mcAfee Secure Website
exam =5
exam =6

Exam Code: 4A0-D01

Exam Name: Nokia Data Center Fabric Fundamentals

Certification Provider: Nokia

Nokia 4A0-D01 Questions & Answers

Reliable & Actual Study Materials for 4A0-D01 Exam Success

61 Questions & Answers with Testing Engine

"4A0-D01: Nokia Data Center Fabric Fundamentals" Testing Engine covers all the knowledge points of the real Nokia 4A0-D01 exam.

The latest actual 4A0-D01 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at 4A0-D01 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Nokia Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Nokia 4A0-D01 Practice Test 25

Question 240

In the fictional Harbor-1 west pod, a staged top-of-rack rollout with a bounded maintenance window, the team reports that separate customers must not share unintended bridge or routing tables. The planned change is "Associate tenant segments with appropriate MAC-VRFs and IP-VRFs." Which post-change observation best validates the intended technical behavior?

  1. Check only that the device hostname is listed in the inventory, without examining tenant isolation behavior.
  2. Use an unrelated tenant dashboard as proof, without verifying the required tenant isolation condition.
  3. Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior.
  4. Verify that tenant routes and MACs occur only in the intended network instances.

Explanation

Correct Answer

D:

Distinct virtual routing and bridging instances provide explicit tenant forwarding boundaries. The option uses “Verify that tenant routes and MACs occur only in the intended network instances” to address “separate customers must not share unintended bridge or routing tables”. The acceptance test is: tenant routes and MACs occur only in the intended network instances.

Incorrect Answers

A:

“Check only that the device hostname is listed in the inventory, without examining tenant isolation behavior” targets a different operation from the reported requirement: “separate customers must not share unintended bridge or routing tables”. Distinct virtual routing and bridging instances provide explicit tenant forwarding boundaries. The confirming result is: tenant routes and MACs occur only in the intended network instances.

B:

“Use an unrelated tenant dashboard as proof, without verifying the required tenant isolation condition” targets a different operation from the reported requirement: “separate customers must not share unintended bridge or routing tables”. Distinct virtual routing and bridging instances provide explicit tenant forwarding boundaries. The confirming result is: tenant routes and MACs occur only in the intended network instances.

C:

“Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior” targets a different operation from the reported requirement: “separate customers must not share unintended bridge or routing tables”. Distinct virtual routing and bridging instances provide explicit tenant forwarding boundaries. The confirming result is: tenant routes and MACs occur only in the intended network instances.

Question 241

In the fictional Summit-4 east pod, a change-freeze exception for a narrow operational fault, the team reports that an on-call engineer needs a compact human-readable comparison of many interfaces. A peer suggested: "Export full model trees when a focused overview is needed" That did not solve the constraint. What should be chosen instead?

  1. Use the CLI table presentation where supported.
  2. Force binary packet capture as the only display format.
  3. Disable interface statistics to shorten every command.
  4. Export full model trees when a focused overview is needed.

Explanation

Correct Answer

A:

Table presentation makes repeated fields easier to compare interactively. For Summit-4, confirm the actual outcome: the displayed table contains the intended interfaces and columns.

Incorrect Answers

B:

“Force binary packet capture as the only display format” targets a different operation from the reported requirement: “an on-call engineer needs a compact human-readable comparison of many interfaces”. Table presentation makes repeated fields easier to compare interactively. Use the appropriate method: Use the CLI table presentation where supported.

C:

“Disable interface statistics to shorten every command” targets a different operation from the reported requirement: “an on-call engineer needs a compact human-readable comparison of many interfaces”. Table presentation makes repeated fields easier to compare interactively. Use the appropriate method: Use the CLI table presentation where supported.

D:

“Export full model trees when a focused overview is needed” targets a different operation from the reported requirement: “an on-call engineer needs a compact human-readable comparison of many interfaces”. Table presentation makes repeated fields easier to compare interactively. Use the appropriate method: Use the CLI table presentation where supported.

Question 242

In the fictional Canyon-5 west pod, a fabric operations audit prior to tenant onboarding, the team reports that several static routes must share a maintained forwarding next-hop selection. Which engineering action best satisfies this request?

  1. Repeat arbitrary interface aliases as route next hops.
  2. Define and reference an appropriate next-hop group.
  3. Put all static routes into the MAC address learning table.
  4. Use the EDA service intent name as an IP gateway.

Explanation

Correct Answer

B:

A next-hop group separates forwarding next-hop membership from destination-prefix entries. For Canyon-5, confirm the actual outcome: the intended static routes resolve through the maintained next-hop group.

Incorrect Answers

A:

“Repeat arbitrary interface aliases as route next hops” targets a different operation from the reported requirement: “several static routes must share a maintained forwarding next-hop selection”. A next-hop group separates forwarding next-hop membership from destination-prefix entries. Use the appropriate method: Define and reference an appropriate next-hop group. Before onboarding, test that the intended fabric state exists.

C:

“Put all static routes into the MAC address learning table” targets a different operation from the reported requirement: “several static routes must share a maintained forwarding next-hop selection”. A next-hop group separates forwarding next-hop membership from destination-prefix entries. Use the appropriate method: Define and reference an appropriate next-hop group. Before onboarding, test that the intended fabric state exists.

D:

“Use the EDA service intent name as an IP gateway” targets a different operation from the reported requirement: “several static routes must share a maintained forwarding next-hop selection”. A next-hop group separates forwarding next-hop membership from destination-prefix entries. Use the appropriate method: Define and reference an appropriate next-hop group. Before onboarding, test that the intended fabric state exists.

Question 243

In the fictional Orchard-3 west pod, a lab-to-production migration after a successful canary, the team reports that a control protocol is intermittently dropped after aggressive protection settings. The planned change is "Review CPM classification and policer rates against required control traffic." Which post-change observation best validates the intended technical behavior?

  1. Check only that the device hostname is listed in the inventory, without examining cpm policer tuning behavior.
  2. Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior.
  3. Verify that policer statistics and protocol session health match expected traffic rates.
  4. Use an unrelated tenant dashboard as proof, without verifying the required cpm policer tuning condition.

Explanation

Correct Answer

C:

Correctly scoped policing balances CPU protection with valid protocol liveliness. The option uses “Verify that policer statistics and protocol session health match expected traffic rates” to address “a control protocol is intermittently dropped after aggressive protection settings”. The acceptance test is: policer statistics and protocol session health match expected traffic rates. For the staged migration, validate the affected path before expansion.

Incorrect Answers

A:

“Check only that the device hostname is listed in the inventory, without examining cpm policer tuning behavior” targets a different operation from the reported requirement: “a control protocol is intermittently dropped after aggressive protection settings”. Correctly scoped policing balances CPU protection with valid protocol liveliness. The confirming result is: policer statistics and protocol session health match expected traffic rates. For the staged migration, validate the affected path before expansion.

B:

“Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior” targets a different operation from the reported requirement: “a control protocol is intermittently dropped after aggressive protection settings”. Correctly scoped policing balances CPU protection with valid protocol liveliness. The confirming result is: policer statistics and protocol session health match expected traffic rates. For the staged migration, validate the affected path before expansion.

D:

“Use an unrelated tenant dashboard as proof, without verifying the required cpm policer tuning condition” targets a different operation from the reported requirement: “a control protocol is intermittently dropped after aggressive protection settings”. Correctly scoped policing balances CPU protection with valid protocol liveliness. The confirming result is: policer statistics and protocol session health match expected traffic rates. For the staged migration, validate the affected path before expansion.

Question 244

In the fictional Summit-4 east pod, a change-freeze exception for a narrow operational fault, the team reports that an EVPN route is visible but is not imported into its intended tenant instance. A peer suggested: "Use the route distinguisher as a substitute for all import policy" That did not solve the constraint. What should be chosen instead?

  1. Raise log severity to turn route import on.
  2. Change the physical switchport speed to import EVPN VPN routes.
  3. Use the route distinguisher as a substitute for all import policy.
  4. Verify the route-target import and export policy for the target instance.

Explanation

Correct Answer

D:

Route targets control import/export membership for VPN routing information. For Summit-4, confirm the actual outcome: the intended routes are imported only by instances matching the designated targets.

Incorrect Answers

A:

“Raise log severity to turn route import on” targets a different operation from the reported requirement: “an EVPN route is visible but is not imported into its intended tenant instance”. Route targets control import/export membership for VPN routing information. The confirming result is: Verify the route-target import and export policy for the target instance.

B:

“Change the physical switchport speed to import EVPN VPN routes” targets a different operation from the reported requirement: “an EVPN route is visible but is not imported into its intended tenant instance”. Route targets control import/export membership for VPN routing information. The confirming result is: Verify the route-target import and export policy for the target instance.

C:

“Use the route distinguisher as a substitute for all import policy” targets a different operation from the reported requirement: “an EVPN route is visible but is not imported into its intended tenant instance”. Route targets control import/export membership for VPN routing information. The confirming result is: Verify the route-target import and export policy for the target instance.

Question 245

In the fictional Harbor-1 east pod, a staged top-of-rack rollout with a bounded maintenance window, the team reports that a remote overlay endpoint cannot be reached over the physical fabric. Which engineering action best satisfies this request?

  1. Restore IP routing reachability to the remote VTEP address in the underlay.
  2. Recreate the tenant VLAN without checking IP reachability.
  3. Change the application hostname while leaving the network unchanged.
  4. Disable BGP EVPN to hide underlay route loss.

Explanation

Correct Answer

A:

An overlay packet still needs an IP path to its outer tunnel destination. The option uses “Restore IP routing reachability to the remote VTEP address in the underlay” to address “a remote overlay endpoint cannot be reached over the physical fabric”. The result must be observed on the affected component.

Incorrect Answers

B:

“Recreate the tenant VLAN without checking IP reachability” targets a different operation from the reported requirement: “a remote overlay endpoint cannot be reached over the physical fabric”. An overlay packet still needs an IP path to its outer tunnel destination. Use the appropriate method: Restore IP routing reachability to the remote VTEP address in the underlay.

C:

“Change the application hostname while leaving the network unchanged” targets a different operation from the reported requirement: “a remote overlay endpoint cannot be reached over the physical fabric”. An overlay packet still needs an IP path to its outer tunnel destination. Use the appropriate method: Restore IP routing reachability to the remote VTEP address in the underlay.

D:

“Disable BGP EVPN to hide underlay route loss” targets a different operation from the reported requirement: “a remote overlay endpoint cannot be reached over the physical fabric”. An overlay packet still needs an IP path to its outer tunnel destination. Use the appropriate method: Restore IP routing reachability to the remote VTEP address in the underlay.

Question 246

In the fictional Pine-9 east pod, a replacement leaf with configuration review requirements, the team reports that a change should be evaluated before it reaches the active device configuration. An unrelated configuration change is being considered. Which focused remediation best addresses the described problem first?

  1. Assume a text editor changes active SR Linux state automatically.
  2. Make the edits in the candidate configuration workflow and review before commit.
  3. Modify archived syslog entries instead of the candidate datastore.
  4. Use a packet capture as the configuration transaction.

Explanation

Correct Answer

B:

A candidate workflow separates proposed changes from committed running state. The option uses “Make the edits in the candidate configuration workflow and review before commit” to address “a change should be evaluated before it reaches the active device configuration”. The result must be observed on the affected component. Confirm that the replacement leaf reaches the expected operational state.

Incorrect Answers

A:

“Assume a text editor changes active SR Linux state automatically” targets a different operation from the reported requirement: “a change should be evaluated before it reaches the active device configuration”. A candidate workflow separates proposed changes from committed running state. Use the appropriate method: Make the edits in the candidate configuration workflow and review before commit. Confirm that the replacement leaf reaches the expected operational state.

C:

“Modify archived syslog entries instead of the candidate datastore” targets a different operation from the reported requirement: “a change should be evaluated before it reaches the active device configuration”. A candidate workflow separates proposed changes from committed running state. Use the appropriate method: Make the edits in the candidate configuration workflow and review before commit. Confirm that the replacement leaf reaches the expected operational state.

D:

“Use a packet capture as the configuration transaction” targets a different operation from the reported requirement: “a change should be evaluated before it reaches the active device configuration”. A candidate workflow separates proposed changes from committed running state. Use the appropriate method: Make the edits in the candidate configuration workflow and review before commit. Confirm that the replacement leaf reaches the expected operational state.

Question 247

In the fictional Pine-9 east pod, a replacement leaf with configuration review requirements, the team reports that a remote tenant host moves to another leaf and reachability must be updated. An unrelated configuration change is being considered. Which focused remediation best addresses the described problem first?

  1. Use system ACL counters to advertise host movement.
  2. Use Type 5 IP-prefix routes as the only source of individual MAC location.
  3. Examine BGP EVPN Type 2 MAC/IP reachability advertisements.
  4. Treat the physical port description as a BGP EVPN update.

Explanation

Correct Answer

C:

EVPN MAC/IP advertisements carry endpoint reachability information for the L2 overlay. The option uses “Examine BGP EVPN Type 2 MAC/IP reachability advertisements” to address “a remote tenant host moves to another leaf and reachability must be updated”. The result must be observed on the affected component. Confirm that the replacement leaf reaches the expected operational state.

Incorrect Answers

A:

“Use system ACL counters to advertise host movement” targets a different operation from the reported requirement: “a remote tenant host moves to another leaf and reachability must be updated”. EVPN MAC/IP advertisements carry endpoint reachability information for the L2 overlay. Use the appropriate method: Examine BGP EVPN Type 2 MAC/IP reachability advertisements. Confirm that the replacement leaf reaches the expected operational state.

B:

“Use Type 5 IP-prefix routes as the only source of individual MAC location” targets a different operation from the reported requirement: “a remote tenant host moves to another leaf and reachability must be updated”. EVPN MAC/IP advertisements carry endpoint reachability information for the L2 overlay. Use the appropriate method: Examine BGP EVPN Type 2 MAC/IP reachability advertisements. Confirm that the replacement leaf reaches the expected operational state.

D:

“Treat the physical port description as a BGP EVPN update” targets a different operation from the reported requirement: “a remote tenant host moves to another leaf and reachability must be updated”. EVPN MAC/IP advertisements carry endpoint reachability information for the L2 overlay. Use the appropriate method: Examine BGP EVPN Type 2 MAC/IP reachability advertisements. Confirm that the replacement leaf reaches the expected operational state.

Question 248

In the fictional Pine-9 west pod, a replacement leaf with configuration review requirements, the team reports that remote tenant hosts in one subnet need bridged reachability over VXLAN. A peer suggested: "Put tenant endpoints solely in a remote unconnected IP-VRF" That did not solve the constraint. What should be chosen instead?

  1. Put tenant endpoints solely in a remote unconnected IP-VRF.
  2. Require all hosts to connect to the same physical access switch.
  3. Use only an underlay default route without an L2 overlay service.
  4. Build the MAC-VRF based L2 EVPN-VXLAN service with consistent identifiers.

Explanation

Correct Answer

D:

L2 EVPN couples tenant bridging with distributed MAC reachability and VXLAN transport. For Pine-9, confirm the actual outcome: local and remote tenant MAC learning is correct with no unplanned cross-tenant leakage.

Incorrect Answers

A:

“Put tenant endpoints solely in a remote unconnected IP-VRF” targets a different operation from the reported requirement: “remote tenant hosts in one subnet need bridged reachability over VXLAN”. L2 EVPN couples tenant bridging with distributed MAC reachability and VXLAN transport. Use the appropriate method: Build the MAC-VRF based L2 EVPN-VXLAN service with consistent identifiers. Confirm that the replacement leaf reaches the expected operational state.

B:

“Require all hosts to connect to the same physical access switch” targets a different operation from the reported requirement: “remote tenant hosts in one subnet need bridged reachability over VXLAN”. L2 EVPN couples tenant bridging with distributed MAC reachability and VXLAN transport. Use the appropriate method: Build the MAC-VRF based L2 EVPN-VXLAN service with consistent identifiers. Confirm that the replacement leaf reaches the expected operational state.

C:

“Use only an underlay default route without an L2 overlay service” targets a different operation from the reported requirement: “remote tenant hosts in one subnet need bridged reachability over VXLAN”. L2 EVPN couples tenant bridging with distributed MAC reachability and VXLAN transport. Use the appropriate method: Build the MAC-VRF based L2 EVPN-VXLAN service with consistent identifiers. Confirm that the replacement leaf reaches the expected operational state.

Question 249

In the fictional Summit-4 east pod, a change-freeze exception for a narrow operational fault, the team reports that separate customers must not share unintended bridge or routing tables. The shift handoff must specify a defensible solution and the observable service outcome. Which recommendation is technically justified?

  1. Associate tenant segments with appropriate MAC-VRFs and IP-VRFs.
  2. Disable all segmentation and rely on hostnames.
  3. Assign the same L2 broadcast domain to every customer.
  4. Put every tenant into the default network instance without controls.

Explanation

Correct Answer

A:

Distinct virtual routing and bridging instances provide explicit tenant forwarding boundaries. For Summit-4, confirm the actual outcome: tenant routes and MACs occur only in the intended network instances.

Incorrect Answers

B:

“Disable all segmentation and rely on hostnames” targets a different operation from the reported requirement: “separate customers must not share unintended bridge or routing tables”. Distinct virtual routing and bridging instances provide explicit tenant forwarding boundaries. Use the appropriate method: Associate tenant segments with appropriate MAC-VRFs and IP-VRFs.

C:

“Assign the same L2 broadcast domain to every customer” targets a different operation from the reported requirement: “separate customers must not share unintended bridge or routing tables”. Distinct virtual routing and bridging instances provide explicit tenant forwarding boundaries. Use the appropriate method: Associate tenant segments with appropriate MAC-VRFs and IP-VRFs.

D:

“Put every tenant into the default network instance without controls” targets a different operation from the reported requirement: “separate customers must not share unintended bridge or routing tables”. Distinct virtual routing and bridging instances provide explicit tenant forwarding boundaries. Use the appropriate method: Associate tenant segments with appropriate MAC-VRFs and IP-VRFs.

Question 250

In the fictional North-10 east pod, a commissioning exercise under the on-call team, the team reports that a route is present but only one of several equal-cost paths is actually eligible. Which engineering action best satisfies this request?

  1. Modify a tenant ACL without checking next-hop selection.
  2. Inspect installed route and next-hop eligibility before changing link policy.
  3. Assume BGP established state guarantees that every path is in ECMP.
  4. Change a VLAN name to rebalance layer 3 forwarding.

Explanation

Correct Answer

B:

Only installed eligible equal-cost next hops can participate in forwarding. The option uses “Inspect installed route and next-hop eligibility before changing link policy” to address “a route is present but only one of several equal-cost paths is actually eligible”. The result must be observed on the affected component. Before onboarding, test that the intended fabric state exists.

Incorrect Answers

A:

“Modify a tenant ACL without checking next-hop selection” targets a different operation from the reported requirement: “a route is present but only one of several equal-cost paths is actually eligible”. Only installed eligible equal-cost next hops can participate in forwarding. Use the appropriate method: Inspect installed route and next-hop eligibility before changing link policy. Before onboarding, test that the intended fabric state exists.

C:

“Assume BGP established state guarantees that every path is in ECMP” targets a different operation from the reported requirement: “a route is present but only one of several equal-cost paths is actually eligible”. Only installed eligible equal-cost next hops can participate in forwarding. Use the appropriate method: Inspect installed route and next-hop eligibility before changing link policy. Before onboarding, test that the intended fabric state exists.

D:

“Change a VLAN name to rebalance layer 3 forwarding” targets a different operation from the reported requirement: “a route is present but only one of several equal-cost paths is actually eligible”. Only installed eligible equal-cost next hops can participate in forwarding. Use the appropriate method: Inspect installed route and next-hop eligibility before changing link policy. Before onboarding, test that the intended fabric state exists.

Nokia Data Center Fabric Fundamentals (4A0-D01) Practice Tests