mcAfee Secure Website
exam =5
exam =6

Exam Code: 4A0-D01

Exam Name: Nokia Data Center Fabric Fundamentals

Certification Provider: Nokia

Nokia 4A0-D01 Questions & Answers

Reliable & Actual Study Materials for 4A0-D01 Exam Success

61 Questions & Answers with Testing Engine

"4A0-D01: Nokia Data Center Fabric Fundamentals" Testing Engine covers all the knowledge points of the real Nokia 4A0-D01 exam.

The latest actual 4A0-D01 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at 4A0-D01 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Nokia Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Nokia 4A0-D01 Practice Test 51

Question 500

In the fictional Summit-4 west pod, a change-freeze exception for a narrow operational fault, the team reports that a VXLAN endpoint sourced from a loopback address is unreachable. The planned change is "Ensure the loopback endpoint address is advertised and routed in the underlay." Which post-change observation best validates the intended technical behavior?

  1. Use an unrelated tenant dashboard as proof, without verifying the required loopback endpoint reachability condition.
  2. Check only that the device hostname is listed in the inventory, without examining loopback endpoint reachability behavior.
  3. Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior.
  4. Verify that the remote endpoint loopback resolves through valid underlay routes.

Explanation

Correct Answer

D:

Loopback-based tunnel endpoints require routed transport reachability. The option uses “Verify that the remote endpoint loopback resolves through valid underlay routes” to address “a VXLAN endpoint sourced from a loopback address is unreachable”. The acceptance test is: the remote endpoint loopback resolves through valid underlay routes.

Incorrect Answers

A:

“Use an unrelated tenant dashboard as proof, without verifying the required loopback endpoint reachability condition” targets a different operation from the reported requirement: “a VXLAN endpoint sourced from a loopback address is unreachable”. Loopback-based tunnel endpoints require routed transport reachability. The confirming result is: the remote endpoint loopback resolves through valid underlay routes.

B:

“Check only that the device hostname is listed in the inventory, without examining loopback endpoint reachability behavior” targets a different operation from the reported requirement: “a VXLAN endpoint sourced from a loopback address is unreachable”. Loopback-based tunnel endpoints require routed transport reachability. The confirming result is: the remote endpoint loopback resolves through valid underlay routes.

C:

“Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior” targets a different operation from the reported requirement: “a VXLAN endpoint sourced from a loopback address is unreachable”. Loopback-based tunnel endpoints require routed transport reachability. The confirming result is: the remote endpoint loopback resolves through valid underlay routes.

Question 501

In the fictional Harbor-1 east pod, a staged top-of-rack rollout with a bounded maintenance window, the team reports that operators need consistent multi-node fabric changes and state reconciliation. The planned change is "Use a supported fabric automation platform for coordinated configuration and visibility." Which post-change observation best validates the intended technical behavior?

  1. Verify that intended configurations and actual fabric inventory can be reconciled.
  2. Use an unrelated tenant dashboard as proof, without verifying the required fabric orchestration condition.
  3. Check only that the device hostname is listed in the inventory, without examining fabric orchestration behavior.
  4. Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior.

Explanation

Correct Answer

A:

Coordinated tooling can compare desired fabric intent with deployed network state. The option uses “Verify that intended configurations and actual fabric inventory can be reconciled” to address “operators need consistent multi-node fabric changes and state reconciliation”. The acceptance test is: intended configurations and actual fabric inventory can be reconciled.

Incorrect Answers

B:

“Use an unrelated tenant dashboard as proof, without verifying the required fabric orchestration condition” targets a different operation from the reported requirement: “operators need consistent multi-node fabric changes and state reconciliation”. Coordinated tooling can compare desired fabric intent with deployed network state. The confirming result is: intended configurations and actual fabric inventory can be reconciled.

C:

“Check only that the device hostname is listed in the inventory, without examining fabric orchestration behavior” targets a different operation from the reported requirement: “operators need consistent multi-node fabric changes and state reconciliation”. Coordinated tooling can compare desired fabric intent with deployed network state. The confirming result is: intended configurations and actual fabric inventory can be reconciled.

D:

“Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior” targets a different operation from the reported requirement: “operators need consistent multi-node fabric changes and state reconciliation”. Coordinated tooling can compare desired fabric intent with deployed network state. The confirming result is: intended configurations and actual fabric inventory can be reconciled.

Question 502

In the fictional Delta-6 west pod, a controller-managed extension requiring reproducible evidence, the team reports that the intended fabric topology differs from deployed configuration on several nodes. The planned change is "Use EDA fabric-intent workflows to reconcile desired fabric configuration." Which post-change observation best validates the intended technical behavior?

  1. Use an unrelated tenant dashboard as proof, without verifying the required fabric intent automation condition.
  2. Verify that deployed fabric resources converge toward the declared and validated intent.
  3. Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior.
  4. Check only that the device hostname is listed in the inventory, without examining fabric intent automation behavior.

Explanation

Correct Answer

B:

Intent-based automation represents desired outcomes and coordinates enforcement. The option uses “Verify that deployed fabric resources converge toward the declared and validated intent” to address “the intended fabric topology differs from deployed configuration on several nodes”. The acceptance test is: deployed fabric resources converge toward the declared and validated intent.

Incorrect Answers

A:

“Use an unrelated tenant dashboard as proof, without verifying the required fabric intent automation condition” targets a different operation from the reported requirement: “the intended fabric topology differs from deployed configuration on several nodes”. Intent-based automation represents desired outcomes and coordinates enforcement. The confirming result is: deployed fabric resources converge toward the declared and validated intent.

C:

“Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior” targets a different operation from the reported requirement: “the intended fabric topology differs from deployed configuration on several nodes”. Intent-based automation represents desired outcomes and coordinates enforcement. The confirming result is: deployed fabric resources converge toward the declared and validated intent.

D:

“Check only that the device hostname is listed in the inventory, without examining fabric intent automation behavior” targets a different operation from the reported requirement: “the intended fabric topology differs from deployed configuration on several nodes”. Intent-based automation represents desired outcomes and coordinates enforcement. The confirming result is: deployed fabric resources converge toward the declared and validated intent.

Question 503

In the fictional Canyon-5 east pod, a fabric operations audit prior to tenant onboarding, the team reports that remote tenant hosts in one subnet need bridged reachability over VXLAN. The shift handoff must specify a defensible solution and the observable service outcome. Which recommendation is technically justified?

  1. Use only an underlay default route without an L2 overlay service.
  2. Put tenant endpoints solely in a remote unconnected IP-VRF.
  3. Build the MAC-VRF based L2 EVPN-VXLAN service with consistent identifiers.
  4. Require all hosts to connect to the same physical access switch.

Explanation

Correct Answer

C:

L2 EVPN couples tenant bridging with distributed MAC reachability and VXLAN transport. For Canyon-5, confirm the actual outcome: local and remote tenant MAC learning is correct with no unplanned cross-tenant leakage.

Incorrect Answers

A:

“Use only an underlay default route without an L2 overlay service” targets a different operation from the reported requirement: “remote tenant hosts in one subnet need bridged reachability over VXLAN”. L2 EVPN couples tenant bridging with distributed MAC reachability and VXLAN transport. Use the appropriate method: Build the MAC-VRF based L2 EVPN-VXLAN service with consistent identifiers. Before onboarding, test that the intended fabric state exists.

B:

“Put tenant endpoints solely in a remote unconnected IP-VRF” targets a different operation from the reported requirement: “remote tenant hosts in one subnet need bridged reachability over VXLAN”. L2 EVPN couples tenant bridging with distributed MAC reachability and VXLAN transport. Use the appropriate method: Build the MAC-VRF based L2 EVPN-VXLAN service with consistent identifiers. Before onboarding, test that the intended fabric state exists.

D:

“Require all hosts to connect to the same physical access switch” targets a different operation from the reported requirement: “remote tenant hosts in one subnet need bridged reachability over VXLAN”. L2 EVPN couples tenant bridging with distributed MAC reachability and VXLAN transport. Use the appropriate method: Build the MAC-VRF based L2 EVPN-VXLAN service with consistent identifiers. Before onboarding, test that the intended fabric state exists.

Question 504

In the fictional North-10 east pod, a commissioning exercise under the on-call team, the team reports that an architecture review asks how EDA's controller platform is operated. The planned change is "Describe EDA's Kubernetes-oriented orchestration architecture." Which post-change observation best validates the intended technical behavior?

  1. Check only that the device hostname is listed in the inventory, without examining kubernetes relation behavior.
  2. Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior.
  3. Use an unrelated tenant dashboard as proof, without verifying the required kubernetes relation condition.
  4. Verify that the documented controller workloads and intent resources are observable on the orchestration platform.

Explanation

Correct Answer

D:

EDA's platform orchestration concerns managed applications and controller components, not packet tunneling. The option uses “Verify that the documented controller workloads and intent resources are observable on the orchestration platform” to address “an architecture review asks how EDA's controller platform is operated”. The acceptance test is: the documented controller workloads and intent resources are observable on the orchestration platform. Before onboarding, test that the intended fabric state exists.

Incorrect Answers

A:

“Check only that the device hostname is listed in the inventory, without examining kubernetes relation behavior” targets a different operation from the reported requirement: “an architecture review asks how EDA's controller platform is operated”. EDA's platform orchestration concerns managed applications and controller components, not packet tunneling. The confirming result is: the documented controller workloads and intent resources are observable on the orchestration platform. Before onboarding, test that the intended fabric state exists.

B:

“Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior” targets a different operation from the reported requirement: “an architecture review asks how EDA's controller platform is operated”. EDA's platform orchestration concerns managed applications and controller components, not packet tunneling. The confirming result is: the documented controller workloads and intent resources are observable on the orchestration platform. Before onboarding, test that the intended fabric state exists.

C:

“Use an unrelated tenant dashboard as proof, without verifying the required kubernetes relation condition” targets a different operation from the reported requirement: “an architecture review asks how EDA's controller platform is operated”. EDA's platform orchestration concerns managed applications and controller components, not packet tunneling. The confirming result is: the documented controller workloads and intent resources are observable on the orchestration platform. Before onboarding, test that the intended fabric state exists.

Question 505

In the fictional Ridge-2 west pod, a secondary data hall with tenant isolation requirements, the team reports that remote tenant hosts in one subnet need bridged reachability over VXLAN. The shift handoff must specify a defensible solution and the observable service outcome. Which recommendation is technically justified?

  1. Build the MAC-VRF based L2 EVPN-VXLAN service with consistent identifiers.
  2. Put tenant endpoints solely in a remote unconnected IP-VRF.
  3. Use only an underlay default route without an L2 overlay service.
  4. Require all hosts to connect to the same physical access switch.

Explanation

Correct Answer

A:

L2 EVPN couples tenant bridging with distributed MAC reachability and VXLAN transport. For Ridge-2, confirm the actual outcome: local and remote tenant MAC learning is correct with no unplanned cross-tenant leakage.

Incorrect Answers

B:

“Put tenant endpoints solely in a remote unconnected IP-VRF” targets a different operation from the reported requirement: “remote tenant hosts in one subnet need bridged reachability over VXLAN”. L2 EVPN couples tenant bridging with distributed MAC reachability and VXLAN transport. Use the appropriate method: Build the MAC-VRF based L2 EVPN-VXLAN service with consistent identifiers.

C:

“Use only an underlay default route without an L2 overlay service” targets a different operation from the reported requirement: “remote tenant hosts in one subnet need bridged reachability over VXLAN”. L2 EVPN couples tenant bridging with distributed MAC reachability and VXLAN transport. Use the appropriate method: Build the MAC-VRF based L2 EVPN-VXLAN service with consistent identifiers.

D:

“Require all hosts to connect to the same physical access switch” targets a different operation from the reported requirement: “remote tenant hosts in one subnet need bridged reachability over VXLAN”. L2 EVPN couples tenant bridging with distributed MAC reachability and VXLAN transport. Use the appropriate method: Build the MAC-VRF based L2 EVPN-VXLAN service with consistent identifiers.

Question 506

In the fictional Delta-6 west pod, a controller-managed extension requiring reproducible evidence, the team reports that an automation system needs structured streaming device state. An unrelated configuration change is being considered. Which focused remediation best addresses the described problem first?

  1. Run a human terminal screenshot macro as the only telemetry feed.
  2. Use a supported gNMI subscription or retrieval interface.
  3. Encode syslog output as a replacement for interface state models.
  4. Infer device counters from route-target strings.

Explanation

Correct Answer

B:

GNMI provides a model-driven management path for configuration and telemetry. For Delta-6, confirm the actual outcome: the subscribed or retrieved state path returns the intended operational values.

Incorrect Answers

A:

“Run a human terminal screenshot macro as the only telemetry feed” targets a different operation from the reported requirement: “an automation system needs structured streaming device state”. GNMI provides a model-driven management path for configuration and telemetry. Use the appropriate method: Use a supported gNMI subscription or retrieval interface.

C:

“Encode syslog output as a replacement for interface state models” targets a different operation from the reported requirement: “an automation system needs structured streaming device state”. GNMI provides a model-driven management path for configuration and telemetry. Use the appropriate method: Use a supported gNMI subscription or retrieval interface.

D:

“Infer device counters from route-target strings” targets a different operation from the reported requirement: “an automation system needs structured streaming device state”. GNMI provides a model-driven management path for configuration and telemetry. Use the appropriate method: Use a supported gNMI subscription or retrieval interface.

Question 507

In the fictional Delta-6 east pod, a controller-managed extension requiring reproducible evidence, the team reports that a controller needs to advertise remote tenant MAC and IP reachability. An unrelated configuration change is being considered. Which focused remediation best addresses the described problem first?

  1. Use syslog messages to update remote forwarding entries.
  2. Treat VLAN tags as a global routing protocol.
  3. Use the BGP EVPN control plane for endpoint reachability advertisements.
  4. Use interface CRC counters to distribute remote MAC locations.

Explanation

Correct Answer

C:

EVPN distributes overlay reachability information separately from VXLAN data-plane transport. The option uses “Use the BGP EVPN control plane for endpoint reachability advertisements” to address “a controller needs to advertise remote tenant MAC and IP reachability”. The result must be observed on the affected component.

Incorrect Answers

A:

“Use syslog messages to update remote forwarding entries” targets a different operation from the reported requirement: “a controller needs to advertise remote tenant MAC and IP reachability”. EVPN distributes overlay reachability information separately from VXLAN data-plane transport. Use the appropriate method: Use the BGP EVPN control plane for endpoint reachability advertisements.

B:

“Treat VLAN tags as a global routing protocol” targets a different operation from the reported requirement: “a controller needs to advertise remote tenant MAC and IP reachability”. EVPN distributes overlay reachability information separately from VXLAN data-plane transport. Use the appropriate method: Use the BGP EVPN control plane for endpoint reachability advertisements.

D:

“Use interface CRC counters to distribute remote MAC locations” targets a different operation from the reported requirement: “a controller needs to advertise remote tenant MAC and IP reachability”. EVPN distributes overlay reachability information separately from VXLAN data-plane transport. Use the appropriate method: Use the BGP EVPN control plane for endpoint reachability advertisements.

Question 508

In the fictional Delta-6 east pod, a controller-managed extension requiring reproducible evidence, the team reports that an underlay path needs rapid failure signaling between configured peers. Which engineering action best satisfies this request?

  1. Turn off BGP neighbor transport to improve liveliness.
  2. Rely only on slow daily interface inventory exports.
  3. Use EVPN route distinguishers as physical keepalive packets.
  4. Configure and verify a supported BFD session for the relevant adjacency.

Explanation

Correct Answer

D:

BFD supplies protocol-independent rapid path liveliness detection when correctly bound to peers. For Delta-6, confirm the actual outcome: the BFD session is up and its failure state correlates with the intended adjacency.

Incorrect Answers

A:

“Turn off BGP neighbor transport to improve liveliness” targets a different operation from the reported requirement: “an underlay path needs rapid failure signaling between configured peers”. BFD supplies protocol-independent rapid path liveliness detection when correctly bound to peers. Use the appropriate method: Configure and verify a supported BFD session for the relevant adjacency.

B:

“Rely only on slow daily interface inventory exports” targets a different operation from the reported requirement: “an underlay path needs rapid failure signaling between configured peers”. BFD supplies protocol-independent rapid path liveliness detection when correctly bound to peers. Use the appropriate method: Configure and verify a supported BFD session for the relevant adjacency.

C:

“Use EVPN route distinguishers as physical keepalive packets” targets a different operation from the reported requirement: “an underlay path needs rapid failure signaling between configured peers”. BFD supplies protocol-independent rapid path liveliness detection when correctly bound to peers. Use the appropriate method: Configure and verify a supported BFD session for the relevant adjacency.

Question 509

In the fictional Metro-8 west pod, a multi-tenant fabric undergoing documented validation, the team reports that operations need repeatable tenant service deployment across the fabric. Which engineering action best satisfies this request?

  1. Use EDA service-intent definitions with controlled reconciliation.
  2. Use syslog text as the only authoritative tenant service configuration.
  3. Change one access VLAN manually without representing service dependencies.
  4. Turn off remote EVPN route exchange and declare the service deployed.

Explanation

Correct Answer

A:

Service intent captures desired network service state across participating resources. The option uses “Use EDA service-intent definitions with controlled reconciliation” to address “operations need repeatable tenant service deployment across the fabric”. The result must be observed on the affected component. Observe the relevant forwarding/control-plane behavior under the approved test.

Incorrect Answers

B:

“Use syslog text as the only authoritative tenant service configuration” targets a different operation from the reported requirement: “operations need repeatable tenant service deployment across the fabric”. Service intent captures desired network service state across participating resources. Use the appropriate method: Use EDA service-intent definitions with controlled reconciliation. Observe the relevant forwarding/control-plane behavior under the approved test.

C:

“Change one access VLAN manually without representing service dependencies” targets a different operation from the reported requirement: “operations need repeatable tenant service deployment across the fabric”. Service intent captures desired network service state across participating resources. Use the appropriate method: Use EDA service-intent definitions with controlled reconciliation. Observe the relevant forwarding/control-plane behavior under the approved test.

D:

“Turn off remote EVPN route exchange and declare the service deployed” targets a different operation from the reported requirement: “operations need repeatable tenant service deployment across the fabric”. Service intent captures desired network service state across participating resources. Use the appropriate method: Use EDA service-intent definitions with controlled reconciliation. Observe the relevant forwarding/control-plane behavior under the approved test.

Question 510

In the fictional Ridge-2 east pod, a secondary data hall with tenant isolation requirements, the team reports that operators need to compare desired fabric behavior with measured network state. A peer suggested: "Use one manually updated spreadsheet as a live telemetry stream" That did not solve the constraint. What should be chosen instead?

  1. Ignore all network events once the initial intent is accepted.
  2. Use EDA observability with state-driven monitoring and event correlation.
  3. Assume a configuration file alone proves live traffic health.
  4. Use one manually updated spreadsheet as a live telemetry stream.

Explanation

Correct Answer

B:

Observability connects operational measurements and events to intended network operation. The option uses “Use EDA observability with state-driven monitoring and event correlation” to address “operators need to compare desired fabric behavior with measured network state”. The result must be observed on the affected component.

Incorrect Answers

A:

“Ignore all network events once the initial intent is accepted” targets a different operation from the reported requirement: “operators need to compare desired fabric behavior with measured network state”. Observability connects operational measurements and events to intended network operation. Use the appropriate method: Use EDA observability with state-driven monitoring and event correlation.

C:

“Assume a configuration file alone proves live traffic health” targets a different operation from the reported requirement: “operators need to compare desired fabric behavior with measured network state”. Observability connects operational measurements and events to intended network operation. Use the appropriate method: Use EDA observability with state-driven monitoring and event correlation.

D:

“Use one manually updated spreadsheet as a live telemetry stream” targets a different operation from the reported requirement: “operators need to compare desired fabric behavior with measured network state”. Observability connects operational measurements and events to intended network operation. Use the appropriate method: Use EDA observability with state-driven monitoring and event correlation.

Nokia Data Center Fabric Fundamentals (4A0-D01) Practice Tests