mcAfee Secure Website
exam =5
exam =6

Exam Code: 4A0-D01

Exam Name: Nokia Data Center Fabric Fundamentals

Certification Provider: Nokia

Nokia 4A0-D01 Questions & Answers

Reliable & Actual Study Materials for 4A0-D01 Exam Success

61 Questions & Answers with Testing Engine

"4A0-D01: Nokia Data Center Fabric Fundamentals" Testing Engine covers all the knowledge points of the real Nokia 4A0-D01 exam.

The latest actual 4A0-D01 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at 4A0-D01 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Nokia Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Nokia 4A0-D01 Practice Test 16

Question 150

In the fictional Metro-8 west pod, a multi-tenant fabric undergoing documented validation, the team reports that two tenant Layer 2 segments need extension across a routed IP fabric. An unrelated configuration change is being considered. Which focused remediation best addresses the described problem first?

  1. Route raw Ethernet frames as unencapsulated IP datagrams.
  2. Use VXLAN encapsulation between reachable VTEPs.
  3. Use BGP alone as the packet data tunnel.
  4. Make all physical spine links carry the tenant access VLAN.

Explanation

Correct Answer

B:

VXLAN carries tenant frames inside outer IP/UDP transport across the routed fabric. For Metro-8, confirm the actual outcome: packet traces show VXLAN encapsulation between the expected VTEPs.

Incorrect Answers

A:

“Route raw Ethernet frames as unencapsulated IP datagrams” targets a different operation from the reported requirement: “two tenant Layer 2 segments need extension across a routed IP fabric”. VXLAN carries tenant frames inside outer IP/UDP transport across the routed fabric. Use the appropriate method: Use VXLAN encapsulation between reachable VTEPs. Observe the relevant forwarding/control-plane behavior under the approved test.

C:

“Use BGP alone as the packet data tunnel” targets a different operation from the reported requirement: “two tenant Layer 2 segments need extension across a routed IP fabric”. VXLAN carries tenant frames inside outer IP/UDP transport across the routed fabric. Use the appropriate method: Use VXLAN encapsulation between reachable VTEPs. Observe the relevant forwarding/control-plane behavior under the approved test.

D:

“Make all physical spine links carry the tenant access VLAN” targets a different operation from the reported requirement: “two tenant Layer 2 segments need extension across a routed IP fabric”. VXLAN carries tenant frames inside outer IP/UDP transport across the routed fabric. Use the appropriate method: Use VXLAN encapsulation between reachable VTEPs. Observe the relevant forwarding/control-plane behavior under the approved test.

Question 151

In the fictional Orchard-3 east pod, a lab-to-production migration after a successful canary, the team reports that an EVPN route is visible but is not imported into its intended tenant instance. Which engineering action best satisfies this request?

  1. Raise log severity to turn route import on.
  2. Use the route distinguisher as a substitute for all import policy.
  3. Verify the route-target import and export policy for the target instance.
  4. Change the physical switchport speed to import EVPN VPN routes.

Explanation

Correct Answer

C:

Route targets control import/export membership for VPN routing information. The option uses “Verify the route-target import and export policy for the target instance” to address “an EVPN route is visible but is not imported into its intended tenant instance”. The acceptance test is: the intended routes are imported only by instances matching the designated targets. For the staged migration, validate the affected path before expansion.

Incorrect Answers

A:

“Raise log severity to turn route import on” targets a different operation from the reported requirement: “an EVPN route is visible but is not imported into its intended tenant instance”. Route targets control import/export membership for VPN routing information. The confirming result is: the intended routes are imported only by instances matching the designated targets. For the staged migration, validate the affected path before expansion.

B:

“Use the route distinguisher as a substitute for all import policy” targets a different operation from the reported requirement: “an EVPN route is visible but is not imported into its intended tenant instance”. Route targets control import/export membership for VPN routing information. The confirming result is: the intended routes are imported only by instances matching the designated targets. For the staged migration, validate the affected path before expansion.

D:

“Change the physical switchport speed to import EVPN VPN routes” targets a different operation from the reported requirement: “an EVPN route is visible but is not imported into its intended tenant instance”. Route targets control import/export membership for VPN routing information. The confirming result is: the intended routes are imported only by instances matching the designated targets. For the staged migration, validate the affected path before expansion.

Question 152

In the fictional North-10 east pod, a commissioning exercise under the on-call team, the team reports that a leaf's routed BGP peering fails after peer-AS data was changed. The planned change is "Correct the neighbor addressing and peer autonomous system configuration." Which post-change observation best validates the intended technical behavior?

  1. Check only that the device hostname is listed in the inventory, without examining bgp neighbor identity behavior.
  2. Use an unrelated tenant dashboard as proof, without verifying the required bgp neighbor identity condition.
  3. Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior.
  4. Verify that the intended BGP neighbor is established with the correct peer identity.

Explanation

Correct Answer

D:

BGP session establishment requires consistent neighbor transport and AS expectations. The option uses “Verify that the intended BGP neighbor is established with the correct peer identity” to address “a leaf's routed BGP peering fails after peer-AS data was changed”. The acceptance test is: the intended BGP neighbor is established with the correct peer identity. Before onboarding, test that the intended fabric state exists.

Incorrect Answers

A:

“Check only that the device hostname is listed in the inventory, without examining bgp neighbor identity behavior” targets a different operation from the reported requirement: “a leaf's routed BGP peering fails after peer-AS data was changed”. BGP session establishment requires consistent neighbor transport and AS expectations. The confirming result is: the intended BGP neighbor is established with the correct peer identity. Before onboarding, test that the intended fabric state exists.

B:

“Use an unrelated tenant dashboard as proof, without verifying the required bgp neighbor identity condition” targets a different operation from the reported requirement: “a leaf's routed BGP peering fails after peer-AS data was changed”. BGP session establishment requires consistent neighbor transport and AS expectations. The confirming result is: the intended BGP neighbor is established with the correct peer identity. Before onboarding, test that the intended fabric state exists.

C:

“Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior” targets a different operation from the reported requirement: “a leaf's routed BGP peering fails after peer-AS data was changed”. BGP session establishment requires consistent neighbor transport and AS expectations. The confirming result is: the intended BGP neighbor is established with the correct peer identity. Before onboarding, test that the intended fabric state exists.

Question 153

In the fictional Pine-9 west pod, a replacement leaf with configuration review requirements, the team reports that a policy must restrict selected transit traffic entering one tenant-facing interface. The shift handoff must specify a defensible solution and the observable service outcome. Which recommendation is technically justified?

  1. Apply an appropriate ingress interface ACL to that attachment.
  2. Alter CLI aliases to block tenant traffic.
  3. Change a BGP route distinguisher as the packet filter.
  4. Apply only a management-plane system ACL to filter all transit packets.

Explanation

Correct Answer

A:

An interface ACL applies packet filtering to traffic on the scoped interface path. For Pine-9, confirm the actual outcome: matching transit flows are filtered while permitted flows continue.

Incorrect Answers

B:

“Alter CLI aliases to block tenant traffic” targets a different operation from the reported requirement: “a policy must restrict selected transit traffic entering one tenant-facing interface”. An interface ACL applies packet filtering to traffic on the scoped interface path. Use the appropriate method: Apply an appropriate ingress interface ACL to that attachment. Confirm that the replacement leaf reaches the expected operational state.

C:

“Change a BGP route distinguisher as the packet filter” targets a different operation from the reported requirement: “a policy must restrict selected transit traffic entering one tenant-facing interface”. An interface ACL applies packet filtering to traffic on the scoped interface path. Use the appropriate method: Apply an appropriate ingress interface ACL to that attachment. Confirm that the replacement leaf reaches the expected operational state.

D:

“Apply only a management-plane system ACL to filter all transit packets” targets a different operation from the reported requirement: “a policy must restrict selected transit traffic entering one tenant-facing interface”. An interface ACL applies packet filtering to traffic on the scoped interface path. Use the appropriate method: Apply an appropriate ingress interface ACL to that attachment. Confirm that the replacement leaf reaches the expected operational state.

Question 154

In the fictional North-10 west pod, a commissioning exercise under the on-call team, the team reports that a customer needs an isolated IPv4 route table. An unrelated configuration change is being considered. Which focused remediation best addresses the described problem first?

  1. Use only a MAC-VRF when separate L3 routes are required.
  2. Use a dedicated IP-VRF network instance for its Layer 3 routes.
  3. Use a CLI alias as the customer network instance.
  4. Put all customer prefixes into an unsegmented default routing table.

Explanation

Correct Answer

B:

An IP-VRF gives the tenant a distinct IP forwarding context. For North-10, confirm the actual outcome: the tenant's prefixes appear in the intended IP-VRF and not unrelated VRFs.

Incorrect Answers

A:

“Use only a MAC-VRF when separate L3 routes are required” targets a different operation from the reported requirement: “a customer needs an isolated IPv4 route table”. An IP-VRF gives the tenant a distinct IP forwarding context. Use the appropriate method: Use a dedicated IP-VRF network instance for its Layer 3 routes. Before onboarding, test that the intended fabric state exists.

C:

“Use a CLI alias as the customer network instance” targets a different operation from the reported requirement: “a customer needs an isolated IPv4 route table”. An IP-VRF gives the tenant a distinct IP forwarding context. Use the appropriate method: Use a dedicated IP-VRF network instance for its Layer 3 routes. Before onboarding, test that the intended fabric state exists.

D:

“Put all customer prefixes into an unsegmented default routing table” targets a different operation from the reported requirement: “a customer needs an isolated IPv4 route table”. An IP-VRF gives the tenant a distinct IP forwarding context. Use the appropriate method: Use a dedicated IP-VRF network instance for its Layer 3 routes. Before onboarding, test that the intended fabric state exists.

Question 155

In the fictional North-10 east pod, a commissioning exercise under the on-call team, the team reports that a leaf port must carry separate tagged tenant attachment networks. Which engineering action best satisfies this request?

  1. Use a BGP local preference as a VLAN identifier.
  2. Put all tenants into one untagged subinterface without segmentation.
  3. Define matching VLAN-tagged subinterfaces with the correct encapsulation.
  4. Configure a VXLAN VNI as a physical Ethernet speed.

Explanation

Correct Answer

C:

Subinterfaces permit explicit per-tag service attachment on an interface. The option uses “Define matching VLAN-tagged subinterfaces with the correct encapsulation” to address “a leaf port must carry separate tagged tenant attachment networks”. The result must be observed on the affected component. Before onboarding, test that the intended fabric state exists.

Incorrect Answers

A:

“Use a BGP local preference as a VLAN identifier” targets a different operation from the reported requirement: “a leaf port must carry separate tagged tenant attachment networks”. Subinterfaces permit explicit per-tag service attachment on an interface. Use the appropriate method: Define matching VLAN-tagged subinterfaces with the correct encapsulation. Before onboarding, test that the intended fabric state exists.

B:

“Put all tenants into one untagged subinterface without segmentation” targets a different operation from the reported requirement: “a leaf port must carry separate tagged tenant attachment networks”. Subinterfaces permit explicit per-tag service attachment on an interface. Use the appropriate method: Define matching VLAN-tagged subinterfaces with the correct encapsulation. Before onboarding, test that the intended fabric state exists.

D:

“Configure a VXLAN VNI as a physical Ethernet speed” targets a different operation from the reported requirement: “a leaf port must carry separate tagged tenant attachment networks”. Subinterfaces permit explicit per-tag service attachment on an interface. Use the appropriate method: Define matching VLAN-tagged subinterfaces with the correct encapsulation. Before onboarding, test that the intended fabric state exists.

Question 156

In the fictional Harbor-1 west pod, a staged top-of-rack rollout with a bounded maintenance window, the team reports that operations need machine-readable configuration and operational state. Which engineering action best satisfies this request?

  1. Infer device state only from an external spreadsheet.
  2. Treat free-form screen text as the sole authoritative schema.
  3. Store all device configuration in manually maintained CLI screenshots.
  4. Use SR Linux model-driven YANG configuration and state models.

Explanation

Correct Answer

D:

YANG describes a structured data model that management clients can interpret. For Harbor-1, confirm the actual outcome: retrieved modeled configuration and state reflect the target object accurately.

Incorrect Answers

A:

“Infer device state only from an external spreadsheet” targets a different operation from the reported requirement: “operations need machine-readable configuration and operational state”. YANG describes a structured data model that management clients can interpret. Use the appropriate method: Use SR Linux model-driven YANG configuration and state models.

B:

“Treat free-form screen text as the sole authoritative schema” targets a different operation from the reported requirement: “operations need machine-readable configuration and operational state”. YANG describes a structured data model that management clients can interpret. Use the appropriate method: Use SR Linux model-driven YANG configuration and state models.

C:

“Store all device configuration in manually maintained CLI screenshots” targets a different operation from the reported requirement: “operations need machine-readable configuration and operational state”. YANG describes a structured data model that management clients can interpret. Use the appropriate method: Use SR Linux model-driven YANG configuration and state models.

Question 157

In the fictional North-10 west pod, a commissioning exercise under the on-call team, the team reports that separate customers must not share unintended bridge or routing tables. A peer suggested: "Put every tenant into the default network instance without controls" That did not solve the constraint. What should be chosen instead?

  1. Associate tenant segments with appropriate MAC-VRFs and IP-VRFs.
  2. Assign the same L2 broadcast domain to every customer.
  3. Put every tenant into the default network instance without controls.
  4. Disable all segmentation and rely on hostnames.

Explanation

Correct Answer

A:

Distinct virtual routing and bridging instances provide explicit tenant forwarding boundaries. For North-10, confirm the actual outcome: tenant routes and MACs occur only in the intended network instances.

Incorrect Answers

B:

“Assign the same L2 broadcast domain to every customer” targets a different operation from the reported requirement: “separate customers must not share unintended bridge or routing tables”. Distinct virtual routing and bridging instances provide explicit tenant forwarding boundaries. Use the appropriate method: Associate tenant segments with appropriate MAC-VRFs and IP-VRFs. Before onboarding, test that the intended fabric state exists.

C:

“Put every tenant into the default network instance without controls” targets a different operation from the reported requirement: “separate customers must not share unintended bridge or routing tables”. Distinct virtual routing and bridging instances provide explicit tenant forwarding boundaries. Use the appropriate method: Associate tenant segments with appropriate MAC-VRFs and IP-VRFs. Before onboarding, test that the intended fabric state exists.

D:

“Disable all segmentation and rely on hostnames” targets a different operation from the reported requirement: “separate customers must not share unintended bridge or routing tables”. Distinct virtual routing and bridging instances provide explicit tenant forwarding boundaries. Use the appropriate method: Associate tenant segments with appropriate MAC-VRFs and IP-VRFs. Before onboarding, test that the intended fabric state exists.

Question 158

In the fictional Ridge-2 west pod, a secondary data hall with tenant isolation requirements, the team reports that the same tenant MAC oscillates between attachments and causes instability. An unrelated configuration change is being considered. Which focused remediation best addresses the described problem first?

  1. Increase BGP timers without examining the shifting MAC.
  2. Inspect and apply the MAC move controls and investigate the attachment loop.
  3. Change only the management username to stop MAC flaps.
  4. Turn the tenant L3 prefix into a static blackhole.

Explanation

Correct Answer

B:

MAC move visibility and controls address repeated endpoint relocation or loops in a bridge instance. For Ridge-2, confirm the actual outcome: MAC learning stabilizes on the intended attachment without recurrent move alarms.

Incorrect Answers

A:

“Increase BGP timers without examining the shifting MAC” targets a different operation from the reported requirement: “the same tenant MAC oscillates between attachments and causes instability”. MAC move visibility and controls address repeated endpoint relocation or loops in a bridge instance. Use the appropriate method: Inspect and apply the MAC move controls and investigate the attachment loop.

C:

“Change only the management username to stop MAC flaps” targets a different operation from the reported requirement: “the same tenant MAC oscillates between attachments and causes instability”. MAC move visibility and controls address repeated endpoint relocation or loops in a bridge instance. Use the appropriate method: Inspect and apply the MAC move controls and investigate the attachment loop.

D:

“Turn the tenant L3 prefix into a static blackhole” targets a different operation from the reported requirement: “the same tenant MAC oscillates between attachments and causes instability”. MAC move visibility and controls address repeated endpoint relocation or loops in a bridge instance. Use the appropriate method: Inspect and apply the MAC move controls and investigate the attachment loop.

Question 159

In the fictional Metro-8 west pod, a multi-tenant fabric undergoing documented validation, the team reports that remote tenant hosts in one subnet need bridged reachability over VXLAN. Which engineering action best satisfies this request?

  1. Put tenant endpoints solely in a remote unconnected IP-VRF.
  2. Require all hosts to connect to the same physical access switch.
  3. Build the MAC-VRF based L2 EVPN-VXLAN service with consistent identifiers.
  4. Use only an underlay default route without an L2 overlay service.

Explanation

Correct Answer

C:

L2 EVPN couples tenant bridging with distributed MAC reachability and VXLAN transport. For Metro-8, confirm the actual outcome: local and remote tenant MAC learning is correct with no unplanned cross-tenant leakage.

Incorrect Answers

A:

“Put tenant endpoints solely in a remote unconnected IP-VRF” targets a different operation from the reported requirement: “remote tenant hosts in one subnet need bridged reachability over VXLAN”. L2 EVPN couples tenant bridging with distributed MAC reachability and VXLAN transport. Use the appropriate method: Build the MAC-VRF based L2 EVPN-VXLAN service with consistent identifiers. Observe the relevant forwarding/control-plane behavior under the approved test.

B:

“Require all hosts to connect to the same physical access switch” targets a different operation from the reported requirement: “remote tenant hosts in one subnet need bridged reachability over VXLAN”. L2 EVPN couples tenant bridging with distributed MAC reachability and VXLAN transport. Use the appropriate method: Build the MAC-VRF based L2 EVPN-VXLAN service with consistent identifiers. Observe the relevant forwarding/control-plane behavior under the approved test.

D:

“Use only an underlay default route without an L2 overlay service” targets a different operation from the reported requirement: “remote tenant hosts in one subnet need bridged reachability over VXLAN”. L2 EVPN couples tenant bridging with distributed MAC reachability and VXLAN transport. Use the appropriate method: Build the MAC-VRF based L2 EVPN-VXLAN service with consistent identifiers. Observe the relevant forwarding/control-plane behavior under the approved test.

Question 160

In the fictional Harbor-1 east pod, a staged top-of-rack rollout with a bounded maintenance window, the team reports that two tenant Layer 2 segments need extension across a routed IP fabric. The planned change is "Use VXLAN encapsulation between reachable VTEPs." Which post-change observation best validates the intended technical behavior?

  1. Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior.
  2. Check only that the device hostname is listed in the inventory, without examining vxlan data transport behavior.
  3. Use an unrelated tenant dashboard as proof, without verifying the required vxlan data transport condition.
  4. Verify that packet traces show VXLAN encapsulation between the expected VTEPs.

Explanation

Correct Answer

D:

VXLAN carries tenant frames inside outer IP/UDP transport across the routed fabric. The option uses “Verify that packet traces show VXLAN encapsulation between the expected VTEPs” to address “two tenant Layer 2 segments need extension across a routed IP fabric”. The acceptance test is: packet traces show VXLAN encapsulation between the expected VTEPs.

Incorrect Answers

A:

“Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior” targets a different operation from the reported requirement: “two tenant Layer 2 segments need extension across a routed IP fabric”. VXLAN carries tenant frames inside outer IP/UDP transport across the routed fabric. The confirming result is: packet traces show VXLAN encapsulation between the expected VTEPs.

B:

“Check only that the device hostname is listed in the inventory, without examining vxlan data transport behavior” targets a different operation from the reported requirement: “two tenant Layer 2 segments need extension across a routed IP fabric”. VXLAN carries tenant frames inside outer IP/UDP transport across the routed fabric. The confirming result is: packet traces show VXLAN encapsulation between the expected VTEPs.

C:

“Use an unrelated tenant dashboard as proof, without verifying the required vxlan data transport condition” targets a different operation from the reported requirement: “two tenant Layer 2 segments need extension across a routed IP fabric”. VXLAN carries tenant frames inside outer IP/UDP transport across the routed fabric. The confirming result is: packet traces show VXLAN encapsulation between the expected VTEPs.

Nokia Data Center Fabric Fundamentals (4A0-D01) Practice Tests