mcAfee Secure Website
exam =5
exam =6

Exam Code: JN0-650

Exam Name: Enterprise Routing and Switching, Professional (JNCIP-ENT)

Certification Provider: Juniper

Corresponding Certification: JNCIP-ENT

Juniper JN0-650 Questions & Answers

Reliable & Actual Study Materials for JN0-650 Exam Success

107 Questions & Answers with Testing Engine

"JN0-650: Enterprise Routing and Switching, Professional (JNCIP-ENT)" Testing Engine covers all the knowledge points of the real Juniper JN0-650 exam.

The latest actual JN0-650 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at JN0-650 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Juniper Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Juniper JN0-650 Practice Test 20

Question 190

At a branch introducing an IP telephony access layer, a Junos specialist investigates this scenario: A technician plugs a phone into the wrong switch port and cannot identify its actual neighbor from cabling records. The solution should not give workstation traffic untrusted voice privileges. What risk must the implementation avoid?

  1. Do not exceed chassis supply or line-card power availability based only on per-port ratings.
  2. Do not expose sensitive topology details on untrusted external facing interfaces without policy.
  3. Confirm phone model and manufacturer support instead of assuming all endpoints interpret MED TLVs.
  4. Verify 802.1X and MAC RADIUS behavior separately for phone and PC identities.

Explanation

Correct Answer

B:

For a branch introducing an IP telephony access layer, the relevant safeguard is: Do not expose sensitive topology details on untrusted external facing interfaces without policy. It matters while implementing: Enable supported LLDP on authorized interfaces and inspect neighbor information. The fault involves: Link Layer Discovery Protocol advertises local chassis and port information to directly attached compatible devices. The required acceptance result remains: show lldp neighbors identifies the intended adjacent device and receiving port.

Incorrect Answers

A:

PoE availability depends on available switch power budget and each attached device's negotiated consumption. The appropriate correction for the reported case is: Do not expose sensitive topology details on untrusted external facing interfaces without policy.

C:

LLDP-MED network policy information can advertise voice VLAN and QoS settings to compatible phones. Fixing that different mechanism would not address the current root cause: Link Layer Discovery Protocol advertises local chassis and port information to directly attached compatible devices.

D:

An Ethernet phone can bridge tagged voice traffic and untagged workstation traffic with appropriate VLAN behavior. Its verification is distinct from the reported condition: A technician plugs a phone into the wrong switch port and cannot identify its actual neighbor from cabling records. The solution should not give workstation traffic untrusted voice privileges.

Question 191

At an enterprise migrating virtual machines between racks, a Junos specialist investigates this scenario: EVPN route advertisements are received but encapsulated VXLAN data packets fail between leaf switches. The overlay must relearn host reachability without stale tunnel selection. What is the most appropriate correction to implement?

  1. Align the intended VLAN-to-VNI mapping across participating leaf switches.
  2. Enable a supported EVPN BGP signaling relationship with the intended route targets and instances.
  3. Repair underlay routes, relevant UDP encapsulation permission and VTEP reachability.
  4. Configure supported all-active Ethernet segment multihoming and consistent ESI state.

Explanation

Correct Answer

C:

For an enterprise migrating virtual machines between racks, the direct corrective action is: Repair underlay routes, relevant UDP encapsulation permission and VTEP reachability. This addresses the mechanism: VXLAN tunnels require IP reachability between VTEP addresses and adequate underlay transport capacity. Confirm by checking: A test VXLAN packet reaches the remote VTEP with successful decapsulation and host delivery. During rollout, account for overlay encapsulation MTU overhead and underlay ECMP path symmetry.

Incorrect Answers

A:

VXLAN uses a 24-bit VNI to identify a logical overlay segment associated with local bridging context. The appropriate correction for the reported case is: Repair underlay routes, relevant UDP encapsulation permission and VTEP reachability.

B:

EVPN uses a BGP signaling address family to distribute Ethernet reachability and related control-plane information. Fixing that different mechanism would not address the current root cause: VXLAN tunnels require IP reachability between VTEP addresses and adequate underlay transport capacity.

D:

EVPN all-active multihoming permits multiple PEs to forward eligible known-unicast traffic with appropriate control-plane loop prevention. Its verification is distinct from the reported condition: EVPN route advertisements are received but encapsulated VXLAN data packets fail between leaf switches. The overlay must relearn host reachability without stale tunnel selection.

Question 192

At a university separating multiple OSPF areas, a Junos specialist investigates this scenario: An IPv6 static prefix is installed locally but not redistributed to the OSPFv3 domain. The routing change must preserve control-plane consistency across areas. Which operational result would most clearly confirm the fix?

  1. show ospf database and downstream routes reflect only the approved summaries.
  2. Remote areas receive the expected summarized routes and excluded addresses do not blackhole.
  3. OSPF topology and route-change counters settle after fault correction.
  4. Other OSPFv3 routers learn the specified external IPv6 prefix without unrelated statics.

Explanation

Correct Answer

D:

For a university separating multiple OSPF areas, the decisive evidence is: Other OSPFv3 routers learn the specified external IPv6 prefix without unrelated statics. This validates the action: Match the intended IPv6 static route in a scoped export policy under the OSPFv3 process. Because: Junos requires a suitable route export policy to originate eligible non-OSPFv3 routes. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

A:

OSPF interarea summary-LSA generation can be governed with supported routing policies on ABRs. The appropriate correction for the reported case is: Match the intended IPv6 static route in a scoped export policy under the OSPFv3 process.

B:

An OSPF area border router can originate summarized interarea reachability when prefixes allow aggregation. Fixing that different mechanism would not address the current root cause: junos requires a suitable route export policy to originate eligible non-OSPFv3 routes.

C:

Link-state SPF recalculation is triggered by topology changes and must converge over a coherent LSDB. Its verification is distinct from the reported condition: An IPv6 static prefix is installed locally but not redistributed to the OSPFv3 domain. The routing change must preserve control-plane consistency across areas.

Question 193

At a regional provider operating Junos-based branch routers, a Junos specialist investigates this scenario: A legacy area requires backbone reachability through a transit area while direct area-zero attachment is temporarily unavailable. The team must validate neighbor state rather than assume basic IP reachability proves routing. What would demonstrate a successful correction under test?

  1. The virtual link reaches the expected operational state and the remote area receives backbone routes.
  2. An IPv6 destination installs with an expected link-local next hop and forwards successfully.
  3. show ospf database and downstream routes reflect only the approved summaries.
  4. Branch routers receive a default route and reach the approved upstream network.

Explanation

Correct Answer

A:

For a regional provider operating Junos-based branch routers, the decisive evidence is: The virtual link reaches the expected operational state and the remote area receives backbone routes. This validates the action: Configure the same transit area and peer router identifiers at both virtual-link endpoints. Because: A supported OSPF virtual link can logically extend the backbone through a nonstub transit area between eligible ABRs. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

B:

OSPFv3 neighbor exchanges and next-hop forwarding commonly use IPv6 link-local addresses on the adjoining link. The appropriate correction for the reported case is: Configure the same transit area and peer router identifiers at both virtual-link endpoints.

C:

OSPF interarea summary-LSA generation can be governed with supported routing policies on ABRs. Fixing that different mechanism would not address the current root cause: a supported OSPF virtual link can logically extend the backbone through a nonstub transit area between eligible ABRs.

D:

A scoped OSPF default-route export can advertise 0.0.0.0/0 when the default is valid. Its verification is distinct from the reported condition: A legacy area requires backbone reachability through a transit area while direct area-zero attachment is temporarily unavailable. The team must validate neighbor state rather than assume basic IP reachability proves routing.

Question 194

At an enterprise core exchanging BGP routes over redundant WAN paths, a Junos specialist investigates this scenario: Two candidate BGP routes have equal local preference and differ primarily in the number of AS hops. The chosen route must have a valid data-plane next hop. Which underlying distinction should guide troubleshooting?

  1. AS-path prepending lengthens a path in selected outbound advertisements and may influence upstream BGP selection.
  2. In Junos BGP best-path selection an eligible shorter AS path is generally preferred after higher-priority criteria tie.
  3. BGP MED can signal a preferred ingress point to a neighboring AS subject to the neighbor's selection policy.
  4. BGP export policy controls which eligible active routes the speaker announces to selected neighbors.

Explanation

Correct Answer

B:

For an enterprise core exchanging BGP routes over redundant WAN paths, the governing mechanism is: In Junos BGP best-path selection an eligible shorter AS path is generally preferred after higher-priority criteria tie. It explains the reported symptom: Two candidate BGP routes have equal local preference and differ primarily in the number of AS hops. The intended response is: Inspect AS-path attributes and modify permitted policy only if a different transit choice is justified. Verification: show route protocol BGP reveals the selected path and its AS-path sequence.

Incorrect Answers

A:

AS-path prepending lengthens a path in selected outbound advertisements and may influence upstream BGP selection. This alternative mechanism does not match the current fault.

C:

BGP MED can signal a preferred ingress point to a neighboring AS subject to the neighbor's selection policy. Fixing that different mechanism would not address the current root cause: In Junos BGP best-path selection an eligible shorter AS path is generally preferred after higher-priority criteria tie.

D:

BGP export policy controls which eligible active routes the speaker announces to selected neighbors. Its verification is distinct from the reported condition: Two candidate BGP routes have equal local preference and differ primarily in the number of AS hops. The chosen route must have a valid data-plane next hop.

Question 195

At a managed office network with printers and laptops, a Junos specialist investigates this scenario: A managed supplicant responds to 802.1X but provides invalid credentials and must not enter the corporate VLAN. The switch must distinguish identity failures from absent authentication responses. Which limitation should guide the change control?

  1. Test device and Junos release support before assuming every simultaneous combination is available.
  2. Do not assume a wrong-password response triggers the same behavior as complete nonresponse.
  3. Do not grant full access merely because the client can exchange EAP packets.
  4. Avoid mixing MAC RADIUS and captive portal unsupported modes without required 802.1X handling.

Explanation

Correct Answer

C:

For a managed office network with printers and laptops, the relevant safeguard is: Do not grant full access merely because the client can exchange EAP packets. It matters while implementing: Configure supported server-reject access behavior and a restricted reject VLAN policy. The fault involves: A RADIUS Access-Reject event is distinct from a silent client and can be mapped to an appropriate reject VLAN. The required acceptance result remains: The wrong-credential test client reaches only the intended reject services and not protected LANs.

Incorrect Answers

A:

Multiple authentication methods can have defined precedence and permitted fallback behavior depending on endpoint response. The appropriate correction for the reported case is: Do not grant full access merely because the client can exchange EAP packets.

B:

A guest VLAN can supply restricted access for supported nonresponsive clients when the authentication mode allows it. Fixing that different mechanism would not address the current root cause: a RADIUS Access-Reject event is distinct from a silent client and can be mapped to an appropriate reject VLAN.

D:

Captive portal authentication can redirect eligible unauthenticated traffic to an approved web-based onboarding flow. Its verification is distinct from the reported condition: A managed supplicant responds to 802.1X but provides invalid credentials and must not enter the corporate VLAN. The switch must distinguish identity failures from absent authentication responses.

Question 196

At a service provider offering isolated VXLAN services, a Junos specialist investigates this scenario: Two VTEPs reach each other but a tenant VLAN crosses into the wrong remote Ethernet segment. The engineer must verify both BGP EVPN signaling and underlay reachability. Which limitation should guide the change control?

  1. Coordinate access-side LAG and platform semantics before mixing single-active and all-active policies.
  2. Verify IRB and route-target configuration and avoid leaking unrelated tenant subnets.
  3. Account for overlay encapsulation MTU overhead and underlay ECMP path symmetry.
  4. Avoid reusing one VNI for unrelated tenant isolation boundaries.

Explanation

Correct Answer

D:

For a service provider offering isolated VXLAN services, the relevant safeguard is: Avoid reusing one VNI for unrelated tenant isolation boundaries. It matters while implementing: Align the intended VLAN-to-VNI mapping across participating leaf switches. The fault involves: VXLAN uses a 24-bit VNI to identify a logical overlay segment associated with local bridging context. The required acceptance result remains: A test host in one VLAN exchanges frames only with its matching remote VNI segment.

Incorrect Answers

A:

EVPN single-active multihoming restricts the forwarding role on an Ethernet segment to a selected active PE. The appropriate correction for the reported case is: Avoid reusing one VNI for unrelated tenant isolation boundaries.

B:

EVPN route type 5 conveys IP prefix reachability and can support routed overlay designs. Fixing that different mechanism would not address the current root cause: VXLAN uses a 24-bit VNI to identify a logical overlay segment associated with local bridging context.

C:

VXLAN tunnels require IP reachability between VTEP addresses and adequate underlay transport capacity. Its verification is distinct from the reported condition: Two VTEPs reach each other but a tenant VLAN crosses into the wrong remote Ethernet segment. The engineer must verify both BGP EVPN signaling and underlay reachability.

Question 197

At a managed network team troubleshooting an internet edge, a Junos specialist investigates this scenario: A neighbor mistakenly announces hundreds of thousands of unexpected routes and threatens routing memory. The diagnosis must distinguish a healthy BGP session from eligible received routes. For which use case is this feature the best match?

  1. Use BGP prefix limits to protect route-table capacity from excessive peer announcements.
  2. Use route-filter match semantics to prevent unintended more-specific route leaks.
  3. Use selective damping when repeated instability warrants controlled suppression.
  4. Use eBGP multihop for intentionally non-direct external BGP peerings.

Explanation

Correct Answer

A:

For a managed network team troubleshooting an internet edge, this mechanism fits the requirement: Use BGP prefix limits to protect route-table capacity from excessive peer announcements. The design is appropriate because: A BGP prefix-limit control detects or constrains excessive received NLRI from a peer. In this scenario, the observed issue is: A neighbor mistakenly announces hundreds of thousands of unexpected routes and threatens routing memory. The corresponding implementation is: Configure reasonable warning and hard limits appropriate to each authorized address family.

Incorrect Answers

B:

Junos route filters distinguish exact matching from longer or longer-prefix patterns. The appropriate correction for the reported case is: Configure reasonable warning and hard limits appropriate to each authorized address family.

C:

Route-flap damping can suppress repeatedly changing paths according to configured penalties and reuse rules. Fixing that different mechanism would not address the current root cause: a BGP prefix-limit control detects or constrains excessive received NLRI from a peer.

D:

A nonadjacent eBGP neighbor may require a compatible multihop TTL and suitable route to the remote endpoint. Its verification is distinct from the reported condition: A neighbor mistakenly announces hundreds of thousands of unexpected routes and threatens routing memory. The diagnosis must distinguish a healthy BGP session from eligible received routes.

Question 198

At a healthcare organization connecting redundant facilities, a Junos specialist investigates this scenario: An enterprise creates nonbackbone OSPF areas that cannot exchange routes through the backbone. The correction must not expose administrative network prefixes. What is the most appropriate correction to implement?

  1. Choose the intended external metric type for the redistributed prefix and validate path selection.
  2. Connect the appropriate area border routers to area 0 and repair the multi-area topology.
  3. Apply the policy at the hierarchy appropriate to redistribution rather than assuming import creates advertisements.
  4. Assign the connecting interfaces to the same intended OSPF area and validate the area boundary design.

Explanation

Correct Answer

B:

For a healthcare organization connecting redundant facilities, the direct corrective action is: Connect the appropriate area border routers to area 0 and repair the multi-area topology. This addresses the mechanism: OSPF interarea routing normally relies on connectivity through area 0 and correctly placed area border routers. Confirm by checking: Interarea routes appear in expected areas with valid backbone reachability. During rollout, do not rely on arbitrary area-to-area links to replace a valid backbone design.

Incorrect Answers

A:

Type-1 external OSPF cost includes internal cost to the ASBR while type-2 primarily uses the external metric for selection. The appropriate correction for the reported case is: Connect the appropriate area border routers to area 0 and repair the multi-area topology.

C:

Junos OSPF export governs eligible external route origination while import filtering has different route-selection effects. Fixing that different mechanism would not address the current root cause: OSPF interarea routing normally relies on connectivity through area 0 and correctly placed area border routers.

D:

OSPF neighbors on a common link must agree on the area identifier used in Hello processing. Its verification is distinct from the reported condition: An enterprise creates nonbackbone OSPF areas that cannot exchange routes through the backbone. The correction must not expose administrative network prefixes.

Question 199

At a managed network team troubleshooting an internet edge, a Junos specialist investigates this scenario: A BGP update arrives containing the receiver's own AS in the AS-path and is rejected. The diagnosis must distinguish a healthy BGP session from eligible received routes. Which underlying distinction should guide troubleshooting?

  1. Junos route filters distinguish exact matching from longer or longer-prefix patterns.
  2. BGP OPEN messages carry AS information and external peers must agree on their intended local and remote AS relationship.
  3. BGP AS-path loop detection normally prevents accepting routes already traversing the local autonomous system.
  4. A BGP prefix-limit control detects or constrains excessive received NLRI from a peer.

Explanation

Correct Answer

C:

For a managed network team troubleshooting an internet edge, the governing mechanism is: BGP AS-path loop detection normally prevents accepting routes already traversing the local autonomous system. It explains the reported symptom: A BGP update arrives containing the receiver's own AS in the AS-path and is rejected. The intended response is: Correct the unintended AS-path manipulation or routing leak rather than disabling loop protection. Verification: The revised advertisement no longer contains an invalid local-AS loop and becomes eligible.

Incorrect Answers

A:

Junos route filters distinguish exact matching from longer or longer-prefix patterns. This alternative mechanism does not match the current fault.

B:

BGP OPEN messages carry AS information and external peers must agree on their intended local and remote AS relationship. Fixing that different mechanism would not address the current root cause: BGP AS-path loop detection normally prevents accepting routes already traversing the local autonomous system.

D:

A BGP prefix-limit control detects or constrains excessive received NLRI from a peer. Its verification is distinct from the reported condition: A BGP update arrives containing the receiver's own AS in the AS-path and is rejected. The diagnosis must distinguish a healthy BGP session from eligible received routes.

Question 200

At a dual-homed business network peering with two upstream providers, a Junos specialist investigates this scenario: A BGP update is received but appears hidden because the announced next-hop address cannot be resolved in the routing table. The routing policy must retain intended primary and backup paths. Which limitation should guide the change control?

  1. Account for protocol default export rules and route activity before assuming all table entries advertise.
  2. Avoid broad allow-as-in exceptions without a documented multi-AS design.
  3. Confirm the advertising router actually has valid egress before making it a transit hop.
  4. Avoid setting next hop to self without confirming the chosen egress can actually forward the traffic.

Explanation

Correct Answer

D:

For a dual-homed business network peering with two upstream providers, the relevant safeguard is: Avoid setting next hop to self without confirming the chosen egress can actually forward the traffic. It matters while implementing: Repair the underlay route to the received BGP next hop or apply a deliberate next-hop policy. The fault involves: A usable BGP route requires an eligible reachable forwarding next hop before it can become active. The required acceptance result remains: show route hidden detail no longer reports an unreachable next hop and the prefix becomes eligible.

Incorrect Answers

A:

BGP export policy controls which eligible active routes the speaker announces to selected neighbors. The appropriate correction for the reported case is: Avoid setting next hop to self without confirming the chosen egress can actually forward the traffic.

B:

BGP AS-path loop detection normally prevents accepting routes already traversing the local autonomous system. Fixing that different mechanism would not address the current root cause: a usable BGP route requires an eligible reachable forwarding next hop before it can become active.

C:

IBGP propagation may retain the original eBGP next-hop attribute unless policy or configuration changes it. Its verification is distinct from the reported condition: A BGP update is received but appears hidden because the announced next-hop address cannot be resolved in the routing table. The routing policy must retain intended primary and backup paths.

Enterprise Routing and Switching, Professional (JNCIP-ENT) (JN0-650) Practice Tests