mcAfee Secure Website
exam =5
exam =6

Exam Code: JN0-650

Exam Name: Enterprise Routing and Switching, Professional (JNCIP-ENT)

Certification Provider: Juniper

Corresponding Certification: JNCIP-ENT

Juniper JN0-650 Questions & Answers

Reliable & Actual Study Materials for JN0-650 Exam Success

107 Questions & Answers with Testing Engine

"JN0-650: Enterprise Routing and Switching, Professional (JNCIP-ENT)" Testing Engine covers all the knowledge points of the real Juniper JN0-650 exam.

The latest actual JN0-650 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at JN0-650 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Juniper Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Juniper JN0-650 Practice Test 32

Question 310

At a dual-homed business network peering with two upstream providers, a Junos specialist investigates this scenario: A route filter intended to allow a single aggregate accidentally accepts many more-specific customer prefixes. The routing policy must retain intended primary and backup paths. What protocol behavior accounts for this failure?

  1. In Junos BGP best-path selection an eligible shorter AS path is generally preferred after higher-priority criteria tie.
  2. Junos route filters distinguish exact matching from longer or longer-prefix patterns.
  3. BGP export policy controls which eligible active routes the speaker announces to selected neighbors.
  4. A BGP prefix-limit control detects or constrains excessive received NLRI from a peer.

Explanation

Correct Answer

B:

For a dual-homed business network peering with two upstream providers, the governing mechanism is: Junos route filters distinguish exact matching from longer or longer-prefix patterns. It explains the reported symptom: A route filter intended to allow a single aggregate accidentally accepts many more-specific customer prefixes. The intended response is: Choose exact or bounded prefix-length matching appropriate to the advertisement contract. Verification: Only intended prefix lengths pass the import or export policy.

Incorrect Answers

A:

In Junos BGP best-path selection an eligible shorter AS path is generally preferred after higher-priority criteria tie. This alternative mechanism does not match the current fault.

C:

BGP export policy controls which eligible active routes the speaker announces to selected neighbors. Fixing that different mechanism would not address the current root cause: junos route filters distinguish exact matching from longer or longer-prefix patterns.

D:

A BGP prefix-limit control detects or constrains excessive received NLRI from a peer. Its verification is distinct from the reported condition: A route filter intended to allow a single aggregate accidentally accepts many more-specific customer prefixes. The routing policy must retain intended primary and backup paths.

Question 311

At a provider Ethernet network carrying customer Layer 2 services, a Junos specialist investigates this scenario: Isolated private VLAN endpoints can reach neither each other nor the legitimate default gateway. The service must preserve tags without bridging unrelated tenants. Which configuration adjustment should be made first to address this issue?

  1. Configure supported spanning-tree root protection on the relevant downstream boundary.
  2. Apply suitable storm-control thresholds to the affected edge ports.
  3. Configure the gateway-facing port with proper promiscuous association for the private VLAN topology.
  4. Map the isolated ports to the private VLAN design and configure the approved gateway-facing port.

Explanation

Correct Answer

C:

For a provider Ethernet network carrying customer Layer 2 services, the direct corrective action is: Configure the gateway-facing port with proper promiscuous association for the private VLAN topology. This addresses the mechanism: Private VLAN promiscuous ports can communicate with applicable secondary VLAN ports, providing a shared exit. Confirm by checking: Isolated and community hosts reach the shared gateway while tenant-to-tenant restrictions remain. During rollout, verify secondary-to-primary mappings on each switch in a multichassis deployment.

Incorrect Answers

A:

Root protection can prevent a specified port from accepting an unexpected superior root advertisement. The appropriate correction for the reported case is: Configure the gateway-facing port with proper promiscuous association for the private VLAN topology.

B:

Layer 2 storm control limits specified excessive broadcast or multicast traffic on a port. Fixing that different mechanism would not address the current root cause: private VLAN promiscuous ports can communicate with applicable secondary VLAN ports, providing a shared exit.

D:

Private VLAN isolated ports restrict communication with peer isolated ports while allowing designated promiscuous connectivity. Its verification is distinct from the reported condition: Isolated private VLAN endpoints can reach neither each other nor the legitimate default gateway. The service must preserve tags without bridging unrelated tenants.

Question 312

At a branch router serving several application classes, a Junos specialist investigates this scenario: A provider supplies correctly DSCP-marked packets but the Junos edge handles all traffic as best effort. The team must validate packet drops by actual queue statistics. Which underlying distinction should guide troubleshooting?

  1. Per-queue counters reveal forwarding class use, transmission and discard behavior during congestion.
  2. A multifield firewall filter can classify selected packets using header fields and set an appropriate forwarding class.
  3. Junos packet-loss priority provides an additional attribute for drop-profile selection under queue pressure.
  4. A behavior aggregate classifier maps incoming codepoint values to local forwarding class and loss priority.

Explanation

Correct Answer

D:

For a branch router serving several application classes, the governing mechanism is: A behavior aggregate classifier maps incoming codepoint values to local forwarding class and loss priority. It explains the reported symptom: A provider supplies correctly DSCP-marked packets but the Junos edge handles all traffic as best effort. The intended response is: Attach the appropriate DSCP BA classifier to the trusted ingress interface. Verification: Packets with the approved DSCP values enter the expected forwarding queues.

Incorrect Answers

A:

Per-queue counters reveal forwarding class use, transmission and discard behavior during congestion. This alternative mechanism does not match the current fault.

B:

A multifield firewall filter can classify selected packets using header fields and set an appropriate forwarding class. Fixing that different mechanism would not address the current root cause: a behavior aggregate classifier maps incoming codepoint values to local forwarding class and loss priority.

C:

Junos packet-loss priority provides an additional attribute for drop-profile selection under queue pressure. Its verification is distinct from the reported condition: A provider supplies correctly DSCP-marked packets but the Junos edge handles all traffic as best effort. The team must validate packet drops by actual queue statistics.

Question 313

At a national enterprise designing OSPF between offices, a Junos specialist investigates this scenario: An ABR leaks a sensitive or unwanted interarea prefix despite intended area filtering. The internal forwarding path must remain stable when one uplink fails. For which use case is this feature the best match?

  1. Use OSPF ABR summary policy to control which interarea prefixes propagate.
  2. Use OSPF authentication to control trusted routing neighbors on supported links.
  3. Use NSSA when a limited external-route origin must exist inside an OSPF area.
  4. Use OSPFv3 export policy for approved external IPv6 reachability.

Explanation

Correct Answer

A:

For a national enterprise designing OSPF between offices, this mechanism fits the requirement: Use OSPF ABR summary policy to control which interarea prefixes propagate. The design is appropriate because: OSPF interarea summary-LSA generation can be governed with supported routing policies on ABRs. In this scenario, the observed issue is: An ABR leaks a sensitive or unwanted interarea prefix despite intended area filtering. The corresponding implementation is: Apply a targeted interarea summarization or route-control policy at the correct OSPF hierarchy.

Incorrect Answers

B:

OSPF protocol authentication checks configured credentials for applicable neighbor exchanges. The appropriate correction for the reported case is: Apply a targeted interarea summarization or route-control policy at the correct OSPF hierarchy.

C:

A not-so-stubby area allows local external routes using type-7 LSAs and an ABR can translate them toward other areas. Fixing that different mechanism would not address the current root cause: OSPF interarea summary-LSA generation can be governed with supported routing policies on ABRs.

D:

Junos requires a suitable route export policy to originate eligible non-OSPFv3 routes. Its verification is distinct from the reported condition: An ABR leaks a sensitive or unwanted interarea prefix despite intended area filtering. The internal forwarding path must remain stable when one uplink fails.

Question 314

At a multimedia training network running Junos multicast routers, a Junos specialist investigates this scenario: A campus multicast application leaks into an intersite link where the traffic is not permitted. The corrected tree must respect source and group authorization. Which operational result would most clearly confirm the fix?

  1. A receiver can join G and obtain traffic from an approved discovered sender.
  2. An allowed test group crosses the boundary while a restricted group does not.
  3. Approved stream sources deliver while unauthorized source traffic does not build usable state.
  4. Subscribers join the selected multicast group and receive matching test packets.

Explanation

Correct Answer

B:

For a multimedia training network running Junos multicast routers, the decisive evidence is: An allowed test group crosses the boundary while a restricted group does not. This validates the action: Apply explicit multicast scope or PIM routing policy at the relevant domain boundary. Because: Multicast group and routing policies can limit which group ranges and sources cross specified boundaries. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

A:

Any-source multicast allows receivers to request a group independent of a specific source, typically using a shared-tree mechanism. The appropriate correction for the reported case is: Apply explicit multicast scope or PIM routing policy at the relevant domain boundary.

C:

PIM and multicast routing policy can be applied to limit permitted source and group reachability. Fixing that different mechanism would not address the current root cause: multicast group and routing policies can limit which group ranges and sources cross specified boundaries.

D:

IPv4 multicast traffic uses group addresses from 224.0.0.0 through 239.255.255.255 rather than ordinary unicast host destinations. Its verification is distinct from the reported condition: A campus multicast application leaks into an intersite link where the traffic is not permitted. The corrected tree must respect source and group authorization.

Question 315

At a congested enterprise WAN carrying video, voice and backups, a Junos specialist investigates this scenario: Traffic is internally classified correctly but leaves the site with DSCP markings that an upstream provider does not recognize. The network must keep critical application latency within policy. Which precaution should be checked before committing the change?

  1. Validate VLAN tagging and trust boundary before treating all access-port PCP markings as genuine.
  2. Verify the actual output interface and aggregate hierarchy rather than binding a map to the wrong unit.
  3. Check carrier QoS agreements and do not remark traffic to privileged codepoints without approval.
  4. Do not trust unverified DSCP values from arbitrary user-controlled ports.

Explanation

Correct Answer

C:

For a congested enterprise WAN carrying video, voice and backups, the relevant safeguard is: Check carrier QoS agreements and do not remark traffic to privileged codepoints without approval. It matters while implementing: Apply a supported DSCP rewrite rule on the designated egress interface. The fault involves: Junos rewrite rules map internal forwarding class and loss-priority information to outgoing packet codepoints. The required acceptance result remains: Packet captures on egress show the agreed DSCP values for representative classes.

Incorrect Answers

A:

IEEE 802.1p priority values in tagged Ethernet frames can drive behavior aggregate Layer 2 CoS classification. The appropriate correction for the reported case is: Check carrier QoS agreements and do not remark traffic to privileged codepoints without approval.

B:

A scheduler map must be associated with the appropriate interface for selected class-to-scheduler behavior. Fixing that different mechanism would not address the current root cause: junos rewrite rules map internal forwarding class and loss-priority information to outgoing packet codepoints.

D:

A behavior aggregate classifier maps incoming codepoint values to local forwarding class and loss priority. Its verification is distinct from the reported condition: Traffic is internally classified correctly but leaves the site with DSCP markings that an upstream provider does not recognize. The network must keep critical application latency within policy.

Question 316

At a campus distributing IP video to several buildings, a Junos specialist investigates this scenario: A multicast receiver fails even though unicast pings and IGMP joins look healthy. The group traffic must reach interested receivers without flooding other locations. What requirement most specifically calls for this approach?

  1. Use PIM bootstrap-based RP discovery in compatible sparse-mode domains.
  2. Use IPv4 multicast addressing when a sender must distribute the same traffic to many receivers.
  3. Use multicast scoping to contain group distribution within approved regions.
  4. Use multicast route tables to troubleshoot one-way group forwarding failures.

Explanation

Correct Answer

D:

For a campus distributing IP video to several buildings, this mechanism fits the requirement: Use multicast route tables to troubleshoot one-way group forwarding failures. The design is appropriate because: Multicast forwarding depends on per-group and per-source route state in addition to host membership. In this scenario, the observed issue is: A multicast receiver fails even though unicast pings and IGMP joins look healthy. The corresponding implementation is: Inspect multicast route, upstream interface and output interface list for the failed group.

Incorrect Answers

A:

PIM bootstrap router mechanisms can advertise eligible RP information to routers in the multicast domain. The appropriate correction for the reported case is: Inspect multicast route, upstream interface and output interface list for the failed group.

B:

IPv4 multicast traffic uses group addresses from 224.0.0.0 through 239.255.255.255 rather than ordinary unicast host destinations. Fixing that different mechanism would not address the current root cause: multicast forwarding depends on per-group and per-source route state in addition to host membership.

C:

Multicast group and routing policies can limit which group ranges and sources cross specified boundaries. Its verification is distinct from the reported condition: A multicast receiver fails even though unicast pings and IGMP joins look healthy. The group traffic must reach interested receivers without flooding other locations.

Question 317

At a large enterprise updating redundant switch links, a Junos specialist investigates this scenario: A switch interconnect passes one VLAN but drops frames for a second authorized VLAN. The change must retain both link resilience and correct VLAN isolation. What verification result should the engineer expect?

  1. Both VLANs pass tagged frames and switch VLAN membership reports the intended trunk.
  2. Two isolated test devices cannot communicate directly but each can reach the authorized gateway.
  3. Isolated and community hosts reach the shared gateway while tenant-to-tenant restrictions remain.
  4. show ethernet-switching interfaces displays the assigned VLAN and test hosts reach only its subnet.

Explanation

Correct Answer

A:

For a large enterprise updating redundant switch links, the decisive evidence is: Both VLANs pass tagged frames and switch VLAN membership reports the intended trunk. This validates the action: Configure the required VLAN members on both ends of the tagged trunk. Because: An Ethernet trunk carries selected tagged VLANs and membership must include every allowed VLAN. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

B:

Private VLAN isolated ports restrict communication with peer isolated ports while allowing designated promiscuous connectivity. The appropriate correction for the reported case is: Configure the required VLAN members on both ends of the tagged trunk.

C:

Private VLAN promiscuous ports can communicate with applicable secondary VLAN ports, providing a shared exit. Fixing that different mechanism would not address the current root cause: An Ethernet trunk carries selected tagged VLANs and membership must include every allowed VLAN.

D:

An untagged Ethernet access port places endpoint traffic into its configured access VLAN. Its verification is distinct from the reported condition: A switch interconnect passes one VLAN but drops frames for a second authorized VLAN. The change must retain both link resilience and correct VLAN isolation.

Question 318

At a data-center access fabric using tagged trunks, a Junos specialist investigates this scenario: A unicast frame is flooded across a VLAN because the switch lacks a destination MAC entry. The proposed behavior must be validated on actual switching ports. Which precaution should be checked before committing the change?

  1. Validate interoperability with non-VSTP neighbors before splitting root placement.
  2. Check MAC aging and port movement before pinning static entries.
  3. Check LACP mode, member speed and VLAN consistency before bringing up the bundle.
  4. Check interface roles and platform behavior before enabling loop protection broadly.

Explanation

Correct Answer

B:

For a data-center access fabric using tagged trunks, the relevant safeguard is: Check MAC aging and port movement before pinning static entries. It matters while implementing: Verify MAC learning and the relevant source port/VLAN association. The fault involves: Layer 2 switches learn source MAC addresses on ingress ports and forward known unicast using their MAC tables. The required acceptance result remains: show ethernet-switching table contains the expected MAC-to-port entry and forwarding becomes selective.

Incorrect Answers

A:

VLAN Spanning Tree Protocol allows separate tree instances for selected VLANs and can choose different roots. The appropriate correction for the reported case is: Check MAC aging and port movement before pinning static entries.

C:

A link aggregation group presents multiple member links as one logical Ethernet interface when both peers agree. Fixing that different mechanism would not address the current root cause: layer 2 switches learn source MAC addresses on ingress ports and forward known unicast using their MAC tables.

D:

Loop protection helps guard against unsafe port state changes when expected spanning-tree BPDUs disappear. Its verification is distinct from the reported condition: A unicast frame is flooded across a VLAN because the switch lacks a destination MAC entry. The proposed behavior must be validated on actual switching ports.

Question 319

At a provider Ethernet network carrying customer Layer 2 services, a Junos specialist investigates this scenario: A service provider must carry identical customer VLAN IDs from different tenants without mixing their traffic. The service must preserve tags without bridging unrelated tenants. When would the described mechanism be appropriate?

  1. Use BPDU protection on host access ports to prevent rogue Layer 2 bridges.
  2. Use storm control to constrain unexpected Layer 2 flooding from an edge device.
  3. Use Q-in-Q to transport customer VLAN tags through a provider Ethernet domain.
  4. Account for Q-in-Q encapsulation overhead when planning L2 transport MTU.

Explanation

Correct Answer

C:

For a provider Ethernet network carrying customer Layer 2 services, this mechanism fits the requirement: Use Q-in-Q to transport customer VLAN tags through a provider Ethernet domain. The design is appropriate because: IEEE 802.1ad Q-in-Q encapsulates customer-tagged frames with an outer service VLAN tag. In this scenario, the observed issue is: A service provider must carry identical customer VLAN IDs from different tenants without mixing their traffic. The corresponding implementation is: Configure supported provider bridging with a distinct service tag for each tenant context.

Incorrect Answers

A:

BPDU protection can prevent an edge interface from accepting unauthorized bridge control messages. The appropriate correction for the reported case is: Configure supported provider bridging with a distinct service tag for each tenant context.

B:

Layer 2 storm control limits specified excessive broadcast or multicast traffic on a port. Fixing that different mechanism would not address the current root cause: IEEE 802.1ad Q-in-Q encapsulates customer-tagged frames with an outer service VLAN tag.

D:

Adding an outer VLAN tag increases Ethernet frame size and may exceed an interface's supported MTU. Its verification is distinct from the reported condition: A service provider must carry identical customer VLAN IDs from different tenants without mixing their traffic. The service must preserve tags without bridging unrelated tenants. When would the described mechanism be appropriate.

Question 320

At a regional provider operating Junos-based branch routers, a Junos specialist investigates this scenario: OSPF adjacency troubleshooting reveals two different devices using the same router identifier. The team must validate neighbor state rather than assume basic IP reachability proves routing. Which limitation should guide the change control?

  1. Avoid shortening dead timers without checking CPU load and adjacent platform support.
  2. Avoid originating a default to a dead WAN without route tracking or failover planning.
  3. Avoid enabling ECMP across paths with incompatible MTU or traffic-security policies.
  4. Coordinate identity changes because LSAs and neighbor databases can be rebuilt.

Explanation

Correct Answer

D:

For a regional provider operating Junos-based branch routers, the relevant safeguard is: Coordinate identity changes because LSAs and neighbor databases can be rebuilt. It matters while implementing: Configure distinct stable router IDs and restart or refresh affected protocol processes as supported. The fault involves: The OSPF router ID uniquely identifies an originator of link-state information within the routing domain. The required acceptance result remains: Each OSPF peer reports a distinct expected router ID and adjacency state becomes stable.

Incorrect Answers

A:

Neighbor compatibility depends on matching Hello and dead intervals for the participating link. The appropriate correction for the reported case is: Coordinate identity changes because LSAs and neighbor databases can be rebuilt.

B:

A scoped OSPF default-route export can advertise 0.0.0.0/0 when the default is valid. Fixing that different mechanism would not address the current root cause: the OSPF router ID uniquely identifies an originator of link-state information within the routing domain.

C:

OSPF can compute equal-cost paths; forwarding utilization depends on installed next hops and platform ECMP behavior. Its verification is distinct from the reported condition: OSPF adjacency troubleshooting reveals two different devices using the same router identifier. The team must validate neighbor state rather than assume basic IP reachability proves routing.

Enterprise Routing and Switching, Professional (JNCIP-ENT) (JN0-650) Practice Tests