mcAfee Secure Website
exam =5
exam =6

Exam Code: 4A0-D01

Exam Name: Nokia Data Center Fabric Fundamentals

Certification Provider: Nokia

Nokia 4A0-D01 Questions & Answers

Reliable & Actual Study Materials for 4A0-D01 Exam Success

61 Questions & Answers with Testing Engine

"4A0-D01: Nokia Data Center Fabric Fundamentals" Testing Engine covers all the knowledge points of the real Nokia 4A0-D01 exam.

The latest actual 4A0-D01 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at 4A0-D01 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Nokia Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Nokia 4A0-D01 Practice Test 58

Question 570

In the fictional Pine-9 west pod, a replacement leaf with configuration review requirements, the team reports that a route appears in logs but cannot be found in the active forwarding table. The planned change is "Compare logs with current protocol and forwarding state." Which post-change observation best validates the intended technical behavior?

  1. Check only that the device hostname is listed in the inventory, without examining log versus forwarding evidence behavior.
  2. Verify that current routing and FIB observations agree with the incident interpretation.
  3. Use an unrelated tenant dashboard as proof, without verifying the required log versus forwarding evidence condition.
  4. Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior.

Explanation

Correct Answer

B:

Historical events alone do not establish currently installed forwarding state. The option uses “Verify that current routing and FIB observations agree with the incident interpretation” to address “a route appears in logs but cannot be found in the active forwarding table”. The acceptance test is: current routing and FIB observations agree with the incident interpretation. Confirm that the replacement leaf reaches the expected operational state.

Incorrect Answers

A:

“Check only that the device hostname is listed in the inventory, without examining log versus forwarding evidence behavior” targets a different operation from the reported requirement: “a route appears in logs but cannot be found in the active forwarding table”. Historical events alone do not establish currently installed forwarding state. The confirming result is: current routing and FIB observations agree with the incident interpretation. Confirm that the replacement leaf reaches the expected operational state.

C:

“Use an unrelated tenant dashboard as proof, without verifying the required log versus forwarding evidence condition” targets a different operation from the reported requirement: “a route appears in logs but cannot be found in the active forwarding table”. Historical events alone do not establish currently installed forwarding state. The confirming result is: current routing and FIB observations agree with the incident interpretation. Confirm that the replacement leaf reaches the expected operational state.

D:

“Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior” targets a different operation from the reported requirement: “a route appears in logs but cannot be found in the active forwarding table”. Historical events alone do not establish currently installed forwarding state. The confirming result is: current routing and FIB observations agree with the incident interpretation. Confirm that the replacement leaf reaches the expected operational state.

Question 571

In the fictional North-10 east pod, a commissioning exercise under the on-call team, the team reports that a manually configured destination prefix has no usable forwarding adjacency. The shift handoff must specify a defensible solution and the observable service outcome. Which recommendation is technically justified?

  1. Use a MAC move event as a static route next hop.
  2. Change the device hostname to match the prefix.
  3. Reference an appropriate reachable next-hop group for the static route.
  4. Record the route only in syslog without installing it.

Explanation

Correct Answer

C:

A static route needs a viable forwarding disposition or next-hop resolution. For North-10, confirm the actual outcome: the static prefix is installed with a valid resolved forwarding next hop.

Incorrect Answers

A:

“Use a MAC move event as a static route next hop” targets a different operation from the reported requirement: “a manually configured destination prefix has no usable forwarding adjacency”. A static route needs a viable forwarding disposition or next-hop resolution. Use the appropriate method: Reference an appropriate reachable next-hop group for the static route. Before onboarding, test that the intended fabric state exists.

B:

“Change the device hostname to match the prefix” targets a different operation from the reported requirement: “a manually configured destination prefix has no usable forwarding adjacency”. A static route needs a viable forwarding disposition or next-hop resolution. Use the appropriate method: Reference an appropriate reachable next-hop group for the static route. Before onboarding, test that the intended fabric state exists.

D:

“Record the route only in syslog without installing it” targets a different operation from the reported requirement: “a manually configured destination prefix has no usable forwarding adjacency”. A static route needs a viable forwarding disposition or next-hop resolution. Use the appropriate method: Reference an appropriate reachable next-hop group for the static route. Before onboarding, test that the intended fabric state exists.

Question 572

In the fictional Summit-4 west pod, a change-freeze exception for a narrow operational fault, the team reports that management access to the switch itself must be restricted. Which engineering action best satisfies this request?

  1. Change a VXLAN VNI as an SSH authentication filter.
  2. Disable tenant EVPN routes to secure the management endpoint.
  3. Use only a tenant interface ACL and assume it protects all device management.
  4. Use the applicable system ACL or management-access policy for device-bound traffic.

Explanation

Correct Answer

D:

System-level access filtering concerns traffic destined to the device, not just transit services. The option uses “Use the applicable system ACL or management-access policy for device-bound traffic” to address “management access to the switch itself must be restricted”. The result must be observed on the affected component.

Incorrect Answers

A:

“Change a VXLAN VNI as an SSH authentication filter” targets a different operation from the reported requirement: “management access to the switch itself must be restricted”. System-level access filtering concerns traffic destined to the device, not just transit services. Use the appropriate method: Use the applicable system ACL or management-access policy for device-bound traffic.

B:

“Disable tenant EVPN routes to secure the management endpoint” targets a different operation from the reported requirement: “management access to the switch itself must be restricted”. System-level access filtering concerns traffic destined to the device, not just transit services. Use the appropriate method: Use the applicable system ACL or management-access policy for device-bound traffic.

C:

“Use only a tenant interface ACL and assume it protects all device management” targets a different operation from the reported requirement: “management access to the switch itself must be restricted”. System-level access filtering concerns traffic destined to the device, not just transit services. Use the appropriate method: Use the applicable system ACL or management-access policy for device-bound traffic.

Question 573

In the fictional Harbor-1 west pod, a staged top-of-rack rollout with a bounded maintenance window, the team reports that a support user needs limited read-only access to device state. Which engineering action best satisfies this request?

  1. Assign an appropriate SR Linux user role with scoped privileges.
  2. Change the system ACL only and ignore role authorization.
  3. Advertise login privilege as a BGP route community.
  4. Share the full administrator credential with every operator.

Explanation

Correct Answer

A:

Role-based authorization limits what authenticated users can view or modify. The option uses “Assign an appropriate SR Linux user role with scoped privileges” to address “a support user needs limited read-only access to device state”. The result must be observed on the affected component.

Incorrect Answers

B:

“Change the system ACL only and ignore role authorization” targets a different operation from the reported requirement: “a support user needs limited read-only access to device state”. Role-based authorization limits what authenticated users can view or modify. Use the appropriate method: Assign an appropriate SR Linux user role with scoped privileges.

C:

“Advertise login privilege as a BGP route community” targets a different operation from the reported requirement: “a support user needs limited read-only access to device state”. Role-based authorization limits what authenticated users can view or modify. Use the appropriate method: Assign an appropriate SR Linux user role with scoped privileges.

D:

“Share the full administrator credential with every operator” targets a different operation from the reported requirement: “a support user needs limited read-only access to device state”. Role-based authorization limits what authenticated users can view or modify. Use the appropriate method: Assign an appropriate SR Linux user role with scoped privileges.

Question 574

In the fictional Metro-8 east pod, a multi-tenant fabric undergoing documented validation, the team reports that two access ports must share tenant Layer 2 reachability without becoming a global bridge. A peer suggested: "Leak all tenant routes into the default network instance" That did not solve the constraint. What should be chosen instead?

  1. Use a CPM policer as the VLAN-to-bridge mapping.
  2. Attach the ports to the intended MAC-VRF bridge domain.
  3. Use an IP-VRF alone as the Ethernet switching table.
  4. Leak all tenant routes into the default network instance.

Explanation

Correct Answer

B:

A MAC-VRF supplies tenant Layer 2 MAC-learning and bridging scope. The option uses “Attach the ports to the intended MAC-VRF bridge domain” to address “two access ports must share tenant Layer 2 reachability without becoming a global bridge”. The result must be observed on the affected component. Observe the relevant forwarding/control-plane behavior under the approved test.

Incorrect Answers

A:

“Use a CPM policer as the VLAN-to-bridge mapping” targets a different operation from the reported requirement: “two access ports must share tenant Layer 2 reachability without becoming a global bridge”. A MAC-VRF supplies tenant Layer 2 MAC-learning and bridging scope. Use the appropriate method: Attach the ports to the intended MAC-VRF bridge domain. Observe the relevant forwarding/control-plane behavior under the approved test.

C:

“Use an IP-VRF alone as the Ethernet switching table” targets a different operation from the reported requirement: “two access ports must share tenant Layer 2 reachability without becoming a global bridge”. A MAC-VRF supplies tenant Layer 2 MAC-learning and bridging scope. Use the appropriate method: Attach the ports to the intended MAC-VRF bridge domain. Observe the relevant forwarding/control-plane behavior under the approved test.

D:

“Leak all tenant routes into the default network instance” targets a different operation from the reported requirement: “two access ports must share tenant Layer 2 reachability without becoming a global bridge”. A MAC-VRF supplies tenant Layer 2 MAC-learning and bridging scope. Use the appropriate method: Attach the ports to the intended MAC-VRF bridge domain. Observe the relevant forwarding/control-plane behavior under the approved test.

Question 575

In the fictional Summit-4 west pod, a change-freeze exception for a narrow operational fault, the team reports that newly powered switches should receive initial configuration with minimal manual access. The shift handoff must specify a defensible solution and the observable service outcome. Which recommendation is technically justified?

  1. Assume DNS hostname changes automatically create the bootstrap configuration.
  2. Expect a device to discover complete configuration from EVPN route targets alone.
  3. Provide the required ZTP discovery and bootstrap information through supported services.
  4. Configure only a tenant MAC-VRF on a disconnected laptop.

Explanation

Correct Answer

C:

ZTP depends on reachable bootstrap infrastructure and device discovery behavior. For Summit-4, confirm the actual outcome: the device discovers its bootstrap source and applies the intended initial configuration.

Incorrect Answers

A:

“Assume DNS hostname changes automatically create the bootstrap configuration” targets a different operation from the reported requirement: “newly powered switches should receive initial configuration with minimal manual access”. ZTP depends on reachable bootstrap infrastructure and device discovery behavior. Use the appropriate method: Provide the required ZTP discovery and bootstrap information through supported services.

B:

“Expect a device to discover complete configuration from EVPN route targets alone” targets a different operation from the reported requirement: “newly powered switches should receive initial configuration with minimal manual access”. ZTP depends on reachable bootstrap infrastructure and device discovery behavior. Use the appropriate method: Provide the required ZTP discovery and bootstrap information through supported services.

D:

“Configure only a tenant MAC-VRF on a disconnected laptop” targets a different operation from the reported requirement: “newly powered switches should receive initial configuration with minimal manual access”. ZTP depends on reachable bootstrap infrastructure and device discovery behavior. Use the appropriate method: Provide the required ZTP discovery and bootstrap information through supported services.

Question 576

In the fictional Metro-8 west pod, a multi-tenant fabric undergoing documented validation, the team reports that operators disagree whether a deployed interface ACL actually matches the failing flow. An unrelated configuration change is being considered. Which focused remediation best addresses the described problem first?

  1. Use only a route table to prove which ACL entry matched.
  2. Replace a MAC-VRF as a substitute for ACL telemetry.
  3. Assume zero-interface-error count proves an ACL permit decision.
  4. Inspect ACL hit counters and correlate them with test traffic.

Explanation

Correct Answer

D:

ACL entry counters can substantiate matching behavior when correlated with the flow. For Metro-8, confirm the actual outcome: the expected ACL rule hit count changes under controlled test packets.

Incorrect Answers

A:

“Use only a route table to prove which ACL entry matched” targets a different operation from the reported requirement: “operators disagree whether a deployed interface ACL actually matches the failing flow”. ACL entry counters can substantiate matching behavior when correlated with the flow. Use the appropriate method: Inspect ACL hit counters and correlate them with test traffic. Observe the relevant forwarding/control-plane behavior under the approved test.

B:

“Replace a MAC-VRF as a substitute for ACL telemetry” targets a different operation from the reported requirement: “operators disagree whether a deployed interface ACL actually matches the failing flow”. ACL entry counters can substantiate matching behavior when correlated with the flow. Use the appropriate method: Inspect ACL hit counters and correlate them with test traffic. Observe the relevant forwarding/control-plane behavior under the approved test.

C:

“Assume zero-interface-error count proves an ACL permit decision” targets a different operation from the reported requirement: “operators disagree whether a deployed interface ACL actually matches the failing flow”. ACL entry counters can substantiate matching behavior when correlated with the flow. Use the appropriate method: Inspect ACL hit counters and correlate them with test traffic. Observe the relevant forwarding/control-plane behavior under the approved test.

Question 577

In the fictional Summit-4 east pod, a change-freeze exception for a narrow operational fault, the team reports that a remote overlay endpoint cannot be reached over the physical fabric. The planned change is "Restore IP routing reachability to the remote VTEP address in the underlay." Which post-change observation best validates the intended technical behavior?

  1. Verify that the remote VTEP loopback is reachable through the intended underlay route.
  2. Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior.
  3. Use an unrelated tenant dashboard as proof, without verifying the required underlay reachability condition.
  4. Check only that the device hostname is listed in the inventory, without examining underlay reachability behavior.

Explanation

Correct Answer

A:

An overlay packet still needs an IP path to its outer tunnel destination. The option uses “Verify that the remote VTEP loopback is reachable through the intended underlay route” to address “a remote overlay endpoint cannot be reached over the physical fabric”. The acceptance test is: the remote VTEP loopback is reachable through the intended underlay route.

Incorrect Answers

B:

“Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior” targets a different operation from the reported requirement: “a remote overlay endpoint cannot be reached over the physical fabric”. An overlay packet still needs an IP path to its outer tunnel destination. The confirming result is: the remote VTEP loopback is reachable through the intended underlay route.

C:

“Use an unrelated tenant dashboard as proof, without verifying the required underlay reachability condition” targets a different operation from the reported requirement: “a remote overlay endpoint cannot be reached over the physical fabric”. An overlay packet still needs an IP path to its outer tunnel destination. The confirming result is: the remote VTEP loopback is reachable through the intended underlay route.

D:

“Check only that the device hostname is listed in the inventory, without examining underlay reachability behavior” targets a different operation from the reported requirement: “a remote overlay endpoint cannot be reached over the physical fabric”. An overlay packet still needs an IP path to its outer tunnel destination. The confirming result is: the remote VTEP loopback is reachable through the intended underlay route.

Question 578

In the fictional Harbor-1 east pod, a staged top-of-rack rollout with a bounded maintenance window, the team reports that the fabric must limit large shared Layer 2 failure domains. The shift handoff must specify a defensible solution and the observable service outcome. Which recommendation is technically justified?

  1. Rely on an overlay tunnel without any IP routing underneath.
  2. Use Layer 3 routed links between leaf and spine switches.
  3. Stretch one unbroken VLAN over every underlay link.
  4. Build the fabric from a single shared collision domain.

Explanation

Correct Answer

B:

A routed underlay confines broadcast domains and supplies IP reachability for the overlay. For Harbor-1, confirm the actual outcome: routed underlay next hops reach all required VTEPs.

Incorrect Answers

A:

“Rely on an overlay tunnel without any IP routing underneath” targets a different operation from the reported requirement: “the fabric must limit large shared Layer 2 failure domains”. A routed underlay confines broadcast domains and supplies IP reachability for the overlay. Use the appropriate method: Use Layer 3 routed links between leaf and spine switches.

C:

“Stretch one unbroken VLAN over every underlay link” targets a different operation from the reported requirement: “the fabric must limit large shared Layer 2 failure domains”. A routed underlay confines broadcast domains and supplies IP reachability for the overlay. Use the appropriate method: Use Layer 3 routed links between leaf and spine switches.

D:

“Build the fabric from a single shared collision domain” targets a different operation from the reported requirement: “the fabric must limit large shared Layer 2 failure domains”. A routed underlay confines broadcast domains and supplies IP reachability for the overlay. Use the appropriate method: Use Layer 3 routed links between leaf and spine switches.

Question 579

In the fictional Delta-6 east pod, a controller-managed extension requiring reproducible evidence, the team reports that a JSON-RPC automation client must connect securely to SR Linux. Which engineering action best satisfies this request?

  1. Use BGP ECMP weights as transport encryption keys.
  2. Use a tenant interface alias as an HTTPS server certificate.
  3. Associate an appropriate TLS server profile with the JSON-RPC service.
  4. Enable every untrusted client without authentication.

Explanation

Correct Answer

C:

Management API security requires an appropriate server identity and transport protection. For Delta-6, confirm the actual outcome: authorized clients connect using validated TLS settings.

Incorrect Answers

A:

“Use BGP ECMP weights as transport encryption keys” targets a different operation from the reported requirement: “a JSON-RPC automation client must connect securely to SR Linux”. Management API security requires an appropriate server identity and transport protection. Use the appropriate method: Associate an appropriate TLS server profile with the JSON-RPC service.

B:

“Use a tenant interface alias as an HTTPS server certificate” targets a different operation from the reported requirement: “a JSON-RPC automation client must connect securely to SR Linux”. Management API security requires an appropriate server identity and transport protection. Use the appropriate method: Associate an appropriate TLS server profile with the JSON-RPC service.

D:

“Enable every untrusted client without authentication” targets a different operation from the reported requirement: “a JSON-RPC automation client must connect securely to SR Linux”. Management API security requires an appropriate server identity and transport protection. Use the appropriate method: Associate an appropriate TLS server profile with the JSON-RPC service.

Question 580

In the fictional Orchard-3 west pod, a lab-to-production migration after a successful canary, the team reports that a policy must restrict selected transit traffic entering one tenant-facing interface. A peer suggested: "Apply only a management-plane system ACL to filter all transit packets" That did not solve the constraint. What should be chosen instead?

  1. Alter CLI aliases to block tenant traffic.
  2. Change a BGP route distinguisher as the packet filter.
  3. Apply only a management-plane system ACL to filter all transit packets.
  4. Apply an appropriate ingress interface ACL to that attachment.

Explanation

Correct Answer

D:

An interface ACL applies packet filtering to traffic on the scoped interface path. The option uses “Apply an appropriate ingress interface ACL to that attachment” to address “a policy must restrict selected transit traffic entering one tenant-facing interface”. The acceptance test is: matching transit flows are filtered while permitted flows continue. For the staged migration, validate the affected path before expansion.

Incorrect Answers

A:

“Alter CLI aliases to block tenant traffic” targets a different operation from the reported requirement: “a policy must restrict selected transit traffic entering one tenant-facing interface”. An interface ACL applies packet filtering to traffic on the scoped interface path. The confirming result is: matching transit flows are filtered while permitted flows continue. For the staged migration, validate the affected path before expansion.

B:

“Change a BGP route distinguisher as the packet filter” targets a different operation from the reported requirement: “a policy must restrict selected transit traffic entering one tenant-facing interface”. An interface ACL applies packet filtering to traffic on the scoped interface path. The confirming result is: matching transit flows are filtered while permitted flows continue. For the staged migration, validate the affected path before expansion.

C:

“Apply only a management-plane system ACL to filter all transit packets” targets a different operation from the reported requirement: “a policy must restrict selected transit traffic entering one tenant-facing interface”. An interface ACL applies packet filtering to traffic on the scoped interface path. The confirming result is: matching transit flows are filtered while permitted flows continue. For the staged migration, validate the affected path before expansion.

Nokia Data Center Fabric Fundamentals (4A0-D01) Practice Tests