mcAfee Secure Website
exam =5
exam =6

Exam Code: NS0-165

Exam Name: NetApp Certified Data Administrator, ONTAP

Certification Provider: Network Appliance

Corresponding Certification: NCDA ONTAP

Network Appliance NS0-165 Questions & Answers

Reliable & Actual Study Materials for NS0-165 Exam Success

60 Questions & Answers with Testing Engine

"NS0-165: NetApp Certified Data Administrator, ONTAP" Testing Engine covers all the knowledge points of the real Network Appliance NS0-165 exam.

The latest actual NS0-165 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at NS0-165 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Network Appliance Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Network Appliance NS0-165 Practice Test 35

Question 340

A NetApp ONTAP administrator must resolve this situation: A switch trunk omits the required storage VLAN. Which TWO choices form a defensible remediation-and-acceptance pair? (Select TWO.)

  1. Create ONTAP VLAN interfaces and matching switch trunk configuration for the designated storage network segmentation.
  2. Group ONTAP Ethernet ports into the correct broadcast domains that reflect actual shared layer-two networks and VLANs.
  3. The interface advertises the expected service policy and a client reaches only the approved service.
  4. Build supported interface groups from compatible network ports and switch settings to provide intended bandwidth or link availability.
  5. Packets traverse the intended tagged VLAN and the test client reaches its assigned data LIF.

Explanation

Correct Answers

A:

This is the proposed corrective action for: A switch trunk omits the required storage VLAN. The action addresses the ONTAP failure mechanism: A missing or mismatched VLAN tag blocks clients even when the underlying physical port shows link up.

E:

This provides separate verification for the same issue: A switch trunk omits the required storage VLAN. The outcome tests whether remediation is effective and can be recorded as acceptance evidence.

Incorrect Answers

B:

Group ONTAP Ethernet ports into the correct broadcast domains that reflect actual shared layer-two networks and VLANs. The vlan subinterfaces and tagging consistency implementation and safeguard are still missing.

C:

The interface advertises the expected service policy and a client reaches only the approved service. It is not the complementary risk control for vlan subinterfaces and tagging consistency.

D:

Build supported interface groups from compatible network ports and switch settings to provide intended bandwidth or link availability. This does not supply the required vlan subinterfaces and tagging consistency action-and-control pair.

Question 341

During a storage operations review for a regional managed storage service provider, the team observes: An LIF cannot reach its gateway despite the physical interface being healthy. The decision must maintain tenant boundaries and documented service commitments. Which engineering choice most directly solves this problem?

  1. Configure supported IPspaces and SVM assignments when separate tenant networks require overlapping address space or routing isolation.
  2. Create ONTAP VLAN interfaces and matching switch trunk configuration for the designated storage network segmentation.
  3. Configure required SVM routes and reachable gateways for data LIFs that must communicate beyond their local subnet.
  4. Build supported interface groups from compatible network ports and switch settings to provide intended bandwidth or link availability.

Explanation

Correct Answer

B:

This action addresses the reported ONTAP condition: An LIF cannot reach its gateway despite the physical interface being healthy. It specifically applies vlan subinterfaces and tagging consistency and mitigates: A missing or mismatched VLAN tag blocks clients even when the underlying physical port shows link up. A practical completion check is: Packets traverse the intended tagged VLAN and the test client reaches its assigned data LIF.

Incorrect Answers

A:

Configure supported IPspaces and SVM assignments when separate tenant networks require overlapping address space or routing isolation. The vlan subinterfaces and tagging consistency prerequisite remains unaddressed.

C:

Configure required SVM routes and reachable gateways for data LIFs that must communicate beyond their local subnet. That change would not implement vlan subinterfaces and tagging consistency.

D:

Build supported interface groups from compatible network ports and switch settings to provide intended bandwidth or link availability. The configuration must instead establish vlan subinterfaces and tagging consistency.

Question 342

After corrective work for the ONTAP issue 'An LIF cannot reach its gateway despite the physical interface being healthy', the operator seeks objective signoff. Which verification is most relevant to the storage problem described?

  1. The designated LIF reaches an off-subnet client through the intended gateway without asymmetric routing.
  2. Packets traverse the intended tagged VLAN and the test client reaches its assigned data LIF.
  3. Member port and switch aggregation states are consistent and traffic survives a planned link failure.
  4. Two overlapping client addresses reach only their authorized SVM paths through isolated network contexts.

Explanation

Correct Answer

B:

This is observable acceptance evidence for: An LIF cannot reach its gateway despite the physical interface being healthy. It demonstrates the intended ONTAP storage behavior in the relevant situation, rather than merely showing that a configuration field exists.

Incorrect Answers

A:

The designated LIF reaches an off-subnet client through the intended gateway without asymmetric routing. The relevant success criterion is vlan subinterfaces and tagging consistency; this measures a different function.

C:

Member port and switch aggregation states are consistent and traffic survives a planned link failure. Acceptance here depends on observing vlan subinterfaces and tagging consistency, not only that test.

D:

Two overlapping client addresses reach only their authorized SVM paths through isolated network contexts. It does not establish the requested vlan subinterfaces and tagging consistency outcome.

Question 343

During a storage operations review for an enterprise disaster recovery review, the team observes: Two tenants' VLAN identifiers are accidentally swapped in an interface rollout. The decision must maintain preservation of recoverable data under controlled change. Which change best corrects the storage design under these conditions?

  1. Group ONTAP Ethernet ports into the correct broadcast domains that reflect actual shared layer-two networks and VLANs.
  2. Create ONTAP VLAN interfaces and matching switch trunk configuration for the designated storage network segmentation.
  3. Configure supported IPspaces and SVM assignments when separate tenant networks require overlapping address space or routing isolation.
  4. Use ONTAP LIF failover policies and groups to keep NAS interfaces on reachable ports after link or node failure.

Explanation

Correct Answer

B:

This action addresses the reported ONTAP condition: Two tenants' VLAN identifiers are accidentally swapped in an interface rollout. It specifically applies vlan subinterfaces and tagging consistency and mitigates: A missing or mismatched VLAN tag blocks clients even when the underlying physical port shows link up. A practical completion check is: Packets traverse the intended tagged VLAN and the test client reaches its assigned data LIF.

Incorrect Answers

A:

Group ONTAP Ethernet ports into the correct broadcast domains that reflect actual shared layer-two networks and VLANs. That change would not implement vlan subinterfaces and tagging consistency.

C:

Configure supported IPspaces and SVM assignments when separate tenant networks require overlapping address space or routing isolation. The vlan subinterfaces and tagging consistency prerequisite remains unaddressed.

D:

Use ONTAP LIF failover policies and groups to keep NAS interfaces on reachable ports after link or node failure. It changes a different feature than vlan subinterfaces and tagging consistency.

Question 344

After corrective work for the ONTAP issue 'Two tenants' VLAN identifiers are accidentally swapped in an interface rollout', the operator seeks objective signoff. What evidence would show that the corrective configuration is working?

  1. Two overlapping client addresses reach only their authorized SVM paths through isolated network contexts.
  2. A controlled migration keeps the LIF reachable from its authorized client VLAN using the designated broadcast domain.
  3. A simulated port loss moves the NAS data LIF to a listed eligible target without breaking a client mount.
  4. Packets traverse the intended tagged VLAN and the test client reaches its assigned data LIF.

Explanation

Correct Answer

D:

This is observable acceptance evidence for: Two tenants' VLAN identifiers are accidentally swapped in an interface rollout. It demonstrates the intended ONTAP storage behavior in the relevant situation, rather than merely showing that a configuration field exists.

Incorrect Answers

A:

Two overlapping client addresses reach only their authorized SVM paths through isolated network contexts. Acceptance here depends on observing vlan subinterfaces and tagging consistency, not only that test.

B:

A controlled migration keeps the LIF reachable from its authorized client VLAN using the designated broadcast domain. It does not establish the requested vlan subinterfaces and tagging consistency outcome.

C:

A simulated port loss moves the NAS data LIF to a listed eligible target without breaking a client mount. The relevant success criterion is vlan subinterfaces and tagging consistency; this measures a different function.

Question 345

During a storage operations review for a regional managed storage service provider, the team observes: A NAS LIF is restricted to a single failed network port. The decision must maintain tenant boundaries and documented service commitments. Which ONTAP administration change best addresses the observed failure?

  1. Configure supported IPspaces and SVM assignments when separate tenant networks require overlapping address space or routing isolation.
  2. Configure required SVM routes and reachable gateways for data LIFs that must communicate beyond their local subnet.
  3. Assign a supported LIF service policy that exposes only the intended client or management services for its SVM.
  4. Use ONTAP LIF failover policies and groups to keep NAS interfaces on reachable ports after link or node failure.

Explanation

Correct Answer

D:

This action addresses the reported ONTAP condition: A NAS LIF is restricted to a single failed network port. It specifically applies lif failover groups and eligible target ports and mitigates: An LIF cannot maintain access if it has no valid compatible target port in the intended broadcast domain. A practical completion check is: A simulated port loss moves the NAS data LIF to a listed eligible target without breaking a client mount.

Incorrect Answers

A:

Configure supported IPspaces and SVM assignments when separate tenant networks require overlapping address space or routing isolation. The lif failover groups and eligible target ports prerequisite remains unaddressed.

B:

Configure required SVM routes and reachable gateways for data LIFs that must communicate beyond their local subnet. It changes a different feature than lif failover groups and eligible target ports.

C:

Assign a supported LIF service policy that exposes only the intended client or management services for its SVM. That change would not implement lif failover groups and eligible target ports.

Question 346

After corrective work for the ONTAP issue 'A NAS LIF is restricted to a single failed network port', the operator seeks objective signoff. Which acceptance result demonstrates that this ONTAP issue has been corrected?

  1. The designated LIF reaches an off-subnet client through the intended gateway without asymmetric routing.
  2. Two overlapping client addresses reach only their authorized SVM paths through isolated network contexts.
  3. The interface advertises the expected service policy and a client reaches only the approved service.
  4. A simulated port loss moves the NAS data LIF to a listed eligible target without breaking a client mount.

Explanation

Correct Answer

D:

This is observable acceptance evidence for: A NAS LIF is restricted to a single failed network port. It demonstrates the intended ONTAP storage behavior in the relevant situation, rather than merely showing that a configuration field exists.

Incorrect Answers

A:

The designated LIF reaches an off-subnet client through the intended gateway without asymmetric routing. The relevant success criterion is lif failover groups and eligible target ports; this measures a different function.

B:

Two overlapping client addresses reach only their authorized SVM paths through isolated network contexts. That result could pass without demonstrating lif failover groups and eligible target ports.

C:

The interface advertises the expected service policy and a client reaches only the approved service. Acceptance here depends on observing lif failover groups and eligible target ports, not only that test.

Question 347

During a storage operations review for an enterprise disaster recovery review, the team observes: A failover group includes ports on disconnected L2 networks. The decision must maintain preservation of recoverable data under controlled change. What should the storage administrator do first for the stated requirement?

  1. Create ONTAP VLAN interfaces and matching switch trunk configuration for the designated storage network segmentation.
  2. Build supported interface groups from compatible network ports and switch settings to provide intended bandwidth or link availability.
  3. Assign a supported LIF service policy that exposes only the intended client or management services for its SVM.
  4. Use ONTAP LIF failover policies and groups to keep NAS interfaces on reachable ports after link or node failure.

Explanation

Correct Answer

D:

This action addresses the reported ONTAP condition: A failover group includes ports on disconnected L2 networks. It specifically applies lif failover groups and eligible target ports and mitigates: An LIF cannot maintain access if it has no valid compatible target port in the intended broadcast domain. A practical completion check is: A simulated port loss moves the NAS data LIF to a listed eligible target without breaking a client mount.

Incorrect Answers

A:

Create ONTAP VLAN interfaces and matching switch trunk configuration for the designated storage network segmentation. That change would not implement lif failover groups and eligible target ports.

B:

Build supported interface groups from compatible network ports and switch settings to provide intended bandwidth or link availability. The configuration must instead establish lif failover groups and eligible target ports.

C:

Assign a supported LIF service policy that exposes only the intended client or management services for its SVM. The lif failover groups and eligible target ports prerequisite remains unaddressed.

Question 348

A NetApp ONTAP change review identifies: A failover group includes ports on disconnected L2 networks. Which consequence should the administrator prioritize in this situation?

  1. A reachable IP address does not guarantee the interface is allowed to serve NFS, SMB or iSCSI traffic.
  2. A mismatched LACP configuration can cause intermittent network loss despite two connected cables.
  3. A missing or mismatched VLAN tag blocks clients even when the underlying physical port shows link up.
  4. An LIF cannot maintain access if it has no valid compatible target port in the intended broadcast domain.

Explanation

Correct Answer

D:

This is the directly implicated exposure when a failover group includes ports on disconnected L2 networks. The relevant corrective control is: Use ONTAP LIF failover policies and groups to keep NAS interfaces on reachable ports after link or node failure. A meaningful acceptance test is: A simulated port loss moves the NAS data LIF to a listed eligible target without breaking a client mount.

Incorrect Answers

A:

A reachable IP address does not guarantee the interface is allowed to serve NFS, SMB or iSCSI traffic. The configuration must instead establish lif failover groups and eligible target ports.

B:

A mismatched LACP configuration can cause intermittent network loss despite two connected cables. The lif failover groups and eligible target ports prerequisite remains unaddressed.

C:

A missing or mismatched VLAN tag blocks clients even when the underlying physical port shows link up. It changes a different feature than lif failover groups and eligible target ports.

Question 349

During a storage operations review for a regulated healthcare records provider, the team observes: A new data LIF has no valid failover target after a policy change. The decision must maintain patient data and application recovery obligations. Which engineering choice most directly solves this problem?

  1. Build supported interface groups from compatible network ports and switch settings to provide intended bandwidth or link availability.
  2. Use ONTAP LIF failover policies and groups to keep NAS interfaces on reachable ports after link or node failure.
  3. Assign a supported LIF service policy that exposes only the intended client or management services for its SVM.
  4. Configure supported IPspaces and SVM assignments when separate tenant networks require overlapping address space or routing isolation.

Explanation

Correct Answer

B:

This action addresses the reported ONTAP condition: A new data LIF has no valid failover target after a policy change. It specifically applies lif failover groups and eligible target ports and mitigates: An LIF cannot maintain access if it has no valid compatible target port in the intended broadcast domain. A practical completion check is: A simulated port loss moves the NAS data LIF to a listed eligible target without breaking a client mount.

Incorrect Answers

A:

Build supported interface groups from compatible network ports and switch settings to provide intended bandwidth or link availability. The lif failover groups and eligible target ports prerequisite remains unaddressed.

C:

Assign a supported LIF service policy that exposes only the intended client or management services for its SVM. That change would not implement lif failover groups and eligible target ports.

D:

Configure supported IPspaces and SVM assignments when separate tenant networks require overlapping address space or routing isolation. The configuration must instead establish lif failover groups and eligible target ports.

Question 350

A NetApp ONTAP administrator must resolve this situation: A new data LIF has no valid failover target after a policy change. Select TWO: the targeted corrective action and its strongest verification. (Select TWO.)

  1. Assign a supported LIF service policy that exposes only the intended client or management services for its SVM.
  2. Use ONTAP LIF failover policies and groups to keep NAS interfaces on reachable ports after link or node failure.
  3. A simulated port loss moves the NAS data LIF to a listed eligible target without breaking a client mount.
  4. Build supported interface groups from compatible network ports and switch settings to provide intended bandwidth or link availability.
  5. Two overlapping client addresses reach only their authorized SVM paths through isolated network contexts.

Explanation

Correct Answers

B:

This is the proposed corrective action for: A new data LIF has no valid failover target after a policy change. The action addresses the ONTAP failure mechanism: An LIF cannot maintain access if it has no valid compatible target port in the intended broadcast domain.

C:

This provides separate verification for the same issue: A new data LIF has no valid failover target after a policy change. The outcome tests whether remediation is effective and can be recorded as acceptance evidence.

Incorrect Answers

A:

Assign a supported LIF service policy that exposes only the intended client or management services for its SVM. It is not the complementary risk control for lif failover groups and eligible target ports.

D:

Build supported interface groups from compatible network ports and switch settings to provide intended bandwidth or link availability. The lif failover groups and eligible target ports implementation and safeguard are still missing.

E:

Two overlapping client addresses reach only their authorized SVM paths through isolated network contexts. The two-part lif failover groups and eligible target ports control remains unsatisfied.

NetApp Certified Data Administrator, ONTAP (NS0-165) Practice Tests