mcAfee Secure Website
exam =5
exam =6

Exam Code: JN0-650

Exam Name: Enterprise Routing and Switching, Professional (JNCIP-ENT)

Certification Provider: Juniper

Corresponding Certification: JNCIP-ENT

Juniper JN0-650 Questions & Answers

Reliable & Actual Study Materials for JN0-650 Exam Success

107 Questions & Answers with Testing Engine

"JN0-650: Enterprise Routing and Switching, Professional (JNCIP-ENT)" Testing Engine covers all the knowledge points of the real Juniper JN0-650 exam.

The latest actual JN0-650 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at JN0-650 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Juniper Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Juniper JN0-650 Practice Test 18

Question 170

At a branch router serving several application classes, a Junos specialist investigates this scenario: A busy output queue suffers severe tail drop and interactive applications need controlled early loss behavior. The team must validate packet drops by actual queue statistics. What is the most appropriate correction to implement?

  1. Attach the intended scheduler map to the correct supported egress interface.
  2. Apply a suitable RED or weighted drop profile through the appropriate scheduler.
  3. Configure an appropriate constrained high-priority scheduler for the approved real-time class.
  4. Apply a supported DSCP rewrite rule on the designated egress interface.

Explanation

Correct Answer

B:

For a branch router serving several application classes, the direct corrective action is: Apply a suitable RED or weighted drop profile through the appropriate scheduler. This addresses the mechanism: A Junos drop profile can define queue occupancy thresholds and drop probabilities before absolute congestion. Confirm by checking: Congestion tests show the intended early-drop curve without unbounded queue growth. During rollout, avoid aggressive early drops that harm short or sensitive application flows.

Incorrect Answers

A:

A scheduler map must be associated with the appropriate interface for selected class-to-scheduler behavior. The appropriate correction for the reported case is: Apply a suitable RED or weighted drop profile through the appropriate scheduler.

C:

A scheduler can prioritize selected latency-sensitive queues over other queues when the interface is congested. Fixing that different mechanism would not address the current root cause: a Junos drop profile can define queue occupancy thresholds and drop probabilities before absolute congestion.

D:

Junos rewrite rules map internal forwarding class and loss-priority information to outgoing packet codepoints. Its verification is distinct from the reported condition: A busy output queue suffers severe tail drop and interactive applications need controlled early loss behavior. The team must validate packet drops by actual queue statistics.

Question 171

At a university separating multiple OSPF areas, a Junos specialist investigates this scenario: Repeated topology flaps produce transient internal route changes and high routing-process load. The routing change must preserve control-plane consistency across areas. Which limitation should guide the change control?

  1. Coordinate identity changes because LSAs and neighbor databases can be rebuilt.
  2. Limit logging rate and storage consumption in production while collecting traces.
  3. Do not hide an actual failing link solely by increasing timers.
  4. Verify both ends and vendor interoperability before changing interface type.

Explanation

Correct Answer

C:

For a university separating multiple OSPF areas, the relevant safeguard is: Do not hide an actual failing link solely by increasing timers. It matters while implementing: Find the unstable interface or neighbor and stabilize its physical or protocol conditions. The fault involves: Link-state SPF recalculation is triggered by topology changes and must converge over a coherent LSDB. The required acceptance result remains: OSPF topology and route-change counters settle after fault correction.

Incorrect Answers

A:

The OSPF router ID uniquely identifies an originator of link-state information within the routing domain. The appropriate correction for the reported case is: Do not hide an actual failing link solely by increasing timers.

B:

Junos routing traceoptions can record protocol events for focused diagnosis when enabled carefully. Fixing that different mechanism would not address the current root cause: link-state SPF recalculation is triggered by topology changes and must converge over a coherent LSDB.

D:

OSPF interface network type influences neighbor formation and whether DR and BDR election is used. Its verification is distinct from the reported condition: Repeated topology flaps produce transient internal route changes and high routing-process load. The routing change must preserve control-plane consistency across areas.

Question 172

At a campus network built with Juniper EX switches, a Junos specialist investigates this scenario: Two VLANs need different active Layer 2 paths but use one common spanning-tree root everywhere. The intended segmentation and loop prevention must remain intact. Which configuration adjustment should be made first to address this issue?

  1. Increase supported link MTU consistently or adjust customer frame limits where required.
  2. Apply suitable storm-control thresholds to the affected edge ports.
  3. Set the intended VLAN membership on the access logical interface and verify the port mode.
  4. Configure supported VSTP membership and root priorities for the chosen VLANs.

Explanation

Correct Answer

D:

For a campus network built with Juniper EX switches, the direct corrective action is: Configure supported VSTP membership and root priorities for the chosen VLANs. This addresses the mechanism: VLAN Spanning Tree Protocol allows separate tree instances for selected VLANs and can choose different roots. Confirm by checking: Each VLAN shows the intended root and blocked ports without creating a loop. During rollout, validate interoperability with non-VSTP neighbors before splitting root placement.

Incorrect Answers

A:

Adding an outer VLAN tag increases Ethernet frame size and may exceed an interface's supported MTU. The appropriate correction for the reported case is: Configure supported VSTP membership and root priorities for the chosen VLANs.

B:

Layer 2 storm control limits specified excessive broadcast or multicast traffic on a port. Fixing that different mechanism would not address the current root cause: VLAN Spanning Tree Protocol allows separate tree instances for selected VLANs and can choose different roots.

C:

An untagged Ethernet access port places endpoint traffic into its configured access VLAN. Its verification is distinct from the reported condition: Two VLANs need different active Layer 2 paths but use one common spanning-tree root everywhere. The intended segmentation and loop prevention must remain intact.

Question 173

At an enterprise telemetry network with multicast subscribers, a Junos specialist investigates this scenario: A multicast receiver fails even though unicast pings and IGMP joins look healthy. The team should test joins and forwarding separately. What protocol behavior accounts for this failure?

  1. Multicast forwarding depends on per-group and per-source route state in addition to host membership.
  2. IGMP membership maintenance relies on periodic queries from a suitable multicast querier.
  3. In PIM sparse-mode ASM, a first-hop designated router can register new source traffic with the RP.
  4. IPv4 multicast traffic uses group addresses from 224.0.0.0 through 239.255.255.255 rather than ordinary unicast host destinations.

Explanation

Correct Answer

A:

For an enterprise telemetry network with multicast subscribers, the governing mechanism is: Multicast forwarding depends on per-group and per-source route state in addition to host membership. It explains the reported symptom: A multicast receiver fails even though unicast pings and IGMP joins look healthy. The intended response is: Inspect multicast route, upstream interface and output interface list for the failed group. Verification: The expected multicast forwarding entry contains its correct upstream and downstream interfaces.

Incorrect Answers

B:

IGMP membership maintenance relies on periodic queries from a suitable multicast querier. This alternative mechanism does not match the current fault.

C:

In PIM sparse-mode ASM, a first-hop designated router can register new source traffic with the RP. Fixing that different mechanism would not address the current root cause: multicast forwarding depends on per-group and per-source route state in addition to host membership.

D:

IPv4 multicast traffic uses group addresses from 224.0.0.0 through 239.255.255.255 rather than ordinary unicast host destinations. Its verification is distinct from the reported condition: A multicast receiver fails even though unicast pings and IGMP joins look healthy. The team should test joins and forwarding separately.

Question 174

At an enterprise replacing legacy IP handsets, a Junos specialist investigates this scenario: An IP phone and a computer share an access port but both are placed in the same data segment against policy. The team must check phone support and PoE capacity before cutover. Which precaution should be checked before committing the change?

  1. Do not blindly trust DSCP or 802.1p markings from untrusted downstream computers.
  2. Check access policy and trunk tagging without granting the PC unauthorized voice-network privileges.
  3. Confirm phone model and manufacturer support instead of assuming all endpoints interpret MED TLVs.
  4. Do not expose sensitive topology details on untrusted external facing interfaces without policy.

Explanation

Correct Answer

B:

For an enterprise replacing legacy IP handsets, the relevant safeguard is: Check access policy and trunk tagging without granting the PC unauthorized voice-network privileges. It matters while implementing: Configure the intended voice VLAN and data VLAN relationship on the shared access connection. The fault involves: A voice VLAN permits supported tagged phone traffic to use a separate VLAN from ordinary untagged data traffic. The required acceptance result remains: Voice traffic uses the approved tagged VLAN while the PC remains in the data VLAN.

Incorrect Answers

A:

Voice VLAN tagging and QoS classification must be mapped to the correct switch forwarding treatment. The appropriate correction for the reported case is: Check access policy and trunk tagging without granting the PC unauthorized voice-network privileges.

C:

LLDP-MED network policy information can advertise voice VLAN and QoS settings to compatible phones. Fixing that different mechanism would not address the current root cause: a voice VLAN permits supported tagged phone traffic to use a separate VLAN from ordinary untagged data traffic.

D:

Link Layer Discovery Protocol advertises local chassis and port information to directly attached compatible devices. Its verification is distinct from the reported condition: An IP phone and a computer share an access port but both are placed in the same data segment against policy. The team must check phone support and PoE capacity before cutover.

Question 175

At a campus distributing IP video to several buildings, a Junos specialist investigates this scenario: Traffic continues on a downstream path after the final interested receiver leaves the group. The group traffic must reach interested receivers without flooding other locations. Which operational change most directly resolves the observed failure?

  1. Enable the supported SPT behavior and verify source-directed joins where appropriate.
  2. Configure or correct the intended RP mapping for the affected group range throughout the domain.
  3. Inspect and correct downstream receiver removal and upstream PIM prune processing.
  4. Correct the unicast route or multicast RPF path so the packet arrives on the accepted upstream interface.

Explanation

Correct Answer

C:

For a campus distributing IP video to several buildings, the direct corrective action is: Inspect and correct downstream receiver removal and upstream PIM prune processing. This addresses the mechanism: PIM Join and Prune signaling maintains or removes forwarding-tree state as downstream interest changes. Confirm by checking: The unneeded branch ages out or prunes while other receiver branches remain active. During rollout, avoid treating a local leave as proof that the entire multicast source tree should stop.

Incorrect Answers

A:

PIM-SM can transition selected traffic from an RP-rooted shared tree to a source-rooted shortest-path tree. The appropriate correction for the reported case is: Inspect and correct downstream receiver removal and upstream PIM prune processing.

B:

PIM-SM shared-tree construction depends on consistent mappings of multicast groups to suitable RPs. Fixing that different mechanism would not address the current root cause: PIM Join and Prune signaling maintains or removes forwarding-tree state as downstream interest changes.

D:

Multicast reverse-path forwarding verifies that a packet arrives via a valid route back toward its source or RP. Its verification is distinct from the reported condition: Traffic continues on a downstream path after the final interested receiver leaves the group. The group traffic must reach interested receivers without flooding other locations.

Question 176

At a university separating multiple OSPF areas, a Junos specialist investigates this scenario: A shared Ethernet OSPF segment has more adjacencies than planned and the chosen designated router is unsuitable. The routing change must preserve control-plane consistency across areas. For which use case is this feature the best match?

  1. Use OSPF authentication to control trusted routing neighbors on supported links.
  2. Use OSPF ABR summary policy to control which interarea prefixes propagate.
  3. Use OSPF traceoptions for short targeted troubleshooting of protocol state transitions.
  4. Use DR and BDR selection on an OSPF broadcast multiaccess segment.

Explanation

Correct Answer

D:

For a university separating multiple OSPF areas, this mechanism fits the requirement: Use DR and BDR selection on an OSPF broadcast multiaccess segment. The design is appropriate because: On broadcast multiaccess networks OSPF elects a designated router and backup designated router to manage adjacencies. In this scenario, the observed issue is: A shared Ethernet OSPF segment has more adjacencies than planned and the chosen designated router is unsuitable. The corresponding implementation is: Review interface priority and network type so appropriate eligible routers become DR and BDR.

Incorrect Answers

A:

OSPF protocol authentication checks configured credentials for applicable neighbor exchanges. The appropriate correction for the reported case is: Review interface priority and network type so appropriate eligible routers become DR and BDR.

B:

OSPF interarea summary-LSA generation can be governed with supported routing policies on ABRs. Fixing that different mechanism would not address the current root cause: on broadcast multiaccess networks OSPF elects a designated router and backup designated router to manage adjacencies.

C:

Junos routing traceoptions can record protocol events for focused diagnosis when enabled carefully. Its verification is distinct from the reported condition: A shared Ethernet OSPF segment has more adjacencies than planned and the chosen designated router is unsuitable. The routing change must preserve control-plane consistency across areas.

Question 177

At a provider Ethernet network carrying customer Layer 2 services, a Junos specialist investigates this scenario: Many VLANs should share a small number of spanning-tree topologies but currently use separate inconsistent path designs. The service must preserve tags without bridging unrelated tenants. Which design objective is best served by this mechanism?

  1. Use MSTP instance mapping to scale spanning-tree topologies for many VLANs.
  2. Use a private VLAN promiscuous port to provide common gateway access.
  3. Use access VLAN assignment for a single untagged user segment.
  4. Account for Q-in-Q encapsulation overhead when planning L2 transport MTU.

Explanation

Correct Answer

A:

For a provider Ethernet network carrying customer Layer 2 services, this mechanism fits the requirement: Use MSTP instance mapping to scale spanning-tree topologies for many VLANs. The design is appropriate because: Multiple Spanning Tree Protocol maps selected VLANs into common spanning-tree instances. In this scenario, the observed issue is: Many VLANs should share a small number of spanning-tree topologies but currently use separate inconsistent path designs. The corresponding implementation is: Assign the appropriate VLANs to the intended MST instances and set designated roots.

Incorrect Answers

B:

Private VLAN promiscuous ports can communicate with applicable secondary VLAN ports, providing a shared exit. The appropriate correction for the reported case is: Assign the appropriate VLANs to the intended MST instances and set designated roots.

C:

An untagged Ethernet access port places endpoint traffic into its configured access VLAN. Fixing that different mechanism would not address the current root cause: Multiple Spanning Tree Protocol maps selected VLANs into common spanning-tree instances.

D:

Adding an outer VLAN tag increases Ethernet frame size and may exceed an interface's supported MTU. Its verification is distinct from the reported condition: Many VLANs should share a small number of spanning-tree topologies but currently use separate inconsistent path designs. The service must preserve tags without bridging unrelated tenants.

Question 178

At a large organization using Junos route reflectors, a Junos specialist investigates this scenario: A BGP import policy changes but the operator wants to re-evaluate learned routes without tearing down a healthy peering. The change must not introduce an unwanted autonomous-system route leak. What important rollout safeguard is most relevant here?

  1. Do not claim origin always wins over local preference or AS-path length.
  2. Confirm negotiated refresh capability and test policy syntax before reprocessing large tables.
  3. Review dual-stack prefixes and boundary masks before applying generalized longer matches.
  4. Preserve reflector redundancy and cluster design to avoid hidden routing loops.

Explanation

Correct Answer

B:

For a large organization using Junos route reflectors, the relevant safeguard is: Confirm negotiated refresh capability and test policy syntax before reprocessing large tables. It matters while implementing: Request a supported inbound route refresh for the affected peer after validating the new policy. The fault involves: BGP route refresh permits eligible peers to request readvertisement after policy changes when both support it. The required acceptance result remains: Accepted routes reflect the updated policy while the TCP/BGP session remains Established.

Incorrect Answers

A:

BGP best-path selection considers origin type after higher-priority attributes, normally preferring IGP over EGP over incomplete. The appropriate correction for the reported case is: Confirm negotiated refresh capability and test policy syntax before reprocessing large tables.

C:

Junos route filters distinguish exact matching from longer or longer-prefix patterns. Fixing that different mechanism would not address the current root cause: BGP route refresh permits eligible peers to request readvertisement after policy changes when both support it.

D:

Ordinary iBGP split-horizon rules avoid re-advertising routes between iBGP peers; route reflectors provide controlled reflection. Its verification is distinct from the reported condition: A BGP import policy changes but the operator wants to re-evaluate learned routes without tearing down a healthy peering. The change must not introduce an unwanted autonomous-system route leak.

Question 179

At a managed network team troubleshooting an internet edge, a Junos specialist investigates this scenario: A valid BGP path is present but a more preferred static route prevents that BGP path from being advertised. The diagnosis must distinguish a healthy BGP session from eligible received routes. Which response best restores the intended behavior?

  1. Apply targeted AS-path prepend in an authorized export policy for the backup link.
  2. Choose exact or bounded prefix-length matching appropriate to the advertisement contract.
  3. Enable advertise-inactive only for the intentional peer context and test its effect.
  4. Evaluate and apply a supported carefully scoped damping policy only where warranted.

Explanation

Correct Answer

C:

For a managed network team troubleshooting an internet edge, the direct corrective action is: Enable advertise-inactive only for the intentional peer context and test its effect. This addresses the mechanism: Junos normally exports active routes; supported advertise-inactive can announce an eligible inactive BGP route in some cases. Confirm by checking: The neighbor receives the required BGP route despite a competing active non-BGP route. During rollout, check forwarding-loop risks if the advertiser does not actually forward by the advertised path.

Incorrect Answers

A:

AS-path prepending lengthens a path in selected outbound advertisements and may influence upstream BGP selection. The appropriate correction for the reported case is: Enable advertise-inactive only for the intentional peer context and test its effect.

B:

Junos route filters distinguish exact matching from longer or longer-prefix patterns. Fixing that different mechanism would not address the current root cause: junos normally exports active routes; supported advertise-inactive can announce an eligible inactive BGP route in some cases.

D:

Route-flap damping can suppress repeatedly changing paths according to configured penalties and reuse rules. Its verification is distinct from the reported condition: A valid BGP path is present but a more preferred static route prevents that BGP path from being advertised. The diagnosis must distinguish a healthy BGP session from eligible received routes.

Question 180

At a campus distributing IP video to several buildings, a Junos specialist investigates this scenario: A router with a healthy PIM uplink cannot discover which attached IPv4 LAN users want a multicast group. The group traffic must reach interested receivers without flooding other locations. What is the most likely design-related cause?

  1. PIM Join and Prune signaling maintains or removes forwarding-tree state as downstream interest changes.
  2. IGMP membership maintenance relies on periodic queries from a suitable multicast querier.
  3. Multicast group and routing policies can limit which group ranges and sources cross specified boundaries.
  4. IGMP membership reports convey IPv4 receiver interest from hosts to their local multicast router.

Explanation

Correct Answer

D:

For a campus distributing IP video to several buildings, the governing mechanism is: IGMP membership reports convey IPv4 receiver interest from hosts to their local multicast router. It explains the reported symptom: A router with a healthy PIM uplink cannot discover which attached IPv4 LAN users want a multicast group. The intended response is: Enable appropriate IGMP processing on the receiver VLAN and validate group membership reports. Verification: show igmp group lists the expected joined group and its receiving interface.

Incorrect Answers

A:

PIM Join and Prune signaling maintains or removes forwarding-tree state as downstream interest changes. This alternative mechanism does not match the current fault.

B:

IGMP membership maintenance relies on periodic queries from a suitable multicast querier. Fixing that different mechanism would not address the current root cause: IGMP membership reports convey IPv4 receiver interest from hosts to their local multicast router.

C:

Multicast group and routing policies can limit which group ranges and sources cross specified boundaries. Its verification is distinct from the reported condition: A router with a healthy PIM uplink cannot discover which attached IPv4 LAN users want a multicast group. The group traffic must reach interested receivers without flooding other locations.

Enterprise Routing and Switching, Professional (JNCIP-ENT) (JN0-650) Practice Tests