mcAfee Secure Website
exam =5
exam =6

Exam Code: 4A0-D01

Exam Name: Nokia Data Center Fabric Fundamentals

Certification Provider: Nokia

Nokia 4A0-D01 Questions & Answers

Reliable & Actual Study Materials for 4A0-D01 Exam Success

61 Questions & Answers with Testing Engine

"4A0-D01: Nokia Data Center Fabric Fundamentals" Testing Engine covers all the knowledge points of the real Nokia 4A0-D01 exam.

The latest actual 4A0-D01 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at 4A0-D01 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Nokia Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Nokia 4A0-D01 Practice Test 50

Question 490

In the fictional Harbor-1 east pod, a staged top-of-rack rollout with a bounded maintenance window, the team reports that a remote tenant host moves to another leaf and reachability must be updated. A peer suggested: "Use system ACL counters to advertise host movement" That did not solve the constraint. What should be chosen instead?

  1. Use Type 5 IP-prefix routes as the only source of individual MAC location.
  2. Examine BGP EVPN Type 2 MAC/IP reachability advertisements.
  3. Treat the physical port description as a BGP EVPN update.
  4. Use system ACL counters to advertise host movement.

Explanation

Correct Answer

B:

EVPN MAC/IP advertisements carry endpoint reachability information for the L2 overlay. For Harbor-1, confirm the actual outcome: the active remote host MAC/IP is associated with the expected VTEP.

Incorrect Answers

A:

“Use Type 5 IP-prefix routes as the only source of individual MAC location” targets a different operation from the reported requirement: “a remote tenant host moves to another leaf and reachability must be updated”. EVPN MAC/IP advertisements carry endpoint reachability information for the L2 overlay. Use the appropriate method: Examine BGP EVPN Type 2 MAC/IP reachability advertisements.

C:

“Treat the physical port description as a BGP EVPN update” targets a different operation from the reported requirement: “a remote tenant host moves to another leaf and reachability must be updated”. EVPN MAC/IP advertisements carry endpoint reachability information for the L2 overlay. Use the appropriate method: Examine BGP EVPN Type 2 MAC/IP reachability advertisements.

D:

“Use system ACL counters to advertise host movement” targets a different operation from the reported requirement: “a remote tenant host moves to another leaf and reachability must be updated”. EVPN MAC/IP advertisements carry endpoint reachability information for the L2 overlay. Use the appropriate method: Examine BGP EVPN Type 2 MAC/IP reachability advertisements.

Question 491

In the fictional Canyon-5 west pod, a fabric operations audit prior to tenant onboarding, the team reports that an automation system needs structured streaming device state. The planned change is "Use a supported gNMI subscription or retrieval interface." Which post-change observation best validates the intended technical behavior?

  1. Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior.
  2. Use an unrelated tenant dashboard as proof, without verifying the required programmatic telemetry condition.
  3. Verify that the subscribed or retrieved state path returns the intended operational values.
  4. Check only that the device hostname is listed in the inventory, without examining programmatic telemetry behavior.

Explanation

Correct Answer

C:

GNMI provides a model-driven management path for configuration and telemetry. The option uses “Verify that the subscribed or retrieved state path returns the intended operational values” to address “an automation system needs structured streaming device state”. The acceptance test is: the subscribed or retrieved state path returns the intended operational values. Before onboarding, test that the intended fabric state exists.

Incorrect Answers

A:

“Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior” targets a different operation from the reported requirement: “an automation system needs structured streaming device state”. GNMI provides a model-driven management path for configuration and telemetry. The confirming result is: the subscribed or retrieved state path returns the intended operational values. Before onboarding, test that the intended fabric state exists.

B:

“Use an unrelated tenant dashboard as proof, without verifying the required programmatic telemetry condition” targets a different operation from the reported requirement: “an automation system needs structured streaming device state”. GNMI provides a model-driven management path for configuration and telemetry. The confirming result is: the subscribed or retrieved state path returns the intended operational values. Before onboarding, test that the intended fabric state exists.

D:

“Check only that the device hostname is listed in the inventory, without examining programmatic telemetry behavior” targets a different operation from the reported requirement: “an automation system needs structured streaming device state”. GNMI provides a model-driven management path for configuration and telemetry. The confirming result is: the subscribed or retrieved state path returns the intended operational values. Before onboarding, test that the intended fabric state exists.

Question 492

In the fictional Harbor-1 east pod, a staged top-of-rack rollout with a bounded maintenance window, the team reports that automation must distinguish configured interface intent from observed link health. An unrelated configuration change is being considered. Which focused remediation best addresses the described problem first?

  1. Rely on VLAN names as physical transceiver measurements.
  2. Treat desired admin state as proof of operational signal.
  3. Use an EVPN route target as the source of optics health.
  4. Read the appropriate modeled configuration and state objects separately.

Explanation

Correct Answer

D:

A configured value and an operationally measured value answer different questions. For Harbor-1, confirm the actual outcome: the model shows both intended admin setting and actual operational status.

Incorrect Answers

A:

“Rely on VLAN names as physical transceiver measurements” targets a different operation from the reported requirement: “automation must distinguish configured interface intent from observed link health”. A configured value and an operationally measured value answer different questions. Use the appropriate method: Read the appropriate modeled configuration and state objects separately.

B:

“Treat desired admin state as proof of operational signal” targets a different operation from the reported requirement: “automation must distinguish configured interface intent from observed link health”. A configured value and an operationally measured value answer different questions. Use the appropriate method: Read the appropriate modeled configuration and state objects separately.

C:

“Use an EVPN route target as the source of optics health” targets a different operation from the reported requirement: “automation must distinguish configured interface intent from observed link health”. A configured value and an operationally measured value answer different questions. Use the appropriate method: Read the appropriate modeled configuration and state objects separately.

Question 493

In the fictional North-10 east pod, a commissioning exercise under the on-call team, the team reports that operations need repeatable tenant service deployment across the fabric. A peer suggested: "Use syslog text as the only authoritative tenant service configuration" That did not solve the constraint. What should be chosen instead?

  1. Use EDA service-intent definitions with controlled reconciliation.
  2. Change one access VLAN manually without representing service dependencies.
  3. Turn off remote EVPN route exchange and declare the service deployed.
  4. Use syslog text as the only authoritative tenant service configuration.

Explanation

Correct Answer

A:

Service intent captures desired network service state across participating resources. For North-10, confirm the actual outcome: the declared service maps to the intended attachments and network instances.

Incorrect Answers

B:

“Change one access VLAN manually without representing service dependencies” targets a different operation from the reported requirement: “operations need repeatable tenant service deployment across the fabric”. Service intent captures desired network service state across participating resources. Use the appropriate method: Use EDA service-intent definitions with controlled reconciliation. Before onboarding, test that the intended fabric state exists.

C:

“Turn off remote EVPN route exchange and declare the service deployed” targets a different operation from the reported requirement: “operations need repeatable tenant service deployment across the fabric”. Service intent captures desired network service state across participating resources. Use the appropriate method: Use EDA service-intent definitions with controlled reconciliation. Before onboarding, test that the intended fabric state exists.

D:

“Use syslog text as the only authoritative tenant service configuration” targets a different operation from the reported requirement: “operations need repeatable tenant service deployment across the fabric”. Service intent captures desired network service state across participating resources. Use the appropriate method: Use EDA service-intent definitions with controlled reconciliation. Before onboarding, test that the intended fabric state exists.

Question 494

In the fictional Orchard-3 west pod, a lab-to-production migration after a successful canary, the team reports that an on-call engineer needs a compact human-readable comparison of many interfaces. A peer suggested: "Force binary packet capture as the only display format" That did not solve the constraint. What should be chosen instead?

  1. Export full model trees when a focused overview is needed.
  2. Use the CLI table presentation where supported.
  3. Force binary packet capture as the only display format.
  4. Disable interface statistics to shorten every command.

Explanation

Correct Answer

B:

Table presentation makes repeated fields easier to compare interactively. The option uses “Use the CLI table presentation where supported” to address “an on-call engineer needs a compact human-readable comparison of many interfaces”. The acceptance test is: the displayed table contains the intended interfaces and columns. For the staged migration, validate the affected path before expansion.

Incorrect Answers

A:

“Export full model trees when a focused overview is needed” targets a different operation from the reported requirement: “an on-call engineer needs a compact human-readable comparison of many interfaces”. Table presentation makes repeated fields easier to compare interactively. The confirming result is: the displayed table contains the intended interfaces and columns. For the staged migration, validate the affected path before expansion.

C:

“Force binary packet capture as the only display format” targets a different operation from the reported requirement: “an on-call engineer needs a compact human-readable comparison of many interfaces”. Table presentation makes repeated fields easier to compare interactively. The confirming result is: the displayed table contains the intended interfaces and columns. For the staged migration, validate the affected path before expansion.

D:

“Disable interface statistics to shorten every command” targets a different operation from the reported requirement: “an on-call engineer needs a compact human-readable comparison of many interfaces”. Table presentation makes repeated fields easier to compare interactively. The confirming result is: the displayed table contains the intended interfaces and columns. For the staged migration, validate the affected path before expansion.

Question 495

In the fictional North-10 west pod, a commissioning exercise under the on-call team, the team reports that a leaf port must carry separate tagged tenant attachment networks. A peer suggested: "Put all tenants into one untagged subinterface without segmentation" That did not solve the constraint. What should be chosen instead?

  1. Use a BGP local preference as a VLAN identifier.
  2. Configure a VXLAN VNI as a physical Ethernet speed.
  3. Define matching VLAN-tagged subinterfaces with the correct encapsulation.
  4. Put all tenants into one untagged subinterface without segmentation.

Explanation

Correct Answer

C:

Subinterfaces permit explicit per-tag service attachment on an interface. The option uses “Define matching VLAN-tagged subinterfaces with the correct encapsulation” to address “a leaf port must carry separate tagged tenant attachment networks”. The result must be observed on the affected component. Before onboarding, test that the intended fabric state exists.

Incorrect Answers

A:

“Use a BGP local preference as a VLAN identifier” targets a different operation from the reported requirement: “a leaf port must carry separate tagged tenant attachment networks”. Subinterfaces permit explicit per-tag service attachment on an interface. Use the appropriate method: Define matching VLAN-tagged subinterfaces with the correct encapsulation. Before onboarding, test that the intended fabric state exists.

B:

“Configure a VXLAN VNI as a physical Ethernet speed” targets a different operation from the reported requirement: “a leaf port must carry separate tagged tenant attachment networks”. Subinterfaces permit explicit per-tag service attachment on an interface. Use the appropriate method: Define matching VLAN-tagged subinterfaces with the correct encapsulation. Before onboarding, test that the intended fabric state exists.

D:

“Put all tenants into one untagged subinterface without segmentation” targets a different operation from the reported requirement: “a leaf port must carry separate tagged tenant attachment networks”. Subinterfaces permit explicit per-tag service attachment on an interface. Use the appropriate method: Define matching VLAN-tagged subinterfaces with the correct encapsulation. Before onboarding, test that the intended fabric state exists.

Question 496

In the fictional Orchard-3 west pod, a lab-to-production migration after a successful canary, the team reports that an EVPN route is visible but is not imported into its intended tenant instance. A peer suggested: "Change the physical switchport speed to import EVPN VPN routes" That did not solve the constraint. What should be chosen instead?

  1. Use the route distinguisher as a substitute for all import policy.
  2. Change the physical switchport speed to import EVPN VPN routes.
  3. Raise log severity to turn route import on.
  4. Verify the route-target import and export policy for the target instance.

Explanation

Correct Answer

D:

Route targets control import/export membership for VPN routing information. The option uses “Verify the route-target import and export policy for the target instance” to address “an EVPN route is visible but is not imported into its intended tenant instance”. The acceptance test is: the intended routes are imported only by instances matching the designated targets. For the staged migration, validate the affected path before expansion.

Incorrect Answers

A:

“Use the route distinguisher as a substitute for all import policy” targets a different operation from the reported requirement: “an EVPN route is visible but is not imported into its intended tenant instance”. Route targets control import/export membership for VPN routing information. The confirming result is: the intended routes are imported only by instances matching the designated targets. For the staged migration, validate the affected path before expansion.

B:

“Change the physical switchport speed to import EVPN VPN routes” targets a different operation from the reported requirement: “an EVPN route is visible but is not imported into its intended tenant instance”. Route targets control import/export membership for VPN routing information. The confirming result is: the intended routes are imported only by instances matching the designated targets. For the staged migration, validate the affected path before expansion.

C:

“Raise log severity to turn route import on” targets a different operation from the reported requirement: “an EVPN route is visible but is not imported into its intended tenant instance”. Route targets control import/export membership for VPN routing information. The confirming result is: the intended routes are imported only by instances matching the designated targets. For the staged migration, validate the affected path before expansion.

Question 497

In the fictional North-10 east pod, a commissioning exercise under the on-call team, the team reports that the fabric must limit large shared Layer 2 failure domains. An unrelated configuration change is being considered. Which focused remediation best addresses the described problem first?

  1. Use Layer 3 routed links between leaf and spine switches.
  2. Stretch one unbroken VLAN over every underlay link.
  3. Rely on an overlay tunnel without any IP routing underneath.
  4. Build the fabric from a single shared collision domain.

Explanation

Correct Answer

A:

A routed underlay confines broadcast domains and supplies IP reachability for the overlay. For North-10, confirm the actual outcome: routed underlay next hops reach all required VTEPs.

Incorrect Answers

B:

“Stretch one unbroken VLAN over every underlay link” targets a different operation from the reported requirement: “the fabric must limit large shared Layer 2 failure domains”. A routed underlay confines broadcast domains and supplies IP reachability for the overlay. Use the appropriate method: Use Layer 3 routed links between leaf and spine switches. Before onboarding, test that the intended fabric state exists.

C:

“Rely on an overlay tunnel without any IP routing underneath” targets a different operation from the reported requirement: “the fabric must limit large shared Layer 2 failure domains”. A routed underlay confines broadcast domains and supplies IP reachability for the overlay. Use the appropriate method: Use Layer 3 routed links between leaf and spine switches. Before onboarding, test that the intended fabric state exists.

D:

“Build the fabric from a single shared collision domain” targets a different operation from the reported requirement: “the fabric must limit large shared Layer 2 failure domains”. A routed underlay confines broadcast domains and supplies IP reachability for the overlay. Use the appropriate method: Use Layer 3 routed links between leaf and spine switches. Before onboarding, test that the intended fabric state exists.

Question 498

In the fictional Atlas-7 west pod, a service recovery task following a partial path outage, the team reports that operators need consistent multi-node fabric changes and state reconciliation. Which engineering action best satisfies this request?

  1. Use only a local ping to guarantee all service intent is deployed.
  2. Use a supported fabric automation platform for coordinated configuration and visibility.
  3. Treat routing table snapshots as a complete orchestration system.
  4. Make arbitrary manual changes at each switch with no desired-state record.

Explanation

Correct Answer

B:

Coordinated tooling can compare desired fabric intent with deployed network state. For Atlas-7, confirm the actual outcome: intended configurations and actual fabric inventory can be reconciled.

Incorrect Answers

A:

“Use only a local ping to guarantee all service intent is deployed” targets a different operation from the reported requirement: “operators need consistent multi-node fabric changes and state reconciliation”. Coordinated tooling can compare desired fabric intent with deployed network state. Use the appropriate method: Use a supported fabric automation platform for coordinated configuration and visibility. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

C:

“Treat routing table snapshots as a complete orchestration system” targets a different operation from the reported requirement: “operators need consistent multi-node fabric changes and state reconciliation”. Coordinated tooling can compare desired fabric intent with deployed network state. Use the appropriate method: Use a supported fabric automation platform for coordinated configuration and visibility. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

D:

“Make arbitrary manual changes at each switch with no desired-state record” targets a different operation from the reported requirement: “operators need consistent multi-node fabric changes and state reconciliation”. Coordinated tooling can compare desired fabric intent with deployed network state. Use the appropriate method: Use a supported fabric automation platform for coordinated configuration and visibility. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

Question 499

In the fictional Summit-4 east pod, a change-freeze exception for a narrow operational fault, the team reports that routes from an external peer must be accepted or advertised selectively. Which engineering action best satisfies this request?

  1. Use a VXLAN VNI as a prefix import rule.
  2. Change CLI output formatting to suppress unwanted advertisements.
  3. Apply an explicit BGP import or export policy for the intended prefixes.
  4. Use an interface ACL as the only BGP policy language.

Explanation

Correct Answer

C:

Route policies govern which routing information is accepted or advertised. For Summit-4, confirm the actual outcome: advertised and received routes match the intended prefix policy.

Incorrect Answers

A:

“Use a VXLAN VNI as a prefix import rule” targets a different operation from the reported requirement: “routes from an external peer must be accepted or advertised selectively”. Route policies govern which routing information is accepted or advertised. Use the appropriate method: Apply an explicit BGP import or export policy for the intended prefixes.

B:

“Change CLI output formatting to suppress unwanted advertisements” targets a different operation from the reported requirement: “routes from an external peer must be accepted or advertised selectively”. Route policies govern which routing information is accepted or advertised. Use the appropriate method: Apply an explicit BGP import or export policy for the intended prefixes.

D:

“Use an interface ACL as the only BGP policy language” targets a different operation from the reported requirement: “routes from an external peer must be accepted or advertised selectively”. Route policies govern which routing information is accepted or advertised. Use the appropriate method: Apply an explicit BGP import or export policy for the intended prefixes.

Question 500

In the fictional Summit-4 west pod, a change-freeze exception for a narrow operational fault, the team reports that a VXLAN endpoint sourced from a loopback address is unreachable. The planned change is "Ensure the loopback endpoint address is advertised and routed in the underlay." Which post-change observation best validates the intended technical behavior?

  1. Use an unrelated tenant dashboard as proof, without verifying the required loopback endpoint reachability condition.
  2. Check only that the device hostname is listed in the inventory, without examining loopback endpoint reachability behavior.
  3. Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior.
  4. Verify that the remote endpoint loopback resolves through valid underlay routes.

Explanation

Correct Answer

D:

Loopback-based tunnel endpoints require routed transport reachability. The option uses “Verify that the remote endpoint loopback resolves through valid underlay routes” to address “a VXLAN endpoint sourced from a loopback address is unreachable”. The acceptance test is: the remote endpoint loopback resolves through valid underlay routes.

Incorrect Answers

A:

“Use an unrelated tenant dashboard as proof, without verifying the required loopback endpoint reachability condition” targets a different operation from the reported requirement: “a VXLAN endpoint sourced from a loopback address is unreachable”. Loopback-based tunnel endpoints require routed transport reachability. The confirming result is: the remote endpoint loopback resolves through valid underlay routes.

B:

“Check only that the device hostname is listed in the inventory, without examining loopback endpoint reachability behavior” targets a different operation from the reported requirement: “a VXLAN endpoint sourced from a loopback address is unreachable”. Loopback-based tunnel endpoints require routed transport reachability. The confirming result is: the remote endpoint loopback resolves through valid underlay routes.

C:

“Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior” targets a different operation from the reported requirement: “a VXLAN endpoint sourced from a loopback address is unreachable”. Loopback-based tunnel endpoints require routed transport reachability. The confirming result is: the remote endpoint loopback resolves through valid underlay routes.

Nokia Data Center Fabric Fundamentals (4A0-D01) Practice Tests