mcAfee Secure Website
exam =5
exam =6

Exam Code: 4A0-D01

Exam Name: Nokia Data Center Fabric Fundamentals

Certification Provider: Nokia

Nokia 4A0-D01 Questions & Answers

Reliable & Actual Study Materials for 4A0-D01 Exam Success

61 Questions & Answers with Testing Engine

"4A0-D01: Nokia Data Center Fabric Fundamentals" Testing Engine covers all the knowledge points of the real Nokia 4A0-D01 exam.

The latest actual 4A0-D01 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at 4A0-D01 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Nokia Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Nokia 4A0-D01 Practice Test 18

Question 170

In the fictional Canyon-5 west pod, a fabric operations audit prior to tenant onboarding, the team reports that automation must distinguish configured interface intent from observed link health. Which engineering action best satisfies this request?

  1. Treat desired admin state as proof of operational signal.
  2. Read the appropriate modeled configuration and state objects separately.
  3. Rely on VLAN names as physical transceiver measurements.
  4. Use an EVPN route target as the source of optics health.

Explanation

Correct Answer

B:

A configured value and an operationally measured value answer different questions. For Canyon-5, confirm the actual outcome: the model shows both intended admin setting and actual operational status.

Incorrect Answers

A:

“Treat desired admin state as proof of operational signal” targets a different operation from the reported requirement: “automation must distinguish configured interface intent from observed link health”. A configured value and an operationally measured value answer different questions. Use the appropriate method: Read the appropriate modeled configuration and state objects separately. Before onboarding, test that the intended fabric state exists.

C:

“Rely on VLAN names as physical transceiver measurements” targets a different operation from the reported requirement: “automation must distinguish configured interface intent from observed link health”. A configured value and an operationally measured value answer different questions. Use the appropriate method: Read the appropriate modeled configuration and state objects separately. Before onboarding, test that the intended fabric state exists.

D:

“Use an EVPN route target as the source of optics health” targets a different operation from the reported requirement: “automation must distinguish configured interface intent from observed link health”. A configured value and an operationally measured value answer different questions. Use the appropriate method: Read the appropriate modeled configuration and state objects separately. Before onboarding, test that the intended fabric state exists.

Question 171

In the fictional Canyon-5 west pod, a fabric operations audit prior to tenant onboarding, the team reports that a remote tenant host moves to another leaf and reachability must be updated. An unrelated configuration change is being considered. Which focused remediation best addresses the described problem first?

  1. Use Type 5 IP-prefix routes as the only source of individual MAC location.
  2. Use system ACL counters to advertise host movement.
  3. Examine BGP EVPN Type 2 MAC/IP reachability advertisements.
  4. Treat the physical port description as a BGP EVPN update.

Explanation

Correct Answer

C:

EVPN MAC/IP advertisements carry endpoint reachability information for the L2 overlay. For Canyon-5, confirm the actual outcome: the active remote host MAC/IP is associated with the expected VTEP.

Incorrect Answers

A:

“Use Type 5 IP-prefix routes as the only source of individual MAC location” targets a different operation from the reported requirement: “a remote tenant host moves to another leaf and reachability must be updated”. EVPN MAC/IP advertisements carry endpoint reachability information for the L2 overlay. Use the appropriate method: Examine BGP EVPN Type 2 MAC/IP reachability advertisements. Before onboarding, test that the intended fabric state exists.

B:

“Use system ACL counters to advertise host movement” targets a different operation from the reported requirement: “a remote tenant host moves to another leaf and reachability must be updated”. EVPN MAC/IP advertisements carry endpoint reachability information for the L2 overlay. Use the appropriate method: Examine BGP EVPN Type 2 MAC/IP reachability advertisements. Before onboarding, test that the intended fabric state exists.

D:

“Treat the physical port description as a BGP EVPN update” targets a different operation from the reported requirement: “a remote tenant host moves to another leaf and reachability must be updated”. EVPN MAC/IP advertisements carry endpoint reachability information for the L2 overlay. Use the appropriate method: Examine BGP EVPN Type 2 MAC/IP reachability advertisements. Before onboarding, test that the intended fabric state exists.

Question 172

In the fictional Delta-6 west pod, a controller-managed extension requiring reproducible evidence, the team reports that a route is present but only one of several equal-cost paths is actually eligible. The shift handoff must specify a defensible solution and the observable service outcome. Which recommendation is technically justified?

  1. Change a VLAN name to rebalance layer 3 forwarding.
  2. Assume BGP established state guarantees that every path is in ECMP.
  3. Modify a tenant ACL without checking next-hop selection.
  4. Inspect installed route and next-hop eligibility before changing link policy.

Explanation

Correct Answer

D:

Only installed eligible equal-cost next hops can participate in forwarding. For Delta-6, confirm the actual outcome: the route has the expected eligible next-hop set in forwarding state.

Incorrect Answers

A:

“Change a VLAN name to rebalance layer 3 forwarding” targets a different operation from the reported requirement: “a route is present but only one of several equal-cost paths is actually eligible”. Only installed eligible equal-cost next hops can participate in forwarding. Use the appropriate method: Inspect installed route and next-hop eligibility before changing link policy.

B:

“Assume BGP established state guarantees that every path is in ECMP” targets a different operation from the reported requirement: “a route is present but only one of several equal-cost paths is actually eligible”. Only installed eligible equal-cost next hops can participate in forwarding. Use the appropriate method: Inspect installed route and next-hop eligibility before changing link policy.

C:

“Modify a tenant ACL without checking next-hop selection” targets a different operation from the reported requirement: “a route is present but only one of several equal-cost paths is actually eligible”. Only installed eligible equal-cost next hops can participate in forwarding. Use the appropriate method: Inspect installed route and next-hop eligibility before changing link policy.

Question 173

In the fictional Metro-8 west pod, a multi-tenant fabric undergoing documented validation, the team reports that a risky change requires a reliable return point. Which engineering action best satisfies this request?

  1. Take and retain a configuration checkpoint before applying the change.
  2. Delete all prior configuration history before testing.
  3. Change random route preferences to force recovery.
  4. Rely on a single CLI screenshot as an automatic rollback.

Explanation

Correct Answer

A:

A checkpoint provides an explicit configuration reference for controlled rollback. For Metro-8, confirm the actual outcome: the recorded checkpoint is available and maps to the intended prechange state.

Incorrect Answers

B:

“Delete all prior configuration history before testing” targets a different operation from the reported requirement: “a risky change requires a reliable return point”. A checkpoint provides an explicit configuration reference for controlled rollback. Use the appropriate method: Take and retain a configuration checkpoint before applying the change. Observe the relevant forwarding/control-plane behavior under the approved test.

C:

“Change random route preferences to force recovery” targets a different operation from the reported requirement: “a risky change requires a reliable return point”. A checkpoint provides an explicit configuration reference for controlled rollback. Use the appropriate method: Take and retain a configuration checkpoint before applying the change. Observe the relevant forwarding/control-plane behavior under the approved test.

D:

“Rely on a single CLI screenshot as an automatic rollback” targets a different operation from the reported requirement: “a risky change requires a reliable return point”. A checkpoint provides an explicit configuration reference for controlled rollback. Use the appropriate method: Take and retain a configuration checkpoint before applying the change. Observe the relevant forwarding/control-plane behavior under the approved test.

Question 174

In the fictional Summit-4 east pod, a change-freeze exception for a narrow operational fault, the team reports that a VXLAN endpoint sourced from a loopback address is unreachable. The shift handoff must specify a defensible solution and the observable service outcome. Which recommendation is technically justified?

  1. Rename the loopback without updating any IP routes.
  2. Ensure the loopback endpoint address is advertised and routed in the underlay.
  3. Advertise only a tenant MAC and ignore underlay reachability.
  4. Use a log severity filter as the reachability repair.

Explanation

Correct Answer

B:

Loopback-based tunnel endpoints require routed transport reachability. The option uses “Ensure the loopback endpoint address is advertised and routed in the underlay” to address “a VXLAN endpoint sourced from a loopback address is unreachable”. The result must be observed on the affected component.

Incorrect Answers

A:

“Rename the loopback without updating any IP routes” targets a different operation from the reported requirement: “a VXLAN endpoint sourced from a loopback address is unreachable”. Loopback-based tunnel endpoints require routed transport reachability. Use the appropriate method: Ensure the loopback endpoint address is advertised and routed in the underlay.

C:

“Advertise only a tenant MAC and ignore underlay reachability” targets a different operation from the reported requirement: “a VXLAN endpoint sourced from a loopback address is unreachable”. Loopback-based tunnel endpoints require routed transport reachability. Use the appropriate method: Ensure the loopback endpoint address is advertised and routed in the underlay.

D:

“Use a log severity filter as the reachability repair” targets a different operation from the reported requirement: “a VXLAN endpoint sourced from a loopback address is unreachable”. Loopback-based tunnel endpoints require routed transport reachability. Use the appropriate method: Ensure the loopback endpoint address is advertised and routed in the underlay.

Question 175

In the fictional Summit-4 west pod, a change-freeze exception for a narrow operational fault, the team reports that a team wants to add a supported custom operational command to SR Linux. A peer suggested: "Put a JavaScript snippet into an Ethernet frame" That did not solve the constraint. What should be chosen instead?

  1. Overwrite the YANG runtime by editing syslog output.
  2. Put a JavaScript snippet into an Ethernet frame.
  3. Use the SR Linux CLI plugin extension mechanism.
  4. Use route distinguishers to name local CLI commands.

Explanation

Correct Answer

C:

CLI plugins are the supported extension concept for additional CLI behavior. For Summit-4, confirm the actual outcome: the plugin command is present and returns the intended modeled information.

Incorrect Answers

A:

“Overwrite the YANG runtime by editing syslog output” targets a different operation from the reported requirement: “a team wants to add a supported custom operational command to SR Linux”. CLI plugins are the supported extension concept for additional CLI behavior. Use the appropriate method: Use the SR Linux CLI plugin extension mechanism.

B:

“Put a JavaScript snippet into an Ethernet frame” targets a different operation from the reported requirement: “a team wants to add a supported custom operational command to SR Linux”. CLI plugins are the supported extension concept for additional CLI behavior. Use the appropriate method: Use the SR Linux CLI plugin extension mechanism.

D:

“Use route distinguishers to name local CLI commands” targets a different operation from the reported requirement: “a team wants to add a supported custom operational command to SR Linux”. CLI plugins are the supported extension concept for additional CLI behavior. Use the appropriate method: Use the SR Linux CLI plugin extension mechanism.

Question 176

In the fictional North-10 east pod, a commissioning exercise under the on-call team, the team reports that an intermittent EVPN event requires a chronological evidence trail. A peer suggested: "Use a hostname change as a timestamp correlation technique" That did not solve the constraint. What should be chosen instead?

  1. Modify route-target values to create a log history.
  2. Assume a single ping reproduces the entire event sequence.
  3. Use a hostname change as a timestamp correlation technique.
  4. Inspect SR Linux operational logs with relevant timestamps and components.

Explanation

Correct Answer

D:

Logs provide timestamped operational context that can be correlated with state changes. The option uses “Inspect SR Linux operational logs with relevant timestamps and components” to address “an intermittent EVPN event requires a chronological evidence trail”. The result must be observed on the affected component. Before onboarding, test that the intended fabric state exists.

Incorrect Answers

A:

“Modify route-target values to create a log history” targets a different operation from the reported requirement: “an intermittent EVPN event requires a chronological evidence trail”. Logs provide timestamped operational context that can be correlated with state changes. Use the appropriate method: Inspect SR Linux operational logs with relevant timestamps and components. Before onboarding, test that the intended fabric state exists.

B:

“Assume a single ping reproduces the entire event sequence” targets a different operation from the reported requirement: “an intermittent EVPN event requires a chronological evidence trail”. Logs provide timestamped operational context that can be correlated with state changes. Use the appropriate method: Inspect SR Linux operational logs with relevant timestamps and components. Before onboarding, test that the intended fabric state exists.

C:

“Use a hostname change as a timestamp correlation technique” targets a different operation from the reported requirement: “an intermittent EVPN event requires a chronological evidence trail”. Logs provide timestamped operational context that can be correlated with state changes. Use the appropriate method: Inspect SR Linux operational logs with relevant timestamps and components. Before onboarding, test that the intended fabric state exists.

Question 177

In the fictional Atlas-7 east pod, a service recovery task following a partial path outage, the team reports that several static routes must share a maintained forwarding next-hop selection. A peer suggested: "Use the EDA service intent name as an IP gateway" That did not solve the constraint. What should be chosen instead?

  1. Define and reference an appropriate next-hop group.
  2. Put all static routes into the MAC address learning table.
  3. Use the EDA service intent name as an IP gateway.
  4. Repeat arbitrary interface aliases as route next hops.

Explanation

Correct Answer

A:

A next-hop group separates forwarding next-hop membership from destination-prefix entries. The option uses “Define and reference an appropriate next-hop group” to address “several static routes must share a maintained forwarding next-hop selection”. The result must be observed on the affected component. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

Incorrect Answers

B:

“Put all static routes into the MAC address learning table” targets a different operation from the reported requirement: “several static routes must share a maintained forwarding next-hop selection”. A next-hop group separates forwarding next-hop membership from destination-prefix entries. Use the appropriate method: Define and reference an appropriate next-hop group. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

C:

“Use the EDA service intent name as an IP gateway” targets a different operation from the reported requirement: “several static routes must share a maintained forwarding next-hop selection”. A next-hop group separates forwarding next-hop membership from destination-prefix entries. Use the appropriate method: Define and reference an appropriate next-hop group. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

D:

“Repeat arbitrary interface aliases as route next hops” targets a different operation from the reported requirement: “several static routes must share a maintained forwarding next-hop selection”. A next-hop group separates forwarding next-hop membership from destination-prefix entries. Use the appropriate method: Define and reference an appropriate next-hop group. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

Question 178

In the fictional North-10 west pod, a commissioning exercise under the on-call team, the team reports that management access to the switch itself must be restricted. An unrelated configuration change is being considered. Which focused remediation best addresses the described problem first?

  1. Use only a tenant interface ACL and assume it protects all device management.
  2. Use the applicable system ACL or management-access policy for device-bound traffic.
  3. Disable tenant EVPN routes to secure the management endpoint.
  4. Change a VXLAN VNI as an SSH authentication filter.

Explanation

Correct Answer

B:

System-level access filtering concerns traffic destined to the device, not just transit services. For North-10, confirm the actual outcome: management probes obey the intended permitted source and port policy.

Incorrect Answers

A:

“Use only a tenant interface ACL and assume it protects all device management” targets a different operation from the reported requirement: “management access to the switch itself must be restricted”. System-level access filtering concerns traffic destined to the device, not just transit services. Use the appropriate method: Use the applicable system ACL or management-access policy for device-bound traffic. Before onboarding, test that the intended fabric state exists.

C:

“Disable tenant EVPN routes to secure the management endpoint” targets a different operation from the reported requirement: “management access to the switch itself must be restricted”. System-level access filtering concerns traffic destined to the device, not just transit services. Use the appropriate method: Use the applicable system ACL or management-access policy for device-bound traffic. Before onboarding, test that the intended fabric state exists.

D:

“Change a VXLAN VNI as an SSH authentication filter” targets a different operation from the reported requirement: “management access to the switch itself must be restricted”. System-level access filtering concerns traffic destined to the device, not just transit services. Use the appropriate method: Use the applicable system ACL or management-access policy for device-bound traffic. Before onboarding, test that the intended fabric state exists.

Question 179

In the fictional Pine-9 east pod, a replacement leaf with configuration review requirements, the team reports that a newly installed switchport is administratively disabled. A peer suggested: "Create a BGP route target to power the transceiver" That did not solve the constraint. What should be chosen instead?

  1. Advertise an EVPN route before enabling the physical port.
  2. Change the tenant MAC-VRF without touching the down port.
  3. Enable the appropriate interface in configuration and check its operational status.
  4. Create a BGP route target to power the transceiver.

Explanation

Correct Answer

C:

Administrative configuration and physical state must both be correct for the port to work. The option uses “Enable the appropriate interface in configuration and check its operational status” to address “a newly installed switchport is administratively disabled”. The result must be observed on the affected component. Confirm that the replacement leaf reaches the expected operational state.

Incorrect Answers

A:

“Advertise an EVPN route before enabling the physical port” targets a different operation from the reported requirement: “a newly installed switchport is administratively disabled”. Administrative configuration and physical state must both be correct for the port to work. Use the appropriate method: Enable the appropriate interface in configuration and check its operational status. Confirm that the replacement leaf reaches the expected operational state.

B:

“Change the tenant MAC-VRF without touching the down port” targets a different operation from the reported requirement: “a newly installed switchport is administratively disabled”. Administrative configuration and physical state must both be correct for the port to work. Use the appropriate method: Enable the appropriate interface in configuration and check its operational status. Confirm that the replacement leaf reaches the expected operational state.

D:

“Create a BGP route target to power the transceiver” targets a different operation from the reported requirement: “a newly installed switchport is administratively disabled”. Administrative configuration and physical state must both be correct for the port to work. Use the appropriate method: Enable the appropriate interface in configuration and check its operational status. Confirm that the replacement leaf reaches the expected operational state.

Question 180

In the fictional Summit-4 east pod, a change-freeze exception for a narrow operational fault, the team reports that a fresh switch boots normally but fails to retrieve its startup configuration. The shift handoff must specify a defensible solution and the observable service outcome. Which recommendation is technically justified?

  1. Disable every management interface to force ZTP to work.
  2. Change live EVPN Type 2 entries before validating bootstrap transport.
  3. Inspect only production tenant MAC-VRF routes.
  4. Check bootstrap networking, DHCP-provided information and referenced server availability.

Explanation

Correct Answer

D:

Bootstrap failure often comes from missing or unreachable provisioning prerequisites. The option uses “Check bootstrap networking, DHCP-provided information and referenced server availability” to address “a fresh switch boots normally but fails to retrieve its startup configuration”. The result must be observed on the affected component.

Incorrect Answers

A:

“Disable every management interface to force ZTP to work” targets a different operation from the reported requirement: “a fresh switch boots normally but fails to retrieve its startup configuration”. Bootstrap failure often comes from missing or unreachable provisioning prerequisites. Use the appropriate method: Check bootstrap networking, DHCP-provided information and referenced server availability.

B:

“Change live EVPN Type 2 entries before validating bootstrap transport” targets a different operation from the reported requirement: “a fresh switch boots normally but fails to retrieve its startup configuration”. Bootstrap failure often comes from missing or unreachable provisioning prerequisites. Use the appropriate method: Check bootstrap networking, DHCP-provided information and referenced server availability.

C:

“Inspect only production tenant MAC-VRF routes” targets a different operation from the reported requirement: “a fresh switch boots normally but fails to retrieve its startup configuration”. Bootstrap failure often comes from missing or unreachable provisioning prerequisites. Use the appropriate method: Check bootstrap networking, DHCP-provided information and referenced server availability.

Nokia Data Center Fabric Fundamentals (4A0-D01) Practice Tests