mcAfee Secure Website
exam =5
exam =6

Exam Code: NS0-165

Exam Name: NetApp Certified Data Administrator, ONTAP

Certification Provider: Network Appliance

Corresponding Certification: NCDA ONTAP

Network Appliance NS0-165 Questions & Answers

Reliable & Actual Study Materials for NS0-165 Exam Success

60 Questions & Answers with Testing Engine

"NS0-165: NetApp Certified Data Administrator, ONTAP" Testing Engine covers all the knowledge points of the real Network Appliance NS0-165 exam.

The latest actual NS0-165 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at NS0-165 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Network Appliance Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Network Appliance NS0-165 Practice Test 36

Question 350

A NetApp ONTAP administrator must resolve this situation: A new data LIF has no valid failover target after a policy change. Select TWO: the targeted corrective action and its strongest verification. (Select TWO.)

  1. Assign a supported LIF service policy that exposes only the intended client or management services for its SVM.
  2. Use ONTAP LIF failover policies and groups to keep NAS interfaces on reachable ports after link or node failure.
  3. A simulated port loss moves the NAS data LIF to a listed eligible target without breaking a client mount.
  4. Build supported interface groups from compatible network ports and switch settings to provide intended bandwidth or link availability.
  5. Two overlapping client addresses reach only their authorized SVM paths through isolated network contexts.

Explanation

Correct Answers

B:

This is the proposed corrective action for: A new data LIF has no valid failover target after a policy change. The action addresses the ONTAP failure mechanism: An LIF cannot maintain access if it has no valid compatible target port in the intended broadcast domain.

C:

This provides separate verification for the same issue: A new data LIF has no valid failover target after a policy change. The outcome tests whether remediation is effective and can be recorded as acceptance evidence.

Incorrect Answers

A:

Assign a supported LIF service policy that exposes only the intended client or management services for its SVM. It is not the complementary risk control for lif failover groups and eligible target ports.

D:

Build supported interface groups from compatible network ports and switch settings to provide intended bandwidth or link availability. The lif failover groups and eligible target ports implementation and safeguard are still missing.

E:

Two overlapping client addresses reach only their authorized SVM paths through isolated network contexts. The two-part lif failover groups and eligible target ports control remains unsatisfied.

Question 351

During a storage operations review for a university research storage team, the team observes: An administrator assumes SAN target LIFs fail over exactly like NAS data LIFs. The decision must maintain shared-client safety and reproducible workloads. Which change best corrects the storage design under these conditions?

  1. Create ONTAP VLAN interfaces and matching switch trunk configuration for the designated storage network segmentation.
  2. Use ONTAP LIF failover policies and groups to keep NAS interfaces on reachable ports after link or node failure.
  3. Configure supported IPspaces and SVM assignments when separate tenant networks require overlapping address space or routing isolation.
  4. Build supported interface groups from compatible network ports and switch settings to provide intended bandwidth or link availability.

Explanation

Correct Answer

B:

This action addresses the reported ONTAP condition: An administrator assumes SAN target LIFs fail over exactly like NAS data LIFs. It specifically applies lif failover groups and eligible target ports and mitigates: An LIF cannot maintain access if it has no valid compatible target port in the intended broadcast domain. A practical completion check is: A simulated port loss moves the NAS data LIF to a listed eligible target without breaking a client mount.

Incorrect Answers

A:

Create ONTAP VLAN interfaces and matching switch trunk configuration for the designated storage network segmentation. That change would not implement lif failover groups and eligible target ports.

C:

Configure supported IPspaces and SVM assignments when separate tenant networks require overlapping address space or routing isolation. The lif failover groups and eligible target ports prerequisite remains unaddressed.

D:

Build supported interface groups from compatible network ports and switch settings to provide intended bandwidth or link availability. It changes a different feature than lif failover groups and eligible target ports.

Question 352

After corrective work for the ONTAP issue 'An administrator assumes SAN target LIFs fail over exactly like NAS data LIFs', the operator seeks objective signoff. What evidence would show that the corrective configuration is working?

  1. Packets traverse the intended tagged VLAN and the test client reaches its assigned data LIF.
  2. Two overlapping client addresses reach only their authorized SVM paths through isolated network contexts.
  3. Member port and switch aggregation states are consistent and traffic survives a planned link failure.
  4. A simulated port loss moves the NAS data LIF to a listed eligible target without breaking a client mount.

Explanation

Correct Answer

D:

This is observable acceptance evidence for: An administrator assumes SAN target LIFs fail over exactly like NAS data LIFs. It demonstrates the intended ONTAP storage behavior in the relevant situation, rather than merely showing that a configuration field exists.

Incorrect Answers

A:

Packets traverse the intended tagged VLAN and the test client reaches its assigned data LIF. Acceptance here depends on observing lif failover groups and eligible target ports, not only that test.

B:

Two overlapping client addresses reach only their authorized SVM paths through isolated network contexts. It does not establish the requested lif failover groups and eligible target ports outcome.

C:

Member port and switch aggregation states are consistent and traffic survives a planned link failure. The relevant success criterion is lif failover groups and eligible target ports; this measures a different function.

Question 353

During a storage operations review for a regulated healthcare records provider, the team observes: Clients on the local subnet can mount storage but a remote subnet times out. The decision must maintain patient data and application recovery obligations. Which ONTAP administration change best addresses the observed failure?

  1. Build supported interface groups from compatible network ports and switch settings to provide intended bandwidth or link availability.
  2. Use ONTAP LIF failover policies and groups to keep NAS interfaces on reachable ports after link or node failure.
  3. Configure required SVM routes and reachable gateways for data LIFs that must communicate beyond their local subnet.
  4. Assign a supported LIF service policy that exposes only the intended client or management services for its SVM.

Explanation

Correct Answer

C:

This action addresses the reported ONTAP condition: Clients on the local subnet can mount storage but a remote subnet times out. It specifically applies svm route and gateway selection and mitigates: A correct address and mask cannot reach a remote client when the needed route or next hop is absent. A practical completion check is: The designated LIF reaches an off-subnet client through the intended gateway without asymmetric routing.

Incorrect Answers

A:

Build supported interface groups from compatible network ports and switch settings to provide intended bandwidth or link availability. The svm route and gateway selection prerequisite remains unaddressed.

B:

Use ONTAP LIF failover policies and groups to keep NAS interfaces on reachable ports after link or node failure. It changes a different feature than svm route and gateway selection.

D:

Assign a supported LIF service policy that exposes only the intended client or management services for its SVM. The configuration must instead establish svm route and gateway selection.

Question 354

After corrective work for the ONTAP issue 'Clients on the local subnet can mount storage but a remote subnet times out', the operator seeks objective signoff. Which acceptance result demonstrates that this ONTAP issue has been corrected?

  1. The interface advertises the expected service policy and a client reaches only the approved service.
  2. Member port and switch aggregation states are consistent and traffic survives a planned link failure.
  3. The designated LIF reaches an off-subnet client through the intended gateway without asymmetric routing.
  4. A simulated port loss moves the NAS data LIF to a listed eligible target without breaking a client mount.

Explanation

Correct Answer

C:

This is observable acceptance evidence for: Clients on the local subnet can mount storage but a remote subnet times out. It demonstrates the intended ONTAP storage behavior in the relevant situation, rather than merely showing that a configuration field exists.

Incorrect Answers

A:

The interface advertises the expected service policy and a client reaches only the approved service. The relevant success criterion is svm route and gateway selection; this measures a different function.

B:

Member port and switch aggregation states are consistent and traffic survives a planned link failure. That result could pass without demonstrating svm route and gateway selection.

D:

A simulated port loss moves the NAS data LIF to a listed eligible target without breaking a client mount. It does not establish the requested svm route and gateway selection outcome.

Question 355

During a storage operations review for a university research storage team, the team observes: A default route points to a gateway on an unrelated VLAN. The decision must maintain shared-client safety and reproducible workloads. What should the storage administrator do first for the stated requirement?

  1. Configure required SVM routes and reachable gateways for data LIFs that must communicate beyond their local subnet.
  2. Create ONTAP VLAN interfaces and matching switch trunk configuration for the designated storage network segmentation.
  3. Group ONTAP Ethernet ports into the correct broadcast domains that reflect actual shared layer-two networks and VLANs.
  4. Configure supported IPspaces and SVM assignments when separate tenant networks require overlapping address space or routing isolation.

Explanation

Correct Answer

A:

This action addresses the reported ONTAP condition: A default route points to a gateway on an unrelated VLAN. It specifically applies svm route and gateway selection and mitigates: A correct address and mask cannot reach a remote client when the needed route or next hop is absent. A practical completion check is: The designated LIF reaches an off-subnet client through the intended gateway without asymmetric routing.

Incorrect Answers

B:

Create ONTAP VLAN interfaces and matching switch trunk configuration for the designated storage network segmentation. The configuration must instead establish svm route and gateway selection.

C:

Group ONTAP Ethernet ports into the correct broadcast domains that reflect actual shared layer-two networks and VLANs. The svm route and gateway selection prerequisite remains unaddressed.

D:

Configure supported IPspaces and SVM assignments when separate tenant networks require overlapping address space or routing isolation. It changes a different feature than svm route and gateway selection.

Question 356

After corrective work for the ONTAP issue 'A default route points to a gateway on an unrelated VLAN', the operator seeks objective signoff. What observable test should the operator require before closing this issue?

  1. The designated LIF reaches an off-subnet client through the intended gateway without asymmetric routing.
  2. A controlled migration keeps the LIF reachable from its authorized client VLAN using the designated broadcast domain.
  3. Two overlapping client addresses reach only their authorized SVM paths through isolated network contexts.
  4. Packets traverse the intended tagged VLAN and the test client reaches its assigned data LIF.

Explanation

Correct Answer

A:

This is observable acceptance evidence for: A default route points to a gateway on an unrelated VLAN. It demonstrates the intended ONTAP storage behavior in the relevant situation, rather than merely showing that a configuration field exists.

Incorrect Answers

B:

A controlled migration keeps the LIF reachable from its authorized client VLAN using the designated broadcast domain. The svm route and gateway selection prerequisite remains unaddressed.

C:

Two overlapping client addresses reach only their authorized SVM paths through isolated network contexts. It changes a different feature than svm route and gateway selection.

D:

Packets traverse the intended tagged VLAN and the test client reaches its assigned data LIF. That change would not implement svm route and gateway selection.

Question 357

During a storage operations review for a regional managed storage service provider, the team observes: An SVM adds a new client network but no corresponding route. The decision must maintain tenant boundaries and documented service commitments. Which engineering choice most directly solves this problem?

  1. Use ONTAP LIF failover policies and groups to keep NAS interfaces on reachable ports after link or node failure.
  2. Assign a supported LIF service policy that exposes only the intended client or management services for its SVM.
  3. Build supported interface groups from compatible network ports and switch settings to provide intended bandwidth or link availability.
  4. Configure required SVM routes and reachable gateways for data LIFs that must communicate beyond their local subnet.

Explanation

Correct Answer

D:

This action addresses the reported ONTAP condition: An SVM adds a new client network but no corresponding route. It specifically applies svm route and gateway selection and mitigates: A correct address and mask cannot reach a remote client when the needed route or next hop is absent. A practical completion check is: The designated LIF reaches an off-subnet client through the intended gateway without asymmetric routing.

Incorrect Answers

A:

Use ONTAP LIF failover policies and groups to keep NAS interfaces on reachable ports after link or node failure. The svm route and gateway selection prerequisite remains unaddressed.

B:

Assign a supported LIF service policy that exposes only the intended client or management services for its SVM. It changes a different feature than svm route and gateway selection.

C:

Build supported interface groups from compatible network ports and switch settings to provide intended bandwidth or link availability. That change would not implement svm route and gateway selection.

Question 358

A NetApp ONTAP change review identifies: An SVM adds a new client network but no corresponding route. What failure mode explains the need for corrective action?

  1. A mismatched LACP configuration can cause intermittent network loss despite two connected cables.
  2. A reachable IP address does not guarantee the interface is allowed to serve NFS, SMB or iSCSI traffic.
  3. An LIF cannot maintain access if it has no valid compatible target port in the intended broadcast domain.
  4. A correct address and mask cannot reach a remote client when the needed route or next hop is absent.

Explanation

Correct Answer

D:

This is the directly implicated exposure when an SVM adds a new client network but no corresponding route. The relevant corrective control is: Configure required SVM routes and reachable gateways for data LIFs that must communicate beyond their local subnet. A meaningful acceptance test is: The designated LIF reaches an off-subnet client through the intended gateway without asymmetric routing.

Incorrect Answers

A:

A mismatched LACP configuration can cause intermittent network loss despite two connected cables. It changes a different feature than svm route and gateway selection.

B:

A reachable IP address does not guarantee the interface is allowed to serve NFS, SMB or iSCSI traffic. That change would not implement svm route and gateway selection.

C:

An LIF cannot maintain access if it has no valid compatible target port in the intended broadcast domain. The configuration must instead establish svm route and gateway selection.

Question 359

During a storage operations review for an enterprise disaster recovery review, the team observes: A routing table contains an overlapping next hop that sends traffic through the wrong tenant network. The decision must maintain preservation of recoverable data under controlled change. Which change best corrects the storage design under these conditions?

  1. Assign a supported LIF service policy that exposes only the intended client or management services for its SVM.
  2. Configure required SVM routes and reachable gateways for data LIFs that must communicate beyond their local subnet.
  3. Group ONTAP Ethernet ports into the correct broadcast domains that reflect actual shared layer-two networks and VLANs.
  4. Configure supported IPspaces and SVM assignments when separate tenant networks require overlapping address space or routing isolation.

Explanation

Correct Answer

B:

This action addresses the reported ONTAP condition: A routing table contains an overlapping next hop that sends traffic through the wrong tenant network. It specifically applies svm route and gateway selection and mitigates: A correct address and mask cannot reach a remote client when the needed route or next hop is absent. A practical completion check is: The designated LIF reaches an off-subnet client through the intended gateway without asymmetric routing.

Incorrect Answers

A:

Assign a supported LIF service policy that exposes only the intended client or management services for its SVM. That change would not implement svm route and gateway selection.

C:

Group ONTAP Ethernet ports into the correct broadcast domains that reflect actual shared layer-two networks and VLANs. The svm route and gateway selection prerequisite remains unaddressed.

D:

Configure supported IPspaces and SVM assignments when separate tenant networks require overlapping address space or routing isolation. It changes a different feature than svm route and gateway selection.

Question 360

A NetApp ONTAP administrator must resolve this situation: A routing table contains an overlapping next hop that sends traffic through the wrong tenant network. Which TWO choices form a defensible remediation-and-acceptance pair? (Select TWO.)

  1. Configure required SVM routes and reachable gateways for data LIFs that must communicate beyond their local subnet.
  2. The designated LIF reaches an off-subnet client through the intended gateway without asymmetric routing.
  3. A controlled migration keeps the LIF reachable from its authorized client VLAN using the designated broadcast domain.
  4. Assign a supported LIF service policy that exposes only the intended client or management services for its SVM.
  5. Configure supported IPspaces and SVM assignments when separate tenant networks require overlapping address space or routing isolation.

Explanation

Correct Answers

A:

This is the proposed corrective action for: A routing table contains an overlapping next hop that sends traffic through the wrong tenant network. The action addresses the ONTAP failure mechanism: A correct address and mask cannot reach a remote client when the needed route or next hop is absent.

B:

This provides separate verification for the same issue: A routing table contains an overlapping next hop that sends traffic through the wrong tenant network. The outcome tests whether remediation is effective and can be recorded as acceptance evidence.

Incorrect Answers

C:

A controlled migration keeps the LIF reachable from its authorized client VLAN using the designated broadcast domain. It is not the complementary risk control for svm route and gateway selection.

D:

Assign a supported LIF service policy that exposes only the intended client or management services for its SVM. This does not supply the required svm route and gateway selection action-and-control pair.

E:

Configure supported IPspaces and SVM assignments when separate tenant networks require overlapping address space or routing isolation. The two-part svm route and gateway selection control remains unsatisfied.

NetApp Certified Data Administrator, ONTAP (NS0-165) Practice Tests