mcAfee Secure Website
exam =5
exam =6

Exam Code: NS0-165

Exam Name: NetApp Certified Data Administrator, ONTAP

Certification Provider: Network Appliance

Corresponding Certification: NCDA ONTAP

Network Appliance NS0-165 Questions & Answers

Reliable & Actual Study Materials for NS0-165 Exam Success

60 Questions & Answers with Testing Engine

"NS0-165: NetApp Certified Data Administrator, ONTAP" Testing Engine covers all the knowledge points of the real Network Appliance NS0-165 exam.

The latest actual NS0-165 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at NS0-165 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Network Appliance Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Network Appliance NS0-165 Practice Test 38

Question 370

A NetApp ONTAP administrator must resolve this situation: A NAS client disconnects every time one network port is disabled. Select TWO: the targeted corrective action and its strongest verification. (Select TWO.)

  1. Trace actual configured LIF failover targets, broadcast domains and path availability when a node maintenance event causes connectivity loss.
  2. Inspect ONTAP port statistics and fabric counters for drops, errors or saturation before resizing storage systems.
  3. Verify end-to-end MTU support across ONTAP ports, host NICs and intervening switches when using jumbo frames.
  4. Link and VLAN counters normalize and a test client reaches the correct LIF over the intended port.
  5. The LIF has usable failover targets and an end-to-end client test succeeds during controlled port failure.

Explanation

Correct Answers

A:

This is the proposed corrective action for: A NAS client disconnects every time one network port is disabled. The action addresses the ONTAP failure mechanism: Repeatedly moving the LIF without correcting its failover constraints can reproduce the outage on the next event.

E:

This provides separate verification for the same issue: A NAS client disconnects every time one network port is disabled. The outcome tests whether remediation is effective and can be recorded as acceptance evidence.

Incorrect Answers

B:

Inspect ONTAP port statistics and fabric counters for drops, errors or saturation before resizing storage systems. This does not supply the required lif failover path investigation action-and-control pair.

C:

Verify end-to-end MTU support across ONTAP ports, host NICs and intervening switches when using jumbo frames. The paired controls concern lif failover path investigation, not that measure.

D:

Link and VLAN counters normalize and a test client reaches the correct LIF over the intended port. The lif failover path investigation implementation and safeguard are still missing.

Question 371

During a storage operations review for a university research storage team, the team observes: A LIF failover warning says no valid target is available. The decision must maintain shared-client safety and reproducible workloads. What should the storage administrator do first for the stated requirement?

  1. Inspect ONTAP port statistics and fabric counters for drops, errors or saturation before resizing storage systems.
  2. Verify end-to-end MTU support across ONTAP ports, host NICs and intervening switches when using jumbo frames.
  3. Trace actual configured LIF failover targets, broadcast domains and path availability when a node maintenance event causes connectivity loss.
  4. Inspect LIF operational state, current home port, port link state and VLAN tagging before changing storage protocols.

Explanation

Correct Answer

C:

This action addresses the reported ONTAP condition: A LIF failover warning says no valid target is available. It specifically applies lif failover path investigation and mitigates: Repeatedly moving the LIF without correcting its failover constraints can reproduce the outage on the next event. A practical completion check is: The LIF has usable failover targets and an end-to-end client test succeeds during controlled port failure.

Incorrect Answers

A:

Inspect ONTAP port statistics and fabric counters for drops, errors or saturation before resizing storage systems. That change would not implement lif failover path investigation.

B:

Verify end-to-end MTU support across ONTAP ports, host NICs and intervening switches when using jumbo frames. The configuration must instead establish lif failover path investigation.

D:

Inspect LIF operational state, current home port, port link state and VLAN tagging before changing storage protocols. It changes a different feature than lif failover path investigation.

Question 372

After corrective work for the ONTAP issue 'A LIF failover warning says no valid target is available', the operator seeks objective signoff. What observable test should the operator require before closing this issue?

  1. The LIF has usable failover targets and an end-to-end client test succeeds during controlled port failure.
  2. Link and VLAN counters normalize and a test client reaches the correct LIF over the intended port.
  3. Port error counters and effective throughput improve after the offending link or congestion condition is addressed.
  4. A correctly sized test packet and representative storage workload pass without fragmentation-related loss.

Explanation

Correct Answer

A:

This is observable acceptance evidence for: A LIF failover warning says no valid target is available. It demonstrates the intended ONTAP storage behavior in the relevant situation, rather than merely showing that a configuration field exists.

Incorrect Answers

B:

Link and VLAN counters normalize and a test client reaches the correct LIF over the intended port. The lif failover path investigation prerequisite remains unaddressed.

C:

Port error counters and effective throughput improve after the offending link or congestion condition is addressed. It changes a different feature than lif failover path investigation.

D:

A correctly sized test packet and representative storage workload pass without fragmentation-related loss. That change would not implement lif failover path investigation.

Question 373

During a storage operations review for a regional managed storage service provider, the team observes: An interface rehomes to a port that cannot reach the client VLAN. The decision must maintain tenant boundaries and documented service commitments. Which engineering choice most directly solves this problem?

  1. Verify end-to-end MTU support across ONTAP ports, host NICs and intervening switches when using jumbo frames.
  2. Inspect ONTAP port statistics and fabric counters for drops, errors or saturation before resizing storage systems.
  3. Inspect LIF operational state, current home port, port link state and VLAN tagging before changing storage protocols.
  4. Trace actual configured LIF failover targets, broadcast domains and path availability when a node maintenance event causes connectivity loss.

Explanation

Correct Answer

D:

This action addresses the reported ONTAP condition: An interface rehomes to a port that cannot reach the client VLAN. It specifically applies lif failover path investigation and mitigates: Repeatedly moving the LIF without correcting its failover constraints can reproduce the outage on the next event. A practical completion check is: The LIF has usable failover targets and an end-to-end client test succeeds during controlled port failure.

Incorrect Answers

A:

Verify end-to-end MTU support across ONTAP ports, host NICs and intervening switches when using jumbo frames. The lif failover path investigation prerequisite remains unaddressed.

B:

Inspect ONTAP port statistics and fabric counters for drops, errors or saturation before resizing storage systems. It changes a different feature than lif failover path investigation.

C:

Inspect LIF operational state, current home port, port link state and VLAN tagging before changing storage protocols. That change would not implement lif failover path investigation.

Question 374

After corrective work for the ONTAP issue 'An interface rehomes to a port that cannot reach the client VLAN', the operator seeks objective signoff. Which verification is most relevant to the storage problem described?

  1. A correctly sized test packet and representative storage workload pass without fragmentation-related loss.
  2. The LIF has usable failover targets and an end-to-end client test succeeds during controlled port failure.
  3. Link and VLAN counters normalize and a test client reaches the correct LIF over the intended port.
  4. Port error counters and effective throughput improve after the offending link or congestion condition is addressed.

Explanation

Correct Answer

B:

This is observable acceptance evidence for: An interface rehomes to a port that cannot reach the client VLAN. It demonstrates the intended ONTAP storage behavior in the relevant situation, rather than merely showing that a configuration field exists.

Incorrect Answers

A:

A correctly sized test packet and representative storage workload pass without fragmentation-related loss. The relevant success criterion is lif failover path investigation; this measures a different function.

C:

Link and VLAN counters normalize and a test client reaches the correct LIF over the intended port. Acceptance here depends on observing lif failover path investigation, not only that test.

D:

Port error counters and effective throughput improve after the offending link or congestion condition is addressed. It does not establish the requested lif failover path investigation outcome.

Question 375

During a storage operations review for an enterprise disaster recovery review, the team observes: A new network path exists physically but the failover group excludes it. The decision must maintain preservation of recoverable data under controlled change. Which change best corrects the storage design under these conditions?

  1. Inspect LIF operational state, current home port, port link state and VLAN tagging before changing storage protocols.
  2. Trace actual configured LIF failover targets, broadcast domains and path availability when a node maintenance event causes connectivity loss.
  3. Inspect ONTAP port statistics and fabric counters for drops, errors or saturation before resizing storage systems.
  4. Verify end-to-end MTU support across ONTAP ports, host NICs and intervening switches when using jumbo frames.

Explanation

Correct Answer

B:

This action addresses the reported ONTAP condition: A new network path exists physically but the failover group excludes it. It specifically applies lif failover path investigation and mitigates: Repeatedly moving the LIF without correcting its failover constraints can reproduce the outage on the next event. A practical completion check is: The LIF has usable failover targets and an end-to-end client test succeeds during controlled port failure.

Incorrect Answers

A:

Inspect LIF operational state, current home port, port link state and VLAN tagging before changing storage protocols. That change would not implement lif failover path investigation.

C:

Inspect ONTAP port statistics and fabric counters for drops, errors or saturation before resizing storage systems. The lif failover path investigation prerequisite remains unaddressed.

D:

Verify end-to-end MTU support across ONTAP ports, host NICs and intervening switches when using jumbo frames. It changes a different feature than lif failover path investigation.

Question 376

After corrective work for the ONTAP issue 'A new network path exists physically but the failover group excludes it', the operator seeks objective signoff. What evidence would show that the corrective configuration is working?

  1. Link and VLAN counters normalize and a test client reaches the correct LIF over the intended port.
  2. Port error counters and effective throughput improve after the offending link or congestion condition is addressed.
  3. A correctly sized test packet and representative storage workload pass without fragmentation-related loss.
  4. The LIF has usable failover targets and an end-to-end client test succeeds during controlled port failure.

Explanation

Correct Answer

D:

This is observable acceptance evidence for: A new network path exists physically but the failover group excludes it. It demonstrates the intended ONTAP storage behavior in the relevant situation, rather than merely showing that a configuration field exists.

Incorrect Answers

A:

Link and VLAN counters normalize and a test client reaches the correct LIF over the intended port. Acceptance here depends on observing lif failover path investigation, not only that test.

B:

Port error counters and effective throughput improve after the offending link or congestion condition is addressed. It does not establish the requested lif failover path investigation outcome.

C:

A correctly sized test packet and representative storage workload pass without fragmentation-related loss. The relevant success criterion is lif failover path investigation; this measures a different function.

Question 377

During a storage operations review for a regional managed storage service provider, the team observes: Large NFS transfers hang after an MTU change while small metadata requests succeed. The decision must maintain tenant boundaries and documented service commitments. Which ONTAP administration change best addresses the observed failure?

  1. Inspect LIF operational state, current home port, port link state and VLAN tagging before changing storage protocols.
  2. Trace actual configured LIF failover targets, broadcast domains and path availability when a node maintenance event causes connectivity loss.
  3. Inspect ONTAP port statistics and fabric counters for drops, errors or saturation before resizing storage systems.
  4. Verify end-to-end MTU support across ONTAP ports, host NICs and intervening switches when using jumbo frames.

Explanation

Correct Answer

D:

This action addresses the reported ONTAP condition: Large NFS transfers hang after an MTU change while small metadata requests succeed. It specifically applies network mtu and frame handling and mitigates: A partially configured jumbo-frame path can drop large packets even while small pings succeed. A practical completion check is: A correctly sized test packet and representative storage workload pass without fragmentation-related loss.

Incorrect Answers

A:

Inspect LIF operational state, current home port, port link state and VLAN tagging before changing storage protocols. The network mtu and frame handling prerequisite remains unaddressed.

B:

Trace actual configured LIF failover targets, broadcast domains and path availability when a node maintenance event causes connectivity loss. It changes a different feature than network mtu and frame handling.

C:

Inspect ONTAP port statistics and fabric counters for drops, errors or saturation before resizing storage systems. That change would not implement network mtu and frame handling.

Question 378

A NetApp ONTAP change review identifies: Large NFS transfers hang after an MTU change while small metadata requests succeed. Which consequence should the administrator prioritize in this situation?

  1. Misdiagnosing a layer-two fault as an NFS or SMB permission issue delays service restoration.
  2. An overloaded or faulty Ethernet path can look like slow disks when no end-to-end telemetry is gathered.
  3. Repeatedly moving the LIF without correcting its failover constraints can reproduce the outage on the next event.
  4. A partially configured jumbo-frame path can drop large packets even while small pings succeed.

Explanation

Correct Answer

D:

This is the directly implicated exposure when large NFS transfers hang after an MTU change while small metadata requests succeed. The relevant corrective control is: Verify end-to-end MTU support across ONTAP ports, host NICs and intervening switches when using jumbo frames. A meaningful acceptance test is: A correctly sized test packet and representative storage workload pass without fragmentation-related loss.

Incorrect Answers

A:

Misdiagnosing a layer-two fault as an NFS or SMB permission issue delays service restoration. It changes a different feature than network mtu and frame handling.

B:

An overloaded or faulty Ethernet path can look like slow disks when no end-to-end telemetry is gathered. That change would not implement network mtu and frame handling.

C:

Repeatedly moving the LIF without correcting its failover constraints can reproduce the outage on the next event. The configuration must instead establish network mtu and frame handling.

Question 379

During a storage operations review for an enterprise disaster recovery review, the team observes: A switch trunk remains at standard MTU despite jumbo frames on both endpoints. The decision must maintain preservation of recoverable data under controlled change. What should the storage administrator do first for the stated requirement?

  1. Verify end-to-end MTU support across ONTAP ports, host NICs and intervening switches when using jumbo frames.
  2. Inspect ONTAP port statistics and fabric counters for drops, errors or saturation before resizing storage systems.
  3. Inspect LIF operational state, current home port, port link state and VLAN tagging before changing storage protocols.
  4. Trace actual configured LIF failover targets, broadcast domains and path availability when a node maintenance event causes connectivity loss.

Explanation

Correct Answer

A:

This action addresses the reported ONTAP condition: A switch trunk remains at standard MTU despite jumbo frames on both endpoints. It specifically applies network mtu and frame handling and mitigates: A partially configured jumbo-frame path can drop large packets even while small pings succeed. A practical completion check is: A correctly sized test packet and representative storage workload pass without fragmentation-related loss.

Incorrect Answers

B:

Inspect ONTAP port statistics and fabric counters for drops, errors or saturation before resizing storage systems. The configuration must instead establish network mtu and frame handling.

C:

Inspect LIF operational state, current home port, port link state and VLAN tagging before changing storage protocols. The network mtu and frame handling prerequisite remains unaddressed.

D:

Trace actual configured LIF failover targets, broadcast domains and path availability when a node maintenance event causes connectivity loss. It changes a different feature than network mtu and frame handling.

Question 380

A NetApp ONTAP administrator must resolve this situation: A switch trunk remains at standard MTU despite jumbo frames on both endpoints. Which TWO choices form a defensible remediation-and-acceptance pair? (Select TWO.)

  1. The LIF has usable failover targets and an end-to-end client test succeeds during controlled port failure.
  2. Inspect ONTAP port statistics and fabric counters for drops, errors or saturation before resizing storage systems.
  3. Verify end-to-end MTU support across ONTAP ports, host NICs and intervening switches when using jumbo frames.
  4. Inspect LIF operational state, current home port, port link state and VLAN tagging before changing storage protocols.
  5. A correctly sized test packet and representative storage workload pass without fragmentation-related loss.

Explanation

Correct Answers

C:

This is the proposed corrective action for: A switch trunk remains at standard MTU despite jumbo frames on both endpoints. The action addresses the ONTAP failure mechanism: A partially configured jumbo-frame path can drop large packets even while small pings succeed.

E:

This provides separate verification for the same issue: A switch trunk remains at standard MTU despite jumbo frames on both endpoints. The outcome tests whether remediation is effective and can be recorded as acceptance evidence.

Incorrect Answers

A:

The LIF has usable failover targets and an end-to-end client test succeeds during controlled port failure. The paired controls concern network mtu and frame handling, not that measure.

B:

Inspect ONTAP port statistics and fabric counters for drops, errors or saturation before resizing storage systems. The network mtu and frame handling implementation and safeguard are still missing.

D:

Inspect LIF operational state, current home port, port link state and VLAN tagging before changing storage protocols. This does not supply the required network mtu and frame handling action-and-control pair.

NetApp Certified Data Administrator, ONTAP (NS0-165) Practice Tests