mcAfee Secure Website
exam =5
exam =6

Exam Code: JN0-650

Exam Name: Enterprise Routing and Switching, Professional (JNCIP-ENT)

Certification Provider: Juniper

Corresponding Certification: JNCIP-ENT

Juniper JN0-650 Questions & Answers

Reliable & Actual Study Materials for JN0-650 Exam Success

107 Questions & Answers with Testing Engine

"JN0-650: Enterprise Routing and Switching, Professional (JNCIP-ENT)" Testing Engine covers all the knowledge points of the real Juniper JN0-650 exam.

The latest actual JN0-650 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at JN0-650 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Juniper Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Juniper JN0-650 Practice Test 31

Question 300

At a Junos EVPN-VXLAN leaf-spine fabric, a Junos specialist investigates this scenario: Two leaf switches dual-home one server but the remote fabric treats their attachments as unrelated segments. The tenant traffic must remain isolated across the overlay. When would the described mechanism be appropriate?

  1. Use EVPN type-4 routes for Ethernet segment discovery among multihomed peers.
  2. Use EVPN type-5 routes for routed IP-prefix reachability between EVPN sites.
  3. Use EVPN type-1 routes for Ethernet segment reachability and efficient multihoming withdrawal.
  4. Use a shared ESI for EVPN multihomed links belonging to one Ethernet segment.

Explanation

Correct Answer

D:

For a Junos EVPN-VXLAN leaf-spine fabric, this mechanism fits the requirement: Use a shared ESI for EVPN multihomed links belonging to one Ethernet segment. The design is appropriate because: A common Ethernet Segment Identifier identifies the shared multihomed Ethernet segment for EVPN coordination. In this scenario, the observed issue is: Two leaf switches dual-home one server but the remote fabric treats their attachments as unrelated segments. The corresponding implementation is: Configure a consistent nonconflicting ESI on the intended dual-homed attachment.

Incorrect Answers

A:

EVPN Ethernet Segment route type 4 supports discovery of PEs connected to the same Ethernet segment. The appropriate correction for the reported case is: Configure a consistent nonconflicting ESI on the intended dual-homed attachment.

B:

EVPN route type 5 conveys IP prefix reachability and can support routed overlay designs. Fixing that different mechanism would not address the current root cause: a common Ethernet Segment Identifier identifies the shared multihomed Ethernet segment for EVPN coordination.

C:

EVPN Ethernet Auto-Discovery route type 1 participates in multihoming reachability and mass-withdraw behavior. Its verification is distinct from the reported condition: Two leaf switches dual-home one server but the remote fabric treats their attachments as unrelated segments. The tenant traffic must remain isolated across the overlay. When would the described mechanism be appropriate.

Question 301

At a campus distributing IP video to several buildings, a Junos specialist investigates this scenario: A multicast router drops a received stream even though its physical receiving interface is up. The group traffic must reach interested receivers without flooding other locations. Which observation proves this requirement has been satisfied?

  1. The multicast forwarding state uses the intended RPF interface and packet discard counters stop increasing.
  2. The multicast entry uses the source-rooted RPF path and traffic follows the shorter topology.
  3. Only joined receiver ports receive the test multicast frames during stable operation.
  4. show pim rps reports the planned RP and receivers join the corresponding tree.

Explanation

Correct Answer

A:

For a campus distributing IP video to several buildings, the decisive evidence is: The multicast forwarding state uses the intended RPF interface and packet discard counters stop increasing. This validates the action: Correct the unicast route or multicast RPF path so the packet arrives on the accepted upstream interface. Because: Multicast reverse-path forwarding verifies that a packet arrives via a valid route back toward its source or RP. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

B:

PIM-SM can transition selected traffic from an RP-rooted shared tree to a source-rooted shortest-path tree. The appropriate correction for the reported case is: Correct the unicast route or multicast RPF path so the packet arrives on the accepted upstream interface.

C:

IGMP snooping lets a Layer 2 switch learn interested receiver ports and limit multicast flooding within a VLAN. Fixing that different mechanism would not address the current root cause: multicast reverse-path forwarding verifies that a packet arrives via a valid route back toward its source or RP.

D:

PIM-SM shared-tree construction depends on consistent mappings of multicast groups to suitable RPs. Its verification is distinct from the reported condition: A multicast router drops a received stream even though its physical receiving interface is up. The group traffic must reach interested receivers without flooding other locations.

Question 302

At a branch introducing an IP telephony access layer, a Junos specialist investigates this scenario: A high-capacity phone reports insufficient power even though the switch's overall power budget is adequate. The solution should not give workstation traffic untrusted voice privileges. Which operational result would most clearly confirm the fix?

  1. The phone adopts the approved voice VLAN tag and registers using the expected voice network.
  2. Switch and phone agree on the needed power allocation and optional hardware stays enabled.
  3. show lldp neighbors identifies the intended adjacent device and receiving port.
  4. Switch power telemetry shows the correct allocated class and the phone operates stably.

Explanation

Correct Answer

B:

For a branch introducing an IP telephony access layer, the decisive evidence is: Switch and phone agree on the needed power allocation and optional hardware stays enabled. This validates the action: Check LLDP-MED power negotiation and available power on the phone's switch interface. Because: Supported LLDP-MED or LLDP power TLVs can negotiate endpoint power requirements beyond static class assumptions. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

A:

LLDP-MED network policy information can advertise voice VLAN and QoS settings to compatible phones. The appropriate correction for the reported case is: Check LLDP-MED power negotiation and available power on the phone's switch interface.

C:

Link Layer Discovery Protocol advertises local chassis and port information to directly attached compatible devices. Fixing that different mechanism would not address the current root cause: supported LLDP-MED or LLDP power TLVs can negotiate endpoint power requirements beyond static class assumptions.

D:

PoE power classification informs the power source of the powered device's required allocation. Its verification is distinct from the reported condition: A high-capacity phone reports insufficient power even though the switch's overall power budget is adequate. The solution should not give workstation traffic untrusted voice privileges.

Question 303

At a university separating multiple OSPF areas, a Junos specialist investigates this scenario: An IPv6 static prefix is installed locally but not redistributed to the OSPFv3 domain. The routing change must preserve control-plane consistency across areas. What protocol behavior accounts for this failure?

  1. A passive OSPF interface can advertise attached reachability while suppressing neighbor-discovery Hellos.
  2. Junos OSPF normally requires explicit export policy to redistribute eligible non-OSPF routes as external reachability.
  3. Junos requires a suitable route export policy to originate eligible non-OSPFv3 routes.
  4. OSPF interarea summary-LSA generation can be governed with supported routing policies on ABRs.

Explanation

Correct Answer

C:

For a university separating multiple OSPF areas, the governing mechanism is: Junos requires a suitable route export policy to originate eligible non-OSPFv3 routes. It explains the reported symptom: An IPv6 static prefix is installed locally but not redistributed to the OSPFv3 domain. The intended response is: Match the intended IPv6 static route in a scoped export policy under the OSPFv3 process. Verification: Other OSPFv3 routers learn the specified external IPv6 prefix without unrelated statics.

Incorrect Answers

A:

A passive OSPF interface can advertise attached reachability while suppressing neighbor-discovery Hellos. This alternative mechanism does not match the current fault.

B:

Junos OSPF normally requires explicit export policy to redistribute eligible non-OSPF routes as external reachability. Fixing that different mechanism would not address the current root cause: junos requires a suitable route export policy to originate eligible non-OSPFv3 routes.

D:

OSPF interarea summary-LSA generation can be governed with supported routing policies on ABRs. Its verification is distinct from the reported condition: An IPv6 static prefix is installed locally but not redistributed to the OSPFv3 domain. The routing change must preserve control-plane consistency across areas.

Question 304

At a university separating multiple OSPF areas, a Junos specialist investigates this scenario: A static route is present in the local Junos routing table but other OSPF routers never learn it. The routing change must preserve control-plane consistency across areas. Which technical mechanism most directly explains the symptom?

  1. The link-state database and area LSA contents determine which routes the OSPF calculation can derive.
  2. A scoped OSPF default-route export can advertise 0.0.0.0/0 when the default is valid.
  3. OSPF automatic cost derives from reference bandwidth, which must be planned consistently in the domain.
  4. Junos OSPF normally requires explicit export policy to redistribute eligible non-OSPF routes as external reachability.

Explanation

Correct Answer

D:

For a university separating multiple OSPF areas, the governing mechanism is: Junos OSPF normally requires explicit export policy to redistribute eligible non-OSPF routes as external reachability. It explains the reported symptom: A static route is present in the local Junos routing table but other OSPF routers never learn it. The intended response is: Create a tightly scoped policy matching the intended static prefix and apply it as an OSPF export policy. Verification: show route protocol ospf on another router reveals the advertised external prefix.

Incorrect Answers

A:

The link-state database and area LSA contents determine which routes the OSPF calculation can derive. This alternative mechanism does not match the current fault.

B:

A scoped OSPF default-route export can advertise 0.0.0.0/0 when the default is valid. Fixing that different mechanism would not address the current root cause: junos OSPF normally requires explicit export policy to redistribute eligible non-OSPF routes as external reachability.

C:

OSPF automatic cost derives from reference bandwidth, which must be planned consistently in the domain. Its verification is distinct from the reported condition: A static route is present in the local Junos routing table but other OSPF routers never learn it. The routing change must preserve control-plane consistency across areas.

Question 305

At a live-event venue using routed multicast streaming, a Junos specialist investigates this scenario: A multicast security policy permits only approved publishers but receivers can still discover an unauthorized source. The change must preserve source identity and avoid multicast loops. For which use case is this feature the best match?

  1. Use multicast source-group policy to restrict who may deliver group traffic.
  2. Use source-group entries to trace a single multicast sender's path.
  3. Use SSM for an application with a known, explicitly selected multicast source.
  4. Use IGMP snooping to constrain Layer 2 multicast distribution to interested ports.

Explanation

Correct Answer

A:

For a live-event venue using routed multicast streaming, this mechanism fits the requirement: Use multicast source-group policy to restrict who may deliver group traffic. The design is appropriate because: PIM and multicast routing policy can be applied to limit permitted source and group reachability. In this scenario, the observed issue is: A multicast security policy permits only approved publishers but receivers can still discover an unauthorized source. The corresponding implementation is: Match and reject the prohibited source-group combinations with a suitable Junos multicast policy.

Incorrect Answers

B:

(S,G) multicast state identifies one particular source S and destination group G. The appropriate correction for the reported case is: Match and reject the prohibited source-group combinations with a suitable Junos multicast policy.

C:

Source-specific multicast uses explicit (S,G) interests and does not require an ASM rendezvous point. Fixing that different mechanism would not address the current root cause: PIM and multicast routing policy can be applied to limit permitted source and group reachability.

D:

IGMP snooping lets a Layer 2 switch learn interested receiver ports and limit multicast flooding within a VLAN. Its verification is distinct from the reported condition: A multicast security policy permits only approved publishers but receivers can still discover an unauthorized source. The change must preserve source identity and avoid multicast loops.

Question 306

At an enterprise core exchanging BGP routes over redundant WAN paths, a Junos specialist investigates this scenario: A session negotiates only a non-IPv4 family and the expected IPv4 unicast routes do not arrive. The chosen route must have a valid data-plane next hop. What verification result should the engineer expect?

  1. The active BGP path reflects eBGP preference only when earlier criteria do not decide first.
  2. The peer exchanges a test IPv4 prefix and the route enters inet.0 when eligible.
  3. An IPv6 test prefix appears in received BGP routes with a reachable IPv6 next hop.
  4. The multi-hop session establishes and uses the intended loopback source and destination.

Explanation

Correct Answer

B:

For an enterprise core exchanging BGP routes over redundant WAN paths, the decisive evidence is: The peer exchanges a test IPv4 prefix and the route enters inet.0 when eligible. This validates the action: Configure the intended inet-unicast family on the authorized BGP peering. Because: BGP NLRI family selection must include inet-unicast for eligible IPv4 unicast prefixes. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

A:

Junos BGP best-path logic generally prefers the external route when preceding comparisons tie. The appropriate correction for the reported case is: Configure the intended inet-unicast family on the authorized BGP peering.

C:

BGP address-family negotiation determines whether IPv6 unicast NLRI can be exchanged. Fixing that different mechanism would not address the current root cause: BGP NLRI family selection must include inet-unicast for eligible IPv4 unicast prefixes.

D:

A nonadjacent eBGP neighbor may require a compatible multihop TTL and suitable route to the remote endpoint. Its verification is distinct from the reported condition: A session negotiates only a non-IPv4 family and the expected IPv4 unicast routes do not arrive. The chosen route must have a valid data-plane next hop.

Question 307

At an enterprise core exchanging BGP routes over redundant WAN paths, a Junos specialist investigates this scenario: A valid BGP path is present but a more preferred static route prevents that BGP path from being advertised. The chosen route must have a valid data-plane next hop. Which design objective is best served by this mechanism?

  1. Use eBGP multihop for intentionally non-direct external BGP peerings.
  2. Use inet6-unicast BGP family to advertise and receive IPv6 network reachability.
  3. Use advertise-inactive selectively when an active static route would suppress BGP advertisement.
  4. Use correct eBGP AS relationships when forming a session with another routing domain.

Explanation

Correct Answer

C:

For an enterprise core exchanging BGP routes over redundant WAN paths, this mechanism fits the requirement: Use advertise-inactive selectively when an active static route would suppress BGP advertisement. The design is appropriate because: Junos normally exports active routes; supported advertise-inactive can announce an eligible inactive BGP route in some cases. In this scenario, the observed issue is: A valid BGP path is present but a more preferred static route prevents that BGP path from being advertised. The corresponding implementation is: Enable advertise-inactive only for the intentional peer context and test its effect.

Incorrect Answers

A:

A nonadjacent eBGP neighbor may require a compatible multihop TTL and suitable route to the remote endpoint. The appropriate correction for the reported case is: Enable advertise-inactive only for the intentional peer context and test its effect.

B:

BGP address-family negotiation determines whether IPv6 unicast NLRI can be exchanged. Fixing that different mechanism would not address the current root cause: junos normally exports active routes; supported advertise-inactive can announce an eligible inactive BGP route in some cases.

D:

BGP OPEN messages carry AS information and external peers must agree on their intended local and remote AS relationship. Its verification is distinct from the reported condition: A valid BGP path is present but a more preferred static route prevents that BGP path from being advertised. The chosen route must have a valid data-plane next hop.

Question 308

At a dual-homed business network peering with two upstream providers, a Junos specialist investigates this scenario: An upstream BGP neighbor must recognize which advertised prefixes belong to a special handling category. The routing policy must retain intended primary and backup paths. What verification result should the engineer expect?

  1. A policy test or advertised-route output confirms restricted prefixes are no longer accepted.
  2. The peer receives only the approved announcements and no internal management subnets.
  3. show bgp neighbor reports Established with the expected external peer AS.
  4. show route extensive or advertised-route output includes the expected community on the intended prefixes.

Explanation

Correct Answer

D:

For a dual-homed business network peering with two upstream providers, the decisive evidence is: show route extensive or advertised-route output includes the expected community on the intended prefixes. This validates the action: Attach a defined community to only the selected prefixes and configure matching remote policy. Because: BGP community attributes carry policy tags that importing or exporting routers can match. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

A:

Junos policy terms are evaluated in configured order and a terminating action can end processing early. The appropriate correction for the reported case is: Attach a defined community to only the selected prefixes and configure matching remote policy.

B:

BGP export policy controls which eligible active routes the speaker announces to selected neighbors. Fixing that different mechanism would not address the current root cause: BGP community attributes carry policy tags that importing or exporting routers can match.

C:

BGP OPEN messages carry AS information and external peers must agree on their intended local and remote AS relationship. Its verification is distinct from the reported condition: An upstream BGP neighbor must recognize which advertised prefixes belong to a special handling category. The routing policy must retain intended primary and backup paths.

Question 309

At a service provider offering isolated VXLAN services, a Junos specialist investigates this scenario: A virtual machine moves between leaf switches but stale remote MAC advertisements keep traffic on the old VTEP. The engineer must verify both BGP EVPN signaling and underlay reachability. When would the described mechanism be appropriate?

  1. Use EVPN MAC mobility signaling when a host changes its overlay attachment location.
  2. Use EVPN type-1 routes for Ethernet segment reachability and efficient multihoming withdrawal.
  3. Use EVPN type-2 routes to announce host MAC and optional IP reachability.
  4. Use EVPN split horizon to prevent bridging loops across dual-homed Ethernet segments.

Explanation

Correct Answer

A:

For a service provider offering isolated VXLAN services, this mechanism fits the requirement: Use EVPN MAC mobility signaling when a host changes its overlay attachment location. The design is appropriate because: EVPN MAC mobility information can signal updated reachability and help distinguish a newer MAC location. In this scenario, the observed issue is: A virtual machine moves between leaf switches but stale remote MAC advertisements keep traffic on the old VTEP. The corresponding implementation is: Verify advertisement and processing of the relevant MAC mobility extended community or sequence information.

Incorrect Answers

B:

EVPN Ethernet Auto-Discovery route type 1 participates in multihoming reachability and mass-withdraw behavior. The appropriate correction for the reported case is: Verify advertisement and processing of the relevant MAC mobility extended community or sequence information.

C:

EVPN route type 2 advertises MAC reachability and can include associated IP information for hosts. Fixing that different mechanism would not address the current root cause: EVPN MAC mobility information can signal updated reachability and help distinguish a newer MAC location.

D:

EVPN multihoming split-horizon mechanisms prevent reflected traffic from looping across a common Ethernet segment. Its verification is distinct from the reported condition: A virtual machine moves between leaf switches but stale remote MAC advertisements keep traffic on the old VTEP. The engineer must verify both BGP EVPN signaling and underlay reachability. When would the described mechanism be appropriate.

Question 310

At a dual-homed business network peering with two upstream providers, a Junos specialist investigates this scenario: A route filter intended to allow a single aggregate accidentally accepts many more-specific customer prefixes. The routing policy must retain intended primary and backup paths. What protocol behavior accounts for this failure?

  1. In Junos BGP best-path selection an eligible shorter AS path is generally preferred after higher-priority criteria tie.
  2. Junos route filters distinguish exact matching from longer or longer-prefix patterns.
  3. BGP export policy controls which eligible active routes the speaker announces to selected neighbors.
  4. A BGP prefix-limit control detects or constrains excessive received NLRI from a peer.

Explanation

Correct Answer

B:

For a dual-homed business network peering with two upstream providers, the governing mechanism is: Junos route filters distinguish exact matching from longer or longer-prefix patterns. It explains the reported symptom: A route filter intended to allow a single aggregate accidentally accepts many more-specific customer prefixes. The intended response is: Choose exact or bounded prefix-length matching appropriate to the advertisement contract. Verification: Only intended prefix lengths pass the import or export policy.

Incorrect Answers

A:

In Junos BGP best-path selection an eligible shorter AS path is generally preferred after higher-priority criteria tie. This alternative mechanism does not match the current fault.

C:

BGP export policy controls which eligible active routes the speaker announces to selected neighbors. Fixing that different mechanism would not address the current root cause: junos route filters distinguish exact matching from longer or longer-prefix patterns.

D:

A BGP prefix-limit control detects or constrains excessive received NLRI from a peer. Its verification is distinct from the reported condition: A route filter intended to allow a single aggregate accidentally accepts many more-specific customer prefixes. The routing policy must retain intended primary and backup paths.

Enterprise Routing and Switching, Professional (JNCIP-ENT) (JN0-650) Practice Tests