operational state exposes what the system reports now rather than merely requested configuration. Use the appropriate method: Inspect the operational state datastore or state-oriented CLI view. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

C:

“Read only the saved configuration and assume it proves link status” targets a different operation from the reported requirement: “an operator needs live interface operational data rather than only intended settings”. Operational state exposes what the system reports now rather than merely requested configuration. Use the appropriate method: Inspect the operational state datastore or state-oriented CLI view. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

D:

“Check only user role names to determine physical link health” targets a different operation from the reported requirement: “an operator needs live interface operational data rather than only intended settings”. Operational state exposes what the system reports now rather than merely requested configuration. Use the appropriate method: Inspect the operational state datastore or state-oriented CLI view. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

Question 223

In the fictional Ridge-2 west pod, a secondary data hall with tenant isolation requirements, the team reports that unexpected packets target the switch control plane and risk exhausting CPU. An unrelated configuration change is being considered. Which focused remediation best addresses the described problem first?

  1. Increase the EVPN VNI count as a CPU defense.
  2. Bridge the control packets into every tenant MAC-VRF.
  3. Use the CPM filter and appropriate control-plane policers.
  4. Change CLI output table formatting to rate-limit packets.

Explanation

Correct Answer

C:

Control-plane filters and policers protect protocol and management processing capacity. For Ridge-2, confirm the actual outcome: legitimate control traffic passes within policy while unwanted rates are constrained.

Incorrect Answers

A:

“Increase the EVPN VNI count as a CPU defense” targets a different operation from the reported requirement: “unexpected packets target the switch control plane and risk exhausting CPU”. Control-plane filters and policers protect protocol and management processing capacity. Use the appropriate method: Use the CPM filter and appropriate control-plane policers.

B:

“Bridge the control packets into every tenant MAC-VRF” targets a different operation from the reported requirement: “unexpected packets target the switch control plane and risk exhausting CPU”. Control-plane filters and policers protect protocol and management processing capacity. Use the appropriate method: Use the CPM filter and appropriate control-plane policers.

D:

“Change CLI output table formatting to rate-limit packets” targets a different operation from the reported requirement: “unexpected packets target the switch control plane and risk exhausting CPU”. Control-plane filters and policers protect protocol and management processing capacity. Use the appropriate method: Use the CPM filter and appropriate control-plane policers.

Question 224

In the fictional Canyon-5 east pod, a fabric operations audit prior to tenant onboarding, the team reports that a large route display contains noise and a specific match must be isolated. Which engineering action best satisfies this request?

  1. Edit a syslog file and assume the route table is filtered.
  2. Remove the routing protocol configuration to reduce output.
  3. Block the route through an ACL to make it disappear.
  4. Apply supported CLI filtering to narrow the displayed results.

Explanation

Correct Answer

D:

Output filtering changes the view without changing routing behavior. The option uses “Apply supported CLI filtering to narrow the displayed results” to address “a large route display contains noise and a specific match must be isolated”. The result must be observed on the affected component. Before onboarding, test that the intended fabric state exists.

Incorrect Answers

A:

“Edit a syslog file and assume the route table is filtered” targets a different operation from the reported requirement: “a large route display contains noise and a specific match must be isolated”. Output filtering changes the view without changing routing behavior. Use the appropriate method: Apply supported CLI filtering to narrow the displayed results. Before onboarding, test that the intended fabric state exists.

B:

“Remove the routing protocol configuration to reduce output” targets a different operation from the reported requirement: “a large route display contains noise and a specific match must be isolated”. Output filtering changes the view without changing routing behavior. Use the appropriate method: Apply supported CLI filtering to narrow the displayed results. Before onboarding, test that the intended fabric state exists.

C:

“Block the route through an ACL to make it disappear” targets a different operation from the reported requirement: “a large route display contains noise and a specific match must be isolated”. Output filtering changes the view without changing routing behavior. Use the appropriate method: Apply supported CLI filtering to narrow the displayed results. Before onboarding, test that the intended fabric state exists.

Question 225

In the fictional Harbor-1 west pod, a staged top-of-rack rollout with a bounded maintenance window, the team reports that newly powered switches should receive initial configuration with minimal manual access. A peer suggested: "Expect a device to discover complete configuration from EVPN route targets alone" That did not solve the constraint. What should be chosen instead?

  1. Provide the required ZTP discovery and bootstrap information through supported services.
  2. Assume DNS hostname changes automatically create the bootstrap configuration.
  3. Expect a device to discover complete configuration from EVPN route targets alone.
  4. Configure only a tenant MAC-VRF on a disconnected laptop.

Explanation

Correct Answer

A:

ZTP depends on reachable bootstrap infrastructure and device discovery behavior. For Harbor-1, confirm the actual outcome: the device discovers its bootstrap source and applies the intended initial configuration.

Incorrect Answers

B:

“Assume DNS hostname changes automatically create the bootstrap configuration” targets a different operation from the reported requirement: “newly powered switches should receive initial configuration with minimal manual access”. ZTP depends on reachable bootstrap infrastructure and device discovery behavior. Use the appropriate method: Provide the required ZTP discovery and bootstrap information through supported services.

C:

“Expect a device to discover complete configuration from EVPN route targets alone” targets a different operation from the reported requirement: “newly powered switches should receive initial configuration with minimal manual access”. ZTP depends on reachable bootstrap infrastructure and device discovery behavior. Use the appropriate method: Provide the required ZTP discovery and bootstrap information through supported services.

D:

“Configure only a tenant MAC-VRF on a disconnected laptop” targets a different operation from the reported requirement: “newly powered switches should receive initial configuration with minimal manual access”. ZTP depends on reachable bootstrap infrastructure and device discovery behavior. Use the appropriate method: Provide the required ZTP discovery and bootstrap information through supported services.

Question 226

In the fictional Atlas-7 east pod, a service recovery task following a partial path outage, the team reports that a management client needs a structured request-response configuration interface. The planned change is "Use the supported SR Linux JSON-RPC management interface." Which post-change observation best validates the intended technical behavior?

  1. Check only that the device hostname is listed in the inventory, without examining sr linux api access behavior.
  2. Verify that a correctly authorized JSON-RPC request returns the expected modeled response.
  3. Use an unrelated tenant dashboard as proof, without verifying the required sr linux api access condition.
  4. Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior.

Explanation

Correct Answer

B:

JSON-RPC offers a structured management access method instead of screen scraping. The option uses “Verify that a correctly authorized JSON-RPC request returns the expected modeled response” to address “a management client needs a structured request-response configuration interface”. The acceptance test is: a correctly authorized JSON-RPC request returns the expected modeled response. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

Incorrect Answers

A:

“Check only that the device hostname is listed in the inventory, without examining sr linux api access behavior” targets a different operation from the reported requirement: “a management client needs a structured request-response configuration interface”. JSON-RPC offers a structured management access method instead of screen scraping. The confirming result is: a correctly authorized JSON-RPC request returns the expected modeled response. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

C:

“Use an unrelated tenant dashboard as proof, without verifying the required sr linux api access condition” targets a different operation from the reported requirement: “a management client needs a structured request-response configuration interface”. JSON-RPC offers a structured management access method instead of screen scraping. The confirming result is: a correctly authorized JSON-RPC request returns the expected modeled response. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

D:

“Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior” targets a different operation from the reported requirement: “a management client needs a structured request-response configuration interface”. JSON-RPC offers a structured management access method instead of screen scraping. The confirming result is: a correctly authorized JSON-RPC request returns the expected modeled response. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

Question 227

In the fictional Pine-9 west pod, a replacement leaf with configuration review requirements, the team reports that a remote gNMI management client must authenticate a device securely. An unrelated configuration change is being considered. Which focused remediation best addresses the described problem first?

  1. Disable certificate checking to make all connections succeed.
  2. Use a VXLAN VNI instead of transport authentication.
  3. Configure and use the appropriate TLS server profile for supported gNMI access.
  4. Rely only on plain-text password strings embedded in logs.

Explanation

Correct Answer

C:

TLS profiles provide cryptographic transport properties for supported management endpoints. For Pine-9, confirm the actual outcome: the intended client completes an authenticated TLS session and reads allowed paths.

Incorrect Answers

A:

“Disable certificate checking to make all connections succeed” targets a different operation from the reported requirement: “a remote gNMI management client must authenticate a device securely”. TLS profiles provide cryptographic transport properties for supported management endpoints. Use the appropriate method: Configure and use the appropriate TLS server profile for supported gNMI access. Confirm that the replacement leaf reaches the expected operational state.

B:

“Use a VXLAN VNI instead of transport authentication” targets a different operation from the reported requirement: “a remote gNMI management client must authenticate a device securely”. TLS profiles provide cryptographic transport properties for supported management endpoints. Use the appropriate method: Configure and use the appropriate TLS server profile for supported gNMI access. Confirm that the replacement leaf reaches the expected operational state.

D:

“Rely only on plain-text password strings embedded in logs” targets a different operation from the reported requirement: “a remote gNMI management client must authenticate a device securely”. TLS profiles provide cryptographic transport properties for supported management endpoints. Use the appropriate method: Configure and use the appropriate TLS server profile for supported gNMI access. Confirm that the replacement leaf reaches the expected operational state.

Question 228

In the fictional Harbor-1 east pod, a staged top-of-rack rollout with a bounded maintenance window, the team reports that the overlay needs to advertise IP routing reachability beyond individual MAC entries. The shift handoff must specify a defensible solution and the observable service outcome. Which recommendation is technically justified?

  1. Assign a MAC-VRF bridge flood-list in place of an L3 prefix advertisement.
  2. Treat an interface ACL entry as an EVPN IP route.
  3. Use only Type 3 membership routes to represent all routed prefixes.
  4. Use appropriate EVPN Type 5 IP prefix advertisements.

Explanation

Correct Answer

D:

IP prefix routes advertise Layer 3 destination reachability within EVPN. For Harbor-1, confirm the actual outcome: the intended tenant prefix is imported into the right IP-VRF.

Incorrect Answers

A:

“Assign a MAC-VRF bridge flood-list in place of an L3 prefix advertisement” targets a different operation from the reported requirement: “the overlay needs to advertise IP routing reachability beyond individual MAC entries”. IP prefix routes advertise Layer 3 destination reachability within EVPN. Use the appropriate method: Use appropriate EVPN Type 5 IP prefix advertisements.

B:

“Treat an interface ACL entry as an EVPN IP route” targets a different operation from the reported requirement: “the overlay needs to advertise IP routing reachability beyond individual MAC entries”. IP prefix routes advertise Layer 3 destination reachability within EVPN. Use the appropriate method: Use appropriate EVPN Type 5 IP prefix advertisements.

C:

“Use only Type 3 membership routes to represent all routed prefixes” targets a different operation from the reported requirement: “the overlay needs to advertise IP routing reachability beyond individual MAC entries”. IP prefix routes advertise Layer 3 destination reachability within EVPN. Use the appropriate method: Use appropriate EVPN Type 5 IP prefix advertisements.

Question 229

In the fictional Metro-8 west pod, a multi-tenant fabric undergoing documented validation, the team reports that two engineers are comparing configured state with a pending change. The planned change is "Compare the running and candidate views rather than treating them as identical." Which post-change observation best validates the intended technical behavior?

  1. Verify that the candidate diff identifies intended changes not yet reflected in running.
  2. Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior.
  3. Check only that the device hostname is listed in the inventory, without examining running versus candidate behavior.
  4. Use an unrelated tenant dashboard as proof, without verifying the required running versus candidate condition.

Explanation

Correct Answer

A:

Running and candidate configurations represent different phases of an edit transaction. The option uses “Verify that the candidate diff identifies intended changes not yet reflected in running” to address “two engineers are comparing configured state with a pending change”. The acceptance test is: the candidate diff identifies intended changes not yet reflected in running. Observe the relevant forwarding/control-plane behavior under the approved test.

Incorrect Answers

B:

“Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior” targets a different operation from the reported requirement: “two engineers are comparing configured state with a pending change”. Running and candidate configurations represent different phases of an edit transaction. The confirming result is: the candidate diff identifies intended changes not yet reflected in running. Observe the relevant forwarding/control-plane behavior under the approved test.

C:

“Check only that the device hostname is listed in the inventory, without examining running versus candidate behavior” targets a different operation from the reported requirement: “two engineers are comparing configured state with a pending change”. Running and candidate configurations represent different phases of an edit transaction. The confirming result is: the candidate diff identifies intended changes not yet reflected in running. Observe the relevant forwarding/control-plane behavior under the approved test.

D:

“Use an unrelated tenant dashboard as proof, without verifying the required running versus candidate condition” targets a different operation from the reported requirement: “two engineers are comparing configured state with a pending change”. Running and candidate configurations represent different phases of an edit transaction. The confirming result is: the candidate diff identifies intended changes not yet reflected in running. Observe the relevant forwarding/control-plane behavior under the approved test.

Question 230

In the fictional Summit-4 west pod, a change-freeze exception for a narrow operational fault, the team reports that a two-tier Clos fabric needs resilient leaf-to-spine paths. The planned change is "Connect every leaf to each spine in the same fabric." Which post-change observation best validates the intended technical behavior?

  1. Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior.
  2. Verify that each leaf has live routed adjacencies to the intended spines.
  3. Check only that the device hostname is listed in the inventory, without examining leaf-spine adjacency behavior.
  4. Use an unrelated tenant dashboard as proof, without verifying the required leaf-spine adjacency condition.

Explanation

Correct Answer

B:

Multiple spine paths avoid a single aggregation dependency and permit ECMP. The option uses “Verify that each leaf has live routed adjacencies to the intended spines” to address “a two-tier Clos fabric needs resilient leaf-to-spine paths”. The acceptance test is: each leaf has live routed adjacencies to the intended spines.

Incorrect Answers

A:

“Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior” targets a different operation from the reported requirement: “a two-tier Clos fabric needs resilient leaf-to-spine paths”. Multiple spine paths avoid a single aggregation dependency and permit ECMP. The confirming result is: each leaf has live routed adjacencies to the intended spines.

C:

“Check only that the device hostname is listed in the inventory, without examining leaf-spine adjacency behavior” targets a different operation from the reported requirement: “a two-tier Clos fabric needs resilient leaf-to-spine paths”. Multiple spine paths avoid a single aggregation dependency and permit ECMP. The confirming result is: each leaf has live routed adjacencies to the intended spines.

D:

“Use an unrelated tenant dashboard as proof, without verifying the required leaf-spine adjacency condition” targets a different operation from the reported requirement: “a two-tier Clos fabric needs resilient leaf-to-spine paths”. Multiple spine paths avoid a single aggregation dependency and permit ECMP. The confirming result is: each leaf has live routed adjacencies to the intended spines.

Nokia Data Center Fabric Fundamentals (4A0-D01) Practice Tests