mcAfee Secure Website
exam =5
exam =6

Exam Code: JN0-650

Exam Name: Enterprise Routing and Switching, Professional (JNCIP-ENT)

Certification Provider: Juniper

Corresponding Certification: JNCIP-ENT

Juniper JN0-650 Questions & Answers

Reliable & Actual Study Materials for JN0-650 Exam Success

107 Questions & Answers with Testing Engine

"JN0-650: Enterprise Routing and Switching, Professional (JNCIP-ENT)" Testing Engine covers all the knowledge points of the real Juniper JN0-650 exam.

The latest actual JN0-650 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at JN0-650 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Juniper Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Juniper JN0-650 Practice Test 19

Question 180

At a campus distributing IP video to several buildings, a Junos specialist investigates this scenario: A router with a healthy PIM uplink cannot discover which attached IPv4 LAN users want a multicast group. The group traffic must reach interested receivers without flooding other locations. What is the most likely design-related cause?

  1. PIM Join and Prune signaling maintains or removes forwarding-tree state as downstream interest changes.
  2. IGMP membership maintenance relies on periodic queries from a suitable multicast querier.
  3. Multicast group and routing policies can limit which group ranges and sources cross specified boundaries.
  4. IGMP membership reports convey IPv4 receiver interest from hosts to their local multicast router.

Explanation

Correct Answer

D:

For a campus distributing IP video to several buildings, the governing mechanism is: IGMP membership reports convey IPv4 receiver interest from hosts to their local multicast router. It explains the reported symptom: A router with a healthy PIM uplink cannot discover which attached IPv4 LAN users want a multicast group. The intended response is: Enable appropriate IGMP processing on the receiver VLAN and validate group membership reports. Verification: show igmp group lists the expected joined group and its receiving interface.

Incorrect Answers

A:

PIM Join and Prune signaling maintains or removes forwarding-tree state as downstream interest changes. This alternative mechanism does not match the current fault.

B:

IGMP membership maintenance relies on periodic queries from a suitable multicast querier. Fixing that different mechanism would not address the current root cause: IGMP membership reports convey IPv4 receiver interest from hosts to their local multicast router.

C:

Multicast group and routing policies can limit which group ranges and sources cross specified boundaries. Its verification is distinct from the reported condition: A router with a healthy PIM uplink cannot discover which attached IPv4 LAN users want a multicast group. The group traffic must reach interested receivers without flooding other locations.

Question 181

At a healthcare organization connecting redundant facilities, a Junos specialist investigates this scenario: A critical OSPF adjacency takes too long to detect loss when the physical interface stays electrically up. The correction must not expose administrative network prefixes. Which configuration adjustment should be made first to address this issue?

  1. Enable compatible BFD sessions for the approved OSPF neighbors and test failure detection.
  2. Match the intended IPv6 static route in a scoped export policy under the OSPFv3 process.
  3. Enable OSPF on the intended logical interface under the appropriate area and confirm its interface parameters.
  4. Read network type and DR/BDR election results when interpreting show ospf neighbor.

Explanation

Correct Answer

A:

For a healthcare organization connecting redundant facilities, the direct corrective action is: Enable compatible BFD sessions for the approved OSPF neighbors and test failure detection. This addresses the mechanism: Bidirectional Forwarding Detection can provide rapid independent liveliness detection for supported routing peers. Confirm by checking: An injected forwarding failure brings down the affected neighbor within the planned interval. During rollout, ensure timer settings and platform CPU capacity tolerate the requested BFD frequency.

Incorrect Answers

B:

Junos requires a suitable route export policy to originate eligible non-OSPFv3 routes. The appropriate correction for the reported case is: Enable compatible BFD sessions for the approved OSPF neighbors and test failure detection.

C:

OSPF neighbor discovery requires the relevant logical interface to participate in the correct routing instance and area. Fixing that different mechanism would not address the current root cause: Bidirectional Forwarding Detection can provide rapid independent liveliness detection for supported routing peers.

D:

OSPF neighbor states depend on interface topology and DR roles; not every TwoWay relation becomes Full. Its verification is distinct from the reported condition: A critical OSPF adjacency takes too long to detect loss when the physical interface stays electrically up. The correction must not expose administrative network prefixes.

Question 182

At an enterprise core exchanging BGP routes over redundant WAN paths, a Junos specialist investigates this scenario: A transit neighbor sends several unwanted networks and the receiving Junos router must accept only approved prefixes. The chosen route must have a valid data-plane next hop. What would demonstrate a successful correction under test?

  1. The revised advertisement no longer contains an invalid local-AS loop and becomes eligible.
  2. Accepted routes appear in the BGP route table and unwanted routes are rejected or hidden as intended.
  3. Reflector clients receive BGP routes from other clients through the reflector.
  4. The peer receives only the approved announcements and no internal management subnets.

Explanation

Correct Answer

B:

For an enterprise core exchanging BGP routes over redundant WAN paths, the decisive evidence is: Accepted routes appear in the BGP route table and unwanted routes are rejected or hidden as intended. This validates the action: Attach a scoped import policy matching authorized prefixes and explicitly rejecting prohibited ones. Because: A BGP import policy determines which incoming route advertisements are accepted into the routing table. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

A:

BGP AS-path loop detection normally prevents accepting routes already traversing the local autonomous system. The appropriate correction for the reported case is: Attach a scoped import policy matching authorized prefixes and explicitly rejecting prohibited ones.

C:

Ordinary iBGP split-horizon rules avoid re-advertising routes between iBGP peers; route reflectors provide controlled reflection. Fixing that different mechanism would not address the current root cause: a BGP import policy determines which incoming route advertisements are accepted into the routing table.

D:

BGP export policy controls which eligible active routes the speaker announces to selected neighbors. Its verification is distinct from the reported condition: A transit neighbor sends several unwanted networks and the receiving Junos router must accept only approved prefixes. The chosen route must have a valid data-plane next hop.

Question 183

At an enterprise core exchanging BGP routes over redundant WAN paths, a Junos specialist investigates this scenario: A broad policy accept term precedes a specific reject term and restricted prefixes are still announced. The chosen route must have a valid data-plane next hop. What requirement most specifically calls for this approach?

  1. Use BGP import policy to control external route acceptance.
  2. Use BGP ORIGIN as a later best-path tiebreaker among otherwise comparable paths.
  3. Use ordered Junos policy terms to make specific route exceptions effective.
  4. Use selective damping when repeated instability warrants controlled suppression.

Explanation

Correct Answer

C:

For an enterprise core exchanging BGP routes over redundant WAN paths, this mechanism fits the requirement: Use ordered Junos policy terms to make specific route exceptions effective. The design is appropriate because: Junos policy terms are evaluated in configured order and a terminating action can end processing early. In this scenario, the observed issue is: A broad policy accept term precedes a specific reject term and restricted prefixes are still announced. The corresponding implementation is: Place specific prefix rejection before a broader permitted match in the relevant policy.

Incorrect Answers

A:

A BGP import policy determines which incoming route advertisements are accepted into the routing table. The appropriate correction for the reported case is: Place specific prefix rejection before a broader permitted match in the relevant policy.

B:

BGP best-path selection considers origin type after higher-priority attributes, normally preferring IGP over EGP over incomplete. Fixing that different mechanism would not address the current root cause: junos policy terms are evaluated in configured order and a terminating action can end processing early.

D:

Route-flap damping can suppress repeatedly changing paths according to configured penalties and reuse rules. Its verification is distinct from the reported condition: A broad policy accept term precedes a specific reject term and restricted prefixes are still announced. The chosen route must have a valid data-plane next hop.

Question 184

At a branch router serving several application classes, a Junos specialist investigates this scenario: A trunk receives correctly PCP-tagged Ethernet frames but their Layer 2 priority is ignored at the receiving switch. The team must validate packet drops by actual queue statistics. When would the described mechanism be appropriate?

  1. Use BA DSCP classification when trustworthy upstream packet markings exist.
  2. Use hierarchical CoS where a shaped WAN rate must be divided among traffic classes.
  3. Use CoS rewrite rules to present correct markings to downstream networks.
  4. Use 802.1p classification on trusted VLAN-tagged Ethernet traffic.

Explanation

Correct Answer

D:

For a branch router serving several application classes, this mechanism fits the requirement: Use 802.1p classification on trusted VLAN-tagged Ethernet traffic. The design is appropriate because: IEEE 802.1p priority values in tagged Ethernet frames can drive behavior aggregate Layer 2 CoS classification. In this scenario, the observed issue is: A trunk receives correctly PCP-tagged Ethernet frames but their Layer 2 priority is ignored at the receiving switch. The corresponding implementation is: Apply an appropriate IEEE 802.1p classifier on the trusted tagged ingress port.

Incorrect Answers

A:

A behavior aggregate classifier maps incoming codepoint values to local forwarding class and loss priority. The appropriate correction for the reported case is: Apply an appropriate IEEE 802.1p classifier on the trusted tagged ingress port.

B:

Hierarchical CoS policies coordinate parent traffic shaping with child class queues or scheduler allocation where supported. Fixing that different mechanism would not address the current root cause: IEEE 802.1p priority values in tagged Ethernet frames can drive behavior aggregate Layer 2 CoS classification.

C:

Junos rewrite rules map internal forwarding class and loss-priority information to outgoing packet codepoints. Its verification is distinct from the reported condition: A trunk receives correctly PCP-tagged Ethernet frames but their Layer 2 priority is ignored at the receiving switch. The team must validate packet drops by actual queue statistics. When would the described mechanism be appropriate.

Question 185

At a healthcare organization connecting redundant facilities, a Junos specialist investigates this scenario: A route is visible locally but network engineers confuse accepting it into a RIB with advertising it as a new OSPF external LSA. The correction must not expose administrative network prefixes. Which operational change most directly resolves the observed failure?

  1. Apply the policy at the hierarchy appropriate to redistribution rather than assuming import creates advertisements.
  2. Choose the intended external metric type for the redistributed prefix and validate path selection.
  3. Match the intended IPv6 static route in a scoped export policy under the OSPFv3 process.
  4. Export only the authorized default route and confirm its next-hop and forwarding path.

Explanation

Correct Answer

A:

For a healthcare organization connecting redundant facilities, the direct corrective action is: Apply the policy at the hierarchy appropriate to redistribution rather than assuming import creates advertisements. This addresses the mechanism: Junos OSPF export governs eligible external route origination while import filtering has different route-selection effects. Confirm by checking: The intended external LSA appears only after the correct export policy is active. During rollout, check policy direction and default behavior before applying a broad accept term.

Incorrect Answers

B:

Type-1 external OSPF cost includes internal cost to the ASBR while type-2 primarily uses the external metric for selection. The appropriate correction for the reported case is: Apply the policy at the hierarchy appropriate to redistribution rather than assuming import creates advertisements.

C:

Junos requires a suitable route export policy to originate eligible non-OSPFv3 routes. Fixing that different mechanism would not address the current root cause: junos OSPF export governs eligible external route origination while import filtering has different route-selection effects.

D:

A scoped OSPF default-route export can advertise 0.0.0.0/0 when the default is valid. Its verification is distinct from the reported condition: A route is visible locally but network engineers confuse accepting it into a RIB with advertising it as a new OSPF external LSA. The correction must not expose administrative network prefixes.

Question 186

At a campus distributing IP video to several buildings, a Junos specialist investigates this scenario: An ASM receiver joins G but routers disagree about the RP responsible for the group. The group traffic must reach interested receivers without flooding other locations. What important rollout safeguard is most relevant here?

  1. Consider unwanted sources and multicast boundary controls in an open ASM group.
  2. Do not move the RP without validating reachable unicast routing to its address.
  3. Avoid running competing unsupported querier configurations without election planning.
  4. Correlate RPF and PIM state before making indiscriminate VLAN flooding changes.

Explanation

Correct Answer

B:

For a campus distributing IP video to several buildings, the relevant safeguard is: Do not move the RP without validating reachable unicast routing to its address. It matters while implementing: Configure or correct the intended RP mapping for the affected group range throughout the domain. The fault involves: PIM-SM shared-tree construction depends on consistent mappings of multicast groups to suitable RPs. The required acceptance result remains: show pim rps reports the planned RP and receivers join the corresponding tree.

Incorrect Answers

A:

Any-source multicast allows receivers to request a group independent of a specific source, typically using a shared-tree mechanism. The appropriate correction for the reported case is: Do not move the RP without validating reachable unicast routing to its address.

C:

IGMP membership maintenance relies on periodic queries from a suitable multicast querier. Fixing that different mechanism would not address the current root cause: PIM-SM shared-tree construction depends on consistent mappings of multicast groups to suitable RPs.

D:

Multicast forwarding depends on per-group and per-source route state in addition to host membership. Its verification is distinct from the reported condition: An ASM receiver joins G but routers disagree about the RP responsible for the group. The group traffic must reach interested receivers without flooding other locations.

Question 187

At a congested enterprise WAN carrying video, voice and backups, a Junos specialist investigates this scenario: A forwarding class is classified correctly but receives too little bandwidth on a congested interface. The network must keep critical application latency within policy. Which technical mechanism most directly explains the symptom?

  1. Junos Class of Service uses forwarding classes to group packets for selected queuing and scheduling behavior.
  2. A scheduler map must be associated with the appropriate interface for selected class-to-scheduler behavior.
  3. Junos schedulers control bandwidth allocation among queues using configured transmission rates and priorities.
  4. A scheduler can prioritize selected latency-sensitive queues over other queues when the interface is congested.

Explanation

Correct Answer

C:

For a congested enterprise WAN carrying video, voice and backups, the governing mechanism is: Junos schedulers control bandwidth allocation among queues using configured transmission rates and priorities. It explains the reported symptom: A forwarding class is classified correctly but receives too little bandwidth on a congested interface. The intended response is: Assign appropriate scheduler transmit-rate settings for the required class and validate link capacity. Verification: Queue counters show the intended class receives its planned share during a controlled load.

Incorrect Answers

A:

Junos Class of Service uses forwarding classes to group packets for selected queuing and scheduling behavior. This alternative mechanism does not match the current fault.

B:

A scheduler map must be associated with the appropriate interface for selected class-to-scheduler behavior. Fixing that different mechanism would not address the current root cause: junos schedulers control bandwidth allocation among queues using configured transmission rates and priorities.

D:

A scheduler can prioritize selected latency-sensitive queues over other queues when the interface is congested. Its verification is distinct from the reported condition: A forwarding class is classified correctly but receives too little bandwidth on a congested interface. The network must keep critical application latency within policy.

Question 188

At a data-center access fabric using tagged trunks, a Junos specialist investigates this scenario: A desktop plugged into an EX switch receives traffic from an unexpected user VLAN. The proposed behavior must be validated on actual switching ports. What verification result should the engineer expect?

  1. Matching test traffic enters the designated VLAN while nonmatching traffic follows default handling.
  2. A test superior BPDU is blocked and the authorized root stays unchanged.
  3. A controlled received-BPDU test produces the expected protective state and alert.
  4. show ethernet-switching interfaces displays the assigned VLAN and test hosts reach only its subnet.

Explanation

Correct Answer

D:

For a data-center access fabric using tagged trunks, the decisive evidence is: show ethernet-switching interfaces displays the assigned VLAN and test hosts reach only its subnet. This validates the action: Set the intended VLAN membership on the access logical interface and verify the port mode. Because: An untagged Ethernet access port places endpoint traffic into its configured access VLAN. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

A:

Filter-based VLANs can classify ingress frames and assign eligible traffic to a selected VLAN. The appropriate correction for the reported case is: Set the intended VLAN membership on the access logical interface and verify the port mode.

B:

Root protection can prevent a specified port from accepting an unexpected superior root advertisement. Fixing that different mechanism would not address the current root cause: an untagged Ethernet access port places endpoint traffic into its configured access VLAN.

C:

BPDU protection can prevent an edge interface from accepting unauthorized bridge control messages. Its verification is distinct from the reported condition: A desktop plugged into an EX switch receives traffic from an unexpected user VLAN. The proposed behavior must be validated on actual switching ports.

Question 189

At an enterprise telemetry network with multicast subscribers, a Junos specialist investigates this scenario: The operations team sees (S,G) entries and assumes they mean every source may send to a joined group. The team should test joins and forwarding separately. Which limitation should guide the change control?

  1. Do not interpret (*,G) shared-tree membership as proof that a particular source is forwarding.
  2. Correlate RPF and PIM state before making indiscriminate VLAN flooding changes.
  3. Validate host and switch feature support before relying on source filtering.
  4. Avoid using reserved link-local multicast groups for arbitrary enterprise streams.

Explanation

Correct Answer

A:

For an enterprise telemetry network with multicast subscribers, the relevant safeguard is: Do not interpret (*,G) shared-tree membership as proof that a particular source is forwarding. It matters while implementing: Inspect the source and group state to diagnose the correct sender-specific distribution tree. The fault involves: (S,G) multicast state identifies one particular source S and destination group G. The required acceptance result remains: show multicast route or PIM state contains the planned source-group combination.

Incorrect Answers

B:

Multicast forwarding depends on per-group and per-source route state in addition to host membership. The appropriate correction for the reported case is: Do not interpret (*,G) shared-tree membership as proof that a particular source is forwarding.

C:

IGMPv3 membership records can identify source filters that enable explicit SSM interest. Fixing that different mechanism would not address the current root cause: (S,G) multicast state identifies one particular source S and destination group G.

D:

IPv4 multicast traffic uses group addresses from 224.0.0.0 through 239.255.255.255 rather than ordinary unicast host destinations. Its verification is distinct from the reported condition: The operations team sees (S,G) entries and assumes they mean every source may send to a joined group. The team should test joins and forwarding separately.

Question 190

At a branch introducing an IP telephony access layer, a Junos specialist investigates this scenario: A technician plugs a phone into the wrong switch port and cannot identify its actual neighbor from cabling records. The solution should not give workstation traffic untrusted voice privileges. What risk must the implementation avoid?

  1. Do not exceed chassis supply or line-card power availability based only on per-port ratings.
  2. Do not expose sensitive topology details on untrusted external facing interfaces without policy.
  3. Confirm phone model and manufacturer support instead of assuming all endpoints interpret MED TLVs.
  4. Verify 802.1X and MAC RADIUS behavior separately for phone and PC identities.

Explanation

Correct Answer

B:

For a branch introducing an IP telephony access layer, the relevant safeguard is: Do not expose sensitive topology details on untrusted external facing interfaces without policy. It matters while implementing: Enable supported LLDP on authorized interfaces and inspect neighbor information. The fault involves: Link Layer Discovery Protocol advertises local chassis and port information to directly attached compatible devices. The required acceptance result remains: show lldp neighbors identifies the intended adjacent device and receiving port.

Incorrect Answers

A:

PoE availability depends on available switch power budget and each attached device's negotiated consumption. The appropriate correction for the reported case is: Do not expose sensitive topology details on untrusted external facing interfaces without policy.

C:

LLDP-MED network policy information can advertise voice VLAN and QoS settings to compatible phones. Fixing that different mechanism would not address the current root cause: Link Layer Discovery Protocol advertises local chassis and port information to directly attached compatible devices.

D:

An Ethernet phone can bridge tagged voice traffic and untagged workstation traffic with appropriate VLAN behavior. Its verification is distinct from the reported condition: A technician plugs a phone into the wrong switch port and cannot identify its actual neighbor from cabling records. The solution should not give workstation traffic untrusted voice privileges.

Enterprise Routing and Switching, Professional (JNCIP-ENT) (JN0-650) Practice Tests