mcAfee Secure Website
exam =5
exam =6

Exam Code: 4A0-D01

Exam Name: Nokia Data Center Fabric Fundamentals

Certification Provider: Nokia

Nokia 4A0-D01 Questions & Answers

Reliable & Actual Study Materials for 4A0-D01 Exam Success

61 Questions & Answers with Testing Engine

"4A0-D01: Nokia Data Center Fabric Fundamentals" Testing Engine covers all the knowledge points of the real Nokia 4A0-D01 exam.

The latest actual 4A0-D01 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at 4A0-D01 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Nokia Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Nokia 4A0-D01 Practice Test 21

Question 200

In the fictional Metro-8 west pod, a multi-tenant fabric undergoing documented validation, the team reports that a link carries packets but the application sees intermittent errors. The shift handoff must specify a defensible solution and the observable service outcome. Which recommendation is technically justified?

  1. Assume a green GUI icon proves no packet impairment.
  2. Change the route distinguisher to reset physical CRC errors.
  3. Check only the switch hostname to judge packet loss.
  4. Inspect error, discard and packet counters for that interface.

Explanation

Correct Answer

D:

Counters help distinguish physical or forwarding problems from configuration guesses. For Metro-8, confirm the actual outcome: error and discard trends align with measured traffic and reported symptoms.

Incorrect Answers

A:

“Assume a green GUI icon proves no packet impairment” targets a different operation from the reported requirement: “a link carries packets but the application sees intermittent errors”. Counters help distinguish physical or forwarding problems from configuration guesses. Use the appropriate method: Inspect error, discard and packet counters for that interface. Observe the relevant forwarding/control-plane behavior under the approved test.

B:

“Change the route distinguisher to reset physical CRC errors” targets a different operation from the reported requirement: “a link carries packets but the application sees intermittent errors”. Counters help distinguish physical or forwarding problems from configuration guesses. Use the appropriate method: Inspect error, discard and packet counters for that interface. Observe the relevant forwarding/control-plane behavior under the approved test.

C:

“Check only the switch hostname to judge packet loss” targets a different operation from the reported requirement: “a link carries packets but the application sees intermittent errors”. Counters help distinguish physical or forwarding problems from configuration guesses. Use the appropriate method: Inspect error, discard and packet counters for that interface. Observe the relevant forwarding/control-plane behavior under the approved test.

Question 201

In the fictional Harbor-1 west pod, a staged top-of-rack rollout with a bounded maintenance window, the team reports that IPv6 traffic fails while IPv4 routes to the same leaf are healthy. A peer suggested: "Assume healthy IPv4 forwarding proves IPv6 route installation" That did not solve the constraint. What should be chosen instead?

  1. Inspect the IPv6 address-family routes and next-hop resolution separately.
  2. Change an IPv4-only ACL and declare IPv6 restored.
  3. Move the entire tenant into a Layer 2 hub.
  4. Assume healthy IPv4 forwarding proves IPv6 route installation.

Explanation

Correct Answer

A:

The two IP address families have distinct routes and reachability requirements. For Harbor-1, confirm the actual outcome: the IPv6 destination and next hop are installed in the intended route table.

Incorrect Answers

B:

“Change an IPv4-only ACL and declare IPv6 restored” targets a different operation from the reported requirement: “IPv6 traffic fails while IPv4 routes to the same leaf are healthy”. The two IP address families have distinct routes and reachability requirements. Use the appropriate method: Inspect the IPv6 address-family routes and next-hop resolution separately.

C:

“Move the entire tenant into a Layer 2 hub” targets a different operation from the reported requirement: “IPv6 traffic fails while IPv4 routes to the same leaf are healthy”. The two IP address families have distinct routes and reachability requirements. Use the appropriate method: Inspect the IPv6 address-family routes and next-hop resolution separately.

D:

“Assume healthy IPv4 forwarding proves IPv6 route installation” targets a different operation from the reported requirement: “IPv6 traffic fails while IPv4 routes to the same leaf are healthy”. The two IP address families have distinct routes and reachability requirements. Use the appropriate method: Inspect the IPv6 address-family routes and next-hop resolution separately.

Question 202

In the fictional Ridge-2 west pod, a secondary data hall with tenant isolation requirements, the team reports that operations need machine-readable configuration and operational state. A peer suggested: "Treat free-form screen text as the sole authoritative schema" That did not solve the constraint. What should be chosen instead?

  1. Infer device state only from an external spreadsheet.
  2. Use SR Linux model-driven YANG configuration and state models.
  3. Store all device configuration in manually maintained CLI screenshots.
  4. Treat free-form screen text as the sole authoritative schema.

Explanation

Correct Answer

B:

YANG describes a structured data model that management clients can interpret. For Ridge-2, confirm the actual outcome: retrieved modeled configuration and state reflect the target object accurately.

Incorrect Answers

A:

“Infer device state only from an external spreadsheet” targets a different operation from the reported requirement: “operations need machine-readable configuration and operational state”. YANG describes a structured data model that management clients can interpret. Use the appropriate method: Use SR Linux model-driven YANG configuration and state models.

C:

“Store all device configuration in manually maintained CLI screenshots” targets a different operation from the reported requirement: “operations need machine-readable configuration and operational state”. YANG describes a structured data model that management clients can interpret. Use the appropriate method: Use SR Linux model-driven YANG configuration and state models.

D:

“Treat free-form screen text as the sole authoritative schema” targets a different operation from the reported requirement: “operations need machine-readable configuration and operational state”. YANG describes a structured data model that management clients can interpret. Use the appropriate method: Use SR Linux model-driven YANG configuration and state models.

Question 203

In the fictional Pine-9 west pod, a replacement leaf with configuration review requirements, the team reports that a risky change requires a reliable return point. A peer suggested: "Delete all prior configuration history before testing" That did not solve the constraint. What should be chosen instead?

  1. Change random route preferences to force recovery.
  2. Delete all prior configuration history before testing.
  3. Take and retain a configuration checkpoint before applying the change.
  4. Rely on a single CLI screenshot as an automatic rollback.

Explanation

Correct Answer

C:

A checkpoint provides an explicit configuration reference for controlled rollback. For Pine-9, confirm the actual outcome: the recorded checkpoint is available and maps to the intended prechange state.

Incorrect Answers

A:

“Change random route preferences to force recovery” targets a different operation from the reported requirement: “a risky change requires a reliable return point”. A checkpoint provides an explicit configuration reference for controlled rollback. Use the appropriate method: Take and retain a configuration checkpoint before applying the change. Confirm that the replacement leaf reaches the expected operational state.

B:

“Delete all prior configuration history before testing” targets a different operation from the reported requirement: “a risky change requires a reliable return point”. A checkpoint provides an explicit configuration reference for controlled rollback. Use the appropriate method: Take and retain a configuration checkpoint before applying the change. Confirm that the replacement leaf reaches the expected operational state.

D:

“Rely on a single CLI screenshot as an automatic rollback” targets a different operation from the reported requirement: “a risky change requires a reliable return point”. A checkpoint provides an explicit configuration reference for controlled rollback. Use the appropriate method: Take and retain a configuration checkpoint before applying the change. Confirm that the replacement leaf reaches the expected operational state.

Question 204

In the fictional North-10 east pod, a commissioning exercise under the on-call team, the team reports that an expanding data hall requires extra fabric path capacity without redesigning every leaf. The planned change is "Add compatible spine capacity and attach the fabric leaves to it." Which post-change observation best validates the intended technical behavior?

  1. Check only that the device hostname is listed in the inventory, without examining clos horizontal growth behavior.
  2. Use an unrelated tenant dashboard as proof, without verifying the required clos horizontal growth condition.
  3. Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior.
  4. Verify that new spine adjacencies and expected routes become operational on participating leaves.

Explanation

Correct Answer

D:

Adding spine capacity is a normal way to increase leaf-spine fabric path diversity. The option uses “Verify that new spine adjacencies and expected routes become operational on participating leaves” to address “an expanding data hall requires extra fabric path capacity without redesigning every leaf”. The acceptance test is: new spine adjacencies and expected routes become operational on participating leaves. Before onboarding, test that the intended fabric state exists.

Incorrect Answers

A:

“Check only that the device hostname is listed in the inventory, without examining clos horizontal growth behavior” targets a different operation from the reported requirement: “an expanding data hall requires extra fabric path capacity without redesigning every leaf”. Adding spine capacity is a normal way to increase leaf-spine fabric path diversity. The confirming result is: new spine adjacencies and expected routes become operational on participating leaves. Before onboarding, test that the intended fabric state exists.

B:

“Use an unrelated tenant dashboard as proof, without verifying the required clos horizontal growth condition” targets a different operation from the reported requirement: “an expanding data hall requires extra fabric path capacity without redesigning every leaf”. Adding spine capacity is a normal way to increase leaf-spine fabric path diversity. The confirming result is: new spine adjacencies and expected routes become operational on participating leaves. Before onboarding, test that the intended fabric state exists.

C:

“Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior” targets a different operation from the reported requirement: “an expanding data hall requires extra fabric path capacity without redesigning every leaf”. Adding spine capacity is a normal way to increase leaf-spine fabric path diversity. The confirming result is: new spine adjacencies and expected routes become operational on participating leaves. Before onboarding, test that the intended fabric state exists.

Question 205

In the fictional Pine-9 east pod, a replacement leaf with configuration review requirements, the team reports that a route appears in logs but cannot be found in the active forwarding table. The planned change is "Compare logs with current protocol and forwarding state." Which post-change observation best validates the intended technical behavior?

  1. Verify that current routing and FIB observations agree with the incident interpretation.
  2. Use an unrelated tenant dashboard as proof, without verifying the required log versus forwarding evidence condition.
  3. Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior.
  4. Check only that the device hostname is listed in the inventory, without examining log versus forwarding evidence behavior.

Explanation

Correct Answer

A:

Historical events alone do not establish currently installed forwarding state. The option uses “Verify that current routing and FIB observations agree with the incident interpretation” to address “a route appears in logs but cannot be found in the active forwarding table”. The acceptance test is: current routing and FIB observations agree with the incident interpretation. Confirm that the replacement leaf reaches the expected operational state.

Incorrect Answers

B:

“Use an unrelated tenant dashboard as proof, without verifying the required log versus forwarding evidence condition” targets a different operation from the reported requirement: “a route appears in logs but cannot be found in the active forwarding table”. Historical events alone do not establish currently installed forwarding state. The confirming result is: current routing and FIB observations agree with the incident interpretation. Confirm that the replacement leaf reaches the expected operational state.

C:

“Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior” targets a different operation from the reported requirement: “a route appears in logs but cannot be found in the active forwarding table”. Historical events alone do not establish currently installed forwarding state. The confirming result is: current routing and FIB observations agree with the incident interpretation. Confirm that the replacement leaf reaches the expected operational state.

D:

“Check only that the device hostname is listed in the inventory, without examining log versus forwarding evidence behavior” targets a different operation from the reported requirement: “a route appears in logs but cannot be found in the active forwarding table”. Historical events alone do not establish currently installed forwarding state. The confirming result is: current routing and FIB observations agree with the incident interpretation. Confirm that the replacement leaf reaches the expected operational state.

Question 206

In the fictional Delta-6 east pod, a controller-managed extension requiring reproducible evidence, the team reports that the intended fabric topology differs from deployed configuration on several nodes. The planned change is "Use EDA fabric-intent workflows to reconcile desired fabric configuration." Which post-change observation best validates the intended technical behavior?

  1. Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior.
  2. Verify that deployed fabric resources converge toward the declared and validated intent.
  3. Use an unrelated tenant dashboard as proof, without verifying the required fabric intent automation condition.
  4. Check only that the device hostname is listed in the inventory, without examining fabric intent automation behavior.

Explanation

Correct Answer

B:

Intent-based automation represents desired outcomes and coordinates enforcement. The option uses “Verify that deployed fabric resources converge toward the declared and validated intent” to address “the intended fabric topology differs from deployed configuration on several nodes”. The acceptance test is: deployed fabric resources converge toward the declared and validated intent.

Incorrect Answers

A:

“Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior” targets a different operation from the reported requirement: “the intended fabric topology differs from deployed configuration on several nodes”. Intent-based automation represents desired outcomes and coordinates enforcement. The confirming result is: deployed fabric resources converge toward the declared and validated intent.

C:

“Use an unrelated tenant dashboard as proof, without verifying the required fabric intent automation condition” targets a different operation from the reported requirement: “the intended fabric topology differs from deployed configuration on several nodes”. Intent-based automation represents desired outcomes and coordinates enforcement. The confirming result is: deployed fabric resources converge toward the declared and validated intent.

D:

“Check only that the device hostname is listed in the inventory, without examining fabric intent automation behavior” targets a different operation from the reported requirement: “the intended fabric topology differs from deployed configuration on several nodes”. Intent-based automation represents desired outcomes and coordinates enforcement. The confirming result is: deployed fabric resources converge toward the declared and validated intent.

Question 207

In the fictional Orchard-3 west pod, a lab-to-production migration after a successful canary, the team reports that an automation system needs structured streaming device state. Which engineering action best satisfies this request?

  1. Encode syslog output as a replacement for interface state models.
  2. Infer device counters from route-target strings.
  3. Use a supported gNMI subscription or retrieval interface.
  4. Run a human terminal screenshot macro as the only telemetry feed.

Explanation

Correct Answer

C:

GNMI provides a model-driven management path for configuration and telemetry. Check: the subscribed or retrieved state path returns the intended operational values.

Incorrect Answers

A:

“Encode syslog output as a replacement for interface state models” targets a different operation from the reported requirement: “an automation system needs structured streaming device state”. GNMI provides a model-driven management path for configuration and telemetry. The confirming result is: the subscribed or retrieved state path returns the intended operational values. For the staged migration, validate the affected path before expansion.

B:

“Infer device counters from route-target strings” targets a different operation from the reported requirement: “an automation system needs structured streaming device state”. GNMI provides a model-driven management path for configuration and telemetry. The confirming result is: the subscribed or retrieved state path returns the intended operational values. For the staged migration, validate the affected path before expansion.

D:

“Run a human terminal screenshot macro as the only telemetry feed” targets a different operation from the reported requirement: “an automation system needs structured streaming device state”. GNMI provides a model-driven management path for configuration and telemetry. The confirming result is: the subscribed or retrieved state path returns the intended operational values. For the staged migration, validate the affected path before expansion.

Question 208

In the fictional Orchard-3 west pod, a lab-to-production migration after a successful canary, the team reports that traffic uses a tenant VRF but only the default route table was examined. The planned change is "Inspect the forwarding and routing tables inside the actual tenant IP-VRF." Which post-change observation best validates the intended technical behavior?

  1. Check only that the device hostname is listed in the inventory, without examining network-instance route lookup behavior.
  2. Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior.
  3. Use an unrelated tenant dashboard as proof, without verifying the required network-instance route lookup condition.
  4. Verify that the destination is resolved in the intended tenant IP-VRF.

Explanation

Correct Answer

D:

VRF-specific forwarding decisions require examining the correct routing instance. The option uses “Verify that the destination is resolved in the intended tenant IP-VRF” to address “traffic uses a tenant VRF but only the default route table was examined”. The acceptance test is: the destination is resolved in the intended tenant IP-VRF. For the staged migration, validate the affected path before expansion.

Incorrect Answers

A:

“Check only that the device hostname is listed in the inventory, without examining network-instance route lookup behavior” targets a different operation from the reported requirement: “traffic uses a tenant VRF but only the default route table was examined”. VRF-specific forwarding decisions require examining the correct routing instance. The confirming result is: the destination is resolved in the intended tenant IP-VRF. For the staged migration, validate the affected path before expansion.

B:

“Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior” targets a different operation from the reported requirement: “traffic uses a tenant VRF but only the default route table was examined”. VRF-specific forwarding decisions require examining the correct routing instance. The confirming result is: the destination is resolved in the intended tenant IP-VRF. For the staged migration, validate the affected path before expansion.

C:

“Use an unrelated tenant dashboard as proof, without verifying the required network-instance route lookup condition” targets a different operation from the reported requirement: “traffic uses a tenant VRF but only the default route table was examined”. VRF-specific forwarding decisions require examining the correct routing instance. The confirming result is: the destination is resolved in the intended tenant IP-VRF. For the staged migration, validate the affected path before expansion.

Question 209

In the fictional Canyon-5 west pod, a fabric operations audit prior to tenant onboarding, the team reports that the fabric must limit large shared Layer 2 failure domains. A peer suggested: "Stretch one unbroken VLAN over every underlay link" That did not solve the constraint. What should be chosen instead?

  1. Use Layer 3 routed links between leaf and spine switches.
  2. Stretch one unbroken VLAN over every underlay link.
  3. Rely on an overlay tunnel without any IP routing underneath.
  4. Build the fabric from a single shared collision domain.

Explanation

Correct Answer

A:

A routed underlay confines broadcast domains and supplies IP reachability for the overlay. For Canyon-5, confirm the actual outcome: routed underlay next hops reach all required VTEPs.

Incorrect Answers

B:

“Stretch one unbroken VLAN over every underlay link” targets a different operation from the reported requirement: “the fabric must limit large shared Layer 2 failure domains”. A routed underlay confines broadcast domains and supplies IP reachability for the overlay. Use the appropriate method: Use Layer 3 routed links between leaf and spine switches. Before onboarding, test that the intended fabric state exists.

C:

“Rely on an overlay tunnel without any IP routing underneath” targets a different operation from the reported requirement: “the fabric must limit large shared Layer 2 failure domains”. A routed underlay confines broadcast domains and supplies IP reachability for the overlay. Use the appropriate method: Use Layer 3 routed links between leaf and spine switches. Before onboarding, test that the intended fabric state exists.

D:

“Build the fabric from a single shared collision domain” targets a different operation from the reported requirement: “the fabric must limit large shared Layer 2 failure domains”. A routed underlay confines broadcast domains and supplies IP reachability for the overlay. Use the appropriate method: Use Layer 3 routed links between leaf and spine switches. Before onboarding, test that the intended fabric state exists.

Question 210

In the fictional Ridge-2 west pod, a secondary data hall with tenant isolation requirements, the team reports that a VXLAN endpoint sourced from a loopback address is unreachable. Which engineering action best satisfies this request?

  1. Advertise only a tenant MAC and ignore underlay reachability.
  2. Ensure the loopback endpoint address is advertised and routed in the underlay.
  3. Use a log severity filter as the reachability repair.
  4. Rename the loopback without updating any IP routes.

Explanation

Correct Answer

B:

Loopback-based tunnel endpoints require routed transport reachability. For Ridge-2, confirm the actual outcome: the remote endpoint loopback resolves through valid underlay routes.

Incorrect Answers

A:

“Advertise only a tenant MAC and ignore underlay reachability” targets a different operation from the reported requirement: “a VXLAN endpoint sourced from a loopback address is unreachable”. Loopback-based tunnel endpoints require routed transport reachability. Use the appropriate method: Ensure the loopback endpoint address is advertised and routed in the underlay.

C:

“Use a log severity filter as the reachability repair” targets a different operation from the reported requirement: “a VXLAN endpoint sourced from a loopback address is unreachable”. Loopback-based tunnel endpoints require routed transport reachability. Use the appropriate method: Ensure the loopback endpoint address is advertised and routed in the underlay.

D:

“Rename the loopback without updating any IP routes” targets a different operation from the reported requirement: “a VXLAN endpoint sourced from a loopback address is unreachable”. Loopback-based tunnel endpoints require routed transport reachability. Use the appropriate method: Ensure the loopback endpoint address is advertised and routed in the underlay.

Nokia Data Center Fabric Fundamentals (4A0-D01) Practice Tests