mcAfee Secure Website
exam =5
exam =6

Exam Code: JN0-650

Exam Name: Enterprise Routing and Switching, Professional (JNCIP-ENT)

Certification Provider: Juniper

Corresponding Certification: JNCIP-ENT

Juniper JN0-650 Questions & Answers

Reliable & Actual Study Materials for JN0-650 Exam Success

107 Questions & Answers with Testing Engine

"JN0-650: Enterprise Routing and Switching, Professional (JNCIP-ENT)" Testing Engine covers all the knowledge points of the real Juniper JN0-650 exam.

The latest actual JN0-650 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at JN0-650 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Juniper Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Juniper JN0-650 Practice Test 55

Question 540

At a managed network team troubleshooting an internet edge, a Junos specialist investigates this scenario: An iBGP session over loopbacks fails because the outgoing TCP connection uses a physical-interface source address. The diagnosis must distinguish a healthy BGP session from eligible received routes. When would the described mechanism be appropriate?

  1. Use eBGP multihop for intentionally non-direct external BGP peerings.
  2. Use iBGP to distribute BGP-learned routes within one autonomous system.
  3. Use inet6-unicast BGP family to advertise and receive IPv6 network reachability.
  4. Use stable loopback addresses for resilient internal BGP sessions.

Explanation

Correct Answer

D:

For a managed network team troubleshooting an internet edge, this mechanism fits the requirement: Use stable loopback addresses for resilient internal BGP sessions. The design is appropriate because: Both ends of a loopback-based BGP session must reach and recognize the configured local addresses. In this scenario, the observed issue is: An iBGP session over loopbacks fails because the outgoing TCP connection uses a physical-interface source address. The corresponding implementation is: Set the BGP local-address to the intended routable loopback and verify remote peer configuration.

Incorrect Answers

A:

A nonadjacent eBGP neighbor may require a compatible multihop TTL and suitable route to the remote endpoint. The appropriate correction for the reported case is: Set the BGP local-address to the intended routable loopback and verify remote peer configuration.

B:

IBGP requires compatible local and remote AS settings, TCP reachability and correct neighbor addresses. Fixing that different mechanism would not address the current root cause: both ends of a loopback-based BGP session must reach and recognize the configured local addresses.

C:

BGP address-family negotiation determines whether IPv6 unicast NLRI can be exchanged. Its verification is distinct from the reported condition: An iBGP session over loopbacks fails because the outgoing TCP connection uses a physical-interface source address. The diagnosis must distinguish a healthy BGP session from eligible received routes. When would the described mechanism be appropriate.

Question 541

At a service provider offering isolated VXLAN services, a Junos specialist investigates this scenario: Multiple PEs attach to one Ethernet segment but cannot discover consistent peers for multihoming decisions. The engineer must verify both BGP EVPN signaling and underlay reachability. Which precaution should be checked before committing the change?

  1. Avoid accidentally reusing an Ethernet segment identifier for unrelated customer attachments.
  2. Check duplicate MAC and route-target behavior before forcing remote FDB entries.
  3. Check all-active versus single-active semantics before changing failover advertisements.
  4. Do not assign one ESI to physically unrelated server or tenant attachments.

Explanation

Correct Answer

A:

For a service provider offering isolated VXLAN services, the relevant safeguard is: Avoid accidentally reusing an Ethernet segment identifier for unrelated customer attachments. It matters while implementing: Verify compatible Ethernet segment identifiers and advertisement of type-4 segment routes. The fault involves: EVPN Ethernet Segment route type 4 supports discovery of PEs connected to the same Ethernet segment. The required acceptance result remains: Each PE sees its expected remote multihoming peers and a consistent segment identity.

Incorrect Answers

B:

EVPN route type 2 advertises MAC reachability and can include associated IP information for hosts. The appropriate correction for the reported case is: Avoid accidentally reusing an Ethernet segment identifier for unrelated customer attachments.

C:

EVPN Ethernet Auto-Discovery route type 1 participates in multihoming reachability and mass-withdraw behavior. Fixing that different mechanism would not address the current root cause: EVPN Ethernet Segment route type 4 supports discovery of PEs connected to the same Ethernet segment.

D:

A common Ethernet Segment Identifier identifies the shared multihomed Ethernet segment for EVPN coordination. Its verification is distinct from the reported condition: Multiple PEs attach to one Ethernet segment but cannot discover consistent peers for multihoming decisions. The engineer must verify both BGP EVPN signaling and underlay reachability.

Question 542

At an enterprise core exchanging BGP routes over redundant WAN paths, a Junos specialist investigates this scenario: Two BGP routes have equal local preference and AS-path length but differ in origin attribute. The chosen route must have a valid data-plane next hop. What protocol behavior accounts for this failure?

  1. Compatible TCP-level BGP authentication methods can verify the configured neighbor relationship.
  2. BGP best-path selection considers origin type after higher-priority attributes, normally preferring IGP over EGP over incomplete.
  3. In Junos BGP best-path selection an eligible shorter AS path is generally preferred after higher-priority criteria tie.
  4. BGP multipath behavior is separate from ordinary best-path selection and requires compatible path attributes and support.

Explanation

Correct Answer

B:

For an enterprise core exchanging BGP routes over redundant WAN paths, the governing mechanism is: BGP best-path selection considers origin type after higher-priority attributes, normally preferring IGP over EGP over incomplete. It explains the reported symptom: Two BGP routes have equal local preference and AS-path length but differ in origin attribute. The intended response is: Inspect the origin attribute and apply policy only if the intended path requires explicit adjustment. Verification: The best route matches documented origin comparison when other earlier criteria are tied.

Incorrect Answers

A:

Compatible TCP-level BGP authentication methods can verify the configured neighbor relationship. This alternative mechanism does not match the current fault.

C:

In Junos BGP best-path selection an eligible shorter AS path is generally preferred after higher-priority criteria tie. Fixing that different mechanism would not address the current root cause: BGP best-path selection considers origin type after higher-priority attributes, normally preferring IGP over EGP over incomplete.

D:

BGP multipath behavior is separate from ordinary best-path selection and requires compatible path attributes and support. Its verification is distinct from the reported condition: Two BGP routes have equal local preference and AS-path length but differ in origin attribute. The chosen route must have a valid data-plane next hop.

Question 543

At a university separating multiple OSPF areas, a Junos specialist investigates this scenario: A route is visible locally but network engineers confuse accepting it into a RIB with advertising it as a new OSPF external LSA. The routing change must preserve control-plane consistency across areas. What requirement most specifically calls for this approach?

  1. Use OSPFv3 for link-state routing of eligible IPv6 enterprise prefixes.
  2. Use OSPF interface costs to prefer one internal path over another.
  3. Use OSPF export policy rather than import policy to redistribute selected local routes.
  4. Use OSPFv3 export policy for approved external IPv6 reachability.

Explanation

Correct Answer

C:

For a university separating multiple OSPF areas, this mechanism fits the requirement: Use OSPF export policy rather than import policy to redistribute selected local routes. The design is appropriate because: Junos OSPF export governs eligible external route origination while import filtering has different route-selection effects. In this scenario, the observed issue is: A route is visible locally but network engineers confuse accepting it into a RIB with advertising it as a new OSPF external LSA. The corresponding implementation is: Apply the policy at the hierarchy appropriate to redistribution rather than assuming import creates advertisements.

Incorrect Answers

A:

OSPFv3 is a distinct link-state protocol requiring correct interface and area enablement for IPv6 environments. The appropriate correction for the reported case is: Apply the policy at the hierarchy appropriate to redistribution rather than assuming import creates advertisements.

B:

OSPF shortest-path selection is driven by cumulative link metrics rather than a human label for preferred circuits. Fixing that different mechanism would not address the current root cause: junos OSPF export governs eligible external route origination while import filtering has different route-selection effects.

D:

Junos requires a suitable route export policy to originate eligible non-OSPFv3 routes. Its verification is distinct from the reported condition: A route is visible locally but network engineers confuse accepting it into a RIB with advertising it as a new OSPF external LSA. The routing change must preserve control-plane consistency across areas.

Question 544

At an enterprise telemetry network with multicast subscribers, a Junos specialist investigates this scenario: A multicast video stream floods every port in a VLAN although only two receivers joined. The team should test joins and forwarding separately. What is the most appropriate correction to implement?

  1. Enable the supported SPT behavior and verify source-directed joins where appropriate.
  2. Provide an approved IGMP querier or routed multicast interface for the VLAN.
  3. Configure a compatible bootstrap router and candidate RP strategy within the intended administrative scope.
  4. Configure supported IGMP snooping and verify a reachable multicast-router port in the receiver VLAN.

Explanation

Correct Answer

D:

For an enterprise telemetry network with multicast subscribers, the direct corrective action is: Configure supported IGMP snooping and verify a reachable multicast-router port in the receiver VLAN. This addresses the mechanism: IGMP snooping lets a Layer 2 switch learn interested receiver ports and limit multicast flooding within a VLAN. Confirm by checking: Only joined receiver ports receive the test multicast frames during stable operation. During rollout, check querier and router-port discovery so memberships do not age out unexpectedly.

Incorrect Answers

A:

PIM-SM can transition selected traffic from an RP-rooted shared tree to a source-rooted shortest-path tree. The appropriate correction for the reported case is: Configure supported IGMP snooping and verify a reachable multicast-router port in the receiver VLAN.

B:

IGMP membership maintenance relies on periodic queries from a suitable multicast querier. Fixing that different mechanism would not address the current root cause: IGMP snooping lets a Layer 2 switch learn interested receiver ports and limit multicast flooding within a VLAN.

C:

PIM bootstrap router mechanisms can advertise eligible RP information to routers in the multicast domain. Its verification is distinct from the reported condition: A multicast video stream floods every port in a VLAN although only two receivers joined. The team should test joins and forwarding separately.

Question 545

At a live-event venue using routed multicast streaming, a Junos specialist investigates this scenario: Multicast packets never cross an inter-router link and no PIM adjacency appears although IP unicast works. The change must preserve source identity and avoid multicast loops. What requirement most specifically calls for this approach?

  1. Use PIM Hello adjacency to establish multicast routing peers.
  2. Use multicast scoping to contain group distribution within approved regions.
  3. Use an IGMP querier to maintain receiver state in a multicast VLAN.
  4. Use PIM bootstrap-based RP discovery in compatible sparse-mode domains.

Explanation

Correct Answer

A:

For a live-event venue using routed multicast streaming, this mechanism fits the requirement: Use PIM Hello adjacency to establish multicast routing peers. The design is appropriate because: PIM routers discover routing neighbors on participating interfaces through PIM Hello exchanges. In this scenario, the observed issue is: Multicast packets never cross an inter-router link and no PIM adjacency appears although IP unicast works. The corresponding implementation is: Enable compatible PIM on the appropriate routed interfaces and allow required multicast control traffic.

Incorrect Answers

B:

Multicast group and routing policies can limit which group ranges and sources cross specified boundaries. The appropriate correction for the reported case is: Enable compatible PIM on the appropriate routed interfaces and allow required multicast control traffic.

C:

IGMP membership maintenance relies on periodic queries from a suitable multicast querier. Fixing that different mechanism would not address the current root cause: PIM routers discover routing neighbors on participating interfaces through PIM Hello exchanges.

D:

PIM bootstrap router mechanisms can advertise eligible RP information to routers in the multicast domain. Its verification is distinct from the reported condition: Multicast packets never cross an inter-router link and no PIM adjacency appears although IP unicast works. The change must preserve source identity and avoid multicast loops.

Question 546

At a branch router serving several application classes, a Junos specialist investigates this scenario: An enterprise shapes a WAN uplink but class scheduling behaves unpredictably within the aggregate cap. The team must validate packet drops by actual queue statistics. Which technical mechanism most directly explains the symptom?

  1. Junos rewrite rules map internal forwarding class and loss-priority information to outgoing packet codepoints.
  2. Hierarchical CoS policies coordinate parent traffic shaping with child class queues or scheduler allocation where supported.
  3. Classification determines internal forwarding class while rewrite rules modify markings on outgoing packets.
  4. Per-queue counters reveal forwarding class use, transmission and discard behavior during congestion.

Explanation

Correct Answer

B:

For a branch router serving several application classes, the governing mechanism is: Hierarchical CoS policies coordinate parent traffic shaping with child class queues or scheduler allocation where supported. It explains the reported symptom: An enterprise shapes a WAN uplink but class scheduling behaves unpredictably within the aggregate cap. The intended response is: Configure the supported shaper and subordinate scheduler policy according to the actual forwarding hierarchy. Verification: Aggregate throughput stays under the circuit limit while class queues meet their intended bandwidth shares.

Incorrect Answers

A:

Junos rewrite rules map internal forwarding class and loss-priority information to outgoing packet codepoints. This alternative mechanism does not match the current fault.

C:

Classification determines internal forwarding class while rewrite rules modify markings on outgoing packets. Fixing that different mechanism would not address the current root cause: Hierarchical CoS policies coordinate parent traffic shaping with child class queues or scheduler allocation where supported.

D:

Per-queue counters reveal forwarding class use, transmission and discard behavior during congestion. Its verification is distinct from the reported condition: An enterprise shapes a WAN uplink but class scheduling behaves unpredictably within the aggregate cap. The team must validate packet drops by actual queue statistics.

Question 547

At a live-event venue using routed multicast streaming, a Junos specialist investigates this scenario: A multicast security policy permits only approved publishers but receivers can still discover an unauthorized source. The change must preserve source identity and avoid multicast loops. Which operational result would most clearly confirm the fix?

  1. show multicast route or PIM state contains the planned source-group combination.
  2. The network reports expected (*,G) membership and delivers approved ASM traffic.
  3. Approved stream sources deliver while unauthorized source traffic does not build usable state.
  4. show msdp source-active shows a known source and receivers on the other RP reach it.

Explanation

Correct Answer

C:

For a live-event venue using routed multicast streaming, the decisive evidence is: Approved stream sources deliver while unauthorized source traffic does not build usable state. This validates the action: Match and reject the prohibited source-group combinations with a suitable Junos multicast policy. Because: PIM and multicast routing policy can be applied to limit permitted source and group reachability. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

A:

(S,G) multicast state identifies one particular source S and destination group G. The appropriate correction for the reported case is: Match and reject the prohibited source-group combinations with a suitable Junos multicast policy.

B:

Shared-tree (*,G) state expresses interest in traffic to group G from potentially multiple sources. Fixing that different mechanism would not address the current root cause: PIM and multicast routing policy can be applied to limit permitted source and group reachability.

D:

Multicast Source Discovery Protocol communicates source-active information between supported RPs. Its verification is distinct from the reported condition: A multicast security policy permits only approved publishers but receivers can still discover an unauthorized source. The change must preserve source identity and avoid multicast loops.

Question 548

At a school building a restricted guest onboarding network, a Junos specialist investigates this scenario: A switch port configured for 802.1X, MAC RADIUS and captive portal grants unexpected access because the fallback sequence is misunderstood. Only approved identities may enter privileged enterprise segments. What important rollout safeguard is most relevant here?

  1. Do not assume a wrong-password response triggers the same behavior as complete nonresponse.
  2. Preserve break-glass and management paths when enabling access control on an active switch.
  3. Do not grant full access merely because the client can exchange EAP packets.
  4. Test device and Junos release support before assuming every simultaneous combination is available.

Explanation

Correct Answer

D:

For a school building a restricted guest onboarding network, the relevant safeguard is: Test device and Junos release support before assuming every simultaneous combination is available. It matters while implementing: Inspect and configure the supported 802.1X then MAC RADIUS then portal method order for that port. The fault involves: Multiple authentication methods can have defined precedence and permitted fallback behavior depending on endpoint response. The required acceptance result remains: Each simulated endpoint type follows the correct method and receives its matching access policy.

Incorrect Answers

A:

A guest VLAN can supply restricted access for supported nonresponsive clients when the authentication mode allows it. The appropriate correction for the reported case is: Test device and Junos release support before assuming every simultaneous combination is available.

B:

802.1X uses a supplicant, switch authenticator and authentication server to validate identity before controlled port access. Fixing that different mechanism would not address the current root cause: multiple authentication methods can have defined precedence and permitted fallback behavior depending on endpoint response.

C:

A RADIUS Access-Reject event is distinct from a silent client and can be mapped to an appropriate reject VLAN. Its verification is distinct from the reported condition: A switch port configured for 802.1X, MAC RADIUS and captive portal grants unexpected access because the fallback sequence is misunderstood. Only approved identities may enter privileged enterprise segments.

Question 549

At a dual-homed business network peering with two upstream providers, a Junos specialist investigates this scenario: A repeatedly unstable external prefix creates constant BGP updates and path recalculation. The routing policy must retain intended primary and backup paths. What is the most appropriate correction to implement?

  1. Evaluate and apply a supported carefully scoped damping policy only where warranted.
  2. Place specific prefix rejection before a broader permitted match in the relevant policy.
  3. Deploy supported route-reflector clusters and designate approved clients with appropriate topology.
  4. Configure the approved internal BGP group with correct peer addresses and peer AS membership.

Explanation

Correct Answer

A:

For a dual-homed business network peering with two upstream providers, the direct corrective action is: Evaluate and apply a supported carefully scoped damping policy only where warranted. This addresses the mechanism: Route-flap damping can suppress repeatedly changing paths according to configured penalties and reuse rules. Confirm by checking: An intentionally unstable test route shows expected damping and eventual reuse after stability. During rollout, avoid blanket damping that may suppress legitimate reachability and delay recovery.

Incorrect Answers

B:

Junos policy terms are evaluated in configured order and a terminating action can end processing early. The appropriate correction for the reported case is: Evaluate and apply a supported carefully scoped damping policy only where warranted.

C:

Ordinary iBGP split-horizon rules avoid re-advertising routes between iBGP peers; route reflectors provide controlled reflection. Fixing that different mechanism would not address the current root cause: route-flap damping can suppress repeatedly changing paths according to configured penalties and reuse rules.

D:

IBGP requires compatible local and remote AS settings, TCP reachability and correct neighbor addresses. Its verification is distinct from the reported condition: A repeatedly unstable external prefix creates constant BGP updates and path recalculation. The routing policy must retain intended primary and backup paths.

Question 550

At an enterprise core exchanging BGP routes over redundant WAN paths, a Junos specialist investigates this scenario: Two route reflectors use inconsistent cluster settings and reflected path behavior differs after failover. The chosen route must have a valid data-plane next hop. For which use case is this feature the best match?

  1. Use inet-unicast family for ordinary IPv4 BGP reachability.
  2. Use consistent cluster-ID design for redundant route reflectors in one cluster.
  3. Use BGP prefix limits to protect route-table capacity from excessive peer announcements.
  4. Use BGP route reflectors to scale internal route distribution beyond a full mesh.

Explanation

Correct Answer

B:

For an enterprise core exchanging BGP routes over redundant WAN paths, this mechanism fits the requirement: Use consistent cluster-ID design for redundant route reflectors in one cluster. The design is appropriate because: Route reflector cluster identifiers participate in loop detection on reflected BGP paths. In this scenario, the observed issue is: Two route reflectors use inconsistent cluster settings and reflected path behavior differs after failover. The corresponding implementation is: Align the designed cluster identifier among redundant reflectors serving the same cluster.

Incorrect Answers

A:

BGP NLRI family selection must include inet-unicast for eligible IPv4 unicast prefixes. The appropriate correction for the reported case is: Align the designed cluster identifier among redundant reflectors serving the same cluster.

C:

A BGP prefix-limit control detects or constrains excessive received NLRI from a peer. Fixing that different mechanism would not address the current root cause: route reflector cluster identifiers participate in loop detection on reflected BGP paths.

D:

Ordinary iBGP split-horizon rules avoid re-advertising routes between iBGP peers; route reflectors provide controlled reflection. Its verification is distinct from the reported condition: Two route reflectors use inconsistent cluster settings and reflected path behavior differs after failover. The chosen route must have a valid data-plane next hop.

Enterprise Routing and Switching, Professional (JNCIP-ENT) (JN0-650) Practice Tests