mcAfee Secure Website
exam =5
exam =6

Exam Code: NS0-165

Exam Name: NetApp Certified Data Administrator, ONTAP

Certification Provider: Network Appliance

Corresponding Certification: NCDA ONTAP

Network Appliance NS0-165 Questions & Answers

Reliable & Actual Study Materials for NS0-165 Exam Success

60 Questions & Answers with Testing Engine

"NS0-165: NetApp Certified Data Administrator, ONTAP" Testing Engine covers all the knowledge points of the real Network Appliance NS0-165 exam.

The latest actual NS0-165 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at NS0-165 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Network Appliance Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Network Appliance NS0-165 Practice Test 37

Question 360

A NetApp ONTAP administrator must resolve this situation: A routing table contains an overlapping next hop that sends traffic through the wrong tenant network. Which TWO choices form a defensible remediation-and-acceptance pair? (Select TWO.)

  1. Configure required SVM routes and reachable gateways for data LIFs that must communicate beyond their local subnet.
  2. The designated LIF reaches an off-subnet client through the intended gateway without asymmetric routing.
  3. A controlled migration keeps the LIF reachable from its authorized client VLAN using the designated broadcast domain.
  4. Assign a supported LIF service policy that exposes only the intended client or management services for its SVM.
  5. Configure supported IPspaces and SVM assignments when separate tenant networks require overlapping address space or routing isolation.

Explanation

Correct Answers

A:

This is the proposed corrective action for: A routing table contains an overlapping next hop that sends traffic through the wrong tenant network. The action addresses the ONTAP failure mechanism: A correct address and mask cannot reach a remote client when the needed route or next hop is absent.

B:

This provides separate verification for the same issue: A routing table contains an overlapping next hop that sends traffic through the wrong tenant network. The outcome tests whether remediation is effective and can be recorded as acceptance evidence.

Incorrect Answers

C:

A controlled migration keeps the LIF reachable from its authorized client VLAN using the designated broadcast domain. It is not the complementary risk control for svm route and gateway selection.

D:

Assign a supported LIF service policy that exposes only the intended client or management services for its SVM. This does not supply the required svm route and gateway selection action-and-control pair.

E:

Configure supported IPspaces and SVM assignments when separate tenant networks require overlapping address space or routing isolation. The two-part svm route and gateway selection control remains unsatisfied.

Question 361

During a storage operations review for a regional managed storage service provider, the team observes: An SMB service is healthy but no packets reach its LIF after a switch change. The decision must maintain tenant boundaries and documented service commitments. Which ONTAP administration change best addresses the observed failure?

  1. Inspect ONTAP port statistics and fabric counters for drops, errors or saturation before resizing storage systems.
  2. Inspect LIF operational state, current home port, port link state and VLAN tagging before changing storage protocols.
  3. Trace actual configured LIF failover targets, broadcast domains and path availability when a node maintenance event causes connectivity loss.
  4. Verify end-to-end MTU support across ONTAP ports, host NICs and intervening switches when using jumbo frames.

Explanation

Correct Answer

B:

This action addresses the reported ONTAP condition: An SMB service is healthy but no packets reach its LIF after a switch change. It specifically applies lif port and vlan troubleshooting and mitigates: Misdiagnosing a layer-two fault as an NFS or SMB permission issue delays service restoration. A practical completion check is: Link and VLAN counters normalize and a test client reaches the correct LIF over the intended port.

Incorrect Answers

A:

Inspect ONTAP port statistics and fabric counters for drops, errors or saturation before resizing storage systems. The lif port and vlan troubleshooting prerequisite remains unaddressed.

C:

Trace actual configured LIF failover targets, broadcast domains and path availability when a node maintenance event causes connectivity loss. That change would not implement lif port and vlan troubleshooting.

D:

Verify end-to-end MTU support across ONTAP ports, host NICs and intervening switches when using jumbo frames. The configuration must instead establish lif port and vlan troubleshooting.

Question 362

After corrective work for the ONTAP issue 'An SMB service is healthy but no packets reach its LIF after a switch change', the operator seeks objective signoff. Which acceptance result demonstrates that this ONTAP issue has been corrected?

  1. Link and VLAN counters normalize and a test client reaches the correct LIF over the intended port.
  2. Port error counters and effective throughput improve after the offending link or congestion condition is addressed.
  3. The LIF has usable failover targets and an end-to-end client test succeeds during controlled port failure.
  4. A correctly sized test packet and representative storage workload pass without fragmentation-related loss.

Explanation

Correct Answer

A:

This is observable acceptance evidence for: An SMB service is healthy but no packets reach its LIF after a switch change. It demonstrates the intended ONTAP storage behavior in the relevant situation, rather than merely showing that a configuration field exists.

Incorrect Answers

B:

Port error counters and effective throughput improve after the offending link or congestion condition is addressed. That result could pass without demonstrating lif port and vlan troubleshooting.

C:

The LIF has usable failover targets and an end-to-end client test succeeds during controlled port failure. Acceptance here depends on observing lif port and vlan troubleshooting, not only that test.

D:

A correctly sized test packet and representative storage workload pass without fragmentation-related loss. It does not establish the requested lif port and vlan troubleshooting outcome.

Question 363

During a storage operations review for an enterprise disaster recovery review, the team observes: A data LIF fails to return home after an interface group failure. The decision must maintain preservation of recoverable data under controlled change. What should the storage administrator do first for the stated requirement?

  1. Inspect ONTAP port statistics and fabric counters for drops, errors or saturation before resizing storage systems.
  2. Inspect LIF operational state, current home port, port link state and VLAN tagging before changing storage protocols.
  3. Verify end-to-end MTU support across ONTAP ports, host NICs and intervening switches when using jumbo frames.
  4. Trace actual configured LIF failover targets, broadcast domains and path availability when a node maintenance event causes connectivity loss.

Explanation

Correct Answer

B:

This action addresses the reported ONTAP condition: A data LIF fails to return home after an interface group failure. It specifically applies lif port and vlan troubleshooting and mitigates: Misdiagnosing a layer-two fault as an NFS or SMB permission issue delays service restoration. A practical completion check is: Link and VLAN counters normalize and a test client reaches the correct LIF over the intended port.

Incorrect Answers

A:

Inspect ONTAP port statistics and fabric counters for drops, errors or saturation before resizing storage systems. That change would not implement lif port and vlan troubleshooting.

C:

Verify end-to-end MTU support across ONTAP ports, host NICs and intervening switches when using jumbo frames. The lif port and vlan troubleshooting prerequisite remains unaddressed.

D:

Trace actual configured LIF failover targets, broadcast domains and path availability when a node maintenance event causes connectivity loss. It changes a different feature than lif port and vlan troubleshooting.

Question 364

After corrective work for the ONTAP issue 'A data LIF fails to return home after an interface group failure', the operator seeks objective signoff. What observable test should the operator require before closing this issue?

  1. A correctly sized test packet and representative storage workload pass without fragmentation-related loss.
  2. Port error counters and effective throughput improve after the offending link or congestion condition is addressed.
  3. Link and VLAN counters normalize and a test client reaches the correct LIF over the intended port.
  4. The LIF has usable failover targets and an end-to-end client test succeeds during controlled port failure.

Explanation

Correct Answer

C:

This is observable acceptance evidence for: A data LIF fails to return home after an interface group failure. It demonstrates the intended ONTAP storage behavior in the relevant situation, rather than merely showing that a configuration field exists.

Incorrect Answers

A:

A correctly sized test packet and representative storage workload pass without fragmentation-related loss. The configuration must instead establish lif port and vlan troubleshooting.

B:

Port error counters and effective throughput improve after the offending link or congestion condition is addressed. The lif port and vlan troubleshooting prerequisite remains unaddressed.

D:

The LIF has usable failover targets and an end-to-end client test succeeds during controlled port failure. That change would not implement lif port and vlan troubleshooting.

Question 365

During a storage operations review for a regulated healthcare records provider, the team observes: A storage VLAN drops traffic while all SVM services remain online. The decision must maintain patient data and application recovery obligations. Which engineering choice most directly solves this problem?

  1. Inspect ONTAP port statistics and fabric counters for drops, errors or saturation before resizing storage systems.
  2. Inspect LIF operational state, current home port, port link state and VLAN tagging before changing storage protocols.
  3. Trace actual configured LIF failover targets, broadcast domains and path availability when a node maintenance event causes connectivity loss.
  4. Verify end-to-end MTU support across ONTAP ports, host NICs and intervening switches when using jumbo frames.

Explanation

Correct Answer

B:

This action addresses the reported ONTAP condition: A storage VLAN drops traffic while all SVM services remain online. It specifically applies lif port and vlan troubleshooting and mitigates: Misdiagnosing a layer-two fault as an NFS or SMB permission issue delays service restoration. A practical completion check is: Link and VLAN counters normalize and a test client reaches the correct LIF over the intended port.

Incorrect Answers

A:

Inspect ONTAP port statistics and fabric counters for drops, errors or saturation before resizing storage systems. The lif port and vlan troubleshooting prerequisite remains unaddressed.

C:

Trace actual configured LIF failover targets, broadcast domains and path availability when a node maintenance event causes connectivity loss. That change would not implement lif port and vlan troubleshooting.

D:

Verify end-to-end MTU support across ONTAP ports, host NICs and intervening switches when using jumbo frames. The configuration must instead establish lif port and vlan troubleshooting.

Question 366

After corrective work for the ONTAP issue 'A storage VLAN drops traffic while all SVM services remain online', the operator seeks objective signoff. Which verification is most relevant to the storage problem described?

  1. Port error counters and effective throughput improve after the offending link or congestion condition is addressed.
  2. The LIF has usable failover targets and an end-to-end client test succeeds during controlled port failure.
  3. A correctly sized test packet and representative storage workload pass without fragmentation-related loss.
  4. Link and VLAN counters normalize and a test client reaches the correct LIF over the intended port.

Explanation

Correct Answer

D:

This is observable acceptance evidence for: A storage VLAN drops traffic while all SVM services remain online. It demonstrates the intended ONTAP storage behavior in the relevant situation, rather than merely showing that a configuration field exists.

Incorrect Answers

A:

Port error counters and effective throughput improve after the offending link or congestion condition is addressed. The relevant success criterion is lif port and vlan troubleshooting; this measures a different function.

B:

The LIF has usable failover targets and an end-to-end client test succeeds during controlled port failure. That result could pass without demonstrating lif port and vlan troubleshooting.

C:

A correctly sized test packet and representative storage workload pass without fragmentation-related loss. Acceptance here depends on observing lif port and vlan troubleshooting, not only that test.

Question 367

During a storage operations review for a university research storage team, the team observes: A port's administrative state is up but its operational link remains down. The decision must maintain shared-client safety and reproducible workloads. Which change best corrects the storage design under these conditions?

  1. Trace actual configured LIF failover targets, broadcast domains and path availability when a node maintenance event causes connectivity loss.
  2. Verify end-to-end MTU support across ONTAP ports, host NICs and intervening switches when using jumbo frames.
  3. Inspect ONTAP port statistics and fabric counters for drops, errors or saturation before resizing storage systems.
  4. Inspect LIF operational state, current home port, port link state and VLAN tagging before changing storage protocols.

Explanation

Correct Answer

D:

This action addresses the reported ONTAP condition: A port's administrative state is up but its operational link remains down. It specifically applies lif port and vlan troubleshooting and mitigates: Misdiagnosing a layer-two fault as an NFS or SMB permission issue delays service restoration. A practical completion check is: Link and VLAN counters normalize and a test client reaches the correct LIF over the intended port.

Incorrect Answers

A:

Trace actual configured LIF failover targets, broadcast domains and path availability when a node maintenance event causes connectivity loss. That change would not implement lif port and vlan troubleshooting.

B:

Verify end-to-end MTU support across ONTAP ports, host NICs and intervening switches when using jumbo frames. The configuration must instead establish lif port and vlan troubleshooting.

C:

Inspect ONTAP port statistics and fabric counters for drops, errors or saturation before resizing storage systems. The lif port and vlan troubleshooting prerequisite remains unaddressed.

Question 368

A NetApp ONTAP change review identifies: A port's administrative state is up but its operational link remains down. Which unresolved risk most directly follows from the observed condition?

  1. An overloaded or faulty Ethernet path can look like slow disks when no end-to-end telemetry is gathered.
  2. A partially configured jumbo-frame path can drop large packets even while small pings succeed.
  3. Misdiagnosing a layer-two fault as an NFS or SMB permission issue delays service restoration.
  4. Repeatedly moving the LIF without correcting its failover constraints can reproduce the outage on the next event.

Explanation

Correct Answer

C:

This is the directly implicated exposure when a port's administrative state is up but its operational link remains down. The relevant corrective control is: Inspect LIF operational state, current home port, port link state and VLAN tagging before changing storage protocols. A meaningful acceptance test is: Link and VLAN counters normalize and a test client reaches the correct LIF over the intended port.

Incorrect Answers

A:

An overloaded or faulty Ethernet path can look like slow disks when no end-to-end telemetry is gathered. Recurrence here depends on lif port and vlan troubleshooting, not this safeguard.

B:

A partially configured jumbo-frame path can drop large packets even while small pings succeed. That protection can exist while lif port and vlan troubleshooting is still missing.

D:

Repeatedly moving the LIF without correcting its failover constraints can reproduce the outage on the next event. It does not retain the lif port and vlan troubleshooting control over time.

Question 369

During a storage operations review for a regulated healthcare records provider, the team observes: A NAS client disconnects every time one network port is disabled. The decision must maintain patient data and application recovery obligations. Which ONTAP administration change best addresses the observed failure?

  1. Inspect ONTAP port statistics and fabric counters for drops, errors or saturation before resizing storage systems.
  2. Verify end-to-end MTU support across ONTAP ports, host NICs and intervening switches when using jumbo frames.
  3. Inspect LIF operational state, current home port, port link state and VLAN tagging before changing storage protocols.
  4. Trace actual configured LIF failover targets, broadcast domains and path availability when a node maintenance event causes connectivity loss.

Explanation

Correct Answer

D:

This action addresses the reported ONTAP condition: A NAS client disconnects every time one network port is disabled. It specifically applies lif failover path investigation and mitigates: Repeatedly moving the LIF without correcting its failover constraints can reproduce the outage on the next event. A practical completion check is: The LIF has usable failover targets and an end-to-end client test succeeds during controlled port failure.

Incorrect Answers

A:

Inspect ONTAP port statistics and fabric counters for drops, errors or saturation before resizing storage systems. The lif failover path investigation prerequisite remains unaddressed.

B:

Verify end-to-end MTU support across ONTAP ports, host NICs and intervening switches when using jumbo frames. It changes a different feature than lif failover path investigation.

C:

Inspect LIF operational state, current home port, port link state and VLAN tagging before changing storage protocols. That change would not implement lif failover path investigation.

Question 370

A NetApp ONTAP administrator must resolve this situation: A NAS client disconnects every time one network port is disabled. Select TWO: the targeted corrective action and its strongest verification. (Select TWO.)

  1. Trace actual configured LIF failover targets, broadcast domains and path availability when a node maintenance event causes connectivity loss.
  2. Inspect ONTAP port statistics and fabric counters for drops, errors or saturation before resizing storage systems.
  3. Verify end-to-end MTU support across ONTAP ports, host NICs and intervening switches when using jumbo frames.
  4. Link and VLAN counters normalize and a test client reaches the correct LIF over the intended port.
  5. The LIF has usable failover targets and an end-to-end client test succeeds during controlled port failure.

Explanation

Correct Answers

A:

This is the proposed corrective action for: A NAS client disconnects every time one network port is disabled. The action addresses the ONTAP failure mechanism: Repeatedly moving the LIF without correcting its failover constraints can reproduce the outage on the next event.

E:

This provides separate verification for the same issue: A NAS client disconnects every time one network port is disabled. The outcome tests whether remediation is effective and can be recorded as acceptance evidence.

Incorrect Answers

B:

Inspect ONTAP port statistics and fabric counters for drops, errors or saturation before resizing storage systems. This does not supply the required lif failover path investigation action-and-control pair.

C:

Verify end-to-end MTU support across ONTAP ports, host NICs and intervening switches when using jumbo frames. The paired controls concern lif failover path investigation, not that measure.

D:

Link and VLAN counters normalize and a test client reaches the correct LIF over the intended port. The lif failover path investigation implementation and safeguard are still missing.

NetApp Certified Data Administrator, ONTAP (NS0-165) Practice Tests