mcAfee Secure Website
exam =5
exam =6

Exam Code: JN0-650

Exam Name: Enterprise Routing and Switching, Professional (JNCIP-ENT)

Certification Provider: Juniper

Corresponding Certification: JNCIP-ENT

Juniper JN0-650 Questions & Answers

Reliable & Actual Study Materials for JN0-650 Exam Success

107 Questions & Answers with Testing Engine

"JN0-650: Enterprise Routing and Switching, Professional (JNCIP-ENT)" Testing Engine covers all the knowledge points of the real Juniper JN0-650 exam.

The latest actual JN0-650 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at JN0-650 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Juniper Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Juniper JN0-650 Practice Test 62

Question 610

At an enterprise telemetry network with multicast subscribers, a Junos specialist investigates this scenario: The operations team sees (S,G) entries and assumes they mean every source may send to a joined group. The team should test joins and forwarding separately. What protocol behavior accounts for this failure?

  1. IPv4 multicast traffic uses group addresses from 224.0.0.0 through 239.255.255.255 rather than ordinary unicast host destinations.
  2. (S,G) multicast state identifies one particular source S and destination group G.
  3. Multicast group and routing policies can limit which group ranges and sources cross specified boundaries.
  4. Shared-tree (*,G) state expresses interest in traffic to group G from potentially multiple sources.

Explanation

Correct Answer

B:

For an enterprise telemetry network with multicast subscribers, the governing mechanism is: (S,G) multicast state identifies one particular source S and destination group G. It explains the reported symptom: The operations team sees (S,G) entries and assumes they mean every source may send to a joined group. The intended response is: Inspect the source and group state to diagnose the correct sender-specific distribution tree. Verification: show multicast route or PIM state contains the planned source-group combination.

Incorrect Answers

A:

IPv4 multicast traffic uses group addresses from 224.0.0.0 through 239.255.255.255 rather than ordinary unicast host destinations. This alternative mechanism does not match the current fault.

C:

Multicast group and routing policies can limit which group ranges and sources cross specified boundaries. Fixing that different mechanism would not address the current root cause: (S,G) multicast state identifies one particular source S and destination group G.

D:

Shared-tree (*,G) state expresses interest in traffic to group G from potentially multiple sources. Its verification is distinct from the reported condition: The operations team sees (S,G) entries and assumes they mean every source may send to a joined group. The team should test joins and forwarding separately.

Question 611

At an enterprise telemetry network with multicast subscribers, a Junos specialist investigates this scenario: Two multicast routers share a source LAN and operators cannot determine which device registers a new ASM source. The team should test joins and forwarding separately. For which use case is this feature the best match?

  1. Use multicast route tables to troubleshoot one-way group forwarding failures.
  2. Use PIM Register messages to introduce ASM sources to a rendezvous point.
  3. Use PIM designated-router selection to coordinate multicast functions on shared links.
  4. Use multicast source-group policy to restrict who may deliver group traffic.

Explanation

Correct Answer

C:

For an enterprise telemetry network with multicast subscribers, this mechanism fits the requirement: Use PIM designated-router selection to coordinate multicast functions on shared links. The design is appropriate because: PIM designated-router election selects the local router responsible for certain first-hop PIM functions. In this scenario, the observed issue is: Two multicast routers share a source LAN and operators cannot determine which device registers a new ASM source. The corresponding implementation is: Confirm neighbor priorities and configured DR role on the shared segment.

Incorrect Answers

A:

Multicast forwarding depends on per-group and per-source route state in addition to host membership. The appropriate correction for the reported case is: Confirm neighbor priorities and configured DR role on the shared segment.

B:

In PIM sparse-mode ASM, a first-hop designated router can register new source traffic with the RP. Fixing that different mechanism would not address the current root cause: PIM designated-router election selects the local router responsible for certain first-hop PIM functions.

D:

PIM and multicast routing policy can be applied to limit permitted source and group reachability. Its verification is distinct from the reported condition: Two multicast routers share a source LAN and operators cannot determine which device registers a new ASM source. The team should test joins and forwarding separately.

Question 612

At a large organization using Junos route reflectors, a Junos specialist investigates this scenario: A control-plane restart triggers avoidable route withdrawal despite forwarding continuing on a capable BGP neighbor. The change must not introduce an unwanted autonomous-system route leak. Which response best restores the intended behavior?

  1. Check source reachability and permit the specifically authorized BGP TCP flow across the interconnect.
  2. Repair the underlay route to the received BGP next hop or apply a deliberate next-hop policy.
  3. Apply approved next-hop self behavior at the correct iBGP advertisement boundary.
  4. Configure compatible graceful-restart behavior and timers across designated peers.

Explanation

Correct Answer

D:

For a large organization using Junos route reflectors, the direct corrective action is: Configure compatible graceful-restart behavior and timers across designated peers. This addresses the mechanism: BGP graceful restart can preserve selected forwarding state during brief compatible control-plane interruptions. Confirm by checking: A controlled restart retains eligible forwarding for the negotiated grace interval and recovers correctly. During rollout, plan stale-route timeout and avoid assuming graceful restart survives all dataplane failures.

Incorrect Answers

A:

BGP depends on a reachable TCP transport path, normally using destination port 179. The appropriate correction for the reported case is: Configure compatible graceful-restart behavior and timers across designated peers.

B:

A usable BGP route requires an eligible reachable forwarding next hop before it can become active. Fixing that different mechanism would not address the current root cause: BGP graceful restart can preserve selected forwarding state during brief compatible control-plane interruptions.

C:

IBGP propagation may retain the original eBGP next-hop attribute unless policy or configuration changes it. Its verification is distinct from the reported condition: A control-plane restart triggers avoidable route withdrawal despite forwarding continuing on a capable BGP neighbor. The change must not introduce an unwanted autonomous-system route leak.

Question 613

At a data-center access fabric using tagged trunks, a Junos specialist investigates this scenario: A Junos switch physical port is configured without suitable Layer 2 logical interface family and VLAN traffic never bridges. The proposed behavior must be validated on actual switching ports. Which operational change most directly resolves the observed failure?

  1. Configure the intended ethernet-switching family and interface mode at supported hierarchy.
  2. Verify MAC learning and the relevant source port/VLAN association.
  3. Set supported bridge priorities so designated distribution switches become root and backup root.
  4. Increase supported link MTU consistently or adjust customer frame limits where required.

Explanation

Correct Answer

A:

For a data-center access fabric using tagged trunks, the direct corrective action is: Configure the intended ethernet-switching family and interface mode at supported hierarchy. This addresses the mechanism: Junos enhanced Layer 2 switching uses family ethernet-switching configuration on eligible logical interfaces. Confirm by checking: show ethernet-switching interfaces lists the port and correct VLAN context. During rollout, check ELS platform syntax rather than copying legacy switch syntax without validation.

Incorrect Answers

B:

Layer 2 switches learn source MAC addresses on ingress ports and forward known unicast using their MAC tables. The appropriate correction for the reported case is: Configure the intended ethernet-switching family and interface mode at supported hierarchy.

C:

Spanning-tree root selection uses bridge identifiers and configured priorities within the relevant instance. Fixing that different mechanism would not address the current root cause: junos enhanced Layer 2 switching uses family ethernet-switching configuration on eligible logical interfaces.

D:

Adding an outer VLAN tag increases Ethernet frame size and may exceed an interface's supported MTU. Its verification is distinct from the reported condition: A Junos switch physical port is configured without suitable Layer 2 logical interface family and VLAN traffic never bridges. The proposed behavior must be validated on actual switching ports.

Question 614

At a managed network team troubleshooting an internet edge, a Junos specialist investigates this scenario: An iBGP speaker advertises a learned external prefix but internal clients cannot reach the external provider next hop. The diagnosis must distinguish a healthy BGP session from eligible received routes. What risk must the implementation avoid?

  1. Avoid broad allow-as-in exceptions without a documented multi-AS design.
  2. Confirm the advertising router actually has valid egress before making it a transit hop.
  3. Avoid assuming an Established IPv4 BGP session proves IPv6 NLRI capability.
  4. Avoid setting next hop to self without confirming the chosen egress can actually forward the traffic.

Explanation

Correct Answer

B:

For a managed network team troubleshooting an internet edge, the relevant safeguard is: Confirm the advertising router actually has valid egress before making it a transit hop. It matters while implementing: Apply approved next-hop self behavior at the correct iBGP advertisement boundary. The fault involves: iBGP propagation may retain the original eBGP next-hop attribute unless policy or configuration changes it. The required acceptance result remains: Internal routers resolve the advertised next hop through the enterprise IGP and can forward to the prefix.

Incorrect Answers

A:

BGP AS-path loop detection normally prevents accepting routes already traversing the local autonomous system. The appropriate correction for the reported case is: Confirm the advertising router actually has valid egress before making it a transit hop.

C:

BGP address-family negotiation determines whether IPv6 unicast NLRI can be exchanged. Fixing that different mechanism would not address the current root cause: iBGP propagation may retain the original eBGP next-hop attribute unless policy or configuration changes it.

D:

A usable BGP route requires an eligible reachable forwarding next hop before it can become active. Its verification is distinct from the reported condition: An iBGP speaker advertises a learned external prefix but internal clients cannot reach the external provider next hop. The diagnosis must distinguish a healthy BGP session from eligible received routes.

Question 615

At a large enterprise updating redundant switch links, a Junos specialist investigates this scenario: Two customers using overlapping inner VLAN IDs communicate unexpectedly after a service-provider bridging change. The change must retain both link resilience and correct VLAN isolation. What verification result should the engineer expect?

  1. Each VLAN shows the intended root and blocked ports without creating a loop.
  2. Captures show preserved inner customer tags inside the expected outer service tag.
  3. Captures show identical inner tags transported only within their intended outer service VLANs.
  4. The aggregate reports active members and traffic survives loss of one constituent link.

Explanation

Correct Answer

C:

For a large enterprise updating redundant switch links, the decisive evidence is: Captures show identical inner tags transported only within their intended outer service VLANs. This validates the action: Assign distinct outer service VLAN identities to the independent customer services. Because: A provider S-VLAN or equivalent encapsulation boundary is needed to keep identical customer C-VLAN numbers separate. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

A:

VLAN Spanning Tree Protocol allows separate tree instances for selected VLANs and can choose different roots. The appropriate correction for the reported case is: Assign distinct outer service VLAN identities to the independent customer services.

B:

IEEE 802.1ad Q-in-Q encapsulates customer-tagged frames with an outer service VLAN tag. Fixing that different mechanism would not address the current root cause: a provider S-VLAN or equivalent encapsulation boundary is needed to keep identical customer C-VLAN numbers separate.

D:

A link aggregation group presents multiple member links as one logical Ethernet interface when both peers agree. Its verification is distinct from the reported condition: Two customers using overlapping inner VLAN IDs communicate unexpectedly after a service-provider bridging change. The change must retain both link resilience and correct VLAN isolation.

Question 616

At a national enterprise designing OSPF between offices, a Junos specialist investigates this scenario: Traffic needs to use two genuinely equal-cost OSPF paths but only one forwarding next hop appears. The internal forwarding path must remain stable when one uplink fails. What is the most appropriate correction to implement?

  1. Enable compatible BFD sessions for the approved OSPF neighbors and test failure detection.
  2. Configure a consistent NSSA area and permitted redistribution at the branch ASBR.
  3. Apply the policy at the hierarchy appropriate to redistribution rather than assuming import creates advertisements.
  4. Validate equal route metrics and supported forwarding next-hop installation for both eligible paths.

Explanation

Correct Answer

D:

For a national enterprise designing OSPF between offices, the direct corrective action is: Validate equal route metrics and supported forwarding next-hop installation for both eligible paths. This addresses the mechanism: OSPF can compute equal-cost paths; forwarding utilization depends on installed next hops and platform ECMP behavior. Confirm by checking: The selected destination shows multiple eligible next hops and traffic load sharing is observable. During rollout, avoid enabling ECMP across paths with incompatible MTU or traffic-security policies.

Incorrect Answers

A:

Bidirectional Forwarding Detection can provide rapid independent liveliness detection for supported routing peers. The appropriate correction for the reported case is: Validate equal route metrics and supported forwarding next-hop installation for both eligible paths.

B:

A not-so-stubby area allows local external routes using type-7 LSAs and an ABR can translate them toward other areas. Fixing that different mechanism would not address the current root cause: OSPF can compute equal-cost paths; forwarding utilization depends on installed next hops and platform ECMP behavior.

C:

Junos OSPF export governs eligible external route origination while import filtering has different route-selection effects. Its verification is distinct from the reported condition: Traffic needs to use two genuinely equal-cost OSPF paths but only one forwarding next hop appears. The internal forwarding path must remain stable when one uplink fails.

Question 617

At a Junos EVPN-VXLAN leaf-spine fabric, a Junos specialist investigates this scenario: Traffic received from one EVPN multihomed Ethernet segment is re-forwarded through another PE back into that same segment. The tenant traffic must remain isolated across the overlay. Which observation proves this requirement has been satisfied?

  1. A loop test shows that frames from the segment are not reflected back through a peer attachment.
  2. Only matching tenant MAC and prefix advertisements enter each isolated EVPN instance.
  3. A test host in one VLAN exchanges frames only with its matching remote VNI segment.
  4. Only the elected active side forwards tenant traffic until controlled failover.

Explanation

Correct Answer

A:

For a Junos EVPN-VXLAN leaf-spine fabric, the decisive evidence is: A loop test shows that frames from the segment are not reflected back through a peer attachment. This validates the action: Verify supported split-horizon or ESI label handling for the affected multihomed path. Because: EVPN multihoming split-horizon mechanisms prevent reflected traffic from looping across a common Ethernet segment. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

B:

EVPN route targets determine which routes are imported into the relevant EVPN instances and tenant contexts. The appropriate correction for the reported case is: Verify supported split-horizon or ESI label handling for the affected multihomed path.

C:

VXLAN uses a 24-bit VNI to identify a logical overlay segment associated with local bridging context. Fixing that different mechanism would not address the current root cause: EVPN multihoming split-horizon mechanisms prevent reflected traffic from looping across a common Ethernet segment.

D:

EVPN single-active multihoming restricts the forwarding role on an Ethernet segment to a selected active PE. Its verification is distinct from the reported condition: Traffic received from one EVPN multihomed Ethernet segment is re-forwarded through another PE back into that same segment. The tenant traffic must remain isolated across the overlay.

Question 618

At a large organization using Junos route reflectors, a Junos specialist investigates this scenario: Two routers in the same enterprise AS exchange IP reachability but their intended iBGP session never establishes. The change must not introduce an unwanted autonomous-system route leak. Which operational change most directly resolves the observed failure?

  1. Configure the correct complete AS value on both peers using supported BGP capability negotiation.
  2. Configure the approved internal BGP group with correct peer addresses and peer AS membership.
  3. Choose exact or bounded prefix-length matching appropriate to the advertisement contract.
  4. Enable matching supported BGP authentication keys on both sides and test staged replacement.

Explanation

Correct Answer

B:

For a large organization using Junos route reflectors, the direct corrective action is: Configure the approved internal BGP group with correct peer addresses and peer AS membership. This addresses the mechanism: iBGP requires compatible local and remote AS settings, TCP reachability and correct neighbor addresses. Confirm by checking: show BGP summary identifies the internal peer in Established state. During rollout, validate route reachability to the peer loopback before changing route policy.

Incorrect Answers

A:

BGP supports 4-octet autonomous system numbering through compatible capabilities and AS processing. The appropriate correction for the reported case is: Configure the approved internal BGP group with correct peer addresses and peer AS membership.

C:

Junos route filters distinguish exact matching from longer or longer-prefix patterns. Fixing that different mechanism would not address the current root cause: iBGP requires compatible local and remote AS settings, TCP reachability and correct neighbor addresses.

D:

Compatible TCP-level BGP authentication methods can verify the configured neighbor relationship. Its verification is distinct from the reported condition: Two routers in the same enterprise AS exchange IP reachability but their intended iBGP session never establishes. The change must not introduce an unwanted autonomous-system route leak.

Question 619

At a Junos EVPN-VXLAN leaf-spine fabric, a Junos specialist investigates this scenario: Two leaf switches dual-home one server but the remote fabric treats their attachments as unrelated segments. The tenant traffic must remain isolated across the overlay. What risk must the implementation avoid?

  1. Validate split-horizon, DF and CE LAG behavior so redundancy does not create loops.
  2. Check duplicate MAC and route-target behavior before forcing remote FDB entries.
  3. Do not assign one ESI to physically unrelated server or tenant attachments.
  4. Avoid accidentally reusing an Ethernet segment identifier for unrelated customer attachments.

Explanation

Correct Answer

C:

For a Junos EVPN-VXLAN leaf-spine fabric, the relevant safeguard is: Do not assign one ESI to physically unrelated server or tenant attachments. It matters while implementing: Configure a consistent nonconflicting ESI on the intended dual-homed attachment. The fault involves: A common Ethernet Segment Identifier identifies the shared multihomed Ethernet segment for EVPN coordination. The required acceptance result remains: Both participating leaves advertise the same segment identity and remote EVPN state reflects multihoming.

Incorrect Answers

A:

EVPN all-active multihoming permits multiple PEs to forward eligible known-unicast traffic with appropriate control-plane loop prevention. The appropriate correction for the reported case is: Do not assign one ESI to physically unrelated server or tenant attachments.

B:

EVPN route type 2 advertises MAC reachability and can include associated IP information for hosts. Fixing that different mechanism would not address the current root cause: a common Ethernet Segment Identifier identifies the shared multihomed Ethernet segment for EVPN coordination.

D:

EVPN Ethernet Segment route type 4 supports discovery of PEs connected to the same Ethernet segment. Its verification is distinct from the reported condition: Two leaf switches dual-home one server but the remote fabric treats their attachments as unrelated segments. The tenant traffic must remain isolated across the overlay.

Question 620

At a campus distributing IP video to several buildings, a Junos specialist investigates this scenario: An upstream multicast router receives no distribution request even though a downstream receiver requires the stream. The group traffic must reach interested receivers without flooding other locations. Which technical mechanism most directly explains the symptom?

  1. Any-source multicast allows receivers to request a group independent of a specific source, typically using a shared-tree mechanism.
  2. PIM and multicast routing policy can be applied to limit permitted source and group reachability.
  3. Shared-tree (*,G) state expresses interest in traffic to group G from potentially multiple sources.
  4. PIM sparse mode builds multicast forwarding paths in response to explicit joins rather than flooding everywhere.

Explanation

Correct Answer

D:

For a campus distributing IP video to several buildings, the governing mechanism is: PIM sparse mode builds multicast forwarding paths in response to explicit joins rather than flooding everywhere. It explains the reported symptom: An upstream multicast router receives no distribution request even though a downstream receiver requires the stream. The intended response is: Enable compatible sparse-mode PIM and verify receiver-driven upstream join signaling. Verification: show pim join reports an expected entry and packets follow the joined multicast branch.

Incorrect Answers

A:

Any-source multicast allows receivers to request a group independent of a specific source, typically using a shared-tree mechanism. This alternative mechanism does not match the current fault.

B:

PIM and multicast routing policy can be applied to limit permitted source and group reachability. Fixing that different mechanism would not address the current root cause: PIM sparse mode builds multicast forwarding paths in response to explicit joins rather than flooding everywhere.

C:

Shared-tree (*,G) state expresses interest in traffic to group G from potentially multiple sources. Its verification is distinct from the reported condition: An upstream multicast router receives no distribution request even though a downstream receiver requires the stream. The group traffic must reach interested receivers without flooding other locations.

Enterprise Routing and Switching, Professional (JNCIP-ENT) (JN0-650) Practice Tests