mcAfee Secure Website
exam =5
exam =6

Exam Code: JN0-650

Exam Name: Enterprise Routing and Switching, Professional (JNCIP-ENT)

Certification Provider: Juniper

Corresponding Certification: JNCIP-ENT

Juniper JN0-650 Questions & Answers

Reliable & Actual Study Materials for JN0-650 Exam Success

107 Questions & Answers with Testing Engine

"JN0-650: Enterprise Routing and Switching, Professional (JNCIP-ENT)" Testing Engine covers all the knowledge points of the real Juniper JN0-650 exam.

The latest actual JN0-650 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at JN0-650 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Juniper Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Juniper JN0-650 Practice Test 30

Question 290

At a dual-homed business network peering with two upstream providers, a Junos specialist investigates this scenario: An enterprise iBGP network cannot scale because every routing speaker requires a direct adjacency with every other speaker. The routing policy must retain intended primary and backup paths. For which use case is this feature the best match?

  1. Use eBGP multihop for intentionally non-direct external BGP peerings.
  2. Use BGP route reflectors to scale internal route distribution beyond a full mesh.
  3. Use consistent cluster-ID design for redundant route reflectors in one cluster.
  4. Use MED to suggest a preferred inbound interconnection to a cooperating neighbor AS.

Explanation

Correct Answer

B:

For a dual-homed business network peering with two upstream providers, this mechanism fits the requirement: Use BGP route reflectors to scale internal route distribution beyond a full mesh. The design is appropriate because: Ordinary iBGP split-horizon rules avoid re-advertising routes between iBGP peers; route reflectors provide controlled reflection. In this scenario, the observed issue is: An enterprise iBGP network cannot scale because every routing speaker requires a direct adjacency with every other speaker. The corresponding implementation is: Deploy supported route-reflector clusters and designate approved clients with appropriate topology.

Incorrect Answers

A:

A nonadjacent eBGP neighbor may require a compatible multihop TTL and suitable route to the remote endpoint. The appropriate correction for the reported case is: Deploy supported route-reflector clusters and designate approved clients with appropriate topology.

C:

Route reflector cluster identifiers participate in loop detection on reflected BGP paths. Fixing that different mechanism would not address the current root cause: ordinary iBGP split-horizon rules avoid re-advertising routes between iBGP peers; route reflectors provide controlled reflection.

D:

BGP MED can signal a preferred ingress point to a neighboring AS subject to the neighbor's selection policy. Its verification is distinct from the reported condition: An enterprise iBGP network cannot scale because every routing speaker requires a direct adjacency with every other speaker. The routing policy must retain intended primary and backup paths.

Question 291

At a service provider offering isolated VXLAN services, a Junos specialist investigates this scenario: Multiple PEs attach to one Ethernet segment but cannot discover consistent peers for multihoming decisions. The engineer must verify both BGP EVPN signaling and underlay reachability. Which technical mechanism most directly explains the symptom?

  1. EVPN route type 2 advertises MAC reachability and can include associated IP information for hosts.
  2. EVPN Ethernet Auto-Discovery route type 1 participates in multihoming reachability and mass-withdraw behavior.
  3. EVPN Ethernet Segment route type 4 supports discovery of PEs connected to the same Ethernet segment.
  4. VXLAN tunnels require IP reachability between VTEP addresses and adequate underlay transport capacity.

Explanation

Correct Answer

C:

For a service provider offering isolated VXLAN services, the governing mechanism is: EVPN Ethernet Segment route type 4 supports discovery of PEs connected to the same Ethernet segment. It explains the reported symptom: Multiple PEs attach to one Ethernet segment but cannot discover consistent peers for multihoming decisions. The intended response is: Verify compatible Ethernet segment identifiers and advertisement of type-4 segment routes. Verification: Each PE sees its expected remote multihoming peers and a consistent segment identity.

Incorrect Answers

A:

EVPN route type 2 advertises MAC reachability and can include associated IP information for hosts. This alternative mechanism does not match the current fault.

B:

EVPN Ethernet Auto-Discovery route type 1 participates in multihoming reachability and mass-withdraw behavior. Fixing that different mechanism would not address the current root cause: EVPN Ethernet Segment route type 4 supports discovery of PEs connected to the same Ethernet segment.

D:

VXLAN tunnels require IP reachability between VTEP addresses and adequate underlay transport capacity. Its verification is distinct from the reported condition: Multiple PEs attach to one Ethernet segment but cannot discover consistent peers for multihoming decisions. The engineer must verify both BGP EVPN signaling and underlay reachability.

Question 292

At a multimedia training network running Junos multicast routers, a Junos specialist investigates this scenario: A large multicast domain requires dynamic discovery of candidate RPs instead of maintaining every mapping manually. The corrected tree must respect source and group authorization. What is the most appropriate correction to implement?

  1. Enable compatible PIM on the appropriate routed interfaces and allow required multicast control traffic.
  2. Allocate an appropriate multicast group address in a scope permitted for the enterprise distribution.
  3. Deploy supported anycast RP members with the necessary source-state exchange mechanism.
  4. Configure a compatible bootstrap router and candidate RP strategy within the intended administrative scope.

Explanation

Correct Answer

D:

For a multimedia training network running Junos multicast routers, the direct corrective action is: Configure a compatible bootstrap router and candidate RP strategy within the intended administrative scope. This addresses the mechanism: PIM bootstrap router mechanisms can advertise eligible RP information to routers in the multicast domain. Confirm by checking: Routers learn the expected RP mapping and group traffic builds a valid shared tree. During rollout, protect election priorities and domain boundaries from unauthorized RP injection.

Incorrect Answers

A:

PIM routers discover routing neighbors on participating interfaces through PIM Hello exchanges. The appropriate correction for the reported case is: Configure a compatible bootstrap router and candidate RP strategy within the intended administrative scope.

B:

IPv4 multicast traffic uses group addresses from 224.0.0.0 through 239.255.255.255 rather than ordinary unicast host destinations. Fixing that different mechanism would not address the current root cause: PIM bootstrap router mechanisms can advertise eligible RP information to routers in the multicast domain.

C:

Anycast RP permits multiple rendezvous points to share one RP address with routing choosing a reachable instance. Its verification is distinct from the reported condition: A large multicast domain requires dynamic discovery of candidate RPs instead of maintaining every mapping manually. The corrected tree must respect source and group authorization.

Question 293

At a corporate campus enforcing wired network access, a Junos specialist investigates this scenario: A legacy network printer cannot run an 802.1X supplicant and never receives permitted LAN access. Unknown endpoints must not gain access to protected internal VLANs. Which operational change most directly resolves the observed failure?

  1. Enable MAC RADIUS as an approved method for the printer port and register the permitted device identity.
  2. Set an explicit supported fallback policy and test a simulated RADIUS timeout.
  3. Configure supported dot1x authenticator and RADIUS settings and verify valid supplicant credentials.
  4. Configure supported guest VLAN behavior and its restricted connectivity policy on the access port.

Explanation

Correct Answer

A:

For a corporate campus enforcing wired network access, the direct corrective action is: Enable MAC RADIUS as an approved method for the printer port and register the permitted device identity. This addresses the mechanism: MAC RADIUS can authenticate eligible non-802.1X endpoints using MAC-based identity against approved RADIUS policy. Confirm by checking: The intended printer gains restricted access while an unrecognized MAC does not inherit privileged resources. During rollout, treat MAC addresses as spoofable and pair this method with restrictive network segmentation.

Incorrect Answers

B:

Server fail fallback controls permit, deny, cached access or restricted VLAN assignment when authentication infrastructure is unavailable. The appropriate correction for the reported case is: Enable MAC RADIUS as an approved method for the printer port and register the permitted device identity.

C:

802.1X uses a supplicant, switch authenticator and authentication server to validate identity before controlled port access. Fixing that different mechanism would not address the current root cause: MAC RADIUS can authenticate eligible non-802.1X endpoints using MAC-based identity against approved RADIUS policy.

D:

A guest VLAN can supply restricted access for supported nonresponsive clients when the authentication mode allows it. Its verification is distinct from the reported condition: A legacy network printer cannot run an 802.1X supplicant and never receives permitted LAN access. Unknown endpoints must not gain access to protected internal VLANs.

Question 294

At a campus switch team configuring Junos egress queues, a Junos specialist investigates this scenario: A provider supplies correctly DSCP-marked packets but the Junos edge handles all traffic as best effort. The improvement must not starve business traffic. Which limitation should guide the change control?

  1. Avoid aggressive early drops that harm short or sensitive application flows.
  2. Do not trust unverified DSCP values from arbitrary user-controlled ports.
  3. Review fragment behavior and protocol matches before relying on broad address-only conditions.
  4. Do not infer an absence of congestion from a low five-minute average utilization value alone.

Explanation

Correct Answer

B:

For a campus switch team configuring Junos egress queues, the relevant safeguard is: Do not trust unverified DSCP values from arbitrary user-controlled ports. It matters while implementing: Attach the appropriate DSCP BA classifier to the trusted ingress interface. The fault involves: A behavior aggregate classifier maps incoming codepoint values to local forwarding class and loss priority. The required acceptance result remains: Packets with the approved DSCP values enter the expected forwarding queues.

Incorrect Answers

A:

A Junos drop profile can define queue occupancy thresholds and drop probabilities before absolute congestion. The appropriate correction for the reported case is: Do not trust unverified DSCP values from arbitrary user-controlled ports.

C:

A multifield firewall filter can classify selected packets using header fields and set an appropriate forwarding class. Fixing that different mechanism would not address the current root cause: a behavior aggregate classifier maps incoming codepoint values to local forwarding class and loss priority.

D:

Per-queue counters reveal forwarding class use, transmission and discard behavior during congestion. Its verification is distinct from the reported condition: A provider supplies correctly DSCP-marked packets but the Junos edge handles all traffic as best effort. The improvement must not starve business traffic.

Question 295

At a data-center access fabric using tagged trunks, a Junos specialist investigates this scenario: A user plugs a small switch into a campus edge port and introduces unexpected spanning-tree control traffic. The proposed behavior must be validated on actual switching ports. What verification result should the engineer expect?

  1. Both participating switches learn the correct registered VLAN and forward its traffic.
  2. show ethernet-switching interfaces displays the assigned VLAN and test hosts reach only its subnet.
  3. A controlled received-BPDU test produces the expected protective state and alert.
  4. Both VLANs pass tagged frames and switch VLAN membership reports the intended trunk.

Explanation

Correct Answer

C:

For a data-center access fabric using tagged trunks, the decisive evidence is: A controlled received-BPDU test produces the expected protective state and alert. This validates the action: Enable the supported BPDU protection behavior on designated host-facing ports. Because: BPDU protection can prevent an edge interface from accepting unauthorized bridge control messages. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

A:

Multiple VLAN Registration Protocol exchanges VLAN registration information between participating bridged devices. The appropriate correction for the reported case is: Enable the supported BPDU protection behavior on designated host-facing ports.

B:

An untagged Ethernet access port places endpoint traffic into its configured access VLAN. Fixing that different mechanism would not address the current root cause: BPDU protection can prevent an edge interface from accepting unauthorized bridge control messages.

D:

An Ethernet trunk carries selected tagged VLANs and membership must include every allowed VLAN. Its verification is distinct from the reported condition: A user plugs a small switch into a campus edge port and introduces unexpected spanning-tree control traffic. The proposed behavior must be validated on actual switching ports.

Question 296

At an enterprise telemetry network with multicast subscribers, a Junos specialist investigates this scenario: Traffic continues on a downstream path after the final interested receiver leaves the group. The team should test joins and forwarding separately. What risk must the implementation avoid?

  1. Do not interpret (*,G) shared-tree membership as proof that a particular source is forwarding.
  2. Avoid enabling PIM on unrelated edge ports or firewall zones by default.
  3. Check the RP mapping before assuming a source-specific join is mandatory for ASM.
  4. Avoid treating a local leave as proof that the entire multicast source tree should stop.

Explanation

Correct Answer

D:

For an enterprise telemetry network with multicast subscribers, the relevant safeguard is: Avoid treating a local leave as proof that the entire multicast source tree should stop. It matters while implementing: Inspect and correct downstream receiver removal and upstream PIM prune processing. The fault involves: PIM Join and Prune signaling maintains or removes forwarding-tree state as downstream interest changes. The required acceptance result remains: The unneeded branch ages out or prunes while other receiver branches remain active.

Incorrect Answers

A:

(S,G) multicast state identifies one particular source S and destination group G. The appropriate correction for the reported case is: Avoid treating a local leave as proof that the entire multicast source tree should stop.

B:

PIM routers discover routing neighbors on participating interfaces through PIM Hello exchanges. Fixing that different mechanism would not address the current root cause: PIM Join and Prune signaling maintains or removes forwarding-tree state as downstream interest changes.

C:

Shared-tree (*,G) state expresses interest in traffic to group G from potentially multiple sources. Its verification is distinct from the reported condition: Traffic continues on a downstream path after the final interested receiver leaves the group. The team should test joins and forwarding separately.

Question 297

At a multihomed data center using redundant Ethernet segments, a Junos specialist investigates this scenario: A dual-homed server should use both eligible attachments but its EVPN configuration uses a standby-only design. The design must avoid forwarding loops during failover. Which response best restores the intended behavior?

  1. Configure supported all-active Ethernet segment multihoming and consistent ESI state.
  2. Repair underlay routes, relevant UDP encapsulation permission and VTEP reachability.
  3. Validate the Ethernet A-D advertisements and intended multihoming failover configuration.
  4. Select a supported single-active multihoming design and check ESI and DF behavior.

Explanation

Correct Answer

A:

For a multihomed data center using redundant Ethernet segments, the direct corrective action is: Configure supported all-active Ethernet segment multihoming and consistent ESI state. This addresses the mechanism: EVPN all-active multihoming permits multiple PEs to forward eligible known-unicast traffic with appropriate control-plane loop prevention. Confirm by checking: Eligible unicast traffic uses both active attachments and survives loss of one PE. During rollout, validate split-horizon, DF and CE LAG behavior so redundancy does not create loops.

Incorrect Answers

B:

VXLAN tunnels require IP reachability between VTEP addresses and adequate underlay transport capacity. The appropriate correction for the reported case is: Configure supported all-active Ethernet segment multihoming and consistent ESI state.

C:

EVPN Ethernet Auto-Discovery route type 1 participates in multihoming reachability and mass-withdraw behavior. Fixing that different mechanism would not address the current root cause: EVPN all-active multihoming permits multiple PEs to forward eligible known-unicast traffic with appropriate control-plane loop prevention.

D:

EVPN single-active multihoming restricts the forwarding role on an Ethernet segment to a selected active PE. Its verification is distinct from the reported condition: A dual-homed server should use both eligible attachments but its EVPN configuration uses a standby-only design. The design must avoid forwarding loops during failover.

Question 298

At a managed network team troubleshooting an internet edge, a Junos specialist investigates this scenario: A session negotiates only a non-IPv4 family and the expected IPv4 unicast routes do not arrive. The diagnosis must distinguish a healthy BGP session from eligible received routes. What important rollout safeguard is most relevant here?

  1. Confirm the advertising router actually has valid egress before making it a transit hop.
  2. Check family mismatches before changing general session hold timers.
  3. Do not confuse BGP local preference with Junos protocol-level route preference.
  4. Avoid assuming an Established IPv4 BGP session proves IPv6 NLRI capability.

Explanation

Correct Answer

B:

For a managed network team troubleshooting an internet edge, the relevant safeguard is: Check family mismatches before changing general session hold timers. It matters while implementing: Configure the intended inet-unicast family on the authorized BGP peering. The fault involves: BGP NLRI family selection must include inet-unicast for eligible IPv4 unicast prefixes. The required acceptance result remains: The peer exchanges a test IPv4 prefix and the route enters inet.0 when eligible.

Incorrect Answers

A:

IBGP propagation may retain the original eBGP next-hop attribute unless policy or configuration changes it. The appropriate correction for the reported case is: Check family mismatches before changing general session hold timers.

C:

BGP LOCAL_PREF determines preferred exit within an AS; higher values generally win over lower ones. Fixing that different mechanism would not address the current root cause: BGP NLRI family selection must include inet-unicast for eligible IPv4 unicast prefixes.

D:

BGP address-family negotiation determines whether IPv6 unicast NLRI can be exchanged. Its verification is distinct from the reported condition: A session negotiates only a non-IPv4 family and the expected IPv4 unicast routes do not arrive. The diagnosis must distinguish a healthy BGP session from eligible received routes.

Question 299

At a live-event venue using routed multicast streaming, a Junos specialist investigates this scenario: A new ASM sender transmits but remote receivers never learn about the source through their RP. The change must preserve source identity and avoid multicast loops. Which limitation should guide the change control?

  1. Check membership and forwarding behavior after changes to avoid blocking critical legitimate receivers.
  2. Do not interpret (*,G) shared-tree membership as proof that a particular source is forwarding.
  3. Monitor register handling and filters so unsolicited sources cannot overwhelm the RP.
  4. Validate host and switch feature support before relying on source filtering.

Explanation

Correct Answer

C:

For a live-event venue using routed multicast streaming, the relevant safeguard is: Monitor register handling and filters so unsolicited sources cannot overwhelm the RP. It matters while implementing: Verify source-facing PIM DR behavior and reachability to the correct rendezvous point. The fault involves: In PIM sparse-mode ASM, a first-hop designated router can register new source traffic with the RP. The required acceptance result remains: The RP learns the source and joined downstream receivers begin receiving the stream.

Incorrect Answers

A:

PIM and multicast routing policy can be applied to limit permitted source and group reachability. The appropriate correction for the reported case is: Monitor register handling and filters so unsolicited sources cannot overwhelm the RP.

B:

(S,G) multicast state identifies one particular source S and destination group G. Fixing that different mechanism would not address the current root cause: in PIM sparse-mode ASM, a first-hop designated router can register new source traffic with the RP.

D:

IGMPv3 membership records can identify source filters that enable explicit SSM interest. Its verification is distinct from the reported condition: A new ASM sender transmits but remote receivers never learn about the source through their RP. The change must preserve source identity and avoid multicast loops.

Question 300

At a Junos EVPN-VXLAN leaf-spine fabric, a Junos specialist investigates this scenario: Two leaf switches dual-home one server but the remote fabric treats their attachments as unrelated segments. The tenant traffic must remain isolated across the overlay. When would the described mechanism be appropriate?

  1. Use EVPN type-4 routes for Ethernet segment discovery among multihomed peers.
  2. Use EVPN type-5 routes for routed IP-prefix reachability between EVPN sites.
  3. Use EVPN type-1 routes for Ethernet segment reachability and efficient multihoming withdrawal.
  4. Use a shared ESI for EVPN multihomed links belonging to one Ethernet segment.

Explanation

Correct Answer

D:

For a Junos EVPN-VXLAN leaf-spine fabric, this mechanism fits the requirement: Use a shared ESI for EVPN multihomed links belonging to one Ethernet segment. The design is appropriate because: A common Ethernet Segment Identifier identifies the shared multihomed Ethernet segment for EVPN coordination. In this scenario, the observed issue is: Two leaf switches dual-home one server but the remote fabric treats their attachments as unrelated segments. The corresponding implementation is: Configure a consistent nonconflicting ESI on the intended dual-homed attachment.

Incorrect Answers

A:

EVPN Ethernet Segment route type 4 supports discovery of PEs connected to the same Ethernet segment. The appropriate correction for the reported case is: Configure a consistent nonconflicting ESI on the intended dual-homed attachment.

B:

EVPN route type 5 conveys IP prefix reachability and can support routed overlay designs. Fixing that different mechanism would not address the current root cause: a common Ethernet Segment Identifier identifies the shared multihomed Ethernet segment for EVPN coordination.

C:

EVPN Ethernet Auto-Discovery route type 1 participates in multihoming reachability and mass-withdraw behavior. Its verification is distinct from the reported condition: Two leaf switches dual-home one server but the remote fabric treats their attachments as unrelated segments. The tenant traffic must remain isolated across the overlay. When would the described mechanism be appropriate.

Enterprise Routing and Switching, Professional (JNCIP-ENT) (JN0-650) Practice Tests