mcAfee Secure Website
exam =5
exam =6

Exam Code: 4A0-D01

Exam Name: Nokia Data Center Fabric Fundamentals

Certification Provider: Nokia

Nokia 4A0-D01 Questions & Answers

Reliable & Actual Study Materials for 4A0-D01 Exam Success

61 Questions & Answers with Testing Engine

"4A0-D01: Nokia Data Center Fabric Fundamentals" Testing Engine covers all the knowledge points of the real Nokia 4A0-D01 exam.

The latest actual 4A0-D01 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at 4A0-D01 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Nokia Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Nokia 4A0-D01 Practice Test 60

Question 590

In the fictional Atlas-7 west pod, a service recovery task following a partial path outage, the team reports that an architecture review asks how EDA's controller platform is operated. A peer suggested: "Treat Kubernetes as the data-plane encapsulation for every packet" That did not solve the constraint. What should be chosen instead?

  1. Configure BFD as a container orchestration API.
  2. Describe EDA's Kubernetes-oriented orchestration architecture.
  3. Treat Kubernetes as the data-plane encapsulation for every packet.
  4. Assume the EDA control plane is identical to an Ethernet switch ASIC.

Explanation

Correct Answer

B:

EDA's platform orchestration concerns managed applications and controller components, not packet tunneling. The option uses “Describe EDA's Kubernetes-oriented orchestration architecture” to address “an architecture review asks how EDA's controller platform is operated”. The result must be observed on the affected component. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

Incorrect Answers

A:

“Configure BFD as a container orchestration API” targets a different operation from the reported requirement: “an architecture review asks how EDA's controller platform is operated”. EDA's platform orchestration concerns managed applications and controller components, not packet tunneling. Use the appropriate method: Describe EDA's Kubernetes-oriented orchestration architecture. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

C:

“Treat Kubernetes as the data-plane encapsulation for every packet” targets a different operation from the reported requirement: “an architecture review asks how EDA's controller platform is operated”. EDA's platform orchestration concerns managed applications and controller components, not packet tunneling. Use the appropriate method: Describe EDA's Kubernetes-oriented orchestration architecture. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

D:

“Assume the EDA control plane is identical to an Ethernet switch ASIC” targets a different operation from the reported requirement: “an architecture review asks how EDA's controller platform is operated”. EDA's platform orchestration concerns managed applications and controller components, not packet tunneling. Use the appropriate method: Describe EDA's Kubernetes-oriented orchestration architecture. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

Question 591

In the fictional Harbor-1 west pod, a staged top-of-rack rollout with a bounded maintenance window, the team reports that a remote overlay endpoint cannot be reached over the physical fabric. A peer suggested: "Recreate the tenant VLAN without checking IP reachability" That did not solve the constraint. What should be chosen instead?

  1. Recreate the tenant VLAN without checking IP reachability.
  2. Disable BGP EVPN to hide underlay route loss.
  3. Restore IP routing reachability to the remote VTEP address in the underlay.
  4. Change the application hostname while leaving the network unchanged.

Explanation

Correct Answer

C:

An overlay packet still needs an IP path to its outer tunnel destination. The option uses “Restore IP routing reachability to the remote VTEP address in the underlay” to address “a remote overlay endpoint cannot be reached over the physical fabric”. The result must be observed on the affected component.

Incorrect Answers

A:

“Recreate the tenant VLAN without checking IP reachability” targets a different operation from the reported requirement: “a remote overlay endpoint cannot be reached over the physical fabric”. An overlay packet still needs an IP path to its outer tunnel destination. Use the appropriate method: Restore IP routing reachability to the remote VTEP address in the underlay.

B:

“Disable BGP EVPN to hide underlay route loss” targets a different operation from the reported requirement: “a remote overlay endpoint cannot be reached over the physical fabric”. An overlay packet still needs an IP path to its outer tunnel destination. Use the appropriate method: Restore IP routing reachability to the remote VTEP address in the underlay.

D:

“Change the application hostname while leaving the network unchanged” targets a different operation from the reported requirement: “a remote overlay endpoint cannot be reached over the physical fabric”. An overlay packet still needs an IP path to its outer tunnel destination. Use the appropriate method: Restore IP routing reachability to the remote VTEP address in the underlay.

Question 592

In the fictional Canyon-5 west pod, a fabric operations audit prior to tenant onboarding, the team reports that a VXLAN endpoint sourced from a loopback address is unreachable. An unrelated configuration change is being considered. Which focused remediation best addresses the described problem first?

  1. Rename the loopback without updating any IP routes.
  2. Use a log severity filter as the reachability repair.
  3. Advertise only a tenant MAC and ignore underlay reachability.
  4. Ensure the loopback endpoint address is advertised and routed in the underlay.

Explanation

Correct Answer

D:

Loopback-based tunnel endpoints require routed transport reachability. For Canyon-5, confirm the actual outcome: the remote endpoint loopback resolves through valid underlay routes.

Incorrect Answers

A:

“Rename the loopback without updating any IP routes” targets a different operation from the reported requirement: “a VXLAN endpoint sourced from a loopback address is unreachable”. Loopback-based tunnel endpoints require routed transport reachability. Use the appropriate method: Ensure the loopback endpoint address is advertised and routed in the underlay. Before onboarding, test that the intended fabric state exists.

B:

“Use a log severity filter as the reachability repair” targets a different operation from the reported requirement: “a VXLAN endpoint sourced from a loopback address is unreachable”. Loopback-based tunnel endpoints require routed transport reachability. Use the appropriate method: Ensure the loopback endpoint address is advertised and routed in the underlay. Before onboarding, test that the intended fabric state exists.

C:

“Advertise only a tenant MAC and ignore underlay reachability” targets a different operation from the reported requirement: “a VXLAN endpoint sourced from a loopback address is unreachable”. Loopback-based tunnel endpoints require routed transport reachability. Use the appropriate method: Ensure the loopback endpoint address is advertised and routed in the underlay. Before onboarding, test that the intended fabric state exists.

Question 593

In the fictional Ridge-2 west pod, a secondary data hall with tenant isolation requirements, the team reports that two tenant Layer 2 segments need extension across a routed IP fabric. Which engineering action best satisfies this request?

  1. Use VXLAN encapsulation between reachable VTEPs.
  2. Make all physical spine links carry the tenant access VLAN.
  3. Route raw Ethernet frames as unencapsulated IP datagrams.
  4. Use BGP alone as the packet data tunnel.

Explanation

Correct Answer

A:

VXLAN carries tenant frames inside outer IP/UDP transport across the routed fabric. The option uses “Use VXLAN encapsulation between reachable VTEPs” to address “two tenant Layer 2 segments need extension across a routed IP fabric”. The result must be observed on the affected component.

Incorrect Answers

B:

“Make all physical spine links carry the tenant access VLAN” targets a different operation from the reported requirement: “two tenant Layer 2 segments need extension across a routed IP fabric”. VXLAN carries tenant frames inside outer IP/UDP transport across the routed fabric. Use the appropriate method: Use VXLAN encapsulation between reachable VTEPs.

C:

“Route raw Ethernet frames as unencapsulated IP datagrams” targets a different operation from the reported requirement: “two tenant Layer 2 segments need extension across a routed IP fabric”. VXLAN carries tenant frames inside outer IP/UDP transport across the routed fabric. Use the appropriate method: Use VXLAN encapsulation between reachable VTEPs.

D:

“Use BGP alone as the packet data tunnel” targets a different operation from the reported requirement: “two tenant Layer 2 segments need extension across a routed IP fabric”. VXLAN carries tenant frames inside outer IP/UDP transport across the routed fabric. Use the appropriate method: Use VXLAN encapsulation between reachable VTEPs.

Question 594

In the fictional Pine-9 west pod, a replacement leaf with configuration review requirements, the team reports that automation must distinguish configured interface intent from observed link health. The shift handoff must specify a defensible solution and the observable service outcome. Which recommendation is technically justified?

  1. Use an EVPN route target as the source of optics health.
  2. Read the appropriate modeled configuration and state objects separately.
  3. Treat desired admin state as proof of operational signal.
  4. Rely on VLAN names as physical transceiver measurements.

Explanation

Correct Answer

B:

A configured value and an operationally measured value answer different questions. For Pine-9, confirm the actual outcome: the model shows both intended admin setting and actual operational status.

Incorrect Answers

A:

“Use an EVPN route target as the source of optics health” targets a different operation from the reported requirement: “automation must distinguish configured interface intent from observed link health”. A configured value and an operationally measured value answer different questions. Use the appropriate method: Read the appropriate modeled configuration and state objects separately. Confirm that the replacement leaf reaches the expected operational state.

C:

“Treat desired admin state as proof of operational signal” targets a different operation from the reported requirement: “automation must distinguish configured interface intent from observed link health”. A configured value and an operationally measured value answer different questions. Use the appropriate method: Read the appropriate modeled configuration and state objects separately. Confirm that the replacement leaf reaches the expected operational state.

D:

“Rely on VLAN names as physical transceiver measurements” targets a different operation from the reported requirement: “automation must distinguish configured interface intent from observed link health”. A configured value and an operationally measured value answer different questions. Use the appropriate method: Read the appropriate modeled configuration and state objects separately. Confirm that the replacement leaf reaches the expected operational state.

Question 595

In the fictional Canyon-5 east pod, a fabric operations audit prior to tenant onboarding, the team reports that a risky change requires a reliable return point. The shift handoff must specify a defensible solution and the observable service outcome. Which recommendation is technically justified?

  1. Delete all prior configuration history before testing.
  2. Change random route preferences to force recovery.
  3. Take and retain a configuration checkpoint before applying the change.
  4. Rely on a single CLI screenshot as an automatic rollback.

Explanation

Correct Answer

C:

A checkpoint provides an explicit configuration reference for controlled rollback. For Canyon-5, confirm the actual outcome: the recorded checkpoint is available and maps to the intended prechange state.

Incorrect Answers

A:

“Delete all prior configuration history before testing” targets a different operation from the reported requirement: “a risky change requires a reliable return point”. A checkpoint provides an explicit configuration reference for controlled rollback. Use the appropriate method: Take and retain a configuration checkpoint before applying the change. Before onboarding, test that the intended fabric state exists.

B:

“Change random route preferences to force recovery” targets a different operation from the reported requirement: “a risky change requires a reliable return point”. A checkpoint provides an explicit configuration reference for controlled rollback. Use the appropriate method: Take and retain a configuration checkpoint before applying the change. Before onboarding, test that the intended fabric state exists.

D:

“Rely on a single CLI screenshot as an automatic rollback” targets a different operation from the reported requirement: “a risky change requires a reliable return point”. A checkpoint provides an explicit configuration reference for controlled rollback. Use the appropriate method: Take and retain a configuration checkpoint before applying the change. Before onboarding, test that the intended fabric state exists.

Question 596

In the fictional Delta-6 east pod, a controller-managed extension requiring reproducible evidence, the team reports that a policy must restrict selected transit traffic entering one tenant-facing interface. The planned change is "Apply an appropriate ingress interface ACL to that attachment." Which post-change observation best validates the intended technical behavior?

  1. Check only that the device hostname is listed in the inventory, without examining interface acl scope behavior.
  2. Use an unrelated tenant dashboard as proof, without verifying the required interface acl scope condition.
  3. Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior.
  4. Verify that matching transit flows are filtered while permitted flows continue.

Explanation

Correct Answer

D:

An interface ACL applies packet filtering to traffic on the scoped interface path. The option uses “Verify that matching transit flows are filtered while permitted flows continue” to address “a policy must restrict selected transit traffic entering one tenant-facing interface”. The acceptance test is: matching transit flows are filtered while permitted flows continue.

Incorrect Answers

A:

“Check only that the device hostname is listed in the inventory, without examining interface acl scope behavior” targets a different operation from the reported requirement: “a policy must restrict selected transit traffic entering one tenant-facing interface”. An interface ACL applies packet filtering to traffic on the scoped interface path. The confirming result is: matching transit flows are filtered while permitted flows continue.

B:

“Use an unrelated tenant dashboard as proof, without verifying the required interface acl scope condition” targets a different operation from the reported requirement: “a policy must restrict selected transit traffic entering one tenant-facing interface”. An interface ACL applies packet filtering to traffic on the scoped interface path. The confirming result is: matching transit flows are filtered while permitted flows continue.

C:

“Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior” targets a different operation from the reported requirement: “a policy must restrict selected transit traffic entering one tenant-facing interface”. An interface ACL applies packet filtering to traffic on the scoped interface path. The confirming result is: matching transit flows are filtered while permitted flows continue.

Question 597

In the fictional Orchard-3 east pod, a lab-to-production migration after a successful canary, the team reports that an operator needs live interface operational data rather than only intended settings. A peer suggested: "Replace the interface with a loopback to create an up indicator" That did not solve the constraint. What should be chosen instead?

  1. Inspect the operational state datastore or state-oriented CLI view.
  2. Check only user role names to determine physical link health.
  3. Replace the interface with a loopback to create an up indicator.
  4. Read only the saved configuration and assume it proves link status.

Explanation

Correct Answer

A:

Operational state exposes what the system reports now rather than merely requested configuration. The option uses “Inspect the operational state datastore or state-oriented CLI view” to address “an operator needs live interface operational data rather than only intended settings”. The acceptance test is: the relevant state paths show current link and counter values. For the staged migration, validate the affected path before expansion.

Incorrect Answers

B:

“Check only user role names to determine physical link health” targets a different operation from the reported requirement: “an operator needs live interface operational data rather than only intended settings”. Operational state exposes what the system reports now rather than merely requested configuration. The confirming result is: the relevant state paths show current link and counter values. For the staged migration, validate the affected path before expansion.

C:

“Replace the interface with a loopback to create an up indicator” targets a different operation from the reported requirement: “an operator needs live interface operational data rather than only intended settings”. Operational state exposes what the system reports now rather than merely requested configuration. The confirming result is: the relevant state paths show current link and counter values. For the staged migration, validate the affected path before expansion.

D:

“Read only the saved configuration and assume it proves link status” targets a different operation from the reported requirement: “an operator needs live interface operational data rather than only intended settings”. Operational state exposes what the system reports now rather than merely requested configuration. The confirming result is: the relevant state paths show current link and counter values. For the staged migration, validate the affected path before expansion.

Question 598

In the fictional Orchard-3 east pod, a lab-to-production migration after a successful canary, the team reports that a route is present but only one of several equal-cost paths is actually eligible. The planned change is "Inspect installed route and next-hop eligibility before changing link policy." Which post-change observation best validates the intended technical behavior?

  1. Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior.
  2. Verify that the route has the expected eligible next-hop set in forwarding state.
  3. Check only that the device hostname is listed in the inventory, without examining ecmp state analysis behavior.
  4. Use an unrelated tenant dashboard as proof, without verifying the required ecmp state analysis condition.

Explanation

Correct Answer

B:

Only installed eligible equal-cost next hops can participate in forwarding. The option uses “Verify that the route has the expected eligible next-hop set in forwarding state” to address “a route is present but only one of several equal-cost paths is actually eligible”. The acceptance test is: the route has the expected eligible next-hop set in forwarding state. For the staged migration, validate the affected path before expansion.

Incorrect Answers

A:

“Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior” targets a different operation from the reported requirement: “a route is present but only one of several equal-cost paths is actually eligible”. Only installed eligible equal-cost next hops can participate in forwarding. The confirming result is: the route has the expected eligible next-hop set in forwarding state. For the staged migration, validate the affected path before expansion.

C:

“Check only that the device hostname is listed in the inventory, without examining ecmp state analysis behavior” targets a different operation from the reported requirement: “a route is present but only one of several equal-cost paths is actually eligible”. Only installed eligible equal-cost next hops can participate in forwarding. The confirming result is: the route has the expected eligible next-hop set in forwarding state. For the staged migration, validate the affected path before expansion.

D:

“Use an unrelated tenant dashboard as proof, without verifying the required ecmp state analysis condition” targets a different operation from the reported requirement: “a route is present but only one of several equal-cost paths is actually eligible”. Only installed eligible equal-cost next hops can participate in forwarding. The confirming result is: the route has the expected eligible next-hop set in forwarding state. For the staged migration, validate the affected path before expansion.

Question 599

In the fictional Canyon-5 west pod, a fabric operations audit prior to tenant onboarding, the team reports that two different EVPN sources can advertise otherwise identical service prefixes. A peer suggested: "Use a route target as the only globally unique origin identifier" That did not solve the constraint. What should be chosen instead?

  1. Use a route target as the only globally unique origin identifier.
  2. Remove all identifiers to force unique route origin tracking.
  3. Assign appropriate route distinguishers so VPN routes have distinct identities.
  4. Use an interface ACL sequence number as a VPN route key.

Explanation

Correct Answer

C:

A route distinguisher contributes VPN route uniqueness and is separate from import policy. The option uses “Assign appropriate route distinguishers so VPN routes have distinct identities” to address “two different EVPN sources can advertise otherwise identical service prefixes”. The result must be observed on the affected component. Before onboarding, test that the intended fabric state exists.

Incorrect Answers

A:

“Use a route target as the only globally unique origin identifier” targets a different operation from the reported requirement: “two different EVPN sources can advertise otherwise identical service prefixes”. A route distinguisher contributes VPN route uniqueness and is separate from import policy. Use the appropriate method: Assign appropriate route distinguishers so VPN routes have distinct identities. Before onboarding, test that the intended fabric state exists.

B:

“Remove all identifiers to force unique route origin tracking” targets a different operation from the reported requirement: “two different EVPN sources can advertise otherwise identical service prefixes”. A route distinguisher contributes VPN route uniqueness and is separate from import policy. Use the appropriate method: Assign appropriate route distinguishers so VPN routes have distinct identities. Before onboarding, test that the intended fabric state exists.

D:

“Use an interface ACL sequence number as a VPN route key” targets a different operation from the reported requirement: “two different EVPN sources can advertise otherwise identical service prefixes”. A route distinguisher contributes VPN route uniqueness and is separate from import policy. Use the appropriate method: Assign appropriate route distinguishers so VPN routes have distinct identities. Before onboarding, test that the intended fabric state exists.

Question 600

In the fictional Atlas-7 east pod, a service recovery task following a partial path outage, the team reports that newly powered switches should receive initial configuration with minimal manual access. The shift handoff must specify a defensible solution and the observable service outcome. Which recommendation is technically justified?

  1. Expect a device to discover complete configuration from EVPN route targets alone.
  2. Assume DNS hostname changes automatically create the bootstrap configuration.
  3. Configure only a tenant MAC-VRF on a disconnected laptop.
  4. Provide the required ZTP discovery and bootstrap information through supported services.

Explanation

Correct Answer

D:

ZTP depends on reachable bootstrap infrastructure and device discovery behavior. For Atlas-7, confirm the actual outcome: the device discovers its bootstrap source and applies the intended initial configuration.

Incorrect Answers

A:

“Expect a device to discover complete configuration from EVPN route targets alone” targets a different operation from the reported requirement: “newly powered switches should receive initial configuration with minimal manual access”. ZTP depends on reachable bootstrap infrastructure and device discovery behavior. Use the appropriate method: Provide the required ZTP discovery and bootstrap information through supported services. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

B:

“Assume DNS hostname changes automatically create the bootstrap configuration” targets a different operation from the reported requirement: “newly powered switches should receive initial configuration with minimal manual access”. ZTP depends on reachable bootstrap infrastructure and device discovery behavior. Use the appropriate method: Provide the required ZTP discovery and bootstrap information through supported services. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

C:

“Configure only a tenant MAC-VRF on a disconnected laptop” targets a different operation from the reported requirement: “newly powered switches should receive initial configuration with minimal manual access”. ZTP depends on reachable bootstrap infrastructure and device discovery behavior. Use the appropriate method: Provide the required ZTP discovery and bootstrap information through supported services. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

Nokia Data Center Fabric Fundamentals (4A0-D01) Practice Tests