mcAfee Secure Website
exam =5
exam =6

Exam Code: 4A0-D01

Exam Name: Nokia Data Center Fabric Fundamentals

Certification Provider: Nokia

Nokia 4A0-D01 Questions & Answers

Reliable & Actual Study Materials for 4A0-D01 Exam Success

61 Questions & Answers with Testing Engine

"4A0-D01: Nokia Data Center Fabric Fundamentals" Testing Engine covers all the knowledge points of the real Nokia 4A0-D01 exam.

The latest actual 4A0-D01 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at 4A0-D01 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Nokia Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Nokia 4A0-D01 Practice Test 19

Question 180

In the fictional Summit-4 east pod, a change-freeze exception for a narrow operational fault, the team reports that a fresh switch boots normally but fails to retrieve its startup configuration. The shift handoff must specify a defensible solution and the observable service outcome. Which recommendation is technically justified?

  1. Disable every management interface to force ZTP to work.
  2. Change live EVPN Type 2 entries before validating bootstrap transport.
  3. Inspect only production tenant MAC-VRF routes.
  4. Check bootstrap networking, DHCP-provided information and referenced server availability.

Explanation

Correct Answer

D:

Bootstrap failure often comes from missing or unreachable provisioning prerequisites. The option uses “Check bootstrap networking, DHCP-provided information and referenced server availability” to address “a fresh switch boots normally but fails to retrieve its startup configuration”. The result must be observed on the affected component.

Incorrect Answers

A:

“Disable every management interface to force ZTP to work” targets a different operation from the reported requirement: “a fresh switch boots normally but fails to retrieve its startup configuration”. Bootstrap failure often comes from missing or unreachable provisioning prerequisites. Use the appropriate method: Check bootstrap networking, DHCP-provided information and referenced server availability.

B:

“Change live EVPN Type 2 entries before validating bootstrap transport” targets a different operation from the reported requirement: “a fresh switch boots normally but fails to retrieve its startup configuration”. Bootstrap failure often comes from missing or unreachable provisioning prerequisites. Use the appropriate method: Check bootstrap networking, DHCP-provided information and referenced server availability.

C:

“Inspect only production tenant MAC-VRF routes” targets a different operation from the reported requirement: “a fresh switch boots normally but fails to retrieve its startup configuration”. Bootstrap failure often comes from missing or unreachable provisioning prerequisites. Use the appropriate method: Check bootstrap networking, DHCP-provided information and referenced server availability.

Question 181

In the fictional Pine-9 east pod, a replacement leaf with configuration review requirements, the team reports that a newly installed switchport is administratively disabled. The shift handoff must specify a defensible solution and the observable service outcome. Which recommendation is technically justified?

  1. Enable the appropriate interface in configuration and check its operational status.
  2. Advertise an EVPN route before enabling the physical port.
  3. Create a BGP route target to power the transceiver.
  4. Change the tenant MAC-VRF without touching the down port.

Explanation

Correct Answer

A:

Administrative configuration and physical state must both be correct for the port to work. The option uses “Enable the appropriate interface in configuration and check its operational status” to address “a newly installed switchport is administratively disabled”. The result must be observed on the affected component. Confirm that the replacement leaf reaches the expected operational state.

Incorrect Answers

B:

“Advertise an EVPN route before enabling the physical port” targets a different operation from the reported requirement: “a newly installed switchport is administratively disabled”. Administrative configuration and physical state must both be correct for the port to work. Use the appropriate method: Enable the appropriate interface in configuration and check its operational status. Confirm that the replacement leaf reaches the expected operational state.

C:

“Create a BGP route target to power the transceiver” targets a different operation from the reported requirement: “a newly installed switchport is administratively disabled”. Administrative configuration and physical state must both be correct for the port to work. Use the appropriate method: Enable the appropriate interface in configuration and check its operational status. Confirm that the replacement leaf reaches the expected operational state.

D:

“Change the tenant MAC-VRF without touching the down port” targets a different operation from the reported requirement: “a newly installed switchport is administratively disabled”. Administrative configuration and physical state must both be correct for the port to work. Use the appropriate method: Enable the appropriate interface in configuration and check its operational status. Confirm that the replacement leaf reaches the expected operational state.

Question 182

In the fictional Canyon-5 west pod, a fabric operations audit prior to tenant onboarding, the team reports that operators need to compare desired fabric behavior with measured network state. The planned change is "Use EDA observability with state-driven monitoring and event correlation." Which post-change observation best validates the intended technical behavior?

  1. Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior.
  2. Verify that telemetry and events show whether deployed behavior matches intended service state.
  3. Use an unrelated tenant dashboard as proof, without verifying the required eda observability condition.
  4. Check only that the device hostname is listed in the inventory, without examining eda observability behavior.

Explanation

Correct Answer

B:

Observability connects operational measurements and events to intended network operation. The option uses “Verify that telemetry and events show whether deployed behavior matches intended service state” to address “operators need to compare desired fabric behavior with measured network state”. The acceptance test is: telemetry and events show whether deployed behavior matches intended service state. Before onboarding, test that the intended fabric state exists.

Incorrect Answers

A:

“Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior” targets a different operation from the reported requirement: “operators need to compare desired fabric behavior with measured network state”. Observability connects operational measurements and events to intended network operation. The confirming result is: telemetry and events show whether deployed behavior matches intended service state. Before onboarding, test that the intended fabric state exists.

C:

“Use an unrelated tenant dashboard as proof, without verifying the required eda observability condition” targets a different operation from the reported requirement: “operators need to compare desired fabric behavior with measured network state”. Observability connects operational measurements and events to intended network operation. The confirming result is: telemetry and events show whether deployed behavior matches intended service state. Before onboarding, test that the intended fabric state exists.

D:

“Check only that the device hostname is listed in the inventory, without examining eda observability behavior” targets a different operation from the reported requirement: “operators need to compare desired fabric behavior with measured network state”. Observability connects operational measurements and events to intended network operation. The confirming result is: telemetry and events show whether deployed behavior matches intended service state. Before onboarding, test that the intended fabric state exists.

Question 183

In the fictional Atlas-7 east pod, a service recovery task following a partial path outage, the team reports that several static routes must share a maintained forwarding next-hop selection. The shift handoff must specify a defensible solution and the observable service outcome. Which recommendation is technically justified?

  1. Repeat arbitrary interface aliases as route next hops.
  2. Put all static routes into the MAC address learning table.
  3. Define and reference an appropriate next-hop group.
  4. Use the EDA service intent name as an IP gateway.

Explanation

Correct Answer

C:

A next-hop group separates forwarding next-hop membership from destination-prefix entries. The option uses “Define and reference an appropriate next-hop group” to address “several static routes must share a maintained forwarding next-hop selection”. The result must be observed on the affected component. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

Incorrect Answers

A:

“Repeat arbitrary interface aliases as route next hops” targets a different operation from the reported requirement: “several static routes must share a maintained forwarding next-hop selection”. A next-hop group separates forwarding next-hop membership from destination-prefix entries. Use the appropriate method: Define and reference an appropriate next-hop group. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

B:

“Put all static routes into the MAC address learning table” targets a different operation from the reported requirement: “several static routes must share a maintained forwarding next-hop selection”. A next-hop group separates forwarding next-hop membership from destination-prefix entries. Use the appropriate method: Define and reference an appropriate next-hop group. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

D:

“Use the EDA service intent name as an IP gateway” targets a different operation from the reported requirement: “several static routes must share a maintained forwarding next-hop selection”. A next-hop group separates forwarding next-hop membership from destination-prefix entries. Use the appropriate method: Define and reference an appropriate next-hop group. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

Question 184

In the fictional Atlas-7 east pod, a service recovery task following a partial path outage, the team reports that operators disagree whether a deployed interface ACL actually matches the failing flow. A peer suggested: "Assume zero-interface-error count proves an ACL permit decision" That did not solve the constraint. What should be chosen instead?

  1. Replace a MAC-VRF as a substitute for ACL telemetry.
  2. Use only a route table to prove which ACL entry matched.
  3. Assume zero-interface-error count proves an ACL permit decision.
  4. Inspect ACL hit counters and correlate them with test traffic.

Explanation

Correct Answer

D:

ACL entry counters can substantiate matching behavior when correlated with the flow. The option uses “Inspect ACL hit counters and correlate them with test traffic” to address “operators disagree whether a deployed interface ACL actually matches the failing flow”. The result must be observed on the affected component. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

Incorrect Answers

A:

“Replace a MAC-VRF as a substitute for ACL telemetry” targets a different operation from the reported requirement: “operators disagree whether a deployed interface ACL actually matches the failing flow”. ACL entry counters can substantiate matching behavior when correlated with the flow. Use the appropriate method: Inspect ACL hit counters and correlate them with test traffic. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

B:

“Use only a route table to prove which ACL entry matched” targets a different operation from the reported requirement: “operators disagree whether a deployed interface ACL actually matches the failing flow”. ACL entry counters can substantiate matching behavior when correlated with the flow. Use the appropriate method: Inspect ACL hit counters and correlate them with test traffic. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

C:

“Assume zero-interface-error count proves an ACL permit decision” targets a different operation from the reported requirement: “operators disagree whether a deployed interface ACL actually matches the failing flow”. ACL entry counters can substantiate matching behavior when correlated with the flow. Use the appropriate method: Inspect ACL hit counters and correlate them with test traffic. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

Question 185

In the fictional Summit-4 west pod, a change-freeze exception for a narrow operational fault, the team reports that a VLAN-backed tenant segment is being extended using VXLAN. The shift handoff must specify a defensible solution and the observable service outcome. Which recommendation is technically justified?

  1. Map the intended local tenant bridging context to the correct VNI.
  2. Replace VNI configuration with a static IPv4 default route.
  3. Apply a system ACL to name a tenant broadcast segment.
  4. Use the BGP AS number as an automatic VLAN-to-VNI mapping.

Explanation

Correct Answer

A:

A VNI identifies the logical VXLAN segment carried over the IP fabric. For Summit-4, confirm the actual outcome: both VTEPs use the intended VNI for the tenant segment.

Incorrect Answers

B:

“Replace VNI configuration with a static IPv4 default route” targets a different operation from the reported requirement: “a VLAN-backed tenant segment is being extended using VXLAN”. A VNI identifies the logical VXLAN segment carried over the IP fabric. Use the appropriate method: Map the intended local tenant bridging context to the correct VNI.

C:

“Apply a system ACL to name a tenant broadcast segment” targets a different operation from the reported requirement: “a VLAN-backed tenant segment is being extended using VXLAN”. A VNI identifies the logical VXLAN segment carried over the IP fabric. Use the appropriate method: Map the intended local tenant bridging context to the correct VNI.

D:

“Use the BGP AS number as an automatic VLAN-to-VNI mapping” targets a different operation from the reported requirement: “a VLAN-backed tenant segment is being extended using VXLAN”. A VNI identifies the logical VXLAN segment carried over the IP fabric. Use the appropriate method: Map the intended local tenant bridging context to the correct VNI.

Question 186

In the fictional Summit-4 west pod, a change-freeze exception for a narrow operational fault, the team reports that multiple tenant subnets must communicate but unrelated tenants must remain isolated. A peer suggested: "Bridge all tenants into the same MAC-VRF to make routes unnecessary" That did not solve the constraint. What should be chosen instead?

  1. Replace EVPN routing with logging-only policies.
  2. Use tenant-specific IP-VRF routing with the intended L3 EVPN overlay service.
  3. Share a single unrestricted default route table among customers.
  4. Bridge all tenants into the same MAC-VRF to make routes unnecessary.

Explanation

Correct Answer

B:

Tenant-specific L3 EVPN separates inter-subnet routing from cross-customer leakage. For Summit-4, confirm the actual outcome: routing works between authorized tenant subnets without unauthorized VRF crossing.

Incorrect Answers

A:

“Replace EVPN routing with logging-only policies” targets a different operation from the reported requirement: “multiple tenant subnets must communicate but unrelated tenants must remain isolated”. Tenant-specific L3 EVPN separates inter-subnet routing from cross-customer leakage. Use the appropriate method: Use tenant-specific IP-VRF routing with the intended L3 EVPN overlay service.

C:

“Share a single unrestricted default route table among customers” targets a different operation from the reported requirement: “multiple tenant subnets must communicate but unrelated tenants must remain isolated”. Tenant-specific L3 EVPN separates inter-subnet routing from cross-customer leakage. Use the appropriate method: Use tenant-specific IP-VRF routing with the intended L3 EVPN overlay service.

D:

“Bridge all tenants into the same MAC-VRF to make routes unnecessary” targets a different operation from the reported requirement: “multiple tenant subnets must communicate but unrelated tenants must remain isolated”. Tenant-specific L3 EVPN separates inter-subnet routing from cross-customer leakage. Use the appropriate method: Use tenant-specific IP-VRF routing with the intended L3 EVPN overlay service.

Question 187

In the fictional Ridge-2 west pod, a secondary data hall with tenant isolation requirements, the team reports that a control protocol is intermittently dropped after aggressive protection settings. A peer suggested: "Disable every routing policy to bypass CPU filtering" That did not solve the constraint. What should be chosen instead?

  1. Change the system time zone to eliminate policing.
  2. Increase interface CRC counters manually to hide packet drops.
  3. Review CPM classification and policer rates against required control traffic.
  4. Disable every routing policy to bypass CPU filtering.

Explanation

Correct Answer

C:

Correctly scoped policing balances CPU protection with valid protocol liveliness. For Ridge-2, confirm the actual outcome: policer statistics and protocol session health match expected traffic rates.

Incorrect Answers

A:

“Change the system time zone to eliminate policing” targets a different operation from the reported requirement: “a control protocol is intermittently dropped after aggressive protection settings”. Correctly scoped policing balances CPU protection with valid protocol liveliness. Use the appropriate method: Review CPM classification and policer rates against required control traffic.

B:

“Increase interface CRC counters manually to hide packet drops” targets a different operation from the reported requirement: “a control protocol is intermittently dropped after aggressive protection settings”. Correctly scoped policing balances CPU protection with valid protocol liveliness. Use the appropriate method: Review CPM classification and policer rates against required control traffic.

D:

“Disable every routing policy to bypass CPU filtering” targets a different operation from the reported requirement: “a control protocol is intermittently dropped after aggressive protection settings”. Correctly scoped policing balances CPU protection with valid protocol liveliness. Use the appropriate method: Review CPM classification and policer rates against required control traffic.

Question 188

In the fictional Delta-6 east pod, a controller-managed extension requiring reproducible evidence, the team reports that two remote VTEPs must carry a tenant overlay across routed links. Which engineering action best satisfies this request?

  1. Use BFD alone as a replacement for VXLAN packet encapsulation.
  2. Convert every spine interface to an untagged access port.
  3. Treat the tenant service route target as an underlay IP gateway.
  4. Configure matching VTEP reachability and VXLAN overlay endpoint settings.

Explanation

Correct Answer

D:

VTEPs encapsulate and decapsulate VXLAN traffic using reachable outer IP endpoints. The option uses “Configure matching VTEP reachability and VXLAN overlay endpoint settings” to address “two remote VTEPs must carry a tenant overlay across routed links”. The result must be observed on the affected component.

Incorrect Answers

A:

“Use BFD alone as a replacement for VXLAN packet encapsulation” targets a different operation from the reported requirement: “two remote VTEPs must carry a tenant overlay across routed links”. VTEPs encapsulate and decapsulate VXLAN traffic using reachable outer IP endpoints. Use the appropriate method: Configure matching VTEP reachability and VXLAN overlay endpoint settings.

B:

“Convert every spine interface to an untagged access port” targets a different operation from the reported requirement: “two remote VTEPs must carry a tenant overlay across routed links”. VTEPs encapsulate and decapsulate VXLAN traffic using reachable outer IP endpoints. Use the appropriate method: Configure matching VTEP reachability and VXLAN overlay endpoint settings.

C:

“Treat the tenant service route target as an underlay IP gateway” targets a different operation from the reported requirement: “two remote VTEPs must carry a tenant overlay across routed links”. VTEPs encapsulate and decapsulate VXLAN traffic using reachable outer IP endpoints. Use the appropriate method: Configure matching VTEP reachability and VXLAN overlay endpoint settings.

Question 189

In the fictional Summit-4 west pod, a change-freeze exception for a narrow operational fault, the team reports that the fabric must limit large shared Layer 2 failure domains. Which engineering action best satisfies this request?

  1. Use Layer 3 routed links between leaf and spine switches.
  2. Stretch one unbroken VLAN over every underlay link.
  3. Rely on an overlay tunnel without any IP routing underneath.
  4. Build the fabric from a single shared collision domain.

Explanation

Correct Answer

A:

A routed underlay confines broadcast domains and supplies IP reachability for the overlay. For Summit-4, confirm the actual outcome: routed underlay next hops reach all required VTEPs.

Incorrect Answers

B:

“Stretch one unbroken VLAN over every underlay link” targets a different operation from the reported requirement: “the fabric must limit large shared Layer 2 failure domains”. A routed underlay confines broadcast domains and supplies IP reachability for the overlay. Use the appropriate method: Use Layer 3 routed links between leaf and spine switches.

C:

“Rely on an overlay tunnel without any IP routing underneath” targets a different operation from the reported requirement: “the fabric must limit large shared Layer 2 failure domains”. A routed underlay confines broadcast domains and supplies IP reachability for the overlay. Use the appropriate method: Use Layer 3 routed links between leaf and spine switches.

D:

“Build the fabric from a single shared collision domain” targets a different operation from the reported requirement: “the fabric must limit large shared Layer 2 failure domains”. A routed underlay confines broadcast domains and supplies IP reachability for the overlay. Use the appropriate method: Use Layer 3 routed links between leaf and spine switches.

Question 190

In the fictional Atlas-7 east pod, a service recovery task following a partial path outage, the team reports that multiple tenant subnets must communicate but unrelated tenants must remain isolated. An unrelated configuration change is being considered. Which focused remediation best addresses the described problem first?

  1. Replace EVPN routing with logging-only policies.
  2. Use tenant-specific IP-VRF routing with the intended L3 EVPN overlay service.
  3. Bridge all tenants into the same MAC-VRF to make routes unnecessary.
  4. Share a single unrestricted default route table among customers.

Explanation

Correct Answer

B:

Tenant-specific L3 EVPN separates inter-subnet routing from cross-customer leakage. The option uses “Use tenant-specific IP-VRF routing with the intended L3 EVPN overlay service” to address “multiple tenant subnets must communicate but unrelated tenants must remain isolated”. The result must be observed on the affected component. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

Incorrect Answers

A:

“Replace EVPN routing with logging-only policies” targets a different operation from the reported requirement: “multiple tenant subnets must communicate but unrelated tenants must remain isolated”. Tenant-specific L3 EVPN separates inter-subnet routing from cross-customer leakage. Use the appropriate method: Use tenant-specific IP-VRF routing with the intended L3 EVPN overlay service. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

C:

“Bridge all tenants into the same MAC-VRF to make routes unnecessary” targets a different operation from the reported requirement: “multiple tenant subnets must communicate but unrelated tenants must remain isolated”. Tenant-specific L3 EVPN separates inter-subnet routing from cross-customer leakage. Use the appropriate method: Use tenant-specific IP-VRF routing with the intended L3 EVPN overlay service. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

D:

“Share a single unrestricted default route table among customers” targets a different operation from the reported requirement: “multiple tenant subnets must communicate but unrelated tenants must remain isolated”. Tenant-specific L3 EVPN separates inter-subnet routing from cross-customer leakage. Use the appropriate method: Use tenant-specific IP-VRF routing with the intended L3 EVPN overlay service. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

Nokia Data Center Fabric Fundamentals (4A0-D01) Practice Tests