mcAfee Secure Website
exam =5
exam =6

Exam Code: 4A0-D01

Exam Name: Nokia Data Center Fabric Fundamentals

Certification Provider: Nokia

Nokia 4A0-D01 Questions & Answers

Reliable & Actual Study Materials for 4A0-D01 Exam Success

61 Questions & Answers with Testing Engine

"4A0-D01: Nokia Data Center Fabric Fundamentals" Testing Engine covers all the knowledge points of the real Nokia 4A0-D01 exam.

The latest actual 4A0-D01 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at 4A0-D01 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Nokia Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Nokia 4A0-D01 Practice Test 63

Question 620

In the fictional Atlas-7 east pod, a service recovery task following a partial path outage, the team reports that an underlay path needs rapid failure signaling between configured peers. A peer suggested: "Use EVPN route distinguishers as physical keepalive packets" That did not solve the constraint. What should be chosen instead?

  1. Turn off BGP neighbor transport to improve liveliness.
  2. Rely only on slow daily interface inventory exports.
  3. Use EVPN route distinguishers as physical keepalive packets.
  4. Configure and verify a supported BFD session for the relevant adjacency.

Explanation

Correct Answer

D:

BFD supplies protocol-independent rapid path liveliness detection when correctly bound to peers. For Atlas-7, confirm the actual outcome: the BFD session is up and its failure state correlates with the intended adjacency.

Incorrect Answers

A:

“Turn off BGP neighbor transport to improve liveliness” targets a different operation from the reported requirement: “an underlay path needs rapid failure signaling between configured peers”. BFD supplies protocol-independent rapid path liveliness detection when correctly bound to peers. Use the appropriate method: Configure and verify a supported BFD session for the relevant adjacency. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

B:

“Rely only on slow daily interface inventory exports” targets a different operation from the reported requirement: “an underlay path needs rapid failure signaling between configured peers”. BFD supplies protocol-independent rapid path liveliness detection when correctly bound to peers. Use the appropriate method: Configure and verify a supported BFD session for the relevant adjacency. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

C:

“Use EVPN route distinguishers as physical keepalive packets” targets a different operation from the reported requirement: “an underlay path needs rapid failure signaling between configured peers”. BFD supplies protocol-independent rapid path liveliness detection when correctly bound to peers. Use the appropriate method: Configure and verify a supported BFD session for the relevant adjacency. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

Question 621

In the fictional Metro-8 west pod, a multi-tenant fabric undergoing documented validation, the team reports that a management client needs a structured request-response configuration interface. An unrelated configuration change is being considered. Which focused remediation best addresses the described problem first?

  1. Use the supported SR Linux JSON-RPC management interface.
  2. Poll an unrelated time server for router configuration state.
  3. Send an Ethernet broadcast as a configuration API request.
  4. Edit platform binaries directly to change configuration.

Explanation

Correct Answer

A:

JSON-RPC offers a structured management access method instead of screen scraping. The option uses “Use the supported SR Linux JSON-RPC management interface” to address “a management client needs a structured request-response configuration interface”. The result must be observed on the affected component. Observe the relevant forwarding/control-plane behavior under the approved test.

Incorrect Answers

B:

“Poll an unrelated time server for router configuration state” targets a different operation from the reported requirement: “a management client needs a structured request-response configuration interface”. JSON-RPC offers a structured management access method instead of screen scraping. Use the appropriate method: Use the supported SR Linux JSON-RPC management interface. Observe the relevant forwarding/control-plane behavior under the approved test.

C:

“Send an Ethernet broadcast as a configuration API request” targets a different operation from the reported requirement: “a management client needs a structured request-response configuration interface”. JSON-RPC offers a structured management access method instead of screen scraping. Use the appropriate method: Use the supported SR Linux JSON-RPC management interface. Observe the relevant forwarding/control-plane behavior under the approved test.

D:

“Edit platform binaries directly to change configuration” targets a different operation from the reported requirement: “a management client needs a structured request-response configuration interface”. JSON-RPC offers a structured management access method instead of screen scraping. Use the appropriate method: Use the supported SR Linux JSON-RPC management interface. Observe the relevant forwarding/control-plane behavior under the approved test.

Question 622

In the fictional Atlas-7 west pod, a service recovery task following a partial path outage, the team reports that several operators repeatedly use the same long diagnostic command. A peer suggested: "Add a BGP community only to shorten the command text" That did not solve the constraint. What should be chosen instead?

  1. Reboot the switch after every repeated command.
  2. Create an appropriate CLI alias for the recurring diagnostic command.
  3. Create a data-plane VXLAN tunnel for terminal convenience.
  4. Add a BGP community only to shorten the command text.

Explanation

Correct Answer

B:

Aliases improve CLI usability without altering network forwarding semantics. The option uses “Create an appropriate CLI alias for the recurring diagnostic command” to address “several operators repeatedly use the same long diagnostic command”. The result must be observed on the affected component. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

Incorrect Answers

A:

“Reboot the switch after every repeated command” targets a different operation from the reported requirement: “several operators repeatedly use the same long diagnostic command”. Aliases improve CLI usability without altering network forwarding semantics. Use the appropriate method: Create an appropriate CLI alias for the recurring diagnostic command. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

C:

“Create a data-plane VXLAN tunnel for terminal convenience” targets a different operation from the reported requirement: “several operators repeatedly use the same long diagnostic command”. Aliases improve CLI usability without altering network forwarding semantics. Use the appropriate method: Create an appropriate CLI alias for the recurring diagnostic command. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

D:

“Add a BGP community only to shorten the command text” targets a different operation from the reported requirement: “several operators repeatedly use the same long diagnostic command”. Aliases improve CLI usability without altering network forwarding semantics. Use the appropriate method: Create an appropriate CLI alias for the recurring diagnostic command. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

Question 623

In the fictional Metro-8 east pod, a multi-tenant fabric undergoing documented validation, the team reports that separate customers must not share unintended bridge or routing tables. A peer suggested: "Disable all segmentation and rely on hostnames" That did not solve the constraint. What should be chosen instead?

  1. Disable all segmentation and rely on hostnames.
  2. Put every tenant into the default network instance without controls.
  3. Associate tenant segments with appropriate MAC-VRFs and IP-VRFs.
  4. Assign the same L2 broadcast domain to every customer.

Explanation

Correct Answer

C:

Distinct virtual routing and bridging instances provide explicit tenant forwarding boundaries. For Metro-8, confirm the actual outcome: tenant routes and MACs occur only in the intended network instances.

Incorrect Answers

A:

“Disable all segmentation and rely on hostnames” targets a different operation from the reported requirement: “separate customers must not share unintended bridge or routing tables”. Distinct virtual routing and bridging instances provide explicit tenant forwarding boundaries. Use the appropriate method: Associate tenant segments with appropriate MAC-VRFs and IP-VRFs. Observe the relevant forwarding/control-plane behavior under the approved test.

B:

“Put every tenant into the default network instance without controls” targets a different operation from the reported requirement: “separate customers must not share unintended bridge or routing tables”. Distinct virtual routing and bridging instances provide explicit tenant forwarding boundaries. Use the appropriate method: Associate tenant segments with appropriate MAC-VRFs and IP-VRFs. Observe the relevant forwarding/control-plane behavior under the approved test.

D:

“Assign the same L2 broadcast domain to every customer” targets a different operation from the reported requirement: “separate customers must not share unintended bridge or routing tables”. Distinct virtual routing and bridging instances provide explicit tenant forwarding boundaries. Use the appropriate method: Associate tenant segments with appropriate MAC-VRFs and IP-VRFs. Observe the relevant forwarding/control-plane behavior under the approved test.

Question 624

In the fictional Pine-9 east pod, a replacement leaf with configuration review requirements, the team reports that two access ports must share tenant Layer 2 reachability without becoming a global bridge. The shift handoff must specify a defensible solution and the observable service outcome. Which recommendation is technically justified?

  1. Leak all tenant routes into the default network instance.
  2. Use an IP-VRF alone as the Ethernet switching table.
  3. Use a CPM policer as the VLAN-to-bridge mapping.
  4. Attach the ports to the intended MAC-VRF bridge domain.

Explanation

Correct Answer

D:

A MAC-VRF supplies tenant Layer 2 MAC-learning and bridging scope. For Pine-9, confirm the actual outcome: the local tenant MACs learn within only the chosen MAC-VRF.

Incorrect Answers

A:

“Leak all tenant routes into the default network instance” targets a different operation from the reported requirement: “two access ports must share tenant Layer 2 reachability without becoming a global bridge”. A MAC-VRF supplies tenant Layer 2 MAC-learning and bridging scope. Use the appropriate method: Attach the ports to the intended MAC-VRF bridge domain. Confirm that the replacement leaf reaches the expected operational state.

B:

“Use an IP-VRF alone as the Ethernet switching table” targets a different operation from the reported requirement: “two access ports must share tenant Layer 2 reachability without becoming a global bridge”. A MAC-VRF supplies tenant Layer 2 MAC-learning and bridging scope. Use the appropriate method: Attach the ports to the intended MAC-VRF bridge domain. Confirm that the replacement leaf reaches the expected operational state.

C:

“Use a CPM policer as the VLAN-to-bridge mapping” targets a different operation from the reported requirement: “two access ports must share tenant Layer 2 reachability without becoming a global bridge”. A MAC-VRF supplies tenant Layer 2 MAC-learning and bridging scope. Use the appropriate method: Attach the ports to the intended MAC-VRF bridge domain. Confirm that the replacement leaf reaches the expected operational state.

Question 625

In the fictional Summit-4 east pod, a change-freeze exception for a narrow operational fault, the team reports that a fabric alert could be caused by either a physical link failure or a BGP issue. An unrelated configuration change is being considered. Which focused remediation best addresses the described problem first?

  1. Correlate interface state and counters with BGP/BFD events and logs.
  2. Conclude the cause from the alert title alone without checking state.
  3. Change all overlay VNIs before looking at the underlay.
  4. Use one unrelated tenant ping as the sole cause analysis.

Explanation

Correct Answer

A:

Cross-layer evidence helps distinguish correlated failures from downstream symptoms. For Summit-4, confirm the actual outcome: timestamped link and adjacency events explain the impacted routes and tenants.

Incorrect Answers

B:

“Conclude the cause from the alert title alone without checking state” targets a different operation from the reported requirement: “a fabric alert could be caused by either a physical link failure or a BGP issue”. Cross-layer evidence helps distinguish correlated failures from downstream symptoms. Use the appropriate method: Correlate interface state and counters with BGP/BFD events and logs.

C:

“Change all overlay VNIs before looking at the underlay” targets a different operation from the reported requirement: “a fabric alert could be caused by either a physical link failure or a BGP issue”. Cross-layer evidence helps distinguish correlated failures from downstream symptoms. Use the appropriate method: Correlate interface state and counters with BGP/BFD events and logs.

D:

“Use one unrelated tenant ping as the sole cause analysis” targets a different operation from the reported requirement: “a fabric alert could be caused by either a physical link failure or a BGP issue”. Cross-layer evidence helps distinguish correlated failures from downstream symptoms. Use the appropriate method: Correlate interface state and counters with BGP/BFD events and logs.

Question 626

In the fictional Metro-8 east pod, a multi-tenant fabric undergoing documented validation, the team reports that IPv6 traffic fails while IPv4 routes to the same leaf are healthy. Which engineering action best satisfies this request?

  1. Change an IPv4-only ACL and declare IPv6 restored.
  2. Inspect the IPv6 address-family routes and next-hop resolution separately.
  3. Assume healthy IPv4 forwarding proves IPv6 route installation.
  4. Move the entire tenant into a Layer 2 hub.

Explanation

Correct Answer

B:

The two IP address families have distinct routes and reachability requirements. For Metro-8, confirm the actual outcome: the IPv6 destination and next hop are installed in the intended route table.

Incorrect Answers

A:

“Change an IPv4-only ACL and declare IPv6 restored” targets a different operation from the reported requirement: “IPv6 traffic fails while IPv4 routes to the same leaf are healthy”. The two IP address families have distinct routes and reachability requirements. Use the appropriate method: Inspect the IPv6 address-family routes and next-hop resolution separately. Observe the relevant forwarding/control-plane behavior under the approved test.

C:

“Assume healthy IPv4 forwarding proves IPv6 route installation” targets a different operation from the reported requirement: “IPv6 traffic fails while IPv4 routes to the same leaf are healthy”. The two IP address families have distinct routes and reachability requirements. Use the appropriate method: Inspect the IPv6 address-family routes and next-hop resolution separately. Observe the relevant forwarding/control-plane behavior under the approved test.

D:

“Move the entire tenant into a Layer 2 hub” targets a different operation from the reported requirement: “IPv6 traffic fails while IPv4 routes to the same leaf are healthy”. The two IP address families have distinct routes and reachability requirements. Use the appropriate method: Inspect the IPv6 address-family routes and next-hop resolution separately. Observe the relevant forwarding/control-plane behavior under the approved test.

Question 627

In the fictional Metro-8 west pod, a multi-tenant fabric undergoing documented validation, the team reports that a support team wants reusable context values across diagnostic commands. Which engineering action best satisfies this request?

  1. Advertise CLI strings as EVPN prefixes.
  2. Write a static route for every terminal shortcut.
  3. Use supported CLI environment variables for repeatable command contexts.
  4. Edit an ACL policer as a substitute for CLI variables.

Explanation

Correct Answer

C:

Environment variables organize command-line context rather than protocol forwarding. For Metro-8, confirm the actual outcome: the intended CLI context resolves consistently during diagnostics.

Incorrect Answers

A:

“Advertise CLI strings as EVPN prefixes” targets a different operation from the reported requirement: “a support team wants reusable context values across diagnostic commands”. Environment variables organize command-line context rather than protocol forwarding. Use the appropriate method: Use supported CLI environment variables for repeatable command contexts. Observe the relevant forwarding/control-plane behavior under the approved test.

B:

“Write a static route for every terminal shortcut” targets a different operation from the reported requirement: “a support team wants reusable context values across diagnostic commands”. Environment variables organize command-line context rather than protocol forwarding. Use the appropriate method: Use supported CLI environment variables for repeatable command contexts. Observe the relevant forwarding/control-plane behavior under the approved test.

D:

“Edit an ACL policer as a substitute for CLI variables” targets a different operation from the reported requirement: “a support team wants reusable context values across diagnostic commands”. Environment variables organize command-line context rather than protocol forwarding. Use the appropriate method: Use supported CLI environment variables for repeatable command contexts. Observe the relevant forwarding/control-plane behavior under the approved test.

Question 628

In the fictional Canyon-5 east pod, a fabric operations audit prior to tenant onboarding, the team reports that an intermittent EVPN event requires a chronological evidence trail. The planned change is "Inspect SR Linux operational logs with relevant timestamps and components." Which post-change observation best validates the intended technical behavior?

  1. Check only that the device hostname is listed in the inventory, without examining operational logs behavior.
  2. Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior.
  3. Use an unrelated tenant dashboard as proof, without verifying the required operational logs condition.
  4. Verify that logged events align with the observed incident window and relevant component.

Explanation

Correct Answer

D:

Logs provide timestamped operational context that can be correlated with state changes. The option uses “Verify that logged events align with the observed incident window and relevant component” to address “an intermittent EVPN event requires a chronological evidence trail”. The acceptance test is: logged events align with the observed incident window and relevant component. Before onboarding, test that the intended fabric state exists.

Incorrect Answers

A:

“Check only that the device hostname is listed in the inventory, without examining operational logs behavior” targets a different operation from the reported requirement: “an intermittent EVPN event requires a chronological evidence trail”. Logs provide timestamped operational context that can be correlated with state changes. The confirming result is: logged events align with the observed incident window and relevant component. Before onboarding, test that the intended fabric state exists.

B:

“Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior” targets a different operation from the reported requirement: “an intermittent EVPN event requires a chronological evidence trail”. Logs provide timestamped operational context that can be correlated with state changes. The confirming result is: logged events align with the observed incident window and relevant component. Before onboarding, test that the intended fabric state exists.

C:

“Use an unrelated tenant dashboard as proof, without verifying the required operational logs condition” targets a different operation from the reported requirement: “an intermittent EVPN event requires a chronological evidence trail”. Logs provide timestamped operational context that can be correlated with state changes. The confirming result is: logged events align with the observed incident window and relevant component. Before onboarding, test that the intended fabric state exists.

Question 629

In the fictional North-10 west pod, a commissioning exercise under the on-call team, the team reports that a policy requires a destination prefix to be explicitly discarded. An unrelated configuration change is being considered. Which focused remediation best addresses the described problem first?

  1. Use a properly scoped static blackhole disposition for that prefix.
  2. Assign a CLI shortcut that echoes the prefix.
  3. Create an EVPN Type 2 MAC advertisement for all discarded packets.
  4. Publish the prefix as a bridged access VLAN.

Explanation

Correct Answer

A:

A blackhole route deliberately discards matching traffic rather than forwarding it. The option uses “Use a properly scoped static blackhole disposition for that prefix” to address “a policy requires a destination prefix to be explicitly discarded”. The result must be observed on the affected component. Before onboarding, test that the intended fabric state exists.

Incorrect Answers

B:

“Assign a CLI shortcut that echoes the prefix” targets a different operation from the reported requirement: “a policy requires a destination prefix to be explicitly discarded”. A blackhole route deliberately discards matching traffic rather than forwarding it. Use the appropriate method: Use a properly scoped static blackhole disposition for that prefix. Before onboarding, test that the intended fabric state exists.

C:

“Create an EVPN Type 2 MAC advertisement for all discarded packets” targets a different operation from the reported requirement: “a policy requires a destination prefix to be explicitly discarded”. A blackhole route deliberately discards matching traffic rather than forwarding it. Use the appropriate method: Use a properly scoped static blackhole disposition for that prefix. Before onboarding, test that the intended fabric state exists.

D:

“Publish the prefix as a bridged access VLAN” targets a different operation from the reported requirement: “a policy requires a destination prefix to be explicitly discarded”. A blackhole route deliberately discards matching traffic rather than forwarding it. Use the appropriate method: Use a properly scoped static blackhole disposition for that prefix. Before onboarding, test that the intended fabric state exists.

Question 630

In the fictional Canyon-5 east pod, a fabric operations audit prior to tenant onboarding, the team reports that a remote overlay endpoint cannot be reached over the physical fabric. An unrelated configuration change is being considered. Which focused remediation best addresses the described problem first?

  1. Recreate the tenant VLAN without checking IP reachability.
  2. Restore IP routing reachability to the remote VTEP address in the underlay.
  3. Disable BGP EVPN to hide underlay route loss.
  4. Change the application hostname while leaving the network unchanged.

Explanation

Correct Answer

B:

An overlay packet still needs an IP path to its outer tunnel destination. For Canyon-5, confirm the actual outcome: the remote VTEP loopback is reachable through the intended underlay route.

Incorrect Answers

A:

“Recreate the tenant VLAN without checking IP reachability” targets a different operation from the reported requirement: “a remote overlay endpoint cannot be reached over the physical fabric”. An overlay packet still needs an IP path to its outer tunnel destination. Use the appropriate method: Restore IP routing reachability to the remote VTEP address in the underlay. Before onboarding, test that the intended fabric state exists.

C:

“Disable BGP EVPN to hide underlay route loss” targets a different operation from the reported requirement: “a remote overlay endpoint cannot be reached over the physical fabric”. An overlay packet still needs an IP path to its outer tunnel destination. Use the appropriate method: Restore IP routing reachability to the remote VTEP address in the underlay. Before onboarding, test that the intended fabric state exists.

D:

“Change the application hostname while leaving the network unchanged” targets a different operation from the reported requirement: “a remote overlay endpoint cannot be reached over the physical fabric”. An overlay packet still needs an IP path to its outer tunnel destination. Use the appropriate method: Restore IP routing reachability to the remote VTEP address in the underlay. Before onboarding, test that the intended fabric state exists.

Nokia Data Center Fabric Fundamentals (4A0-D01) Practice Tests