mcAfee Secure Website
exam =5
exam =6

Exam Code: JN0-650

Exam Name: Enterprise Routing and Switching, Professional (JNCIP-ENT)

Certification Provider: Juniper

Corresponding Certification: JNCIP-ENT

Juniper JN0-650 Questions & Answers

Reliable & Actual Study Materials for JN0-650 Exam Success

107 Questions & Answers with Testing Engine

"JN0-650: Enterprise Routing and Switching, Professional (JNCIP-ENT)" Testing Engine covers all the knowledge points of the real Juniper JN0-650 exam.

The latest actual JN0-650 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at JN0-650 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Juniper Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Juniper JN0-650 Practice Test 2

Question 10

At a regional provider operating Junos-based branch routers, a Junos specialist investigates this scenario: An ABR leaks a sensitive or unwanted interarea prefix despite intended area filtering. The team must validate neighbor state rather than assume basic IP reachability proves routing. Which configuration adjustment should be made first to address this issue?

  1. Match the intended IPv6 static route in a scoped export policy under the OSPFv3 process.
  2. Apply a targeted interarea summarization or route-control policy at the correct OSPF hierarchy.
  3. Apply the policy at the hierarchy appropriate to redistribution rather than assuming import creates advertisements.
  4. Enable limited OSPF traceoptions with bounded logging, capture the failure and remove them afterward.

Explanation

Correct Answer

B:

For a regional provider operating Junos-based branch routers, the direct corrective action is: Apply a targeted interarea summarization or route-control policy at the correct OSPF hierarchy. This addresses the mechanism: OSPF interarea summary-LSA generation can be governed with supported routing policies on ABRs. Confirm by checking: show ospf database and downstream routes reflect only the approved summaries. During rollout, distinguish topology LSAs from summary policy to avoid accidental intra-area isolation.

Incorrect Answers

A:

Junos requires a suitable route export policy to originate eligible non-OSPFv3 routes. The appropriate correction for the reported case is: Apply a targeted interarea summarization or route-control policy at the correct OSPF hierarchy.

C:

Junos OSPF export governs eligible external route origination while import filtering has different route-selection effects. Fixing that different mechanism would not address the current root cause: OSPF interarea summary-LSA generation can be governed with supported routing policies on ABRs.

D:

Junos routing traceoptions can record protocol events for focused diagnosis when enabled carefully. Its verification is distinct from the reported condition: An ABR leaks a sensitive or unwanted interarea prefix despite intended area filtering. The team must validate neighbor state rather than assume basic IP reachability proves routing.

Question 11

At a healthcare organization connecting redundant facilities, a Junos specialist investigates this scenario: A shared Ethernet OSPF segment has more adjacencies than planned and the chosen designated router is unsuitable. The correction must not expose administrative network prefixes. What risk must the implementation avoid?

  1. Avoid shortening dead timers without checking CPU load and adjacent platform support.
  2. Avoid originating a default to a dead WAN without route tracking or failover planning.
  3. Avoid forcing DR changes during production without considering adjacency churn.
  4. Distinguish topology LSAs from summary policy to avoid accidental intra-area isolation.

Explanation

Correct Answer

C:

For a healthcare organization connecting redundant facilities, the relevant safeguard is: Avoid forcing DR changes during production without considering adjacency churn. It matters while implementing: Review interface priority and network type so appropriate eligible routers become DR and BDR. The fault involves: On broadcast multiaccess networks OSPF elects a designated router and backup designated router to manage adjacencies. The required acceptance result remains: show ospf neighbor shows the intended DR and BDR roles and stable adjacency states.

Incorrect Answers

A:

Neighbor compatibility depends on matching Hello and dead intervals for the participating link. The appropriate correction for the reported case is: Avoid forcing DR changes during production without considering adjacency churn.

B:

A scoped OSPF default-route export can advertise 0.0.0.0/0 when the default is valid. Fixing that different mechanism would not address the current root cause: on broadcast multiaccess networks OSPF elects a designated router and backup designated router to manage adjacencies.

D:

OSPF interarea summary-LSA generation can be governed with supported routing policies on ABRs. Its verification is distinct from the reported condition: A shared Ethernet OSPF segment has more adjacencies than planned and the chosen designated router is unsuitable. The correction must not expose administrative network prefixes.

Question 12

At a provider Ethernet network carrying customer Layer 2 services, a Junos specialist investigates this scenario: Several tenant endpoints must reach a gateway but must not exchange Layer 2 traffic with each other. The service must preserve tags without bridging unrelated tenants. Which technical mechanism most directly explains the symptom?

  1. Loop protection helps guard against unsafe port state changes when expected spanning-tree BPDUs disappear.
  2. Private VLAN community ports support intra-community traffic while preventing communication with other communities.
  3. MSTP region membership depends on compatible region name, revision and VLAN-to-instance mapping digest.
  4. Private VLAN isolated ports restrict communication with peer isolated ports while allowing designated promiscuous connectivity.

Explanation

Correct Answer

D:

For a provider Ethernet network carrying customer Layer 2 services, the governing mechanism is: Private VLAN isolated ports restrict communication with peer isolated ports while allowing designated promiscuous connectivity. It explains the reported symptom: Several tenant endpoints must reach a gateway but must not exchange Layer 2 traffic with each other. The intended response is: Map the isolated ports to the private VLAN design and configure the approved gateway-facing port. Verification: Two isolated test devices cannot communicate directly but each can reach the authorized gateway.

Incorrect Answers

A:

Loop protection helps guard against unsafe port state changes when expected spanning-tree BPDUs disappear. This alternative mechanism does not match the current fault.

B:

Private VLAN community ports support intra-community traffic while preventing communication with other communities. Fixing that different mechanism would not address the current root cause: private VLAN isolated ports restrict communication with peer isolated ports while allowing designated promiscuous connectivity.

C:

MSTP region membership depends on compatible region name, revision and VLAN-to-instance mapping digest. Its verification is distinct from the reported condition: Several tenant endpoints must reach a gateway but must not exchange Layer 2 traffic with each other. The service must preserve tags without bridging unrelated tenants.

Question 13

At a live-event venue using routed multicast streaming, a Junos specialist investigates this scenario: A receiver knows the multicast publisher IP but unnecessary RP dependencies delay traffic setup. The change must preserve source identity and avoid multicast loops. Which response best restores the intended behavior?

  1. Use an approved SSM group and source-aware receiver membership with compatible PIM behavior.
  2. Enable appropriate IGMP processing on the receiver VLAN and validate group membership reports.
  3. Match and reject the prohibited source-group combinations with a suitable Junos multicast policy.
  4. Inspect the source and group state to diagnose the correct sender-specific distribution tree.

Explanation

Correct Answer

A:

For a live-event venue using routed multicast streaming, the direct corrective action is: Use an approved SSM group and source-aware receiver membership with compatible PIM behavior. This addresses the mechanism: Source-specific multicast uses explicit (S,G) interests and does not require an ASM rendezvous point. Confirm by checking: Only packets from the selected source reach receivers of that SSM group. During rollout, check IGMPv3 support and SSM address-range policy before switching away from ASM.

Incorrect Answers

B:

IGMP membership reports convey IPv4 receiver interest from hosts to their local multicast router. The appropriate correction for the reported case is: Use an approved SSM group and source-aware receiver membership with compatible PIM behavior.

C:

PIM and multicast routing policy can be applied to limit permitted source and group reachability. Fixing that different mechanism would not address the current root cause: source-specific multicast uses explicit (S,G) interests and does not require an ASM rendezvous point.

D:

(S,G) multicast state identifies one particular source S and destination group G. Its verification is distinct from the reported condition: A receiver knows the multicast publisher IP but unnecessary RP dependencies delay traffic setup. The change must preserve source identity and avoid multicast loops.

Question 14

At a congested enterprise WAN carrying video, voice and backups, a Junos specialist investigates this scenario: Engineers change a DSCP rewrite rule expecting packets to move into a different local output queue. The network must keep critical application latency within policy. Which configuration adjustment should be made first to address this issue?

  1. Map approved voice traffic to an appropriate expedited-forwarding class and backups to a suitable lower class.
  2. Fix the relevant ingress classifier or multifield policy rather than only rewriting outgoing DSCP.
  3. Apply a suitable RED or weighted drop profile through the appropriate scheduler.
  4. Assign appropriate scheduler transmit-rate settings for the required class and validate link capacity.

Explanation

Correct Answer

B:

For a congested enterprise WAN carrying video, voice and backups, the direct corrective action is: Fix the relevant ingress classifier or multifield policy rather than only rewriting outgoing DSCP. This addresses the mechanism: Classification determines internal forwarding class while rewrite rules modify markings on outgoing packets. Confirm by checking: Queue counters show the intended internal class and egress capture shows appropriate markings. During rollout, check both classification and rewrite stages because they solve different problems.

Incorrect Answers

A:

Junos Class of Service uses forwarding classes to group packets for selected queuing and scheduling behavior. The appropriate correction for the reported case is: Fix the relevant ingress classifier or multifield policy rather than only rewriting outgoing DSCP.

C:

A Junos drop profile can define queue occupancy thresholds and drop probabilities before absolute congestion. Fixing that different mechanism would not address the current root cause: classification determines internal forwarding class while rewrite rules modify markings on outgoing packets.

D:

Junos schedulers control bandwidth allocation among queues using configured transmission rates and priorities. Its verification is distinct from the reported condition: Engineers change a DSCP rewrite rule expecting packets to move into a different local output queue. The network must keep critical application latency within policy.

Question 15

At a campus distributing IP video to several buildings, a Junos specialist investigates this scenario: An engineer tries to assign a unicast destination to represent a one-to-many IPv4 video channel. The group traffic must reach interested receivers without flooding other locations. What is the most likely design-related cause?

  1. In PIM sparse-mode ASM, a first-hop designated router can register new source traffic with the RP.
  2. PIM routers discover routing neighbors on participating interfaces through PIM Hello exchanges.
  3. IPv4 multicast traffic uses group addresses from 224.0.0.0 through 239.255.255.255 rather than ordinary unicast host destinations.
  4. (S,G) multicast state identifies one particular source S and destination group G.

Explanation

Correct Answer

C:

For a campus distributing IP video to several buildings, the governing mechanism is: IPv4 multicast traffic uses group addresses from 224.0.0.0 through 239.255.255.255 rather than ordinary unicast host destinations. It explains the reported symptom: An engineer tries to assign a unicast destination to represent a one-to-many IPv4 video channel. The intended response is: Allocate an appropriate multicast group address in a scope permitted for the enterprise distribution. Verification: Subscribers join the selected multicast group and receive matching test packets.

Incorrect Answers

A:

In PIM sparse-mode ASM, a first-hop designated router can register new source traffic with the RP. This alternative mechanism does not match the current fault.

B:

PIM routers discover routing neighbors on participating interfaces through PIM Hello exchanges. Fixing that different mechanism would not address the current root cause: IPv4 multicast traffic uses group addresses from 224.0.0.0 through 239.255.255.255 rather than ordinary unicast host destinations.

D:

(S,G) multicast state identifies one particular source S and destination group G. Its verification is distinct from the reported condition: An engineer tries to assign a unicast destination to represent a one-to-many IPv4 video channel. The group traffic must reach interested receivers without flooding other locations.

Question 16

At a regional provider operating Junos-based branch routers, a Junos specialist investigates this scenario: A remote router selects an external OSPF path unexpectedly because external metrics are compared differently. The team must validate neighbor state rather than assume basic IP reachability proves routing. When would the described mechanism be appropriate?

  1. Use protocol route preference to explain cross-protocol RIB active-route choice.
  2. Use OSPF point-to-point network type on an isolated two-router link.
  3. Use consistent link MTU to complete OSPF database-description synchronization.
  4. Prefer type-1 external metrics where internal distance to the ASBR must influence selection.

Explanation

Correct Answer

D:

For a regional provider operating Junos-based branch routers, this mechanism fits the requirement: Prefer type-1 external metrics where internal distance to the ASBR must influence selection. The design is appropriate because: Type-1 external OSPF cost includes internal cost to the ASBR while type-2 primarily uses the external metric for selection. In this scenario, the observed issue is: A remote router selects an external OSPF path unexpectedly because external metrics are compared differently. The corresponding implementation is: Choose the intended external metric type for the redistributed prefix and validate path selection.

Incorrect Answers

A:

Junos first chooses active routing-table entries using protocol route preference before forwarding installation. The appropriate correction for the reported case is: Choose the intended external metric type for the redistributed prefix and validate path selection.

B:

OSPF interface network type influences neighbor formation and whether DR and BDR election is used. Fixing that different mechanism would not address the current root cause: type-1 external OSPF cost includes internal cost to the ASBR while type-2 primarily uses the external metric for selection.

C:

Database-description exchange can fail when peers disagree on the IP MTU for a common OSPF link. Its verification is distinct from the reported condition: A remote router selects an external OSPF path unexpectedly because external metrics are compared differently. The team must validate neighbor state rather than assume basic IP reachability proves routing. When would the described mechanism be appropriate.

Question 17

At a campus distributing IP video to several buildings, a Junos specialist investigates this scenario: A multicast video stream floods every port in a VLAN although only two receivers joined. The group traffic must reach interested receivers without flooding other locations. What protocol behavior accounts for this failure?

  1. IGMP snooping lets a Layer 2 switch learn interested receiver ports and limit multicast flooding within a VLAN.
  2. IGMP membership maintenance relies on periodic queries from a suitable multicast querier.
  3. PIM-SM can transition selected traffic from an RP-rooted shared tree to a source-rooted shortest-path tree.
  4. (S,G) multicast state identifies one particular source S and destination group G.

Explanation

Correct Answer

A:

For a campus distributing IP video to several buildings, the governing mechanism is: IGMP snooping lets a Layer 2 switch learn interested receiver ports and limit multicast flooding within a VLAN. It explains the reported symptom: A multicast video stream floods every port in a VLAN although only two receivers joined. The intended response is: Configure supported IGMP snooping and verify a reachable multicast-router port in the receiver VLAN. Verification: Only joined receiver ports receive the test multicast frames during stable operation.

Incorrect Answers

B:

IGMP membership maintenance relies on periodic queries from a suitable multicast querier. This alternative mechanism does not match the current fault.

C:

PIM-SM can transition selected traffic from an RP-rooted shared tree to a source-rooted shortest-path tree. Fixing that different mechanism would not address the current root cause: IGMP snooping lets a Layer 2 switch learn interested receiver ports and limit multicast flooding within a VLAN.

D:

(S,G) multicast state identifies one particular source S and destination group G. Its verification is distinct from the reported condition: A multicast video stream floods every port in a VLAN although only two receivers joined. The group traffic must reach interested receivers without flooding other locations.

Question 18

At a provider Ethernet network carrying customer Layer 2 services, a Junos specialist investigates this scenario: A user plugs a small switch into a campus edge port and introduces unexpected spanning-tree control traffic. The service must preserve tags without bridging unrelated tenants. Which underlying distinction should guide troubleshooting?

  1. Multiple VLAN Registration Protocol exchanges VLAN registration information between participating bridged devices.
  2. BPDU protection can prevent an edge interface from accepting unauthorized bridge control messages.
  3. An untagged Ethernet access port places endpoint traffic into its configured access VLAN.
  4. Private VLAN isolated ports restrict communication with peer isolated ports while allowing designated promiscuous connectivity.

Explanation

Correct Answer

B:

For a provider Ethernet network carrying customer Layer 2 services, the governing mechanism is: BPDU protection can prevent an edge interface from accepting unauthorized bridge control messages. It explains the reported symptom: A user plugs a small switch into a campus edge port and introduces unexpected spanning-tree control traffic. The intended response is: Enable the supported BPDU protection behavior on designated host-facing ports. Verification: A controlled received-BPDU test produces the expected protective state and alert.

Incorrect Answers

A:

Multiple VLAN Registration Protocol exchanges VLAN registration information between participating bridged devices. This alternative mechanism does not match the current fault.

C:

An untagged Ethernet access port places endpoint traffic into its configured access VLAN. Fixing that different mechanism would not address the current root cause: BPDU protection can prevent an edge interface from accepting unauthorized bridge control messages.

D:

Private VLAN isolated ports restrict communication with peer isolated ports while allowing designated promiscuous connectivity. Its verification is distinct from the reported condition: A user plugs a small switch into a campus edge port and introduces unexpected spanning-tree control traffic. The service must preserve tags without bridging unrelated tenants.

Question 19

At a multimedia training network running Junos multicast routers, a Junos specialist investigates this scenario: Hosts need one multicast source in a group but IGMPv2 membership cannot express the chosen source. The corrected tree must respect source and group authorization. Which response best restores the intended behavior?

  1. Inspect the source and group state to diagnose the correct sender-specific distribution tree.
  2. Enable compatible sparse-mode PIM and verify receiver-driven upstream join signaling.
  3. Enable supported IGMPv3 processing and make hosts join the approved source-group pair.
  4. Inspect multicast route, upstream interface and output interface list for the failed group.

Explanation

Correct Answer

C:

For a multimedia training network running Junos multicast routers, the direct corrective action is: Enable supported IGMPv3 processing and make hosts join the approved source-group pair. This addresses the mechanism: IGMPv3 membership records can identify source filters that enable explicit SSM interest. Confirm by checking: show igmp group displays the intended source filter and unwanted senders do not reach the host. During rollout, validate host and switch feature support before relying on source filtering.

Incorrect Answers

A:

(S,G) multicast state identifies one particular source S and destination group G. The appropriate correction for the reported case is: Enable supported IGMPv3 processing and make hosts join the approved source-group pair.

B:

PIM sparse mode builds multicast forwarding paths in response to explicit joins rather than flooding everywhere. Fixing that different mechanism would not address the current root cause: IGMPv3 membership records can identify source filters that enable explicit SSM interest.

D:

Multicast forwarding depends on per-group and per-source route state in addition to host membership. Its verification is distinct from the reported condition: Hosts need one multicast source in a group but IGMPv2 membership cannot express the chosen source. The corrected tree must respect source and group authorization.

Question 20

At a financial services network enforcing trusted DSCP markings, a Junos specialist investigates this scenario: Junos CoS classifiers and schedulers are configured but packets continue to use unexpected default queues. Classification and downstream remarking must not be confused. Which technical mechanism most directly explains the symptom?

  1. A multifield firewall filter can classify selected packets using header fields and set an appropriate forwarding class.
  2. A Junos drop profile can define queue occupancy thresholds and drop probabilities before absolute congestion.
  3. Junos schedulers control bandwidth allocation among queues using configured transmission rates and priorities.
  4. A scheduler map must be associated with the appropriate interface for selected class-to-scheduler behavior.

Explanation

Correct Answer

D:

For a financial services network enforcing trusted DSCP markings, the governing mechanism is: A scheduler map must be associated with the appropriate interface for selected class-to-scheduler behavior. It explains the reported symptom: Junos CoS classifiers and schedulers are configured but packets continue to use unexpected default queues. The intended response is: Attach the intended scheduler map to the correct supported egress interface. Verification: Interface queue statistics reflect the configured scheduler allocation under test.

Incorrect Answers

A:

A multifield firewall filter can classify selected packets using header fields and set an appropriate forwarding class. This alternative mechanism does not match the current fault.

B:

A Junos drop profile can define queue occupancy thresholds and drop probabilities before absolute congestion. Fixing that different mechanism would not address the current root cause: a scheduler map must be associated with the appropriate interface for selected class-to-scheduler behavior.

C:

Junos schedulers control bandwidth allocation among queues using configured transmission rates and priorities. Its verification is distinct from the reported condition: Junos CoS classifiers and schedulers are configured but packets continue to use unexpected default queues. Classification and downstream remarking must not be confused.

Enterprise Routing and Switching, Professional (JNCIP-ENT) (JN0-650) Practice Tests