mcAfee Secure Website
exam =5
exam =6

Exam Code: 4A0-D01

Exam Name: Nokia Data Center Fabric Fundamentals

Certification Provider: Nokia

Nokia 4A0-D01 Questions & Answers

Reliable & Actual Study Materials for 4A0-D01 Exam Success

61 Questions & Answers with Testing Engine

"4A0-D01: Nokia Data Center Fabric Fundamentals" Testing Engine covers all the knowledge points of the real Nokia 4A0-D01 exam.

The latest actual 4A0-D01 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at 4A0-D01 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Nokia Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Nokia 4A0-D01 Practice Test 62

Question 610

In the fictional Harbor-1 east pod, a staged top-of-rack rollout with a bounded maintenance window, the team reports that a two-tier Clos fabric needs resilient leaf-to-spine paths. A peer suggested: "Place all east-west traffic through one gateway firewall" That did not solve the constraint. What should be chosen instead?

  1. Place all east-west traffic through one gateway firewall.
  2. Connect every leaf to each spine in the same fabric.
  3. Use a single large Layer 2 ring as the sole interconnect.
  4. Connect each leaf only to its nearest leaf.

Explanation

Correct Answer

B:

Multiple spine paths avoid a single aggregation dependency and permit ECMP. For Harbor-1, confirm the actual outcome: each leaf has live routed adjacencies to the intended spines.

Incorrect Answers

A:

“Place all east-west traffic through one gateway firewall” targets a different operation from the reported requirement: “a two-tier Clos fabric needs resilient leaf-to-spine paths”. Multiple spine paths avoid a single aggregation dependency and permit ECMP. Use the appropriate method: Connect every leaf to each spine in the same fabric.

C:

“Use a single large Layer 2 ring as the sole interconnect” targets a different operation from the reported requirement: “a two-tier Clos fabric needs resilient leaf-to-spine paths”. Multiple spine paths avoid a single aggregation dependency and permit ECMP. Use the appropriate method: Connect every leaf to each spine in the same fabric.

D:

“Connect each leaf only to its nearest leaf” targets a different operation from the reported requirement: “a two-tier Clos fabric needs resilient leaf-to-spine paths”. Multiple spine paths avoid a single aggregation dependency and permit ECMP. Use the appropriate method: Connect every leaf to each spine in the same fabric.

Question 611

In the fictional North-10 west pod, a commissioning exercise under the on-call team, the team reports that a remote tenant host moves to another leaf and reachability must be updated. A peer suggested: "Use Type 5 IP-prefix routes as the only source of individual MAC location" That did not solve the constraint. What should be chosen instead?

  1. Treat the physical port description as a BGP EVPN update.
  2. Use Type 5 IP-prefix routes as the only source of individual MAC location.
  3. Examine BGP EVPN Type 2 MAC/IP reachability advertisements.
  4. Use system ACL counters to advertise host movement.

Explanation

Correct Answer

C:

EVPN MAC/IP advertisements carry endpoint reachability information for the L2 overlay. The option uses “Examine BGP EVPN Type 2 MAC/IP reachability advertisements” to address “a remote tenant host moves to another leaf and reachability must be updated”. The result must be observed on the affected component. Before onboarding, test that the intended fabric state exists.

Incorrect Answers

A:

“Treat the physical port description as a BGP EVPN update” targets a different operation from the reported requirement: “a remote tenant host moves to another leaf and reachability must be updated”. EVPN MAC/IP advertisements carry endpoint reachability information for the L2 overlay. Use the appropriate method: Examine BGP EVPN Type 2 MAC/IP reachability advertisements. Before onboarding, test that the intended fabric state exists.

B:

“Use Type 5 IP-prefix routes as the only source of individual MAC location” targets a different operation from the reported requirement: “a remote tenant host moves to another leaf and reachability must be updated”. EVPN MAC/IP advertisements carry endpoint reachability information for the L2 overlay. Use the appropriate method: Examine BGP EVPN Type 2 MAC/IP reachability advertisements. Before onboarding, test that the intended fabric state exists.

D:

“Use system ACL counters to advertise host movement” targets a different operation from the reported requirement: “a remote tenant host moves to another leaf and reachability must be updated”. EVPN MAC/IP advertisements carry endpoint reachability information for the L2 overlay. Use the appropriate method: Examine BGP EVPN Type 2 MAC/IP reachability advertisements. Before onboarding, test that the intended fabric state exists.

Question 612

In the fictional Canyon-5 east pod, a fabric operations audit prior to tenant onboarding, the team reports that the overlay needs to advertise IP routing reachability beyond individual MAC entries. A peer suggested: "Treat an interface ACL entry as an EVPN IP route" That did not solve the constraint. What should be chosen instead?

  1. Assign a MAC-VRF bridge flood-list in place of an L3 prefix advertisement.
  2. Treat an interface ACL entry as an EVPN IP route.
  3. Use only Type 3 membership routes to represent all routed prefixes.
  4. Use appropriate EVPN Type 5 IP prefix advertisements.

Explanation

Correct Answer

D:

IP prefix routes advertise Layer 3 destination reachability within EVPN. For Canyon-5, confirm the actual outcome: the intended tenant prefix is imported into the right IP-VRF.

Incorrect Answers

A:

“Assign a MAC-VRF bridge flood-list in place of an L3 prefix advertisement” targets a different operation from the reported requirement: “the overlay needs to advertise IP routing reachability beyond individual MAC entries”. IP prefix routes advertise Layer 3 destination reachability within EVPN. Use the appropriate method: Use appropriate EVPN Type 5 IP prefix advertisements. Before onboarding, test that the intended fabric state exists.

B:

“Treat an interface ACL entry as an EVPN IP route” targets a different operation from the reported requirement: “the overlay needs to advertise IP routing reachability beyond individual MAC entries”. IP prefix routes advertise Layer 3 destination reachability within EVPN. Use the appropriate method: Use appropriate EVPN Type 5 IP prefix advertisements. Before onboarding, test that the intended fabric state exists.

C:

“Use only Type 3 membership routes to represent all routed prefixes” targets a different operation from the reported requirement: “the overlay needs to advertise IP routing reachability beyond individual MAC entries”. IP prefix routes advertise Layer 3 destination reachability within EVPN. Use the appropriate method: Use appropriate EVPN Type 5 IP prefix advertisements. Before onboarding, test that the intended fabric state exists.

Question 613

In the fictional Canyon-5 west pod, a fabric operations audit prior to tenant onboarding, the team reports that management access to the switch itself must be restricted. A peer suggested: "Use only a tenant interface ACL and assume it protects all device management" That did not solve the constraint. What should be chosen instead?

  1. Use the applicable system ACL or management-access policy for device-bound traffic.
  2. Use only a tenant interface ACL and assume it protects all device management.
  3. Disable tenant EVPN routes to secure the management endpoint.
  4. Change a VXLAN VNI as an SSH authentication filter.

Explanation

Correct Answer

A:

System-level access filtering concerns traffic destined to the device, not just transit services. The option uses “Use the applicable system ACL or management-access policy for device-bound traffic” to address “management access to the switch itself must be restricted”. The result must be observed on the affected component. Before onboarding, test that the intended fabric state exists.

Incorrect Answers

B:

“Use only a tenant interface ACL and assume it protects all device management” targets a different operation from the reported requirement: “management access to the switch itself must be restricted”. System-level access filtering concerns traffic destined to the device, not just transit services. Use the appropriate method: Use the applicable system ACL or management-access policy for device-bound traffic. Before onboarding, test that the intended fabric state exists.

C:

“Disable tenant EVPN routes to secure the management endpoint” targets a different operation from the reported requirement: “management access to the switch itself must be restricted”. System-level access filtering concerns traffic destined to the device, not just transit services. Use the appropriate method: Use the applicable system ACL or management-access policy for device-bound traffic. Before onboarding, test that the intended fabric state exists.

D:

“Change a VXLAN VNI as an SSH authentication filter” targets a different operation from the reported requirement: “management access to the switch itself must be restricted”. System-level access filtering concerns traffic destined to the device, not just transit services. Use the appropriate method: Use the applicable system ACL or management-access policy for device-bound traffic. Before onboarding, test that the intended fabric state exists.

Question 614

In the fictional Orchard-3 east pod, a lab-to-production migration after a successful canary, the team reports that automation must distinguish configured interface intent from observed link health. Which engineering action best satisfies this request?

  1. Treat desired admin state as proof of operational signal.
  2. Read the appropriate modeled configuration and state objects separately.
  3. Use an EVPN route target as the source of optics health.
  4. Rely on VLAN names as physical transceiver measurements.

Explanation

Correct Answer

B:

A configured value and an operationally measured value answer different questions. Check: the model shows both intended admin setting and actual operational status.

Incorrect Answers

A:

“Treat desired admin state as proof of operational signal” targets a different operation from the reported requirement: “automation must distinguish configured interface intent from observed link health”. A configured value and an operationally measured value answer different questions. The confirming result is: the model shows both intended admin setting and actual operational status. For the staged migration, validate the affected path before expansion.

C:

“Use an EVPN route target as the source of optics health” targets a different operation from the reported requirement: “automation must distinguish configured interface intent from observed link health”. A configured value and an operationally measured value answer different questions. The confirming result is: the model shows both intended admin setting and actual operational status. For the staged migration, validate the affected path before expansion.

D:

“Rely on VLAN names as physical transceiver measurements” targets a different operation from the reported requirement: “automation must distinguish configured interface intent from observed link health”. A configured value and an operationally measured value answer different questions. The confirming result is: the model shows both intended admin setting and actual operational status. For the staged migration, validate the affected path before expansion.

Question 615

In the fictional Delta-6 east pod, a controller-managed extension requiring reproducible evidence, the team reports that a link carries packets but the application sees intermittent errors. An unrelated configuration change is being considered. Which focused remediation best addresses the described problem first?

  1. Change the route distinguisher to reset physical CRC errors.
  2. Assume a green GUI icon proves no packet impairment.
  3. Inspect error, discard and packet counters for that interface.
  4. Check only the switch hostname to judge packet loss.

Explanation

Correct Answer

C:

Counters help distinguish physical or forwarding problems from configuration guesses. For Delta-6, confirm the actual outcome: error and discard trends align with measured traffic and reported symptoms.

Incorrect Answers

A:

“Change the route distinguisher to reset physical CRC errors” targets a different operation from the reported requirement: “a link carries packets but the application sees intermittent errors”. Counters help distinguish physical or forwarding problems from configuration guesses. Use the appropriate method: Inspect error, discard and packet counters for that interface.

B:

“Assume a green GUI icon proves no packet impairment” targets a different operation from the reported requirement: “a link carries packets but the application sees intermittent errors”. Counters help distinguish physical or forwarding problems from configuration guesses. Use the appropriate method: Inspect error, discard and packet counters for that interface.

D:

“Check only the switch hostname to judge packet loss” targets a different operation from the reported requirement: “a link carries packets but the application sees intermittent errors”. Counters help distinguish physical or forwarding problems from configuration guesses. Use the appropriate method: Inspect error, discard and packet counters for that interface.

Question 616

In the fictional Pine-9 west pod, a replacement leaf with configuration review requirements, the team reports that operations need repeatable tenant service deployment across the fabric. A peer suggested: "Change one access VLAN manually without representing service dependencies" That did not solve the constraint. What should be chosen instead?

  1. Use syslog text as the only authoritative tenant service configuration.
  2. Change one access VLAN manually without representing service dependencies.
  3. Turn off remote EVPN route exchange and declare the service deployed.
  4. Use EDA service-intent definitions with controlled reconciliation.

Explanation

Correct Answer

D:

Service intent captures desired network service state across participating resources. The option uses “Use EDA service-intent definitions with controlled reconciliation” to address “operations need repeatable tenant service deployment across the fabric”. The result must be observed on the affected component. Confirm that the replacement leaf reaches the expected operational state.

Incorrect Answers

A:

“Use syslog text as the only authoritative tenant service configuration” targets a different operation from the reported requirement: “operations need repeatable tenant service deployment across the fabric”. Service intent captures desired network service state across participating resources. Use the appropriate method: Use EDA service-intent definitions with controlled reconciliation. Confirm that the replacement leaf reaches the expected operational state.

B:

“Change one access VLAN manually without representing service dependencies” targets a different operation from the reported requirement: “operations need repeatable tenant service deployment across the fabric”. Service intent captures desired network service state across participating resources. Use the appropriate method: Use EDA service-intent definitions with controlled reconciliation. Confirm that the replacement leaf reaches the expected operational state.

C:

“Turn off remote EVPN route exchange and declare the service deployed” targets a different operation from the reported requirement: “operations need repeatable tenant service deployment across the fabric”. Service intent captures desired network service state across participating resources. Use the appropriate method: Use EDA service-intent definitions with controlled reconciliation. Confirm that the replacement leaf reaches the expected operational state.

Question 617

In the fictional Harbor-1 east pod, a staged top-of-rack rollout with a bounded maintenance window, the team reports that a manually configured destination prefix has no usable forwarding adjacency. Which engineering action best satisfies this request?

  1. Reference an appropriate reachable next-hop group for the static route.
  2. Change the device hostname to match the prefix.
  3. Use a MAC move event as a static route next hop.
  4. Record the route only in syslog without installing it.

Explanation

Correct Answer

A:

A static route needs a viable forwarding disposition or next-hop resolution. For Harbor-1, confirm the actual outcome: the static prefix is installed with a valid resolved forwarding next hop.

Incorrect Answers

B:

“Change the device hostname to match the prefix” targets a different operation from the reported requirement: “a manually configured destination prefix has no usable forwarding adjacency”. A static route needs a viable forwarding disposition or next-hop resolution. Use the appropriate method: Reference an appropriate reachable next-hop group for the static route.

C:

“Use a MAC move event as a static route next hop” targets a different operation from the reported requirement: “a manually configured destination prefix has no usable forwarding adjacency”. A static route needs a viable forwarding disposition or next-hop resolution. Use the appropriate method: Reference an appropriate reachable next-hop group for the static route.

D:

“Record the route only in syslog without installing it” targets a different operation from the reported requirement: “a manually configured destination prefix has no usable forwarding adjacency”. A static route needs a viable forwarding disposition or next-hop resolution. Use the appropriate method: Reference an appropriate reachable next-hop group for the static route.

Question 618

In the fictional Ridge-2 east pod, a secondary data hall with tenant isolation requirements, the team reports that operators disagree whether a deployed interface ACL actually matches the failing flow. The planned change is "Inspect ACL hit counters and correlate them with test traffic." Which post-change observation best validates the intended technical behavior?

  1. Check only that the device hostname is listed in the inventory, without examining acl counters behavior.
  2. Verify that the expected ACL rule hit count changes under controlled test packets.
  3. Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior.
  4. Use an unrelated tenant dashboard as proof, without verifying the required acl counters condition.

Explanation

Correct Answer

B:

ACL entry counters can substantiate matching behavior when correlated with the flow. The option uses “Verify that the expected ACL rule hit count changes under controlled test packets” to address “operators disagree whether a deployed interface ACL actually matches the failing flow”. The acceptance test is: the expected ACL rule hit count changes under controlled test packets.

Incorrect Answers

A:

“Check only that the device hostname is listed in the inventory, without examining acl counters behavior” targets a different operation from the reported requirement: “operators disagree whether a deployed interface ACL actually matches the failing flow”. ACL entry counters can substantiate matching behavior when correlated with the flow. The confirming result is: the expected ACL rule hit count changes under controlled test packets.

C:

“Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior” targets a different operation from the reported requirement: “operators disagree whether a deployed interface ACL actually matches the failing flow”. ACL entry counters can substantiate matching behavior when correlated with the flow. The confirming result is: the expected ACL rule hit count changes under controlled test packets.

D:

“Use an unrelated tenant dashboard as proof, without verifying the required acl counters condition” targets a different operation from the reported requirement: “operators disagree whether a deployed interface ACL actually matches the failing flow”. ACL entry counters can substantiate matching behavior when correlated with the flow. The confirming result is: the expected ACL rule hit count changes under controlled test packets.

Question 619

In the fictional North-10 west pod, a commissioning exercise under the on-call team, the team reports that a change should be evaluated before it reaches the active device configuration. A peer suggested: "Assume a text editor changes active SR Linux state automatically" That did not solve the constraint. What should be chosen instead?

  1. Modify archived syslog entries instead of the candidate datastore.
  2. Use a packet capture as the configuration transaction.
  3. Make the edits in the candidate configuration workflow and review before commit.
  4. Assume a text editor changes active SR Linux state automatically.

Explanation

Correct Answer

C:

A candidate workflow separates proposed changes from committed running state. The option uses “Make the edits in the candidate configuration workflow and review before commit” to address “a change should be evaluated before it reaches the active device configuration”. The result must be observed on the affected component. Before onboarding, test that the intended fabric state exists.

Incorrect Answers

A:

“Modify archived syslog entries instead of the candidate datastore” targets a different operation from the reported requirement: “a change should be evaluated before it reaches the active device configuration”. A candidate workflow separates proposed changes from committed running state. Use the appropriate method: Make the edits in the candidate configuration workflow and review before commit. Before onboarding, test that the intended fabric state exists.

B:

“Use a packet capture as the configuration transaction” targets a different operation from the reported requirement: “a change should be evaluated before it reaches the active device configuration”. A candidate workflow separates proposed changes from committed running state. Use the appropriate method: Make the edits in the candidate configuration workflow and review before commit. Before onboarding, test that the intended fabric state exists.

D:

“Assume a text editor changes active SR Linux state automatically” targets a different operation from the reported requirement: “a change should be evaluated before it reaches the active device configuration”. A candidate workflow separates proposed changes from committed running state. Use the appropriate method: Make the edits in the candidate configuration workflow and review before commit. Before onboarding, test that the intended fabric state exists.

Question 620

In the fictional Atlas-7 east pod, a service recovery task following a partial path outage, the team reports that an underlay path needs rapid failure signaling between configured peers. A peer suggested: "Use EVPN route distinguishers as physical keepalive packets" That did not solve the constraint. What should be chosen instead?

  1. Turn off BGP neighbor transport to improve liveliness.
  2. Rely only on slow daily interface inventory exports.
  3. Use EVPN route distinguishers as physical keepalive packets.
  4. Configure and verify a supported BFD session for the relevant adjacency.

Explanation

Correct Answer

D:

BFD supplies protocol-independent rapid path liveliness detection when correctly bound to peers. For Atlas-7, confirm the actual outcome: the BFD session is up and its failure state correlates with the intended adjacency.

Incorrect Answers

A:

“Turn off BGP neighbor transport to improve liveliness” targets a different operation from the reported requirement: “an underlay path needs rapid failure signaling between configured peers”. BFD supplies protocol-independent rapid path liveliness detection when correctly bound to peers. Use the appropriate method: Configure and verify a supported BFD session for the relevant adjacency. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

B:

“Rely only on slow daily interface inventory exports” targets a different operation from the reported requirement: “an underlay path needs rapid failure signaling between configured peers”. BFD supplies protocol-independent rapid path liveliness detection when correctly bound to peers. Use the appropriate method: Configure and verify a supported BFD session for the relevant adjacency. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

C:

“Use EVPN route distinguishers as physical keepalive packets” targets a different operation from the reported requirement: “an underlay path needs rapid failure signaling between configured peers”. BFD supplies protocol-independent rapid path liveliness detection when correctly bound to peers. Use the appropriate method: Configure and verify a supported BFD session for the relevant adjacency. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

Nokia Data Center Fabric Fundamentals (4A0-D01) Practice Tests