mcAfee Secure Website
exam =5
exam =6

Exam Code: 4A0-D01

Exam Name: Nokia Data Center Fabric Fundamentals

Certification Provider: Nokia

Nokia 4A0-D01 Questions & Answers

Reliable & Actual Study Materials for 4A0-D01 Exam Success

61 Questions & Answers with Testing Engine

"4A0-D01: Nokia Data Center Fabric Fundamentals" Testing Engine covers all the knowledge points of the real Nokia 4A0-D01 exam.

The latest actual 4A0-D01 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at 4A0-D01 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Nokia Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Nokia 4A0-D01 Practice Test 52

Question 510

In the fictional Ridge-2 east pod, a secondary data hall with tenant isolation requirements, the team reports that operators need to compare desired fabric behavior with measured network state. A peer suggested: "Use one manually updated spreadsheet as a live telemetry stream" That did not solve the constraint. What should be chosen instead?

  1. Ignore all network events once the initial intent is accepted.
  2. Use EDA observability with state-driven monitoring and event correlation.
  3. Assume a configuration file alone proves live traffic health.
  4. Use one manually updated spreadsheet as a live telemetry stream.

Explanation

Correct Answer

B:

Observability connects operational measurements and events to intended network operation. The option uses “Use EDA observability with state-driven monitoring and event correlation” to address “operators need to compare desired fabric behavior with measured network state”. The result must be observed on the affected component.

Incorrect Answers

A:

“Ignore all network events once the initial intent is accepted” targets a different operation from the reported requirement: “operators need to compare desired fabric behavior with measured network state”. Observability connects operational measurements and events to intended network operation. Use the appropriate method: Use EDA observability with state-driven monitoring and event correlation.

C:

“Assume a configuration file alone proves live traffic health” targets a different operation from the reported requirement: “operators need to compare desired fabric behavior with measured network state”. Observability connects operational measurements and events to intended network operation. Use the appropriate method: Use EDA observability with state-driven monitoring and event correlation.

D:

“Use one manually updated spreadsheet as a live telemetry stream” targets a different operation from the reported requirement: “operators need to compare desired fabric behavior with measured network state”. Observability connects operational measurements and events to intended network operation. Use the appropriate method: Use EDA observability with state-driven monitoring and event correlation.

Question 511

In the fictional Ridge-2 east pod, a secondary data hall with tenant isolation requirements, the team reports that a high-volume overlay segment has excessive ARP or ND flooding. The shift handoff must specify a defensible solution and the observable service outcome. Which recommendation is technically justified?

  1. Use a BGP peer AS change to suppress host ARP requests.
  2. Disable MAC/IP advertisement for all active hosts.
  3. Evaluate supported EVPN endpoint information and proxy or suppression features.
  4. Flood every host request across all tenants to increase visibility.

Explanation

Correct Answer

C:

Distributed endpoint information may reduce unnecessary ARP/ND flooding when supported and configured. For Ridge-2, confirm the actual outcome: known remote endpoint resolution succeeds with reduced unnecessary flood traffic.

Incorrect Answers

A:

“Use a BGP peer AS change to suppress host ARP requests” targets a different operation from the reported requirement: “a high-volume overlay segment has excessive ARP or ND flooding”. Distributed endpoint information may reduce unnecessary ARP/ND flooding when supported and configured. Use the appropriate method: Evaluate supported EVPN endpoint information and proxy or suppression features.

B:

“Disable MAC/IP advertisement for all active hosts” targets a different operation from the reported requirement: “a high-volume overlay segment has excessive ARP or ND flooding”. Distributed endpoint information may reduce unnecessary ARP/ND flooding when supported and configured. Use the appropriate method: Evaluate supported EVPN endpoint information and proxy or suppression features.

D:

“Flood every host request across all tenants to increase visibility” targets a different operation from the reported requirement: “a high-volume overlay segment has excessive ARP or ND flooding”. Distributed endpoint information may reduce unnecessary ARP/ND flooding when supported and configured. Use the appropriate method: Evaluate supported EVPN endpoint information and proxy or suppression features.

Question 512

In the fictional Orchard-3 east pod, a lab-to-production migration after a successful canary, the team reports that an EVPN segment needs remote membership discovery for broadcast and unknown traffic. A peer suggested: "Disable VXLAN on the remote nodes to discover flood members" That did not solve the constraint. What should be chosen instead?

  1. Disable VXLAN on the remote nodes to discover flood members.
  2. Use a JSON-RPC TLS profile as the overlay membership signal.
  3. Use Type 5 prefixes alone as broadcast membership advertisement.
  4. Check the EVPN Type 3 inclusive multicast Ethernet tag signaling.

Explanation

Correct Answer

D:

Inclusive multicast routes help identify remote members for segment-wide traffic handling. The option uses “Check the EVPN Type 3 inclusive multicast Ethernet tag signaling” to address “an EVPN segment needs remote membership discovery for broadcast and unknown traffic”. The acceptance test is: the tenant EVPN instance shows expected participating remote VTEPs. For the staged migration, validate the affected path before expansion.

Incorrect Answers

A:

“Disable VXLAN on the remote nodes to discover flood members” targets a different operation from the reported requirement: “an EVPN segment needs remote membership discovery for broadcast and unknown traffic”. Inclusive multicast routes help identify remote members for segment-wide traffic handling. The confirming result is: the tenant EVPN instance shows expected participating remote VTEPs. For the staged migration, validate the affected path before expansion.

B:

“Use a JSON-RPC TLS profile as the overlay membership signal” targets a different operation from the reported requirement: “an EVPN segment needs remote membership discovery for broadcast and unknown traffic”. Inclusive multicast routes help identify remote members for segment-wide traffic handling. The confirming result is: the tenant EVPN instance shows expected participating remote VTEPs. For the staged migration, validate the affected path before expansion.

C:

“Use Type 5 prefixes alone as broadcast membership advertisement” targets a different operation from the reported requirement: “an EVPN segment needs remote membership discovery for broadcast and unknown traffic”. Inclusive multicast routes help identify remote members for segment-wide traffic handling. The confirming result is: the tenant EVPN instance shows expected participating remote VTEPs. For the staged migration, validate the affected path before expansion.

Question 513

In the fictional Atlas-7 west pod, a service recovery task following a partial path outage, the team reports that a manually configured destination prefix has no usable forwarding adjacency. The shift handoff must specify a defensible solution and the observable service outcome. Which recommendation is technically justified?

  1. Reference an appropriate reachable next-hop group for the static route.
  2. Change the device hostname to match the prefix.
  3. Record the route only in syslog without installing it.
  4. Use a MAC move event as a static route next hop.

Explanation

Correct Answer

A:

A static route needs a viable forwarding disposition or next-hop resolution. For Atlas-7, confirm the actual outcome: the static prefix is installed with a valid resolved forwarding next hop.

Incorrect Answers

B:

“Change the device hostname to match the prefix” targets a different operation from the reported requirement: “a manually configured destination prefix has no usable forwarding adjacency”. A static route needs a viable forwarding disposition or next-hop resolution. Use the appropriate method: Reference an appropriate reachable next-hop group for the static route. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

C:

“Record the route only in syslog without installing it” targets a different operation from the reported requirement: “a manually configured destination prefix has no usable forwarding adjacency”. A static route needs a viable forwarding disposition or next-hop resolution. Use the appropriate method: Reference an appropriate reachable next-hop group for the static route. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

D:

“Use a MAC move event as a static route next hop” targets a different operation from the reported requirement: “a manually configured destination prefix has no usable forwarding adjacency”. A static route needs a viable forwarding disposition or next-hop resolution. Use the appropriate method: Reference an appropriate reachable next-hop group for the static route. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

Question 514

In the fictional Atlas-7 east pod, a service recovery task following a partial path outage, the team reports that IPv6 traffic fails while IPv4 routes to the same leaf are healthy. The shift handoff must specify a defensible solution and the observable service outcome. Which recommendation is technically justified?

  1. Assume healthy IPv4 forwarding proves IPv6 route installation.
  2. Inspect the IPv6 address-family routes and next-hop resolution separately.
  3. Move the entire tenant into a Layer 2 hub.
  4. Change an IPv4-only ACL and declare IPv6 restored.

Explanation

Correct Answer

B:

The two IP address families have distinct routes and reachability requirements. For Atlas-7, confirm the actual outcome: the IPv6 destination and next hop are installed in the intended route table.

Incorrect Answers

A:

“Assume healthy IPv4 forwarding proves IPv6 route installation” targets a different operation from the reported requirement: “IPv6 traffic fails while IPv4 routes to the same leaf are healthy”. The two IP address families have distinct routes and reachability requirements. Use the appropriate method: Inspect the IPv6 address-family routes and next-hop resolution separately. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

C:

“Move the entire tenant into a Layer 2 hub” targets a different operation from the reported requirement: “IPv6 traffic fails while IPv4 routes to the same leaf are healthy”. The two IP address families have distinct routes and reachability requirements. Use the appropriate method: Inspect the IPv6 address-family routes and next-hop resolution separately. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

D:

“Change an IPv4-only ACL and declare IPv6 restored” targets a different operation from the reported requirement: “IPv6 traffic fails while IPv4 routes to the same leaf are healthy”. The two IP address families have distinct routes and reachability requirements. Use the appropriate method: Inspect the IPv6 address-family routes and next-hop resolution separately. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

Question 515

In the fictional Atlas-7 west pod, a service recovery task following a partial path outage, the team reports that two remote VTEPs must carry a tenant overlay across routed links. The planned change is "Configure matching VTEP reachability and VXLAN overlay endpoint settings." Which post-change observation best validates the intended technical behavior?

  1. Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior.
  2. Check only that the device hostname is listed in the inventory, without examining vxlan tunnel endpoints behavior.
  3. Verify that the configured endpoints exchange tenant traffic over reachable underlay paths.
  4. Use an unrelated tenant dashboard as proof, without verifying the required vxlan tunnel endpoints condition.

Explanation

Correct Answer

C:

VTEPs encapsulate and decapsulate VXLAN traffic using reachable outer IP endpoints. The option uses “Verify that the configured endpoints exchange tenant traffic over reachable underlay paths” to address “two remote VTEPs must carry a tenant overlay across routed links”. The acceptance test is: the configured endpoints exchange tenant traffic over reachable underlay paths. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

Incorrect Answers

A:

“Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior” targets a different operation from the reported requirement: “two remote VTEPs must carry a tenant overlay across routed links”. VTEPs encapsulate and decapsulate VXLAN traffic using reachable outer IP endpoints. The confirming result is: the configured endpoints exchange tenant traffic over reachable underlay paths. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

B:

“Check only that the device hostname is listed in the inventory, without examining vxlan tunnel endpoints behavior” targets a different operation from the reported requirement: “two remote VTEPs must carry a tenant overlay across routed links”. VTEPs encapsulate and decapsulate VXLAN traffic using reachable outer IP endpoints. The confirming result is: the configured endpoints exchange tenant traffic over reachable underlay paths. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

D:

“Use an unrelated tenant dashboard as proof, without verifying the required vxlan tunnel endpoints condition” targets a different operation from the reported requirement: “two remote VTEPs must carry a tenant overlay across routed links”. VTEPs encapsulate and decapsulate VXLAN traffic using reachable outer IP endpoints. The confirming result is: the configured endpoints exchange tenant traffic over reachable underlay paths. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

Question 516

In the fictional Orchard-3 west pod, a lab-to-production migration after a successful canary, the team reports that traffic must route between tenant subnets while maintaining VRF isolation across VTEPs. An unrelated configuration change is being considered. Which focused remediation best addresses the described problem first?

  1. Require destination-VLAN bridge membership at every intermediary hop.
  2. Use a CLI alias as the inter-subnet forwarding method.
  3. Remove the IP-VRF and route all tenants in a single default instance.
  4. Use a correctly designed symmetric IRB L3 EVPN routing model.

Explanation

Correct Answer

D:

Symmetric IRB uses distributed tenant routing constructs to support inter-subnet traffic over the overlay. Check: inter-subnet flows follow intended IP-VRF routing and VTEP endpoints.

Incorrect Answers

A:

“Require destination-VLAN bridge membership at every intermediary hop” targets a different operation from the reported requirement: “traffic must route between tenant subnets while maintaining VRF isolation across VTEPs”. Symmetric IRB uses distributed tenant routing constructs to support inter-subnet traffic over the overlay. The confirming result is: inter-subnet flows follow intended IP-VRF routing and VTEP endpoints. For the staged migration, validate the affected path before expansion.

B:

“Use a CLI alias as the inter-subnet forwarding method” targets a different operation from the reported requirement: “traffic must route between tenant subnets while maintaining VRF isolation across VTEPs”. Symmetric IRB uses distributed tenant routing constructs to support inter-subnet traffic over the overlay. The confirming result is: inter-subnet flows follow intended IP-VRF routing and VTEP endpoints. For the staged migration, validate the affected path before expansion.

C:

“Remove the IP-VRF and route all tenants in a single default instance” targets a different operation from the reported requirement: “traffic must route between tenant subnets while maintaining VRF isolation across VTEPs”. Symmetric IRB uses distributed tenant routing constructs to support inter-subnet traffic over the overlay. The confirming result is: inter-subnet flows follow intended IP-VRF routing and VTEP endpoints. For the staged migration, validate the affected path before expansion.

Question 517

In the fictional Ridge-2 east pod, a secondary data hall with tenant isolation requirements, the team reports that automation must distinguish configured interface intent from observed link health. The shift handoff must specify a defensible solution and the observable service outcome. Which recommendation is technically justified?

  1. Read the appropriate modeled configuration and state objects separately.
  2. Treat desired admin state as proof of operational signal.
  3. Rely on VLAN names as physical transceiver measurements.
  4. Use an EVPN route target as the source of optics health.

Explanation

Correct Answer

A:

A configured value and an operationally measured value answer different questions. For Ridge-2, confirm the actual outcome: the model shows both intended admin setting and actual operational status.

Incorrect Answers

B:

“Treat desired admin state as proof of operational signal” targets a different operation from the reported requirement: “automation must distinguish configured interface intent from observed link health”. A configured value and an operationally measured value answer different questions. Use the appropriate method: Read the appropriate modeled configuration and state objects separately.

C:

“Rely on VLAN names as physical transceiver measurements” targets a different operation from the reported requirement: “automation must distinguish configured interface intent from observed link health”. A configured value and an operationally measured value answer different questions. Use the appropriate method: Read the appropriate modeled configuration and state objects separately.

D:

“Use an EVPN route target as the source of optics health” targets a different operation from the reported requirement: “automation must distinguish configured interface intent from observed link health”. A configured value and an operationally measured value answer different questions. Use the appropriate method: Read the appropriate modeled configuration and state objects separately.

Question 518

In the fictional Summit-4 east pod, a change-freeze exception for a narrow operational fault, the team reports that the overlay needs to advertise IP routing reachability beyond individual MAC entries. Which engineering action best satisfies this request?

  1. Use only Type 3 membership routes to represent all routed prefixes.
  2. Use appropriate EVPN Type 5 IP prefix advertisements.
  3. Treat an interface ACL entry as an EVPN IP route.
  4. Assign a MAC-VRF bridge flood-list in place of an L3 prefix advertisement.

Explanation

Correct Answer

B:

IP prefix routes advertise Layer 3 destination reachability within EVPN. For Summit-4, confirm the actual outcome: the intended tenant prefix is imported into the right IP-VRF.

Incorrect Answers

A:

“Use only Type 3 membership routes to represent all routed prefixes” targets a different operation from the reported requirement: “the overlay needs to advertise IP routing reachability beyond individual MAC entries”. IP prefix routes advertise Layer 3 destination reachability within EVPN. Use the appropriate method: Use appropriate EVPN Type 5 IP prefix advertisements.

C:

“Treat an interface ACL entry as an EVPN IP route” targets a different operation from the reported requirement: “the overlay needs to advertise IP routing reachability beyond individual MAC entries”. IP prefix routes advertise Layer 3 destination reachability within EVPN. Use the appropriate method: Use appropriate EVPN Type 5 IP prefix advertisements.

D:

“Assign a MAC-VRF bridge flood-list in place of an L3 prefix advertisement” targets a different operation from the reported requirement: “the overlay needs to advertise IP routing reachability beyond individual MAC entries”. IP prefix routes advertise Layer 3 destination reachability within EVPN. Use the appropriate method: Use appropriate EVPN Type 5 IP prefix advertisements.

Question 519

In the fictional Atlas-7 east pod, a service recovery task following a partial path outage, the team reports that separate customers must not share unintended bridge or routing tables. Which engineering action best satisfies this request?

  1. Disable all segmentation and rely on hostnames.
  2. Put every tenant into the default network instance without controls.
  3. Associate tenant segments with appropriate MAC-VRFs and IP-VRFs.
  4. Assign the same L2 broadcast domain to every customer.

Explanation

Correct Answer

C:

Distinct virtual routing and bridging instances provide explicit tenant forwarding boundaries. For Atlas-7, confirm the actual outcome: tenant routes and MACs occur only in the intended network instances.

Incorrect Answers

A:

“Disable all segmentation and rely on hostnames” targets a different operation from the reported requirement: “separate customers must not share unintended bridge or routing tables”. Distinct virtual routing and bridging instances provide explicit tenant forwarding boundaries. Use the appropriate method: Associate tenant segments with appropriate MAC-VRFs and IP-VRFs. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

B:

“Put every tenant into the default network instance without controls” targets a different operation from the reported requirement: “separate customers must not share unintended bridge or routing tables”. Distinct virtual routing and bridging instances provide explicit tenant forwarding boundaries. Use the appropriate method: Associate tenant segments with appropriate MAC-VRFs and IP-VRFs. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

D:

“Assign the same L2 broadcast domain to every customer” targets a different operation from the reported requirement: “separate customers must not share unintended bridge or routing tables”. Distinct virtual routing and bridging instances provide explicit tenant forwarding boundaries. Use the appropriate method: Associate tenant segments with appropriate MAC-VRFs and IP-VRFs. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

Question 520

In the fictional Ridge-2 west pod, a secondary data hall with tenant isolation requirements, the team reports that the monitoring platform is flooded with low-priority diagnostic records. The planned change is "Tune supported logging levels and destinations while retaining important events." Which post-change observation best validates the intended technical behavior?

  1. Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior.
  2. Check only that the device hostname is listed in the inventory, without examining log severity selection behavior.
  3. Use an unrelated tenant dashboard as proof, without verifying the required log severity selection condition.
  4. Verify that critical events remain visible while routine noise is reduced.

Explanation

Correct Answer

D:

Severity and destination selection reduce noise without removing necessary fault evidence. The option uses “Verify that critical events remain visible while routine noise is reduced” to address “the monitoring platform is flooded with low-priority diagnostic records”. The acceptance test is: critical events remain visible while routine noise is reduced.

Incorrect Answers

A:

“Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior” targets a different operation from the reported requirement: “the monitoring platform is flooded with low-priority diagnostic records”. Severity and destination selection reduce noise without removing necessary fault evidence. The confirming result is: critical events remain visible while routine noise is reduced.

B:

“Check only that the device hostname is listed in the inventory, without examining log severity selection behavior” targets a different operation from the reported requirement: “the monitoring platform is flooded with low-priority diagnostic records”. Severity and destination selection reduce noise without removing necessary fault evidence. The confirming result is: critical events remain visible while routine noise is reduced.

C:

“Use an unrelated tenant dashboard as proof, without verifying the required log severity selection condition” targets a different operation from the reported requirement: “the monitoring platform is flooded with low-priority diagnostic records”. Severity and destination selection reduce noise without removing necessary fault evidence. The confirming result is: critical events remain visible while routine noise is reduced.

Nokia Data Center Fabric Fundamentals (4A0-D01) Practice Tests