mcAfee Secure Website
exam =5
exam =6

Exam Code: 4A0-D01

Exam Name: Nokia Data Center Fabric Fundamentals

Certification Provider: Nokia

Nokia 4A0-D01 Questions & Answers

Reliable & Actual Study Materials for 4A0-D01 Exam Success

61 Questions & Answers with Testing Engine

"4A0-D01: Nokia Data Center Fabric Fundamentals" Testing Engine covers all the knowledge points of the real Nokia 4A0-D01 exam.

The latest actual 4A0-D01 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at 4A0-D01 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Nokia Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Nokia 4A0-D01 Practice Test 24

Question 230

In the fictional Summit-4 west pod, a change-freeze exception for a narrow operational fault, the team reports that a two-tier Clos fabric needs resilient leaf-to-spine paths. The planned change is "Connect every leaf to each spine in the same fabric." Which post-change observation best validates the intended technical behavior?

  1. Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior.
  2. Verify that each leaf has live routed adjacencies to the intended spines.
  3. Check only that the device hostname is listed in the inventory, without examining leaf-spine adjacency behavior.
  4. Use an unrelated tenant dashboard as proof, without verifying the required leaf-spine adjacency condition.

Explanation

Correct Answer

B:

Multiple spine paths avoid a single aggregation dependency and permit ECMP. The option uses “Verify that each leaf has live routed adjacencies to the intended spines” to address “a two-tier Clos fabric needs resilient leaf-to-spine paths”. The acceptance test is: each leaf has live routed adjacencies to the intended spines.

Incorrect Answers

A:

“Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior” targets a different operation from the reported requirement: “a two-tier Clos fabric needs resilient leaf-to-spine paths”. Multiple spine paths avoid a single aggregation dependency and permit ECMP. The confirming result is: each leaf has live routed adjacencies to the intended spines.

C:

“Check only that the device hostname is listed in the inventory, without examining leaf-spine adjacency behavior” targets a different operation from the reported requirement: “a two-tier Clos fabric needs resilient leaf-to-spine paths”. Multiple spine paths avoid a single aggregation dependency and permit ECMP. The confirming result is: each leaf has live routed adjacencies to the intended spines.

D:

“Use an unrelated tenant dashboard as proof, without verifying the required leaf-spine adjacency condition” targets a different operation from the reported requirement: “a two-tier Clos fabric needs resilient leaf-to-spine paths”. Multiple spine paths avoid a single aggregation dependency and permit ECMP. The confirming result is: each leaf has live routed adjacencies to the intended spines.

Question 231

In the fictional Delta-6 west pod, a controller-managed extension requiring reproducible evidence, the team reports that a high-volume overlay segment has excessive ARP or ND flooding. A peer suggested: "Flood every host request across all tenants to increase visibility" That did not solve the constraint. What should be chosen instead?

  1. Disable MAC/IP advertisement for all active hosts.
  2. Use a BGP peer AS change to suppress host ARP requests.
  3. Evaluate supported EVPN endpoint information and proxy or suppression features.
  4. Flood every host request across all tenants to increase visibility.

Explanation

Correct Answer

C:

Distributed endpoint information may reduce unnecessary ARP/ND flooding when supported and configured. For Delta-6, confirm the actual outcome: known remote endpoint resolution succeeds with reduced unnecessary flood traffic.

Incorrect Answers

A:

“Disable MAC/IP advertisement for all active hosts” targets a different operation from the reported requirement: “a high-volume overlay segment has excessive ARP or ND flooding”. Distributed endpoint information may reduce unnecessary ARP/ND flooding when supported and configured. Use the appropriate method: Evaluate supported EVPN endpoint information and proxy or suppression features.

B:

“Use a BGP peer AS change to suppress host ARP requests” targets a different operation from the reported requirement: “a high-volume overlay segment has excessive ARP or ND flooding”. Distributed endpoint information may reduce unnecessary ARP/ND flooding when supported and configured. Use the appropriate method: Evaluate supported EVPN endpoint information and proxy or suppression features.

D:

“Flood every host request across all tenants to increase visibility” targets a different operation from the reported requirement: “a high-volume overlay segment has excessive ARP or ND flooding”. Distributed endpoint information may reduce unnecessary ARP/ND flooding when supported and configured. Use the appropriate method: Evaluate supported EVPN endpoint information and proxy or suppression features.

Question 232

In the fictional Atlas-7 east pod, a service recovery task following a partial path outage, the team reports that a two-tier Clos fabric needs resilient leaf-to-spine paths. The shift handoff must specify a defensible solution and the observable service outcome. Which recommendation is technically justified?

  1. Connect each leaf only to its nearest leaf.
  2. Use a single large Layer 2 ring as the sole interconnect.
  3. Place all east-west traffic through one gateway firewall.
  4. Connect every leaf to each spine in the same fabric.

Explanation

Correct Answer

D:

Multiple spine paths avoid a single aggregation dependency and permit ECMP. For Atlas-7, confirm the actual outcome: each leaf has live routed adjacencies to the intended spines.

Incorrect Answers

A:

“Connect each leaf only to its nearest leaf” targets a different operation from the reported requirement: “a two-tier Clos fabric needs resilient leaf-to-spine paths”. Multiple spine paths avoid a single aggregation dependency and permit ECMP. Use the appropriate method: Connect every leaf to each spine in the same fabric. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

B:

“Use a single large Layer 2 ring as the sole interconnect” targets a different operation from the reported requirement: “a two-tier Clos fabric needs resilient leaf-to-spine paths”. Multiple spine paths avoid a single aggregation dependency and permit ECMP. Use the appropriate method: Connect every leaf to each spine in the same fabric. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

C:

“Place all east-west traffic through one gateway firewall” targets a different operation from the reported requirement: “a two-tier Clos fabric needs resilient leaf-to-spine paths”. Multiple spine paths avoid a single aggregation dependency and permit ECMP. Use the appropriate method: Connect every leaf to each spine in the same fabric. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

Question 233

In the fictional Summit-4 west pod, a change-freeze exception for a narrow operational fault, the team reports that a manually configured destination prefix has no usable forwarding adjacency. A peer suggested: "Change the device hostname to match the prefix" That did not solve the constraint. What should be chosen instead?

  1. Reference an appropriate reachable next-hop group for the static route.
  2. Use a MAC move event as a static route next hop.
  3. Change the device hostname to match the prefix.
  4. Record the route only in syslog without installing it.

Explanation

Correct Answer

A:

A static route needs a viable forwarding disposition or next-hop resolution. For Summit-4, confirm the actual outcome: the static prefix is installed with a valid resolved forwarding next hop.

Incorrect Answers

B:

“Use a MAC move event as a static route next hop” targets a different operation from the reported requirement: “a manually configured destination prefix has no usable forwarding adjacency”. A static route needs a viable forwarding disposition or next-hop resolution. Use the appropriate method: Reference an appropriate reachable next-hop group for the static route.

C:

“Change the device hostname to match the prefix” targets a different operation from the reported requirement: “a manually configured destination prefix has no usable forwarding adjacency”. A static route needs a viable forwarding disposition or next-hop resolution. Use the appropriate method: Reference an appropriate reachable next-hop group for the static route.

D:

“Record the route only in syslog without installing it” targets a different operation from the reported requirement: “a manually configured destination prefix has no usable forwarding adjacency”. A static route needs a viable forwarding disposition or next-hop resolution. Use the appropriate method: Reference an appropriate reachable next-hop group for the static route.

Question 234

In the fictional Metro-8 east pod, a multi-tenant fabric undergoing documented validation, the team reports that multiple tenant subnets must communicate but unrelated tenants must remain isolated. The shift handoff must specify a defensible solution and the observable service outcome. Which recommendation is technically justified?

  1. Bridge all tenants into the same MAC-VRF to make routes unnecessary.
  2. Use tenant-specific IP-VRF routing with the intended L3 EVPN overlay service.
  3. Share a single unrestricted default route table among customers.
  4. Replace EVPN routing with logging-only policies.

Explanation

Correct Answer

B:

Tenant-specific L3 EVPN separates inter-subnet routing from cross-customer leakage. For Metro-8, confirm the actual outcome: routing works between authorized tenant subnets without unauthorized VRF crossing.

Incorrect Answers

A:

“Bridge all tenants into the same MAC-VRF to make routes unnecessary” targets a different operation from the reported requirement: “multiple tenant subnets must communicate but unrelated tenants must remain isolated”. Tenant-specific L3 EVPN separates inter-subnet routing from cross-customer leakage. Use the appropriate method: Use tenant-specific IP-VRF routing with the intended L3 EVPN overlay service. Observe the relevant forwarding/control-plane behavior under the approved test.

C:

“Share a single unrestricted default route table among customers” targets a different operation from the reported requirement: “multiple tenant subnets must communicate but unrelated tenants must remain isolated”. Tenant-specific L3 EVPN separates inter-subnet routing from cross-customer leakage. Use the appropriate method: Use tenant-specific IP-VRF routing with the intended L3 EVPN overlay service. Observe the relevant forwarding/control-plane behavior under the approved test.

D:

“Replace EVPN routing with logging-only policies” targets a different operation from the reported requirement: “multiple tenant subnets must communicate but unrelated tenants must remain isolated”. Tenant-specific L3 EVPN separates inter-subnet routing from cross-customer leakage. Use the appropriate method: Use tenant-specific IP-VRF routing with the intended L3 EVPN overlay service. Observe the relevant forwarding/control-plane behavior under the approved test.

Question 235

In the fictional Delta-6 east pod, a controller-managed extension requiring reproducible evidence, the team reports that several operators repeatedly use the same long diagnostic command. An unrelated configuration change is being considered. Which focused remediation best addresses the described problem first?

  1. Create a data-plane VXLAN tunnel for terminal convenience.
  2. Add a BGP community only to shorten the command text.
  3. Create an appropriate CLI alias for the recurring diagnostic command.
  4. Reboot the switch after every repeated command.

Explanation

Correct Answer

C:

Aliases improve CLI usability without altering network forwarding semantics. The option uses “Create an appropriate CLI alias for the recurring diagnostic command” to address “several operators repeatedly use the same long diagnostic command”. The result must be observed on the affected component.

Incorrect Answers

A:

“Create a data-plane VXLAN tunnel for terminal convenience” targets a different operation from the reported requirement: “several operators repeatedly use the same long diagnostic command”. Aliases improve CLI usability without altering network forwarding semantics. Use the appropriate method: Create an appropriate CLI alias for the recurring diagnostic command.

B:

“Add a BGP community only to shorten the command text” targets a different operation from the reported requirement: “several operators repeatedly use the same long diagnostic command”. Aliases improve CLI usability without altering network forwarding semantics. Use the appropriate method: Create an appropriate CLI alias for the recurring diagnostic command.

D:

“Reboot the switch after every repeated command” targets a different operation from the reported requirement: “several operators repeatedly use the same long diagnostic command”. Aliases improve CLI usability without altering network forwarding semantics. Use the appropriate method: Create an appropriate CLI alias for the recurring diagnostic command.

Question 236

In the fictional Pine-9 west pod, a replacement leaf with configuration review requirements, the team reports that routes from an external peer must be accepted or advertised selectively. An unrelated configuration change is being considered. Which focused remediation best addresses the described problem first?

  1. Use a VXLAN VNI as a prefix import rule.
  2. Use an interface ACL as the only BGP policy language.
  3. Change CLI output formatting to suppress unwanted advertisements.
  4. Apply an explicit BGP import or export policy for the intended prefixes.

Explanation

Correct Answer

D:

Route policies govern which routing information is accepted or advertised. For Pine-9, confirm the actual outcome: advertised and received routes match the intended prefix policy.

Incorrect Answers

A:

“Use a VXLAN VNI as a prefix import rule” targets a different operation from the reported requirement: “routes from an external peer must be accepted or advertised selectively”. Route policies govern which routing information is accepted or advertised. Use the appropriate method: Apply an explicit BGP import or export policy for the intended prefixes. Confirm that the replacement leaf reaches the expected operational state.

B:

“Use an interface ACL as the only BGP policy language” targets a different operation from the reported requirement: “routes from an external peer must be accepted or advertised selectively”. Route policies govern which routing information is accepted or advertised. Use the appropriate method: Apply an explicit BGP import or export policy for the intended prefixes. Confirm that the replacement leaf reaches the expected operational state.

C:

“Change CLI output formatting to suppress unwanted advertisements” targets a different operation from the reported requirement: “routes from an external peer must be accepted or advertised selectively”. Route policies govern which routing information is accepted or advertised. Use the appropriate method: Apply an explicit BGP import or export policy for the intended prefixes. Confirm that the replacement leaf reaches the expected operational state.

Question 237

In the fictional Harbor-1 east pod, a staged top-of-rack rollout with a bounded maintenance window, the team reports that a leaf port must carry separate tagged tenant attachment networks. The planned change is "Define matching VLAN-tagged subinterfaces with the correct encapsulation." Which post-change observation best validates the intended technical behavior?

  1. Verify that the expected tags and subinterfaces appear in the attachment configuration and traffic counters.
  2. Check only that the device hostname is listed in the inventory, without examining tagged subinterfaces behavior.
  3. Use an unrelated tenant dashboard as proof, without verifying the required tagged subinterfaces condition.
  4. Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior.

Explanation

Correct Answer

A:

Subinterfaces permit explicit per-tag service attachment on an interface. The option uses “Verify that the expected tags and subinterfaces appear in the attachment configuration and traffic counters” to address “a leaf port must carry separate tagged tenant attachment networks”. The acceptance test is: the expected tags and subinterfaces appear in the attachment configuration and traffic counters.

Incorrect Answers

B:

“Check only that the device hostname is listed in the inventory, without examining tagged subinterfaces behavior” targets a different operation from the reported requirement: “a leaf port must carry separate tagged tenant attachment networks”. Subinterfaces permit explicit per-tag service attachment on an interface. The confirming result is: the expected tags and subinterfaces appear in the attachment configuration and traffic counters.

C:

“Use an unrelated tenant dashboard as proof, without verifying the required tagged subinterfaces condition” targets a different operation from the reported requirement: “a leaf port must carry separate tagged tenant attachment networks”. Subinterfaces permit explicit per-tag service attachment on an interface. The confirming result is: the expected tags and subinterfaces appear in the attachment configuration and traffic counters.

D:

“Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior” targets a different operation from the reported requirement: “a leaf port must carry separate tagged tenant attachment networks”. Subinterfaces permit explicit per-tag service attachment on an interface. The confirming result is: the expected tags and subinterfaces appear in the attachment configuration and traffic counters.

Question 238

In the fictional Summit-4 east pod, a change-freeze exception for a narrow operational fault, the team reports that management access to the switch itself must be restricted. An unrelated configuration change is being considered. Which focused remediation best addresses the described problem first?

  1. Disable tenant EVPN routes to secure the management endpoint.
  2. Use the applicable system ACL or management-access policy for device-bound traffic.
  3. Use only a tenant interface ACL and assume it protects all device management.
  4. Change a VXLAN VNI as an SSH authentication filter.

Explanation

Correct Answer

B:

System-level access filtering concerns traffic destined to the device, not just transit services. The option uses “Use the applicable system ACL or management-access policy for device-bound traffic” to address “management access to the switch itself must be restricted”. The result must be observed on the affected component.

Incorrect Answers

A:

“Disable tenant EVPN routes to secure the management endpoint” targets a different operation from the reported requirement: “management access to the switch itself must be restricted”. System-level access filtering concerns traffic destined to the device, not just transit services. Use the appropriate method: Use the applicable system ACL or management-access policy for device-bound traffic.

C:

“Use only a tenant interface ACL and assume it protects all device management” targets a different operation from the reported requirement: “management access to the switch itself must be restricted”. System-level access filtering concerns traffic destined to the device, not just transit services. Use the appropriate method: Use the applicable system ACL or management-access policy for device-bound traffic.

D:

“Change a VXLAN VNI as an SSH authentication filter” targets a different operation from the reported requirement: “management access to the switch itself must be restricted”. System-level access filtering concerns traffic destined to the device, not just transit services. Use the appropriate method: Use the applicable system ACL or management-access policy for device-bound traffic.

Question 239

In the fictional North-10 west pod, a commissioning exercise under the on-call team, the team reports that an underlay path needs rapid failure signaling between configured peers. The planned change is "Configure and verify a supported BFD session for the relevant adjacency." Which post-change observation best validates the intended technical behavior?

  1. Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior.
  2. Check only that the device hostname is listed in the inventory, without examining bfd peer detection behavior.
  3. Verify that the BFD session is up and its failure state correlates with the intended adjacency.
  4. Use an unrelated tenant dashboard as proof, without verifying the required bfd peer detection condition.

Explanation

Correct Answer

C:

BFD supplies protocol-independent rapid path liveliness detection when correctly bound to peers. The option uses “Verify that the BFD session is up and its failure state correlates with the intended adjacency” to address “an underlay path needs rapid failure signaling between configured peers”. The acceptance test is: the BFD session is up and its failure state correlates with the intended adjacency. Before onboarding, test that the intended fabric state exists.

Incorrect Answers

A:

“Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior” targets a different operation from the reported requirement: “an underlay path needs rapid failure signaling between configured peers”. BFD supplies protocol-independent rapid path liveliness detection when correctly bound to peers. The confirming result is: the BFD session is up and its failure state correlates with the intended adjacency. Before onboarding, test that the intended fabric state exists.

B:

“Check only that the device hostname is listed in the inventory, without examining bfd peer detection behavior” targets a different operation from the reported requirement: “an underlay path needs rapid failure signaling between configured peers”. BFD supplies protocol-independent rapid path liveliness detection when correctly bound to peers. The confirming result is: the BFD session is up and its failure state correlates with the intended adjacency. Before onboarding, test that the intended fabric state exists.

D:

“Use an unrelated tenant dashboard as proof, without verifying the required bfd peer detection condition” targets a different operation from the reported requirement: “an underlay path needs rapid failure signaling between configured peers”. BFD supplies protocol-independent rapid path liveliness detection when correctly bound to peers. The confirming result is: the BFD session is up and its failure state correlates with the intended adjacency. Before onboarding, test that the intended fabric state exists.

Question 240

In the fictional Harbor-1 west pod, a staged top-of-rack rollout with a bounded maintenance window, the team reports that separate customers must not share unintended bridge or routing tables. The planned change is "Associate tenant segments with appropriate MAC-VRFs and IP-VRFs." Which post-change observation best validates the intended technical behavior?

  1. Check only that the device hostname is listed in the inventory, without examining tenant isolation behavior.
  2. Use an unrelated tenant dashboard as proof, without verifying the required tenant isolation condition.
  3. Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior.
  4. Verify that tenant routes and MACs occur only in the intended network instances.

Explanation

Correct Answer

D:

Distinct virtual routing and bridging instances provide explicit tenant forwarding boundaries. The option uses “Verify that tenant routes and MACs occur only in the intended network instances” to address “separate customers must not share unintended bridge or routing tables”. The acceptance test is: tenant routes and MACs occur only in the intended network instances.

Incorrect Answers

A:

“Check only that the device hostname is listed in the inventory, without examining tenant isolation behavior” targets a different operation from the reported requirement: “separate customers must not share unintended bridge or routing tables”. Distinct virtual routing and bridging instances provide explicit tenant forwarding boundaries. The confirming result is: tenant routes and MACs occur only in the intended network instances.

B:

“Use an unrelated tenant dashboard as proof, without verifying the required tenant isolation condition” targets a different operation from the reported requirement: “separate customers must not share unintended bridge or routing tables”. Distinct virtual routing and bridging instances provide explicit tenant forwarding boundaries. The confirming result is: tenant routes and MACs occur only in the intended network instances.

C:

“Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior” targets a different operation from the reported requirement: “separate customers must not share unintended bridge or routing tables”. Distinct virtual routing and bridging instances provide explicit tenant forwarding boundaries. The confirming result is: tenant routes and MACs occur only in the intended network instances.

Nokia Data Center Fabric Fundamentals (4A0-D01) Practice Tests