mcAfee Secure Website
exam =5
exam =6

Exam Code: JN0-650

Exam Name: Enterprise Routing and Switching, Professional (JNCIP-ENT)

Certification Provider: Juniper

Corresponding Certification: JNCIP-ENT

Juniper JN0-650 Questions & Answers

Reliable & Actual Study Materials for JN0-650 Exam Success

107 Questions & Answers with Testing Engine

"JN0-650: Enterprise Routing and Switching, Professional (JNCIP-ENT)" Testing Engine covers all the knowledge points of the real Juniper JN0-650 exam.

The latest actual JN0-650 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at JN0-650 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Juniper Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Juniper JN0-650 Practice Test 43

Question 420

At a healthcare organization connecting redundant facilities, a Junos specialist investigates this scenario: An OSPF neighbor remains in ExStart or Exchange although basic connectivity and Hellos work. The correction must not expose administrative network prefixes. What protocol behavior accounts for this failure?

  1. A passive OSPF interface can advertise attached reachability while suppressing neighbor-discovery Hellos.
  2. A not-so-stubby area allows local external routes using type-7 LSAs and an ABR can translate them toward other areas.
  3. OSPFv3 neighbor exchanges and next-hop forwarding commonly use IPv6 link-local addresses on the adjoining link.
  4. Database-description exchange can fail when peers disagree on the IP MTU for a common OSPF link.

Explanation

Correct Answer

D:

For a healthcare organization connecting redundant facilities, the governing mechanism is: Database-description exchange can fail when peers disagree on the IP MTU for a common OSPF link. It explains the reported symptom: An OSPF neighbor remains in ExStart or Exchange although basic connectivity and Hellos work. The intended response is: Correct the relevant link MTU on both endpoints and restart adjacency safely if necessary. Verification: The neighbor leaves ExStart and reaches Full with synchronized link-state databases.

Incorrect Answers

A:

A passive OSPF interface can advertise attached reachability while suppressing neighbor-discovery Hellos. This alternative mechanism does not match the current fault.

B:

A not-so-stubby area allows local external routes using type-7 LSAs and an ABR can translate them toward other areas. Fixing that different mechanism would not address the current root cause: database-description exchange can fail when peers disagree on the IP MTU for a common OSPF link.

C:

OSPFv3 neighbor exchanges and next-hop forwarding commonly use IPv6 link-local addresses on the adjoining link. Its verification is distinct from the reported condition: An OSPF neighbor remains in ExStart or Exchange although basic connectivity and Hellos work. The correction must not expose administrative network prefixes.

Question 421

At an enterprise telemetry network with multicast subscribers, a Junos specialist investigates this scenario: Two multicast routers share a source LAN and operators cannot determine which device registers a new ASM source. The team should test joins and forwarding separately. Which operational change most directly resolves the observed failure?

  1. Confirm neighbor priorities and configured DR role on the shared segment.
  2. Enable supported IGMPv3 processing and make hosts join the approved source-group pair.
  3. Configure a compatible bootstrap router and candidate RP strategy within the intended administrative scope.
  4. Enable compatible sparse-mode PIM and verify receiver-driven upstream join signaling.

Explanation

Correct Answer

A:

For an enterprise telemetry network with multicast subscribers, the direct corrective action is: Confirm neighbor priorities and configured DR role on the shared segment. This addresses the mechanism: PIM designated-router election selects the local router responsible for certain first-hop PIM functions. Confirm by checking: The expected DR handles source registration and state transitions during controlled failover. During rollout, test the backup DR behavior so only authorized registration paths remain available.

Incorrect Answers

B:

IGMPv3 membership records can identify source filters that enable explicit SSM interest. The appropriate correction for the reported case is: Confirm neighbor priorities and configured DR role on the shared segment.

C:

PIM bootstrap router mechanisms can advertise eligible RP information to routers in the multicast domain. Fixing that different mechanism would not address the current root cause: PIM designated-router election selects the local router responsible for certain first-hop PIM functions.

D:

PIM sparse mode builds multicast forwarding paths in response to explicit joins rather than flooding everywhere. Its verification is distinct from the reported condition: Two multicast routers share a source LAN and operators cannot determine which device registers a new ASM source. The team should test joins and forwarding separately.

Question 422

At a financial services network enforcing trusted DSCP markings, a Junos specialist investigates this scenario: Traffic is internally classified correctly but leaves the site with DSCP markings that an upstream provider does not recognize. Classification and downstream remarking must not be confused. What verification result should the engineer expect?

  1. A representative phone flow enters the chosen forwarding class while ordinary traffic remains best effort.
  2. Packet captures on egress show the agreed DSCP values for representative classes.
  3. Packets with the approved DSCP values enter the expected forwarding queues.
  4. The compliant test burst passes while sustained traffic beyond the policy is limited.

Explanation

Correct Answer

B:

For a financial services network enforcing trusted DSCP markings, the decisive evidence is: Packet captures on egress show the agreed DSCP values for representative classes. This validates the action: Apply a supported DSCP rewrite rule on the designated egress interface. Because: Junos rewrite rules map internal forwarding class and loss-priority information to outgoing packet codepoints. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

A:

A multifield firewall filter can classify selected packets using header fields and set an appropriate forwarding class. The appropriate correction for the reported case is: Apply a supported DSCP rewrite rule on the designated egress interface.

C:

A behavior aggregate classifier maps incoming codepoint values to local forwarding class and loss priority. Fixing that different mechanism would not address the current root cause: junos rewrite rules map internal forwarding class and loss-priority information to outgoing packet codepoints.

D:

Rate policers use token or burst parameters that influence which short bursts are considered conformant. Its verification is distinct from the reported condition: Traffic is internally classified correctly but leaves the site with DSCP markings that an upstream provider does not recognize. Classification and downstream remarking must not be confused.

Question 423

At a large organization using Junos route reflectors, a Junos specialist investigates this scenario: Two external BGP routers are separated by intermediate routed devices and an ordinary directly connected peering does not work. The change must not introduce an unwanted autonomous-system route leak. Which technical mechanism most directly explains the symptom?

  1. BGP AS-path loop detection normally prevents accepting routes already traversing the local autonomous system.
  2. BGP export policy controls which eligible active routes the speaker announces to selected neighbors.
  3. A nonadjacent eBGP neighbor may require a compatible multihop TTL and suitable route to the remote endpoint.
  4. Junos route filters distinguish exact matching from longer or longer-prefix patterns.

Explanation

Correct Answer

C:

For a large organization using Junos route reflectors, the governing mechanism is: A nonadjacent eBGP neighbor may require a compatible multihop TTL and suitable route to the remote endpoint. It explains the reported symptom: Two external BGP routers are separated by intermediate routed devices and an ordinary directly connected peering does not work. The intended response is: Configure supported eBGP multihop behavior and reliable local-address selection for the approved peer. Verification: The multi-hop session establishes and uses the intended loopback source and destination.

Incorrect Answers

A:

BGP AS-path loop detection normally prevents accepting routes already traversing the local autonomous system. This alternative mechanism does not match the current fault.

B:

BGP export policy controls which eligible active routes the speaker announces to selected neighbors. Fixing that different mechanism would not address the current root cause: a nonadjacent eBGP neighbor may require a compatible multihop TTL and suitable route to the remote endpoint.

D:

Junos route filters distinguish exact matching from longer or longer-prefix patterns. Its verification is distinct from the reported condition: Two external BGP routers are separated by intermediate routed devices and an ordinary directly connected peering does not work. The change must not introduce an unwanted autonomous-system route leak.

Question 424

At a branch router serving several application classes, a Junos specialist investigates this scenario: Two traffic types share a forwarding class but one must be dropped earlier during sustained congestion. The team must validate packet drops by actual queue statistics. What verification result should the engineer expect?

  1. Voice queue delay remains within the target while lower classes still receive required service.
  2. Queue counters show the intended class receives its planned share during a controlled load.
  3. Aggregate throughput stays under the circuit limit while class queues meet their intended bandwidth shares.
  4. Under load the less-important traffic experiences expected earlier drops while protected traffic is retained.

Explanation

Correct Answer

D:

For a branch router serving several application classes, the decisive evidence is: Under load the less-important traffic experiences expected earlier drops while protected traffic is retained. This validates the action: Mark the appropriate lower-value traffic with a higher packet-loss priority through supported classification. Because: Junos packet-loss priority provides an additional attribute for drop-profile selection under queue pressure. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

A:

A scheduler can prioritize selected latency-sensitive queues over other queues when the interface is congested. The appropriate correction for the reported case is: Mark the appropriate lower-value traffic with a higher packet-loss priority through supported classification.

B:

Junos schedulers control bandwidth allocation among queues using configured transmission rates and priorities. Fixing that different mechanism would not address the current root cause: junos packet-loss priority provides an additional attribute for drop-profile selection under queue pressure.

C:

Hierarchical CoS policies coordinate parent traffic shaping with child class queues or scheduler allocation where supported. Its verification is distinct from the reported condition: Two traffic types share a forwarding class but one must be dropped earlier during sustained congestion. The team must validate packet drops by actual queue statistics.

Question 425

At a campus distributing IP video to several buildings, a Junos specialist investigates this scenario: An engineer tries to assign a unicast destination to represent a one-to-many IPv4 video channel. The group traffic must reach interested receivers without flooding other locations. What verification result should the engineer expect?

  1. Subscribers join the selected multicast group and receive matching test packets.
  2. Routers learn the expected RP mapping and group traffic builds a valid shared tree.
  3. show msdp source-active shows a known source and receivers on the other RP reach it.
  4. show multicast route or PIM state contains the planned source-group combination.

Explanation

Correct Answer

A:

For a campus distributing IP video to several buildings, the decisive evidence is: Subscribers join the selected multicast group and receive matching test packets. This validates the action: Allocate an appropriate multicast group address in a scope permitted for the enterprise distribution. Because: IPv4 multicast traffic uses group addresses from 224.0.0.0 through 239.255.255.255 rather than ordinary unicast host destinations. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

B:

PIM bootstrap router mechanisms can advertise eligible RP information to routers in the multicast domain. The appropriate correction for the reported case is: Allocate an appropriate multicast group address in a scope permitted for the enterprise distribution.

C:

Multicast Source Discovery Protocol communicates source-active information between supported RPs. Fixing that different mechanism would not address the current root cause: IPv4 multicast traffic uses group addresses from 224.0.0.0 through 239.255.255.255 rather than ordinary unicast host destinations.

D:

(S,G) multicast state identifies one particular source S and destination group G. Its verification is distinct from the reported condition: An engineer tries to assign a unicast destination to represent a one-to-many IPv4 video channel. The group traffic must reach interested receivers without flooding other locations.

Question 426

At a congested enterprise WAN carrying video, voice and backups, a Junos specialist investigates this scenario: Voice packets arrive without reliable DSCP markings but their source and application characteristics can be matched. The network must keep critical application latency within policy. What important rollout safeguard is most relevant here?

  1. Do not trust unverified DSCP values from arbitrary user-controlled ports.
  2. Review fragment behavior and protocol matches before relying on broad address-only conditions.
  3. Do not increase burst allowances so far that the downstream circuit is overwhelmed.
  4. Do not infer an absence of congestion from a low five-minute average utilization value alone.

Explanation

Correct Answer

B:

For a congested enterprise WAN carrying video, voice and backups, the relevant safeguard is: Review fragment behavior and protocol matches before relying on broad address-only conditions. It matters while implementing: Create a narrowly matched classifier filter and apply it at the correct ingress logical interface. The fault involves: A multifield firewall filter can classify selected packets using header fields and set an appropriate forwarding class. The required acceptance result remains: A representative phone flow enters the chosen forwarding class while ordinary traffic remains best effort.

Incorrect Answers

A:

A behavior aggregate classifier maps incoming codepoint values to local forwarding class and loss priority. The appropriate correction for the reported case is: Review fragment behavior and protocol matches before relying on broad address-only conditions.

C:

Rate policers use token or burst parameters that influence which short bursts are considered conformant. Fixing that different mechanism would not address the current root cause: a multifield firewall filter can classify selected packets using header fields and set an appropriate forwarding class.

D:

Per-queue counters reveal forwarding class use, transmission and discard behavior during congestion. Its verification is distinct from the reported condition: Voice packets arrive without reliable DSCP markings but their source and application characteristics can be matched. The network must keep critical application latency within policy.

Question 427

At a large enterprise updating redundant switch links, a Junos specialist investigates this scenario: Two VLANs need different active Layer 2 paths but use one common spanning-tree root everywhere. The change must retain both link resilience and correct VLAN isolation. Which technical mechanism most directly explains the symptom?

  1. Adding an outer VLAN tag increases Ethernet frame size and may exceed an interface's supported MTU.
  2. Spanning tree prevents bridging loops by keeping appropriate redundant ports in nondesignated states.
  3. VLAN Spanning Tree Protocol allows separate tree instances for selected VLANs and can choose different roots.
  4. An untagged Ethernet access port places endpoint traffic into its configured access VLAN.

Explanation

Correct Answer

C:

For a large enterprise updating redundant switch links, the governing mechanism is: VLAN Spanning Tree Protocol allows separate tree instances for selected VLANs and can choose different roots. It explains the reported symptom: Two VLANs need different active Layer 2 paths but use one common spanning-tree root everywhere. The intended response is: Configure supported VSTP membership and root priorities for the chosen VLANs. Verification: Each VLAN shows the intended root and blocked ports without creating a loop.

Incorrect Answers

A:

Adding an outer VLAN tag increases Ethernet frame size and may exceed an interface's supported MTU. This alternative mechanism does not match the current fault.

B:

Spanning tree prevents bridging loops by keeping appropriate redundant ports in nondesignated states. Fixing that different mechanism would not address the current root cause: VLAN Spanning Tree Protocol allows separate tree instances for selected VLANs and can choose different roots.

D:

An untagged Ethernet access port places endpoint traffic into its configured access VLAN. Its verification is distinct from the reported condition: Two VLANs need different active Layer 2 paths but use one common spanning-tree root everywhere. The change must retain both link resilience and correct VLAN isolation.

Question 428

At a healthcare organization connecting redundant facilities, a Junos specialist investigates this scenario: Routers report Full neighbors but one route is missing and technicians only inspect the forwarding table. The correction must not expose administrative network prefixes. What protocol behavior accounts for this failure?

  1. On broadcast multiaccess networks OSPF elects a designated router and backup designated router to manage adjacencies.
  2. OSPF interarea routing normally relies on connectivity through area 0 and correctly placed area border routers.
  3. A not-so-stubby area allows local external routes using type-7 LSAs and an ABR can translate them toward other areas.
  4. The link-state database and area LSA contents determine which routes the OSPF calculation can derive.

Explanation

Correct Answer

D:

For a healthcare organization connecting redundant facilities, the governing mechanism is: The link-state database and area LSA contents determine which routes the OSPF calculation can derive. It explains the reported symptom: Routers report Full neighbors but one route is missing and technicians only inspect the forwarding table. The intended response is: Compare show ospf database and LSAs against the intended origin and area boundaries. Verification: The missing prefix is visible in an appropriate LSA and the downstream route becomes active.

Incorrect Answers

A:

On broadcast multiaccess networks OSPF elects a designated router and backup designated router to manage adjacencies. This alternative mechanism does not match the current fault.

B:

OSPF interarea routing normally relies on connectivity through area 0 and correctly placed area border routers. Fixing that different mechanism would not address the current root cause: the link-state database and area LSA contents determine which routes the OSPF calculation can derive.

C:

A not-so-stubby area allows local external routes using type-7 LSAs and an ABR can translate them toward other areas. Its verification is distinct from the reported condition: Routers report Full neighbors but one route is missing and technicians only inspect the forwarding table. The correction must not expose administrative network prefixes.

Question 429

At a regional provider operating Junos-based branch routers, a Junos specialist investigates this scenario: An ABR leaks a sensitive or unwanted interarea prefix despite intended area filtering. The team must validate neighbor state rather than assume basic IP reachability proves routing. What protocol behavior accounts for this failure?

  1. OSPF interarea summary-LSA generation can be governed with supported routing policies on ABRs.
  2. A not-so-stubby area allows local external routes using type-7 LSAs and an ABR can translate them toward other areas.
  3. Junos requires a suitable route export policy to originate eligible non-OSPFv3 routes.
  4. Junos first chooses active routing-table entries using protocol route preference before forwarding installation.

Explanation

Correct Answer

A:

For a regional provider operating Junos-based branch routers, the governing mechanism is: OSPF interarea summary-LSA generation can be governed with supported routing policies on ABRs. It explains the reported symptom: An ABR leaks a sensitive or unwanted interarea prefix despite intended area filtering. The intended response is: Apply a targeted interarea summarization or route-control policy at the correct OSPF hierarchy. Verification: show ospf database and downstream routes reflect only the approved summaries.

Incorrect Answers

B:

A not-so-stubby area allows local external routes using type-7 LSAs and an ABR can translate them toward other areas. This alternative mechanism does not match the current fault.

C:

Junos requires a suitable route export policy to originate eligible non-OSPFv3 routes. Fixing that different mechanism would not address the current root cause: OSPF interarea summary-LSA generation can be governed with supported routing policies on ABRs.

D:

Junos first chooses active routing-table entries using protocol route preference before forwarding installation. Its verification is distinct from the reported condition: An ABR leaks a sensitive or unwanted interarea prefix despite intended area filtering. The team must validate neighbor state rather than assume basic IP reachability proves routing.

Question 430

At a regional provider operating Junos-based branch routers, a Junos specialist investigates this scenario: An adjacency flaps sporadically and ordinary summary commands do not explain the event sequence. The team must validate neighbor state rather than assume basic IP reachability proves routing. Which operational result would most clearly confirm the fix?

  1. The missing prefix is visible in an appropriate LSA and the downstream route becomes active.
  2. Trace messages show the relevant neighbor-state transition and correction removes the repeat failure.
  3. The virtual link reaches the expected operational state and the remote area receives backbone routes.
  4. An IPv6 destination installs with an expected link-local next hop and forwards successfully.

Explanation

Correct Answer

B:

For a regional provider operating Junos-based branch routers, the decisive evidence is: Trace messages show the relevant neighbor-state transition and correction removes the repeat failure. This validates the action: Enable limited OSPF traceoptions with bounded logging, capture the failure and remove them afterward. Because: Junos routing traceoptions can record protocol events for focused diagnosis when enabled carefully. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

A:

The link-state database and area LSA contents determine which routes the OSPF calculation can derive. The appropriate correction for the reported case is: Enable limited OSPF traceoptions with bounded logging, capture the failure and remove them afterward.

C:

A supported OSPF virtual link can logically extend the backbone through a nonstub transit area between eligible ABRs. Fixing that different mechanism would not address the current root cause: junos routing traceoptions can record protocol events for focused diagnosis when enabled carefully.

D:

OSPFv3 neighbor exchanges and next-hop forwarding commonly use IPv6 link-local addresses on the adjoining link. Its verification is distinct from the reported condition: An adjacency flaps sporadically and ordinary summary commands do not explain the event sequence. The team must validate neighbor state rather than assume basic IP reachability proves routing.

Enterprise Routing and Switching, Professional (JNCIP-ENT) (JN0-650) Practice Tests