mcAfee Secure Website
exam =5
exam =6

Exam Code: NS0-165

Exam Name: NetApp Certified Data Administrator, ONTAP

Certification Provider: Network Appliance

Corresponding Certification: NCDA ONTAP

Network Appliance NS0-165 Questions & Answers

Reliable & Actual Study Materials for NS0-165 Exam Success

60 Questions & Answers with Testing Engine

"NS0-165: NetApp Certified Data Administrator, ONTAP" Testing Engine covers all the knowledge points of the real Network Appliance NS0-165 exam.

The latest actual NS0-165 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at NS0-165 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Network Appliance Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Network Appliance NS0-165 Practice Test 33

Question 320

A NetApp ONTAP administrator must resolve this situation: A new VLAN is configured on the switch but the ONTAP port grouping is not reviewed. Which TWO choices form a defensible remediation-and-acceptance pair? (Select TWO.)

  1. Packets traverse the intended tagged VLAN and the test client reaches its assigned data LIF.
  2. Use ONTAP LIF failover policies and groups to keep NAS interfaces on reachable ports after link or node failure.
  3. Group ONTAP Ethernet ports into the correct broadcast domains that reflect actual shared layer-two networks and VLANs.
  4. A controlled migration keeps the LIF reachable from its authorized client VLAN using the designated broadcast domain.
  5. Build supported interface groups from compatible network ports and switch settings to provide intended bandwidth or link availability.

Explanation

Correct Answers

C:

This is the proposed corrective action for: A new VLAN is configured on the switch but the ONTAP port grouping is not reviewed. The action addresses the ONTAP failure mechanism: A data LIF that migrates to a port in the wrong broadcast domain may lose connectivity even though the port is up.

D:

This provides separate verification for the same issue: A new VLAN is configured on the switch but the ONTAP port grouping is not reviewed. The outcome tests whether remediation is effective and can be recorded as acceptance evidence.

Incorrect Answers

A:

Packets traverse the intended tagged VLAN and the test client reaches its assigned data LIF. The paired controls concern broadcast domain and layer-two reachability, not that measure.

B:

Use ONTAP LIF failover policies and groups to keep NAS interfaces on reachable ports after link or node failure. The broadcast domain and layer-two reachability implementation and safeguard are still missing.

E:

Build supported interface groups from compatible network ports and switch settings to provide intended bandwidth or link availability. The two-part broadcast domain and layer-two reachability control remains unsatisfied.

Question 321

During a storage operations review for a regulated healthcare records provider, the team observes: Two customers both use the same RFC1918 subnet on different tenant networks. The decision must maintain patient data and application recovery obligations. Which ONTAP administration change best addresses the observed failure?

  1. Build supported interface groups from compatible network ports and switch settings to provide intended bandwidth or link availability.
  2. Configure supported IPspaces and SVM assignments when separate tenant networks require overlapping address space or routing isolation.
  3. Assign a supported LIF service policy that exposes only the intended client or management services for its SVM.
  4. Configure required SVM routes and reachable gateways for data LIFs that must communicate beyond their local subnet.

Explanation

Correct Answer

B:

This action addresses the reported ONTAP condition: Two customers both use the same RFC1918 subnet on different tenant networks. It specifically applies ipspace isolation for overlapping networks and mitigates: Using one shared IPspace for tenants with conflicting subnets can produce ambiguous route and access behavior. A practical completion check is: Two overlapping client addresses reach only their authorized SVM paths through isolated network contexts.

Incorrect Answers

A:

Build supported interface groups from compatible network ports and switch settings to provide intended bandwidth or link availability. The ipspace isolation for overlapping networks prerequisite remains unaddressed.

C:

Assign a supported LIF service policy that exposes only the intended client or management services for its SVM. That change would not implement ipspace isolation for overlapping networks.

D:

Configure required SVM routes and reachable gateways for data LIFs that must communicate beyond their local subnet. The configuration must instead establish ipspace isolation for overlapping networks.

Question 322

After corrective work for the ONTAP issue 'Two customers both use the same RFC1918 subnet on different tenant networks', the operator seeks objective signoff. Which acceptance result demonstrates that this ONTAP issue has been corrected?

  1. The designated LIF reaches an off-subnet client through the intended gateway without asymmetric routing.
  2. The interface advertises the expected service policy and a client reaches only the approved service.
  3. Member port and switch aggregation states are consistent and traffic survives a planned link failure.
  4. Two overlapping client addresses reach only their authorized SVM paths through isolated network contexts.

Explanation

Correct Answer

D:

This is observable acceptance evidence for: Two customers both use the same RFC1918 subnet on different tenant networks. It demonstrates the intended ONTAP storage behavior in the relevant situation, rather than merely showing that a configuration field exists.

Incorrect Answers

A:

The designated LIF reaches an off-subnet client through the intended gateway without asymmetric routing. The relevant success criterion is ipspace isolation for overlapping networks; this measures a different function.

B:

The interface advertises the expected service policy and a client reaches only the approved service. That result could pass without demonstrating ipspace isolation for overlapping networks.

C:

Member port and switch aggregation states are consistent and traffic survives a planned link failure. Acceptance here depends on observing ipspace isolation for overlapping networks, not only that test.

Question 323

During a storage operations review for a university research storage team, the team observes: An operator creates a route on the wrong IPspace. The decision must maintain shared-client safety and reproducible workloads. What should the storage administrator do first for the stated requirement?

  1. Configure required SVM routes and reachable gateways for data LIFs that must communicate beyond their local subnet.
  2. Build supported interface groups from compatible network ports and switch settings to provide intended bandwidth or link availability.
  3. Assign a supported LIF service policy that exposes only the intended client or management services for its SVM.
  4. Configure supported IPspaces and SVM assignments when separate tenant networks require overlapping address space or routing isolation.

Explanation

Correct Answer

D:

This action addresses the reported ONTAP condition: An operator creates a route on the wrong IPspace. It specifically applies ipspace isolation for overlapping networks and mitigates: Using one shared IPspace for tenants with conflicting subnets can produce ambiguous route and access behavior. A practical completion check is: Two overlapping client addresses reach only their authorized SVM paths through isolated network contexts.

Incorrect Answers

A:

Configure required SVM routes and reachable gateways for data LIFs that must communicate beyond their local subnet. That change would not implement ipspace isolation for overlapping networks.

B:

Build supported interface groups from compatible network ports and switch settings to provide intended bandwidth or link availability. The configuration must instead establish ipspace isolation for overlapping networks.

C:

Assign a supported LIF service policy that exposes only the intended client or management services for its SVM. The ipspace isolation for overlapping networks prerequisite remains unaddressed.

Question 324

After corrective work for the ONTAP issue 'An operator creates a route on the wrong IPspace', the operator seeks objective signoff. What observable test should the operator require before closing this issue?

  1. Member port and switch aggregation states are consistent and traffic survives a planned link failure.
  2. The interface advertises the expected service policy and a client reaches only the approved service.
  3. Two overlapping client addresses reach only their authorized SVM paths through isolated network contexts.
  4. The designated LIF reaches an off-subnet client through the intended gateway without asymmetric routing.

Explanation

Correct Answer

C:

This is observable acceptance evidence for: An operator creates a route on the wrong IPspace. It demonstrates the intended ONTAP storage behavior in the relevant situation, rather than merely showing that a configuration field exists.

Incorrect Answers

A:

Member port and switch aggregation states are consistent and traffic survives a planned link failure. The configuration must instead establish ipspace isolation for overlapping networks.

B:

The interface advertises the expected service policy and a client reaches only the approved service. The ipspace isolation for overlapping networks prerequisite remains unaddressed.

D:

The designated LIF reaches an off-subnet client through the intended gateway without asymmetric routing. That change would not implement ipspace isolation for overlapping networks.

Question 325

During a storage operations review for a regional managed storage service provider, the team observes: A new SVM is bound to the default IPspace despite an isolated tenant plan. The decision must maintain tenant boundaries and documented service commitments. Which engineering choice most directly solves this problem?

  1. Configure required SVM routes and reachable gateways for data LIFs that must communicate beyond their local subnet.
  2. Configure supported IPspaces and SVM assignments when separate tenant networks require overlapping address space or routing isolation.
  3. Group ONTAP Ethernet ports into the correct broadcast domains that reflect actual shared layer-two networks and VLANs.
  4. Assign a supported LIF service policy that exposes only the intended client or management services for its SVM.

Explanation

Correct Answer

B:

This action addresses the reported ONTAP condition: A new SVM is bound to the default IPspace despite an isolated tenant plan. It specifically applies ipspace isolation for overlapping networks and mitigates: Using one shared IPspace for tenants with conflicting subnets can produce ambiguous route and access behavior. A practical completion check is: Two overlapping client addresses reach only their authorized SVM paths through isolated network contexts.

Incorrect Answers

A:

Configure required SVM routes and reachable gateways for data LIFs that must communicate beyond their local subnet. It could look normal while ipspace isolation for overlapping networks remains unexplained.

C:

Group ONTAP Ethernet ports into the correct broadcast domains that reflect actual shared layer-two networks and VLANs. That evidence would not isolate ipspace isolation for overlapping networks.

D:

Assign a supported LIF service policy that exposes only the intended client or management services for its SVM. The decisive diagnostic evidence must instead cover ipspace isolation for overlapping networks.

Question 326

After corrective work for the ONTAP issue 'A new SVM is bound to the default IPspace despite an isolated tenant plan', the operator seeks objective signoff. Which verification is most relevant to the storage problem described?

  1. The designated LIF reaches an off-subnet client through the intended gateway without asymmetric routing.
  2. The interface advertises the expected service policy and a client reaches only the approved service.
  3. A controlled migration keeps the LIF reachable from its authorized client VLAN using the designated broadcast domain.
  4. Two overlapping client addresses reach only their authorized SVM paths through isolated network contexts.

Explanation

Correct Answer

D:

This is observable acceptance evidence for: A new SVM is bound to the default IPspace despite an isolated tenant plan. It demonstrates the intended ONTAP storage behavior in the relevant situation, rather than merely showing that a configuration field exists.

Incorrect Answers

A:

The designated LIF reaches an off-subnet client through the intended gateway without asymmetric routing. The relevant success criterion is ipspace isolation for overlapping networks; this measures a different function.

B:

The interface advertises the expected service policy and a client reaches only the approved service. That result could pass without demonstrating ipspace isolation for overlapping networks.

C:

A controlled migration keeps the LIF reachable from its authorized client VLAN using the designated broadcast domain. Acceptance here depends on observing ipspace isolation for overlapping networks, not only that test.

Question 327

During a storage operations review for an enterprise disaster recovery review, the team observes: An administrator assumes VLAN tagging alone defines every required routing separation. The decision must maintain preservation of recoverable data under controlled change. Which change best corrects the storage design under these conditions?

  1. Configure required SVM routes and reachable gateways for data LIFs that must communicate beyond their local subnet.
  2. Configure supported IPspaces and SVM assignments when separate tenant networks require overlapping address space or routing isolation.
  3. Assign a supported LIF service policy that exposes only the intended client or management services for its SVM.
  4. Build supported interface groups from compatible network ports and switch settings to provide intended bandwidth or link availability.

Explanation

Correct Answer

B:

This action addresses the reported ONTAP condition: An administrator assumes VLAN tagging alone defines every required routing separation. It specifically applies ipspace isolation for overlapping networks and mitigates: Using one shared IPspace for tenants with conflicting subnets can produce ambiguous route and access behavior. A practical completion check is: Two overlapping client addresses reach only their authorized SVM paths through isolated network contexts.

Incorrect Answers

A:

Configure required SVM routes and reachable gateways for data LIFs that must communicate beyond their local subnet. That describes Svm route and gateway selection, not ipspace isolation for overlapping networks.

C:

Assign a supported LIF service policy that exposes only the intended client or management services for its SVM. The definition of ipspace isolation for overlapping networks is not established by this choice.

D:

Build supported interface groups from compatible network ports and switch settings to provide intended bandwidth or link availability. This category is separate from ipspace isolation for overlapping networks.

Question 328

A NetApp ONTAP change review identifies: An administrator assumes VLAN tagging alone defines every required routing separation. What failure mode explains the need for corrective action?

  1. Using one shared IPspace for tenants with conflicting subnets can produce ambiguous route and access behavior.
  2. A reachable IP address does not guarantee the interface is allowed to serve NFS, SMB or iSCSI traffic.
  3. A correct address and mask cannot reach a remote client when the needed route or next hop is absent.
  4. A mismatched LACP configuration can cause intermittent network loss despite two connected cables.

Explanation

Correct Answer

A:

This is the directly implicated exposure when an administrator assumes VLAN tagging alone defines every required routing separation. The relevant corrective control is: Configure supported IPspaces and SVM assignments when separate tenant networks require overlapping address space or routing isolation. A meaningful acceptance test is: Two overlapping client addresses reach only their authorized SVM paths through isolated network contexts.

Incorrect Answers

B:

A reachable IP address does not guarantee the interface is allowed to serve NFS, SMB or iSCSI traffic. The definition of ipspace isolation for overlapping networks is not established by this choice.

C:

A correct address and mask cannot reach a remote client when the needed route or next hop is absent. This category is separate from ipspace isolation for overlapping networks.

D:

A mismatched LACP configuration can cause intermittent network loss despite two connected cables. That describes Network interface groups and physical redundancy, not ipspace isolation for overlapping networks.

Question 329

During a storage operations review for a regional managed storage service provider, the team observes: A data LIF uses two physical ports but the switch LACP state is inconsistent. The decision must maintain tenant boundaries and documented service commitments. Which ONTAP administration change best addresses the observed failure?

  1. Build supported interface groups from compatible network ports and switch settings to provide intended bandwidth or link availability.
  2. Create ONTAP VLAN interfaces and matching switch trunk configuration for the designated storage network segmentation.
  3. Configure supported IPspaces and SVM assignments when separate tenant networks require overlapping address space or routing isolation.
  4. Use ONTAP LIF failover policies and groups to keep NAS interfaces on reachable ports after link or node failure.

Explanation

Correct Answer

A:

This action addresses the reported ONTAP condition: A data LIF uses two physical ports but the switch LACP state is inconsistent. It specifically applies network interface groups and physical redundancy and mitigates: A mismatched LACP configuration can cause intermittent network loss despite two connected cables. A practical completion check is: Member port and switch aggregation states are consistent and traffic survives a planned link failure.

Incorrect Answers

B:

Create ONTAP VLAN interfaces and matching switch trunk configuration for the designated storage network segmentation. It changes a different feature than network interface groups and physical redundancy.

C:

Configure supported IPspaces and SVM assignments when separate tenant networks require overlapping address space or routing isolation. That change would not implement network interface groups and physical redundancy.

D:

Use ONTAP LIF failover policies and groups to keep NAS interfaces on reachable ports after link or node failure. The configuration must instead establish network interface groups and physical redundancy.

Question 330

A NetApp ONTAP administrator must resolve this situation: A data LIF uses two physical ports but the switch LACP state is inconsistent. Select TWO: the targeted corrective action and its strongest verification. (Select TWO.)

  1. Configure supported IPspaces and SVM assignments when separate tenant networks require overlapping address space or routing isolation.
  2. Build supported interface groups from compatible network ports and switch settings to provide intended bandwidth or link availability.
  3. Create ONTAP VLAN interfaces and matching switch trunk configuration for the designated storage network segmentation.
  4. Member port and switch aggregation states are consistent and traffic survives a planned link failure.
  5. A simulated port loss moves the NAS data LIF to a listed eligible target without breaking a client mount.

Explanation

Correct Answers

B:

This is the proposed corrective action for: A data LIF uses two physical ports but the switch LACP state is inconsistent. The action addresses the ONTAP failure mechanism: A mismatched LACP configuration can cause intermittent network loss despite two connected cables.

D:

This provides separate verification for the same issue: A data LIF uses two physical ports but the switch LACP state is inconsistent. The outcome tests whether remediation is effective and can be recorded as acceptance evidence.

Incorrect Answers

A:

Configure supported IPspaces and SVM assignments when separate tenant networks require overlapping address space or routing isolation. It is not the complementary risk control for network interface groups and physical redundancy.

C:

Create ONTAP VLAN interfaces and matching switch trunk configuration for the designated storage network segmentation. The paired controls concern network interface groups and physical redundancy, not that measure.

E:

A simulated port loss moves the NAS data LIF to a listed eligible target without breaking a client mount. The two-part network interface groups and physical redundancy control remains unsatisfied.

NetApp Certified Data Administrator, ONTAP (NS0-165) Practice Tests