mcAfee Secure Website
exam =5
exam =6

Exam Code: 4A0-D01

Exam Name: Nokia Data Center Fabric Fundamentals

Certification Provider: Nokia

Nokia 4A0-D01 Questions & Answers

Reliable & Actual Study Materials for 4A0-D01 Exam Success

61 Questions & Answers with Testing Engine

"4A0-D01: Nokia Data Center Fabric Fundamentals" Testing Engine covers all the knowledge points of the real Nokia 4A0-D01 exam.

The latest actual 4A0-D01 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at 4A0-D01 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Nokia Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Nokia 4A0-D01 Practice Test 31

Question 300

In the fictional Pine-9 west pod, a replacement leaf with configuration review requirements, the team reports that two tenant Layer 2 segments need extension across a routed IP fabric. The shift handoff must specify a defensible solution and the observable service outcome. Which recommendation is technically justified?

  1. Use BGP alone as the packet data tunnel.
  2. Route raw Ethernet frames as unencapsulated IP datagrams.
  3. Make all physical spine links carry the tenant access VLAN.
  4. Use VXLAN encapsulation between reachable VTEPs.

Explanation

Correct Answer

D:

VXLAN carries tenant frames inside outer IP/UDP transport across the routed fabric. For Pine-9, confirm the actual outcome: packet traces show VXLAN encapsulation between the expected VTEPs.

Incorrect Answers

A:

“Use BGP alone as the packet data tunnel” targets a different operation from the reported requirement: “two tenant Layer 2 segments need extension across a routed IP fabric”. VXLAN carries tenant frames inside outer IP/UDP transport across the routed fabric. Use the appropriate method: Use VXLAN encapsulation between reachable VTEPs. Confirm that the replacement leaf reaches the expected operational state.

B:

“Route raw Ethernet frames as unencapsulated IP datagrams” targets a different operation from the reported requirement: “two tenant Layer 2 segments need extension across a routed IP fabric”. VXLAN carries tenant frames inside outer IP/UDP transport across the routed fabric. Use the appropriate method: Use VXLAN encapsulation between reachable VTEPs. Confirm that the replacement leaf reaches the expected operational state.

C:

“Make all physical spine links carry the tenant access VLAN” targets a different operation from the reported requirement: “two tenant Layer 2 segments need extension across a routed IP fabric”. VXLAN carries tenant frames inside outer IP/UDP transport across the routed fabric. Use the appropriate method: Use VXLAN encapsulation between reachable VTEPs. Confirm that the replacement leaf reaches the expected operational state.

Question 301

In the fictional North-10 east pod, a commissioning exercise under the on-call team, the team reports that a change should be evaluated before it reaches the active device configuration. Which engineering action best satisfies this request?

  1. Make the edits in the candidate configuration workflow and review before commit.
  2. Assume a text editor changes active SR Linux state automatically.
  3. Use a packet capture as the configuration transaction.
  4. Modify archived syslog entries instead of the candidate datastore.

Explanation

Correct Answer

A:

A candidate workflow separates proposed changes from committed running state. The option uses “Make the edits in the candidate configuration workflow and review before commit” to address “a change should be evaluated before it reaches the active device configuration”. The result must be observed on the affected component. Before onboarding, test that the intended fabric state exists.

Incorrect Answers

B:

“Assume a text editor changes active SR Linux state automatically” targets a different operation from the reported requirement: “a change should be evaluated before it reaches the active device configuration”. A candidate workflow separates proposed changes from committed running state. Use the appropriate method: Make the edits in the candidate configuration workflow and review before commit. Before onboarding, test that the intended fabric state exists.

C:

“Use a packet capture as the configuration transaction” targets a different operation from the reported requirement: “a change should be evaluated before it reaches the active device configuration”. A candidate workflow separates proposed changes from committed running state. Use the appropriate method: Make the edits in the candidate configuration workflow and review before commit. Before onboarding, test that the intended fabric state exists.

D:

“Modify archived syslog entries instead of the candidate datastore” targets a different operation from the reported requirement: “a change should be evaluated before it reaches the active device configuration”. A candidate workflow separates proposed changes from committed running state. Use the appropriate method: Make the edits in the candidate configuration workflow and review before commit. Before onboarding, test that the intended fabric state exists.

Question 302

In the fictional Atlas-7 east pod, a service recovery task following a partial path outage, the team reports that several operators repeatedly use the same long diagnostic command. The shift handoff must specify a defensible solution and the observable service outcome. Which recommendation is technically justified?

  1. Create a data-plane VXLAN tunnel for terminal convenience.
  2. Create an appropriate CLI alias for the recurring diagnostic command.
  3. Reboot the switch after every repeated command.
  4. Add a BGP community only to shorten the command text.

Explanation

Correct Answer

B:

Aliases improve CLI usability without altering network forwarding semantics. The option uses “Create an appropriate CLI alias for the recurring diagnostic command” to address “several operators repeatedly use the same long diagnostic command”. The result must be observed on the affected component. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

Incorrect Answers

A:

“Create a data-plane VXLAN tunnel for terminal convenience” targets a different operation from the reported requirement: “several operators repeatedly use the same long diagnostic command”. Aliases improve CLI usability without altering network forwarding semantics. Use the appropriate method: Create an appropriate CLI alias for the recurring diagnostic command. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

C:

“Reboot the switch after every repeated command” targets a different operation from the reported requirement: “several operators repeatedly use the same long diagnostic command”. Aliases improve CLI usability without altering network forwarding semantics. Use the appropriate method: Create an appropriate CLI alias for the recurring diagnostic command. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

D:

“Add a BGP community only to shorten the command text” targets a different operation from the reported requirement: “several operators repeatedly use the same long diagnostic command”. Aliases improve CLI usability without altering network forwarding semantics. Use the appropriate method: Create an appropriate CLI alias for the recurring diagnostic command. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

Question 303

In the fictional Atlas-7 west pod, a service recovery task following a partial path outage, the team reports that operators need to compare desired fabric behavior with measured network state. The shift handoff must specify a defensible solution and the observable service outcome. Which recommendation is technically justified?

  1. Assume a configuration file alone proves live traffic health.
  2. Ignore all network events once the initial intent is accepted.
  3. Use EDA observability with state-driven monitoring and event correlation.
  4. Use one manually updated spreadsheet as a live telemetry stream.

Explanation

Correct Answer

C:

Observability connects operational measurements and events to intended network operation. For Atlas-7, confirm the actual outcome: telemetry and events show whether deployed behavior matches intended service state.

Incorrect Answers

A:

“Assume a configuration file alone proves live traffic health” targets a different operation from the reported requirement: “operators need to compare desired fabric behavior with measured network state”. Observability connects operational measurements and events to intended network operation. Use the appropriate method: Use EDA observability with state-driven monitoring and event correlation. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

B:

“Ignore all network events once the initial intent is accepted” targets a different operation from the reported requirement: “operators need to compare desired fabric behavior with measured network state”. Observability connects operational measurements and events to intended network operation. Use the appropriate method: Use EDA observability with state-driven monitoring and event correlation. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

D:

“Use one manually updated spreadsheet as a live telemetry stream” targets a different operation from the reported requirement: “operators need to compare desired fabric behavior with measured network state”. Observability connects operational measurements and events to intended network operation. Use the appropriate method: Use EDA observability with state-driven monitoring and event correlation. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

Question 304

In the fictional Orchard-3 east pod, a lab-to-production migration after a successful canary, the team reports that a risky change requires a reliable return point. The planned change is "Take and retain a configuration checkpoint before applying the change." Which post-change observation best validates the intended technical behavior?

  1. Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior.
  2. Check only that the device hostname is listed in the inventory, without examining configuration recovery behavior.
  3. Use an unrelated tenant dashboard as proof, without verifying the required configuration recovery condition.
  4. Verify that the recorded checkpoint is available and maps to the intended prechange state.

Explanation

Correct Answer

D:

A checkpoint provides an explicit configuration reference for controlled rollback. The option uses “Verify that the recorded checkpoint is available and maps to the intended prechange state” to address “a risky change requires a reliable return point”. The acceptance test is: the recorded checkpoint is available and maps to the intended prechange state. For the staged migration, validate the affected path before expansion.

Incorrect Answers

A:

“Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior” targets a different operation from the reported requirement: “a risky change requires a reliable return point”. A checkpoint provides an explicit configuration reference for controlled rollback. The confirming result is: the recorded checkpoint is available and maps to the intended prechange state. For the staged migration, validate the affected path before expansion.

B:

“Check only that the device hostname is listed in the inventory, without examining configuration recovery behavior” targets a different operation from the reported requirement: “a risky change requires a reliable return point”. A checkpoint provides an explicit configuration reference for controlled rollback. The confirming result is: the recorded checkpoint is available and maps to the intended prechange state. For the staged migration, validate the affected path before expansion.

C:

“Use an unrelated tenant dashboard as proof, without verifying the required configuration recovery condition” targets a different operation from the reported requirement: “a risky change requires a reliable return point”. A checkpoint provides an explicit configuration reference for controlled rollback. The confirming result is: the recorded checkpoint is available and maps to the intended prechange state. For the staged migration, validate the affected path before expansion.

Question 305

In the fictional Ridge-2 east pod, a secondary data hall with tenant isolation requirements, the team reports that a support user needs limited read-only access to device state. Which engineering action best satisfies this request?

  1. Assign an appropriate SR Linux user role with scoped privileges.
  2. Share the full administrator credential with every operator.
  3. Change the system ACL only and ignore role authorization.
  4. Advertise login privilege as a BGP route community.

Explanation

Correct Answer

A:

Role-based authorization limits what authenticated users can view or modify. The option uses “Assign an appropriate SR Linux user role with scoped privileges” to address “a support user needs limited read-only access to device state”. The result must be observed on the affected component.

Incorrect Answers

B:

“Share the full administrator credential with every operator” targets a different operation from the reported requirement: “a support user needs limited read-only access to device state”. Role-based authorization limits what authenticated users can view or modify. Use the appropriate method: Assign an appropriate SR Linux user role with scoped privileges.

C:

“Change the system ACL only and ignore role authorization” targets a different operation from the reported requirement: “a support user needs limited read-only access to device state”. Role-based authorization limits what authenticated users can view or modify. Use the appropriate method: Assign an appropriate SR Linux user role with scoped privileges.

D:

“Advertise login privilege as a BGP route community” targets a different operation from the reported requirement: “a support user needs limited read-only access to device state”. Role-based authorization limits what authenticated users can view or modify. Use the appropriate method: Assign an appropriate SR Linux user role with scoped privileges.

Question 306

In the fictional Pine-9 east pod, a replacement leaf with configuration review requirements, the team reports that a VLAN-backed tenant segment is being extended using VXLAN. A peer suggested: "Replace VNI configuration with a static IPv4 default route" That did not solve the constraint. What should be chosen instead?

  1. Replace VNI configuration with a static IPv4 default route.
  2. Map the intended local tenant bridging context to the correct VNI.
  3. Use the BGP AS number as an automatic VLAN-to-VNI mapping.
  4. Apply a system ACL to name a tenant broadcast segment.

Explanation

Correct Answer

B:

A VNI identifies the logical VXLAN segment carried over the IP fabric. For Pine-9, confirm the actual outcome: both VTEPs use the intended VNI for the tenant segment.

Incorrect Answers

A:

“Replace VNI configuration with a static IPv4 default route” targets a different operation from the reported requirement: “a VLAN-backed tenant segment is being extended using VXLAN”. A VNI identifies the logical VXLAN segment carried over the IP fabric. Use the appropriate method: Map the intended local tenant bridging context to the correct VNI. Confirm that the replacement leaf reaches the expected operational state.

C:

“Use the BGP AS number as an automatic VLAN-to-VNI mapping” targets a different operation from the reported requirement: “a VLAN-backed tenant segment is being extended using VXLAN”. A VNI identifies the logical VXLAN segment carried over the IP fabric. Use the appropriate method: Map the intended local tenant bridging context to the correct VNI. Confirm that the replacement leaf reaches the expected operational state.

D:

“Apply a system ACL to name a tenant broadcast segment” targets a different operation from the reported requirement: “a VLAN-backed tenant segment is being extended using VXLAN”. A VNI identifies the logical VXLAN segment carried over the IP fabric. Use the appropriate method: Map the intended local tenant bridging context to the correct VNI. Confirm that the replacement leaf reaches the expected operational state.

Question 307

In the fictional Delta-6 west pod, a controller-managed extension requiring reproducible evidence, the team reports that operators disagree whether a deployed interface ACL actually matches the failing flow. A peer suggested: "Use only a route table to prove which ACL entry matched" That did not solve the constraint. What should be chosen instead?

  1. Assume zero-interface-error count proves an ACL permit decision.
  2. Use only a route table to prove which ACL entry matched.
  3. Inspect ACL hit counters and correlate them with test traffic.
  4. Replace a MAC-VRF as a substitute for ACL telemetry.

Explanation

Correct Answer

C:

ACL entry counters can substantiate matching behavior when correlated with the flow. The option uses “Inspect ACL hit counters and correlate them with test traffic” to address “operators disagree whether a deployed interface ACL actually matches the failing flow”. The result must be observed on the affected component.

Incorrect Answers

A:

“Assume zero-interface-error count proves an ACL permit decision” targets a different operation from the reported requirement: “operators disagree whether a deployed interface ACL actually matches the failing flow”. ACL entry counters can substantiate matching behavior when correlated with the flow. Use the appropriate method: Inspect ACL hit counters and correlate them with test traffic.

B:

“Use only a route table to prove which ACL entry matched” targets a different operation from the reported requirement: “operators disagree whether a deployed interface ACL actually matches the failing flow”. ACL entry counters can substantiate matching behavior when correlated with the flow. Use the appropriate method: Inspect ACL hit counters and correlate them with test traffic.

D:

“Replace a MAC-VRF as a substitute for ACL telemetry” targets a different operation from the reported requirement: “operators disagree whether a deployed interface ACL actually matches the failing flow”. ACL entry counters can substantiate matching behavior when correlated with the flow. Use the appropriate method: Inspect ACL hit counters and correlate them with test traffic.

Question 308

In the fictional Delta-6 west pod, a controller-managed extension requiring reproducible evidence, the team reports that several static routes must share a maintained forwarding next-hop selection. A peer suggested: "Repeat arbitrary interface aliases as route next hops" That did not solve the constraint. What should be chosen instead?

  1. Repeat arbitrary interface aliases as route next hops.
  2. Use the EDA service intent name as an IP gateway.
  3. Put all static routes into the MAC address learning table.
  4. Define and reference an appropriate next-hop group.

Explanation

Correct Answer

D:

A next-hop group separates forwarding next-hop membership from destination-prefix entries. The option uses “Define and reference an appropriate next-hop group” to address “several static routes must share a maintained forwarding next-hop selection”. The result must be observed on the affected component.

Incorrect Answers

A:

“Repeat arbitrary interface aliases as route next hops” targets a different operation from the reported requirement: “several static routes must share a maintained forwarding next-hop selection”. A next-hop group separates forwarding next-hop membership from destination-prefix entries. Use the appropriate method: Define and reference an appropriate next-hop group.

B:

“Use the EDA service intent name as an IP gateway” targets a different operation from the reported requirement: “several static routes must share a maintained forwarding next-hop selection”. A next-hop group separates forwarding next-hop membership from destination-prefix entries. Use the appropriate method: Define and reference an appropriate next-hop group.

C:

“Put all static routes into the MAC address learning table” targets a different operation from the reported requirement: “several static routes must share a maintained forwarding next-hop selection”. A next-hop group separates forwarding next-hop membership from destination-prefix entries. Use the appropriate method: Define and reference an appropriate next-hop group.

Question 309

In the fictional Metro-8 east pod, a multi-tenant fabric undergoing documented validation, the team reports that a manually configured destination prefix has no usable forwarding adjacency. The planned change is "Reference an appropriate reachable next-hop group for the static route." Which post-change observation best validates the intended technical behavior?

  1. Verify that the static prefix is installed with a valid resolved forwarding next hop.
  2. Use an unrelated tenant dashboard as proof, without verifying the required static route next-hop condition.
  3. Check only that the device hostname is listed in the inventory, without examining static route next-hop behavior.
  4. Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior.

Explanation

Correct Answer

A:

A static route needs a viable forwarding disposition or next-hop resolution. The option uses “Verify that the static prefix is installed with a valid resolved forwarding next hop” to address “a manually configured destination prefix has no usable forwarding adjacency”. The acceptance test is: the static prefix is installed with a valid resolved forwarding next hop. Observe the relevant forwarding/control-plane behavior under the approved test.

Incorrect Answers

B:

“Use an unrelated tenant dashboard as proof, without verifying the required static route next-hop condition” targets a different operation from the reported requirement: “a manually configured destination prefix has no usable forwarding adjacency”. A static route needs a viable forwarding disposition or next-hop resolution. The confirming result is: the static prefix is installed with a valid resolved forwarding next hop. Observe the relevant forwarding/control-plane behavior under the approved test.

C:

“Check only that the device hostname is listed in the inventory, without examining static route next-hop behavior” targets a different operation from the reported requirement: “a manually configured destination prefix has no usable forwarding adjacency”. A static route needs a viable forwarding disposition or next-hop resolution. The confirming result is: the static prefix is installed with a valid resolved forwarding next hop. Observe the relevant forwarding/control-plane behavior under the approved test.

D:

“Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior” targets a different operation from the reported requirement: “a manually configured destination prefix has no usable forwarding adjacency”. A static route needs a viable forwarding disposition or next-hop resolution. The confirming result is: the static prefix is installed with a valid resolved forwarding next hop. Observe the relevant forwarding/control-plane behavior under the approved test.

Question 310

In the fictional Ridge-2 east pod, a secondary data hall with tenant isolation requirements, the team reports that a support user needs limited read-only access to device state. The shift handoff must specify a defensible solution and the observable service outcome. Which recommendation is technically justified?

  1. Change the system ACL only and ignore role authorization.
  2. Assign an appropriate SR Linux user role with scoped privileges.
  3. Share the full administrator credential with every operator.
  4. Advertise login privilege as a BGP route community.

Explanation

Correct Answer

B:

Role-based authorization limits what authenticated users can view or modify. The option uses “Assign an appropriate SR Linux user role with scoped privileges” to address “a support user needs limited read-only access to device state”. The result must be observed on the affected component.

Incorrect Answers

A:

“Change the system ACL only and ignore role authorization” targets a different operation from the reported requirement: “a support user needs limited read-only access to device state”. Role-based authorization limits what authenticated users can view or modify. Use the appropriate method: Assign an appropriate SR Linux user role with scoped privileges.

C:

“Share the full administrator credential with every operator” targets a different operation from the reported requirement: “a support user needs limited read-only access to device state”. Role-based authorization limits what authenticated users can view or modify. Use the appropriate method: Assign an appropriate SR Linux user role with scoped privileges.

D:

“Advertise login privilege as a BGP route community” targets a different operation from the reported requirement: “a support user needs limited read-only access to device state”. Role-based authorization limits what authenticated users can view or modify. Use the appropriate method: Assign an appropriate SR Linux user role with scoped privileges.

Nokia Data Center Fabric Fundamentals (4A0-D01) Practice Tests