mcAfee Secure Website
exam =5
exam =6

Exam Code: JN0-650

Exam Name: Enterprise Routing and Switching, Professional (JNCIP-ENT)

Certification Provider: Juniper

Corresponding Certification: JNCIP-ENT

Juniper JN0-650 Questions & Answers

Reliable & Actual Study Materials for JN0-650 Exam Success

107 Questions & Answers with Testing Engine

"JN0-650: Enterprise Routing and Switching, Professional (JNCIP-ENT)" Testing Engine covers all the knowledge points of the real Juniper JN0-650 exam.

The latest actual JN0-650 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at JN0-650 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Juniper Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Juniper JN0-650 Practice Test 63

Question 620

At a campus distributing IP video to several buildings, a Junos specialist investigates this scenario: An upstream multicast router receives no distribution request even though a downstream receiver requires the stream. The group traffic must reach interested receivers without flooding other locations. Which technical mechanism most directly explains the symptom?

  1. Any-source multicast allows receivers to request a group independent of a specific source, typically using a shared-tree mechanism.
  2. PIM and multicast routing policy can be applied to limit permitted source and group reachability.
  3. Shared-tree (*,G) state expresses interest in traffic to group G from potentially multiple sources.
  4. PIM sparse mode builds multicast forwarding paths in response to explicit joins rather than flooding everywhere.

Explanation

Correct Answer

D:

For a campus distributing IP video to several buildings, the governing mechanism is: PIM sparse mode builds multicast forwarding paths in response to explicit joins rather than flooding everywhere. It explains the reported symptom: An upstream multicast router receives no distribution request even though a downstream receiver requires the stream. The intended response is: Enable compatible sparse-mode PIM and verify receiver-driven upstream join signaling. Verification: show pim join reports an expected entry and packets follow the joined multicast branch.

Incorrect Answers

A:

Any-source multicast allows receivers to request a group independent of a specific source, typically using a shared-tree mechanism. This alternative mechanism does not match the current fault.

B:

PIM and multicast routing policy can be applied to limit permitted source and group reachability. Fixing that different mechanism would not address the current root cause: PIM sparse mode builds multicast forwarding paths in response to explicit joins rather than flooding everywhere.

C:

Shared-tree (*,G) state expresses interest in traffic to group G from potentially multiple sources. Its verification is distinct from the reported condition: An upstream multicast router receives no distribution request even though a downstream receiver requires the stream. The group traffic must reach interested receivers without flooding other locations.

Question 621

At a provider Ethernet network carrying customer Layer 2 services, a Junos specialist investigates this scenario: Customer spanning-tree BPDUs must traverse a provider Layer 2 network without controlling the provider's own spanning tree. The service must preserve tags without bridging unrelated tenants. What protocol behavior accounts for this failure?

  1. Layer 2 protocol tunneling can transport specified customer control frames across a separate provider bridging domain.
  2. MSTP region membership depends on compatible region name, revision and VLAN-to-instance mapping digest.
  3. Junos enhanced Layer 2 switching uses family ethernet-switching configuration on eligible logical interfaces.
  4. An Ethernet trunk carries selected tagged VLANs and membership must include every allowed VLAN.

Explanation

Correct Answer

A:

For a provider Ethernet network carrying customer Layer 2 services, the governing mechanism is: Layer 2 protocol tunneling can transport specified customer control frames across a separate provider bridging domain. It explains the reported symptom: Customer spanning-tree BPDUs must traverse a provider Layer 2 network without controlling the provider's own spanning tree. The intended response is: Enable the supported L2PT mechanism for the selected customer control protocol and service VLAN. Verification: Customer control frames arrive at the remote customer edge without altering provider bridge state.

Incorrect Answers

B:

MSTP region membership depends on compatible region name, revision and VLAN-to-instance mapping digest. This alternative mechanism does not match the current fault.

C:

Junos enhanced Layer 2 switching uses family ethernet-switching configuration on eligible logical interfaces. Fixing that different mechanism would not address the current root cause: layer 2 protocol tunneling can transport specified customer control frames across a separate provider bridging domain.

D:

An Ethernet trunk carries selected tagged VLANs and membership must include every allowed VLAN. Its verification is distinct from the reported condition: Customer spanning-tree BPDUs must traverse a provider Layer 2 network without controlling the provider's own spanning tree. The service must preserve tags without bridging unrelated tenants.

Question 622

At a campus network built with Juniper EX switches, a Junos specialist investigates this scenario: An access switch unexpectedly becomes the root bridge and traffic takes a slow path through the campus. The intended segmentation and loop prevention must remain intact. What requirement most specifically calls for this approach?

  1. Use consistent MSTP region configuration for switches participating in one MST region.
  2. Use spanning-tree priority to control root selection for an MSTP topology.
  3. Use access VLAN assignment for a single untagged user segment.
  4. Use Q-in-Q to transport customer VLAN tags through a provider Ethernet domain.

Explanation

Correct Answer

B:

For a campus network built with Juniper EX switches, this mechanism fits the requirement: Use spanning-tree priority to control root selection for an MSTP topology. The design is appropriate because: Spanning-tree root selection uses bridge identifiers and configured priorities within the relevant instance. In this scenario, the observed issue is: An access switch unexpectedly becomes the root bridge and traffic takes a slow path through the campus. The corresponding implementation is: Set supported bridge priorities so designated distribution switches become root and backup root.

Incorrect Answers

A:

MSTP region membership depends on compatible region name, revision and VLAN-to-instance mapping digest. The appropriate correction for the reported case is: Set supported bridge priorities so designated distribution switches become root and backup root.

C:

An untagged Ethernet access port places endpoint traffic into its configured access VLAN. Fixing that different mechanism would not address the current root cause: spanning-tree root selection uses bridge identifiers and configured priorities within the relevant instance.

D:

IEEE 802.1ad Q-in-Q encapsulates customer-tagged frames with an outer service VLAN tag. Its verification is distinct from the reported condition: An access switch unexpectedly becomes the root bridge and traffic takes a slow path through the campus. The intended segmentation and loop prevention must remain intact.

Question 623

At a university separating multiple OSPF areas, a Junos specialist investigates this scenario: An OSPF connection on a shared segment must reject unauthorized routing speakers. The routing change must preserve control-plane consistency across areas. What protocol behavior accounts for this failure?

  1. OSPF neighbor states depend on interface topology and DR roles; not every TwoWay relation becomes Full.
  2. An OSPF area border router can originate summarized interarea reachability when prefixes allow aggregation.
  3. OSPF protocol authentication checks configured credentials for applicable neighbor exchanges.
  4. Junos OSPF export governs eligible external route origination while import filtering has different route-selection effects.

Explanation

Correct Answer

C:

For a university separating multiple OSPF areas, the governing mechanism is: OSPF protocol authentication checks configured credentials for applicable neighbor exchanges. It explains the reported symptom: An OSPF connection on a shared segment must reject unauthorized routing speakers. The intended response is: Enable a compatible supported authentication method and matching keys for both authorized peers. Verification: Correctly configured peers form an adjacency and an invalid-key test is rejected.

Incorrect Answers

A:

OSPF neighbor states depend on interface topology and DR roles; not every TwoWay relation becomes Full. This alternative mechanism does not match the current fault.

B:

An OSPF area border router can originate summarized interarea reachability when prefixes allow aggregation. Fixing that different mechanism would not address the current root cause: OSPF protocol authentication checks configured credentials for applicable neighbor exchanges.

D:

Junos OSPF export governs eligible external route origination while import filtering has different route-selection effects. Its verification is distinct from the reported condition: An OSPF connection on a shared segment must reject unauthorized routing speakers. The routing change must preserve control-plane consistency across areas.

Question 624

At a live-event venue using routed multicast streaming, a Junos specialist investigates this scenario: Hosts need one multicast source in a group but IGMPv2 membership cannot express the chosen source. The change must preserve source identity and avoid multicast loops. Which underlying distinction should guide troubleshooting?

  1. PIM sparse mode builds multicast forwarding paths in response to explicit joins rather than flooding everywhere.
  2. Shared-tree (*,G) state expresses interest in traffic to group G from potentially multiple sources.
  3. (S,G) multicast state identifies one particular source S and destination group G.
  4. IGMPv3 membership records can identify source filters that enable explicit SSM interest.

Explanation

Correct Answer

D:

For a live-event venue using routed multicast streaming, the governing mechanism is: IGMPv3 membership records can identify source filters that enable explicit SSM interest. It explains the reported symptom: Hosts need one multicast source in a group but IGMPv2 membership cannot express the chosen source. The intended response is: Enable supported IGMPv3 processing and make hosts join the approved source-group pair. Verification: show igmp group displays the intended source filter and unwanted senders do not reach the host.

Incorrect Answers

A:

PIM sparse mode builds multicast forwarding paths in response to explicit joins rather than flooding everywhere. This alternative mechanism does not match the current fault.

B:

Shared-tree (*,G) state expresses interest in traffic to group G from potentially multiple sources. Fixing that different mechanism would not address the current root cause: IGMPv3 membership records can identify source filters that enable explicit SSM interest.

C:

(S,G) multicast state identifies one particular source S and destination group G. Its verification is distinct from the reported condition: Hosts need one multicast source in a group but IGMPv2 membership cannot express the chosen source. The change must preserve source identity and avoid multicast loops.

Question 625

At a managed network team troubleshooting an internet edge, a Junos specialist investigates this scenario: A broad policy accept term precedes a specific reject term and restricted prefixes are still announced. The diagnosis must distinguish a healthy BGP session from eligible received routes. What is the most appropriate correction to implement?

  1. Place specific prefix rejection before a broader permitted match in the relevant policy.
  2. Attach a scoped import policy matching authorized prefixes and explicitly rejecting prohibited ones.
  3. Inspect AS-path attributes and modify permitted policy only if a different transit choice is justified.
  4. Evaluate and apply a supported carefully scoped damping policy only where warranted.

Explanation

Correct Answer

A:

For a managed network team troubleshooting an internet edge, the direct corrective action is: Place specific prefix rejection before a broader permitted match in the relevant policy. This addresses the mechanism: Junos policy terms are evaluated in configured order and a terminating action can end processing early. Confirm by checking: A policy test or advertised-route output confirms restricted prefixes are no longer accepted. During rollout, avoid inserting a catchall accept before security and route-leak protections.

Incorrect Answers

B:

A BGP import policy determines which incoming route advertisements are accepted into the routing table. The appropriate correction for the reported case is: Place specific prefix rejection before a broader permitted match in the relevant policy.

C:

In Junos BGP best-path selection an eligible shorter AS path is generally preferred after higher-priority criteria tie. Fixing that different mechanism would not address the current root cause: junos policy terms are evaluated in configured order and a terminating action can end processing early.

D:

Route-flap damping can suppress repeatedly changing paths according to configured penalties and reuse rules. Its verification is distinct from the reported condition: A broad policy accept term precedes a specific reject term and restricted prefixes are still announced. The diagnosis must distinguish a healthy BGP session from eligible received routes.

Question 626

At a national enterprise designing OSPF between offices, a Junos specialist investigates this scenario: Two routers exchange IPv4 OSPF routes but never discover each other for the IPv6 routing process. The internal forwarding path must remain stable when one uplink fails. Which underlying distinction should guide troubleshooting?

  1. Link-state SPF recalculation is triggered by topology changes and must converge over a coherent LSDB.
  2. OSPFv3 is a distinct link-state protocol requiring correct interface and area enablement for IPv6 environments.
  3. OSPF neighbor discovery requires the relevant logical interface to participate in the correct routing instance and area.
  4. OSPFv3 neighbor exchanges and next-hop forwarding commonly use IPv6 link-local addresses on the adjoining link.

Explanation

Correct Answer

B:

For a national enterprise designing OSPF between offices, the governing mechanism is: OSPFv3 is a distinct link-state protocol requiring correct interface and area enablement for IPv6 environments. It explains the reported symptom: Two routers exchange IPv4 OSPF routes but never discover each other for the IPv6 routing process. The intended response is: Configure the intended OSPFv3 area and IPv6-enabled link interfaces on both peers. Verification: show ospf3 neighbor indicates a healthy IPv6 adjacency and IPv6 routes are learned.

Incorrect Answers

A:

Link-state SPF recalculation is triggered by topology changes and must converge over a coherent LSDB. This alternative mechanism does not match the current fault.

C:

OSPF neighbor discovery requires the relevant logical interface to participate in the correct routing instance and area. Fixing that different mechanism would not address the current root cause: OSPFv3 is a distinct link-state protocol requiring correct interface and area enablement for IPv6 environments.

D:

OSPFv3 neighbor exchanges and next-hop forwarding commonly use IPv6 link-local addresses on the adjoining link. Its verification is distinct from the reported condition: Two routers exchange IPv4 OSPF routes but never discover each other for the IPv6 routing process. The internal forwarding path must remain stable when one uplink fails.

Question 627

At a regional provider operating Junos-based branch routers, a Junos specialist investigates this scenario: A pair of OSPF speakers exchanges packets but reports timer mismatch and no stable adjacency. The team must validate neighbor state rather than assume basic IP reachability proves routing. Which operational result would most clearly confirm the fix?

  1. An IPv6 destination installs with an expected link-local next hop and forwards successfully.
  2. show ospf neighbor shows the intended DR and BDR roles and stable adjacency states.
  3. show ospf neighbor reaches Full and periodic Hellos remain within the agreed dead interval.
  4. Remote areas receive the expected summarized routes and excluded addresses do not blackhole.

Explanation

Correct Answer

C:

For a regional provider operating Junos-based branch routers, the decisive evidence is: show ospf neighbor reaches Full and periodic Hellos remain within the agreed dead interval. This validates the action: Align supported OSPF Hello and dead intervals on both neighboring interfaces. Because: Neighbor compatibility depends on matching Hello and dead intervals for the participating link. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

A:

OSPFv3 neighbor exchanges and next-hop forwarding commonly use IPv6 link-local addresses on the adjoining link. The appropriate correction for the reported case is: Align supported OSPF Hello and dead intervals on both neighboring interfaces.

B:

On broadcast multiaccess networks OSPF elects a designated router and backup designated router to manage adjacencies. Fixing that different mechanism would not address the current root cause: neighbor compatibility depends on matching Hello and dead intervals for the participating link.

D:

An OSPF area border router can originate summarized interarea reachability when prefixes allow aggregation. Its verification is distinct from the reported condition: A pair of OSPF speakers exchanges packets but reports timer mismatch and no stable adjacency. The team must validate neighbor state rather than assume basic IP reachability proves routing.

Question 628

At a regional provider operating Junos-based branch routers, a Junos specialist investigates this scenario: A legacy area requires backbone reachability through a transit area while direct area-zero attachment is temporarily unavailable. The team must validate neighbor state rather than assume basic IP reachability proves routing. Which response best restores the intended behavior?

  1. Validate the IPv6 link-local adjacency and correct outgoing logical interface for the route.
  2. Enable compatible BFD sessions for the approved OSPF neighbors and test failure detection.
  3. Apply a targeted interarea summarization or route-control policy at the correct OSPF hierarchy.
  4. Configure the same transit area and peer router identifiers at both virtual-link endpoints.

Explanation

Correct Answer

D:

For a regional provider operating Junos-based branch routers, the direct corrective action is: Configure the same transit area and peer router identifiers at both virtual-link endpoints. This addresses the mechanism: A supported OSPF virtual link can logically extend the backbone through a nonstub transit area between eligible ABRs. Confirm by checking: The virtual link reaches the expected operational state and the remote area receives backbone routes. During rollout, treat a virtual link as a controlled exception and plan a physical backbone repair.

Incorrect Answers

A:

OSPFv3 neighbor exchanges and next-hop forwarding commonly use IPv6 link-local addresses on the adjoining link. The appropriate correction for the reported case is: Configure the same transit area and peer router identifiers at both virtual-link endpoints.

B:

Bidirectional Forwarding Detection can provide rapid independent liveliness detection for supported routing peers. Fixing that different mechanism would not address the current root cause: a supported OSPF virtual link can logically extend the backbone through a nonstub transit area between eligible ABRs.

C:

OSPF interarea summary-LSA generation can be governed with supported routing policies on ABRs. Its verification is distinct from the reported condition: A legacy area requires backbone reachability through a transit area while direct area-zero attachment is temporarily unavailable. The team must validate neighbor state rather than assume basic IP reachability proves routing.

Question 629

At a multimedia training network running Junos multicast routers, a Junos specialist investigates this scenario: A receiver knows the multicast publisher IP but unnecessary RP dependencies delay traffic setup. The corrected tree must respect source and group authorization. Which design objective is best served by this mechanism?

  1. Use SSM for an application with a known, explicitly selected multicast source.
  2. Use multicast source-group policy to restrict who may deliver group traffic.
  3. Use source-group entries to trace a single multicast sender's path.
  4. Use multicast route tables to troubleshoot one-way group forwarding failures.

Explanation

Correct Answer

A:

For a multimedia training network running Junos multicast routers, this mechanism fits the requirement: Use SSM for an application with a known, explicitly selected multicast source. The design is appropriate because: Source-specific multicast uses explicit (S,G) interests and does not require an ASM rendezvous point. In this scenario, the observed issue is: A receiver knows the multicast publisher IP but unnecessary RP dependencies delay traffic setup. The corresponding implementation is: Use an approved SSM group and source-aware receiver membership with compatible PIM behavior.

Incorrect Answers

B:

PIM and multicast routing policy can be applied to limit permitted source and group reachability. The appropriate correction for the reported case is: Use an approved SSM group and source-aware receiver membership with compatible PIM behavior.

C:

(S,G) multicast state identifies one particular source S and destination group G. Fixing that different mechanism would not address the current root cause: source-specific multicast uses explicit (S,G) interests and does not require an ASM rendezvous point.

D:

Multicast forwarding depends on per-group and per-source route state in addition to host membership. Its verification is distinct from the reported condition: A receiver knows the multicast publisher IP but unnecessary RP dependencies delay traffic setup. The corrected tree must respect source and group authorization.

Question 630

At an enterprise telemetry network with multicast subscribers, a Junos specialist investigates this scenario: A conferencing application expects an unknown multicast source but engineers require each client to specify a sender IP. The team should test joins and forwarding separately. Which limitation should guide the change control?

  1. Check the RP mapping before assuming a source-specific join is mandatory for ASM.
  2. Consider unwanted sources and multicast boundary controls in an open ASM group.
  3. Avoid enabling PIM on unrelated edge ports or firewall zones by default.
  4. Verify unicast routing to the source or RP before expecting successful reverse-path checks.

Explanation

Correct Answer

B:

For an enterprise telemetry network with multicast subscribers, the relevant safeguard is: Consider unwanted sources and multicast boundary controls in an open ASM group. It matters while implementing: Design a suitable ASM group with functioning IGMP membership and rendezvous-point information. The fault involves: Any-source multicast allows receivers to request a group independent of a specific source, typically using a shared-tree mechanism. The required acceptance result remains: A receiver can join G and obtain traffic from an approved discovered sender.

Incorrect Answers

A:

Shared-tree (*,G) state expresses interest in traffic to group G from potentially multiple sources. The appropriate correction for the reported case is: Consider unwanted sources and multicast boundary controls in an open ASM group.

C:

PIM routers discover routing neighbors on participating interfaces through PIM Hello exchanges. Fixing that different mechanism would not address the current root cause: any-source multicast allows receivers to request a group independent of a specific source, typically using a shared-tree mechanism.

D:

PIM sparse mode builds multicast forwarding paths in response to explicit joins rather than flooding everywhere. Its verification is distinct from the reported condition: A conferencing application expects an unknown multicast source but engineers require each client to specify a sender IP. The team should test joins and forwarding separately.

Enterprise Routing and Switching, Professional (JNCIP-ENT) (JN0-650) Practice Tests