mcAfee Secure Website
exam =5
exam =6

Exam Code: NS0-165

Exam Name: NetApp Certified Data Administrator, ONTAP

Certification Provider: Network Appliance

Corresponding Certification: NCDA ONTAP

Network Appliance NS0-165 Questions & Answers

Reliable & Actual Study Materials for NS0-165 Exam Success

60 Questions & Answers with Testing Engine

"NS0-165: NetApp Certified Data Administrator, ONTAP" Testing Engine covers all the knowledge points of the real Network Appliance NS0-165 exam.

The latest actual NS0-165 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at NS0-165 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Network Appliance Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Network Appliance NS0-165 Practice Test 34

Question 330

A NetApp ONTAP administrator must resolve this situation: A data LIF uses two physical ports but the switch LACP state is inconsistent. Select TWO: the targeted corrective action and its strongest verification. (Select TWO.)

  1. Configure supported IPspaces and SVM assignments when separate tenant networks require overlapping address space or routing isolation.
  2. Build supported interface groups from compatible network ports and switch settings to provide intended bandwidth or link availability.
  3. Create ONTAP VLAN interfaces and matching switch trunk configuration for the designated storage network segmentation.
  4. Member port and switch aggregation states are consistent and traffic survives a planned link failure.
  5. A simulated port loss moves the NAS data LIF to a listed eligible target without breaking a client mount.

Explanation

Correct Answers

B:

This is the proposed corrective action for: A data LIF uses two physical ports but the switch LACP state is inconsistent. The action addresses the ONTAP failure mechanism: A mismatched LACP configuration can cause intermittent network loss despite two connected cables.

D:

This provides separate verification for the same issue: A data LIF uses two physical ports but the switch LACP state is inconsistent. The outcome tests whether remediation is effective and can be recorded as acceptance evidence.

Incorrect Answers

A:

Configure supported IPspaces and SVM assignments when separate tenant networks require overlapping address space or routing isolation. It is not the complementary risk control for network interface groups and physical redundancy.

C:

Create ONTAP VLAN interfaces and matching switch trunk configuration for the designated storage network segmentation. The paired controls concern network interface groups and physical redundancy, not that measure.

E:

A simulated port loss moves the NAS data LIF to a listed eligible target without breaking a client mount. The two-part network interface groups and physical redundancy control remains unsatisfied.

Question 331

During a storage operations review for an enterprise disaster recovery review, the team observes: An administrator joins ports with incompatible speed or switch settings. The decision must maintain preservation of recoverable data under controlled change. What should the storage administrator do first for the stated requirement?

  1. Use ONTAP LIF failover policies and groups to keep NAS interfaces on reachable ports after link or node failure.
  2. Assign a supported LIF service policy that exposes only the intended client or management services for its SVM.
  3. Group ONTAP Ethernet ports into the correct broadcast domains that reflect actual shared layer-two networks and VLANs.
  4. Build supported interface groups from compatible network ports and switch settings to provide intended bandwidth or link availability.

Explanation

Correct Answer

D:

This action addresses the reported ONTAP condition: An administrator joins ports with incompatible speed or switch settings. It specifically applies network interface groups and physical redundancy and mitigates: A mismatched LACP configuration can cause intermittent network loss despite two connected cables. A practical completion check is: Member port and switch aggregation states are consistent and traffic survives a planned link failure.

Incorrect Answers

A:

Use ONTAP LIF failover policies and groups to keep NAS interfaces on reachable ports after link or node failure. That change would not implement network interface groups and physical redundancy.

B:

Assign a supported LIF service policy that exposes only the intended client or management services for its SVM. The configuration must instead establish network interface groups and physical redundancy.

C:

Group ONTAP Ethernet ports into the correct broadcast domains that reflect actual shared layer-two networks and VLANs. The network interface groups and physical redundancy prerequisite remains unaddressed.

Question 332

After corrective work for the ONTAP issue 'An administrator joins ports with incompatible speed or switch settings', the operator seeks objective signoff. What observable test should the operator require before closing this issue?

  1. The interface advertises the expected service policy and a client reaches only the approved service.
  2. Member port and switch aggregation states are consistent and traffic survives a planned link failure.
  3. A controlled migration keeps the LIF reachable from its authorized client VLAN using the designated broadcast domain.
  4. A simulated port loss moves the NAS data LIF to a listed eligible target without breaking a client mount.

Explanation

Correct Answer

B:

This is observable acceptance evidence for: An administrator joins ports with incompatible speed or switch settings. It demonstrates the intended ONTAP storage behavior in the relevant situation, rather than merely showing that a configuration field exists.

Incorrect Answers

A:

The interface advertises the expected service policy and a client reaches only the approved service. The configuration must instead establish network interface groups and physical redundancy.

C:

A controlled migration keeps the LIF reachable from its authorized client VLAN using the designated broadcast domain. It changes a different feature than network interface groups and physical redundancy.

D:

A simulated port loss moves the NAS data LIF to a listed eligible target without breaking a client mount. That change would not implement network interface groups and physical redundancy.

Question 333

During a storage operations review for a regulated healthcare records provider, the team observes: A redundant uplink loses all traffic when one member fails. The decision must maintain patient data and application recovery obligations. Which engineering choice most directly solves this problem?

  1. Create ONTAP VLAN interfaces and matching switch trunk configuration for the designated storage network segmentation.
  2. Build supported interface groups from compatible network ports and switch settings to provide intended bandwidth or link availability.
  3. Configure required SVM routes and reachable gateways for data LIFs that must communicate beyond their local subnet.
  4. Use ONTAP LIF failover policies and groups to keep NAS interfaces on reachable ports after link or node failure.

Explanation

Correct Answer

B:

This action addresses the reported ONTAP condition: A redundant uplink loses all traffic when one member fails. It specifically applies network interface groups and physical redundancy and mitigates: A mismatched LACP configuration can cause intermittent network loss despite two connected cables. A practical completion check is: Member port and switch aggregation states are consistent and traffic survives a planned link failure.

Incorrect Answers

A:

Create ONTAP VLAN interfaces and matching switch trunk configuration for the designated storage network segmentation. The network interface groups and physical redundancy prerequisite remains unaddressed.

C:

Configure required SVM routes and reachable gateways for data LIFs that must communicate beyond their local subnet. That change would not implement network interface groups and physical redundancy.

D:

Use ONTAP LIF failover policies and groups to keep NAS interfaces on reachable ports after link or node failure. The configuration must instead establish network interface groups and physical redundancy.

Question 334

After corrective work for the ONTAP issue 'A redundant uplink loses all traffic when one member fails', the operator seeks objective signoff. Which verification is most relevant to the storage problem described?

  1. Member port and switch aggregation states are consistent and traffic survives a planned link failure.
  2. Packets traverse the intended tagged VLAN and the test client reaches its assigned data LIF.
  3. A simulated port loss moves the NAS data LIF to a listed eligible target without breaking a client mount.
  4. The designated LIF reaches an off-subnet client through the intended gateway without asymmetric routing.

Explanation

Correct Answer

A:

This is observable acceptance evidence for: A redundant uplink loses all traffic when one member fails. It demonstrates the intended ONTAP storage behavior in the relevant situation, rather than merely showing that a configuration field exists.

Incorrect Answers

B:

Packets traverse the intended tagged VLAN and the test client reaches its assigned data LIF. That result could pass without demonstrating network interface groups and physical redundancy.

C:

A simulated port loss moves the NAS data LIF to a listed eligible target without breaking a client mount. Acceptance here depends on observing network interface groups and physical redundancy, not only that test.

D:

The designated LIF reaches an off-subnet client through the intended gateway without asymmetric routing. It does not establish the requested network interface groups and physical redundancy outcome.

Question 335

During a storage operations review for a university research storage team, the team observes: An ifgrp is configured on ONTAP while the switch still treats its members as independent access ports. The decision must maintain shared-client safety and reproducible workloads. Which change best corrects the storage design under these conditions?

  1. Use ONTAP LIF failover policies and groups to keep NAS interfaces on reachable ports after link or node failure.
  2. Build supported interface groups from compatible network ports and switch settings to provide intended bandwidth or link availability.
  3. Create ONTAP VLAN interfaces and matching switch trunk configuration for the designated storage network segmentation.
  4. Group ONTAP Ethernet ports into the correct broadcast domains that reflect actual shared layer-two networks and VLANs.

Explanation

Correct Answer

B:

This action addresses the reported ONTAP condition: An ifgrp is configured on ONTAP while the switch still treats its members as independent access ports. It specifically applies network interface groups and physical redundancy and mitigates: A mismatched LACP configuration can cause intermittent network loss despite two connected cables. A practical completion check is: Member port and switch aggregation states are consistent and traffic survives a planned link failure.

Incorrect Answers

A:

Use ONTAP LIF failover policies and groups to keep NAS interfaces on reachable ports after link or node failure. That change would not implement network interface groups and physical redundancy.

C:

Create ONTAP VLAN interfaces and matching switch trunk configuration for the designated storage network segmentation. The network interface groups and physical redundancy prerequisite remains unaddressed.

D:

Group ONTAP Ethernet ports into the correct broadcast domains that reflect actual shared layer-two networks and VLANs. It changes a different feature than network interface groups and physical redundancy.

Question 336

After corrective work for the ONTAP issue 'An ifgrp is configured on ONTAP while the switch still treats its members as independent access ports', the operator seeks objective signoff. What evidence would show that the corrective configuration is working?

  1. A controlled migration keeps the LIF reachable from its authorized client VLAN using the designated broadcast domain.
  2. Member port and switch aggregation states are consistent and traffic survives a planned link failure.
  3. Packets traverse the intended tagged VLAN and the test client reaches its assigned data LIF.
  4. A simulated port loss moves the NAS data LIF to a listed eligible target without breaking a client mount.

Explanation

Correct Answer

B:

This is observable acceptance evidence for: An ifgrp is configured on ONTAP while the switch still treats its members as independent access ports. It demonstrates the intended ONTAP storage behavior in the relevant situation, rather than merely showing that a configuration field exists.

Incorrect Answers

A:

A controlled migration keeps the LIF reachable from its authorized client VLAN using the designated broadcast domain. Acceptance here depends on observing network interface groups and physical redundancy, not only that test.

C:

Packets traverse the intended tagged VLAN and the test client reaches its assigned data LIF. The relevant success criterion is network interface groups and physical redundancy; this measures a different function.

D:

A simulated port loss moves the NAS data LIF to a listed eligible target without breaking a client mount. That result could pass without demonstrating network interface groups and physical redundancy.

Question 337

During a storage operations review for a regulated healthcare records provider, the team observes: A client subnet was migrated to VLAN 230 but its ONTAP interface still uses the untagged port. The decision must maintain patient data and application recovery obligations. Which ONTAP administration change best addresses the observed failure?

  1. Group ONTAP Ethernet ports into the correct broadcast domains that reflect actual shared layer-two networks and VLANs.
  2. Create ONTAP VLAN interfaces and matching switch trunk configuration for the designated storage network segmentation.
  3. Configure required SVM routes and reachable gateways for data LIFs that must communicate beyond their local subnet.
  4. Use ONTAP LIF failover policies and groups to keep NAS interfaces on reachable ports after link or node failure.

Explanation

Correct Answer

B:

This action addresses the reported ONTAP condition: A client subnet was migrated to VLAN 230 but its ONTAP interface still uses the untagged port. It specifically applies vlan subinterfaces and tagging consistency and mitigates: A missing or mismatched VLAN tag blocks clients even when the underlying physical port shows link up. A practical completion check is: Packets traverse the intended tagged VLAN and the test client reaches its assigned data LIF.

Incorrect Answers

A:

Group ONTAP Ethernet ports into the correct broadcast domains that reflect actual shared layer-two networks and VLANs. The vlan subinterfaces and tagging consistency prerequisite remains unaddressed.

C:

Configure required SVM routes and reachable gateways for data LIFs that must communicate beyond their local subnet. That change would not implement vlan subinterfaces and tagging consistency.

D:

Use ONTAP LIF failover policies and groups to keep NAS interfaces on reachable ports after link or node failure. The configuration must instead establish vlan subinterfaces and tagging consistency.

Question 338

A NetApp ONTAP change review identifies: A client subnet was migrated to VLAN 230 but its ONTAP interface still uses the untagged port. Which unresolved risk most directly follows from the observed condition?

  1. A data LIF that migrates to a port in the wrong broadcast domain may lose connectivity even though the port is up.
  2. A correct address and mask cannot reach a remote client when the needed route or next hop is absent.
  3. An LIF cannot maintain access if it has no valid compatible target port in the intended broadcast domain.
  4. A missing or mismatched VLAN tag blocks clients even when the underlying physical port shows link up.

Explanation

Correct Answer

D:

This is the directly implicated exposure when a client subnet was migrated to VLAN 230 but its ONTAP interface still uses the untagged port. The relevant corrective control is: Create ONTAP VLAN interfaces and matching switch trunk configuration for the designated storage network segmentation. A meaningful acceptance test is: Packets traverse the intended tagged VLAN and the test client reaches its assigned data LIF.

Incorrect Answers

A:

A data LIF that migrates to a port in the wrong broadcast domain may lose connectivity even though the port is up. It protects a different risk than the vlan subinterfaces and tagging consistency requirement.

B:

A correct address and mask cannot reach a remote client when the needed route or next hop is absent. It does not retain the vlan subinterfaces and tagging consistency control over time.

C:

An LIF cannot maintain access if it has no valid compatible target port in the intended broadcast domain. Recurrence here depends on vlan subinterfaces and tagging consistency, not this safeguard.

Question 339

During a storage operations review for a university research storage team, the team observes: A switch trunk omits the required storage VLAN. The decision must maintain shared-client safety and reproducible workloads. What should the storage administrator do first for the stated requirement?

  1. Build supported interface groups from compatible network ports and switch settings to provide intended bandwidth or link availability.
  2. Assign a supported LIF service policy that exposes only the intended client or management services for its SVM.
  3. Group ONTAP Ethernet ports into the correct broadcast domains that reflect actual shared layer-two networks and VLANs.
  4. Create ONTAP VLAN interfaces and matching switch trunk configuration for the designated storage network segmentation.

Explanation

Correct Answer

D:

This action addresses the reported ONTAP condition: A switch trunk omits the required storage VLAN. It specifically applies vlan subinterfaces and tagging consistency and mitigates: A missing or mismatched VLAN tag blocks clients even when the underlying physical port shows link up. A practical completion check is: Packets traverse the intended tagged VLAN and the test client reaches its assigned data LIF.

Incorrect Answers

A:

Build supported interface groups from compatible network ports and switch settings to provide intended bandwidth or link availability. That change would not implement vlan subinterfaces and tagging consistency.

B:

Assign a supported LIF service policy that exposes only the intended client or management services for its SVM. The configuration must instead establish vlan subinterfaces and tagging consistency.

C:

Group ONTAP Ethernet ports into the correct broadcast domains that reflect actual shared layer-two networks and VLANs. The vlan subinterfaces and tagging consistency prerequisite remains unaddressed.

Question 340

A NetApp ONTAP administrator must resolve this situation: A switch trunk omits the required storage VLAN. Which TWO choices form a defensible remediation-and-acceptance pair? (Select TWO.)

  1. Create ONTAP VLAN interfaces and matching switch trunk configuration for the designated storage network segmentation.
  2. Group ONTAP Ethernet ports into the correct broadcast domains that reflect actual shared layer-two networks and VLANs.
  3. The interface advertises the expected service policy and a client reaches only the approved service.
  4. Build supported interface groups from compatible network ports and switch settings to provide intended bandwidth or link availability.
  5. Packets traverse the intended tagged VLAN and the test client reaches its assigned data LIF.

Explanation

Correct Answers

A:

This is the proposed corrective action for: A switch trunk omits the required storage VLAN. The action addresses the ONTAP failure mechanism: A missing or mismatched VLAN tag blocks clients even when the underlying physical port shows link up.

E:

This provides separate verification for the same issue: A switch trunk omits the required storage VLAN. The outcome tests whether remediation is effective and can be recorded as acceptance evidence.

Incorrect Answers

B:

Group ONTAP Ethernet ports into the correct broadcast domains that reflect actual shared layer-two networks and VLANs. The vlan subinterfaces and tagging consistency implementation and safeguard are still missing.

C:

The interface advertises the expected service policy and a client reaches only the approved service. It is not the complementary risk control for vlan subinterfaces and tagging consistency.

D:

Build supported interface groups from compatible network ports and switch settings to provide intended bandwidth or link availability. This does not supply the required vlan subinterfaces and tagging consistency action-and-control pair.

NetApp Certified Data Administrator, ONTAP (NS0-165) Practice Tests