mcAfee Secure Website
exam =5
exam =6

Exam Code: 4A0-D01

Exam Name: Nokia Data Center Fabric Fundamentals

Certification Provider: Nokia

Nokia 4A0-D01 Questions & Answers

Reliable & Actual Study Materials for 4A0-D01 Exam Success

61 Questions & Answers with Testing Engine

"4A0-D01: Nokia Data Center Fabric Fundamentals" Testing Engine covers all the knowledge points of the real Nokia 4A0-D01 exam.

The latest actual 4A0-D01 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at 4A0-D01 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Nokia Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Nokia 4A0-D01 Practice Test 29

Question 280

In the fictional Delta-6 east pod, a controller-managed extension requiring reproducible evidence, the team reports that a control protocol is intermittently dropped after aggressive protection settings. The shift handoff must specify a defensible solution and the observable service outcome. Which recommendation is technically justified?

  1. Change the system time zone to eliminate policing.
  2. Disable every routing policy to bypass CPU filtering.
  3. Increase interface CRC counters manually to hide packet drops.
  4. Review CPM classification and policer rates against required control traffic.

Explanation

Correct Answer

D:

Correctly scoped policing balances CPU protection with valid protocol liveliness. For Delta-6, confirm the actual outcome: policer statistics and protocol session health match expected traffic rates.

Incorrect Answers

A:

“Change the system time zone to eliminate policing” targets a different operation from the reported requirement: “a control protocol is intermittently dropped after aggressive protection settings”. Correctly scoped policing balances CPU protection with valid protocol liveliness. Use the appropriate method: Review CPM classification and policer rates against required control traffic.

B:

“Disable every routing policy to bypass CPU filtering” targets a different operation from the reported requirement: “a control protocol is intermittently dropped after aggressive protection settings”. Correctly scoped policing balances CPU protection with valid protocol liveliness. Use the appropriate method: Review CPM classification and policer rates against required control traffic.

C:

“Increase interface CRC counters manually to hide packet drops” targets a different operation from the reported requirement: “a control protocol is intermittently dropped after aggressive protection settings”. Correctly scoped policing balances CPU protection with valid protocol liveliness. Use the appropriate method: Review CPM classification and policer rates against required control traffic.

Question 281

In the fictional Summit-4 east pod, a change-freeze exception for a narrow operational fault, the team reports that an on-call engineer needs a compact human-readable comparison of many interfaces. The planned change is "Use the CLI table presentation where supported." Which post-change observation best validates the intended technical behavior?

  1. Verify that the displayed table contains the intended interfaces and columns.
  2. Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior.
  3. Use an unrelated tenant dashboard as proof, without verifying the required tabular display condition.
  4. Check only that the device hostname is listed in the inventory, without examining tabular display behavior.

Explanation

Correct Answer

A:

Table presentation makes repeated fields easier to compare interactively. The option uses “Verify that the displayed table contains the intended interfaces and columns” to address “an on-call engineer needs a compact human-readable comparison of many interfaces”. The acceptance test is: the displayed table contains the intended interfaces and columns.

Incorrect Answers

B:

“Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior” targets a different operation from the reported requirement: “an on-call engineer needs a compact human-readable comparison of many interfaces”. Table presentation makes repeated fields easier to compare interactively. The confirming result is: the displayed table contains the intended interfaces and columns.

C:

“Use an unrelated tenant dashboard as proof, without verifying the required tabular display condition” targets a different operation from the reported requirement: “an on-call engineer needs a compact human-readable comparison of many interfaces”. Table presentation makes repeated fields easier to compare interactively. The confirming result is: the displayed table contains the intended interfaces and columns.

D:

“Check only that the device hostname is listed in the inventory, without examining tabular display behavior” targets a different operation from the reported requirement: “an on-call engineer needs a compact human-readable comparison of many interfaces”. Table presentation makes repeated fields easier to compare interactively. The confirming result is: the displayed table contains the intended interfaces and columns.

Question 282

In the fictional Harbor-1 west pod, a staged top-of-rack rollout with a bounded maintenance window, the team reports that management access to the switch itself must be restricted. The shift handoff must specify a defensible solution and the observable service outcome. Which recommendation is technically justified?

  1. Change a VXLAN VNI as an SSH authentication filter.
  2. Use the applicable system ACL or management-access policy for device-bound traffic.
  3. Use only a tenant interface ACL and assume it protects all device management.
  4. Disable tenant EVPN routes to secure the management endpoint.

Explanation

Correct Answer

B:

System-level access filtering concerns traffic destined to the device, not just transit services. For Harbor-1, confirm the actual outcome: management probes obey the intended permitted source and port policy.

Incorrect Answers

A:

“Change a VXLAN VNI as an SSH authentication filter” targets a different operation from the reported requirement: “management access to the switch itself must be restricted”. System-level access filtering concerns traffic destined to the device, not just transit services. Use the appropriate method: Use the applicable system ACL or management-access policy for device-bound traffic.

C:

“Use only a tenant interface ACL and assume it protects all device management” targets a different operation from the reported requirement: “management access to the switch itself must be restricted”. System-level access filtering concerns traffic destined to the device, not just transit services. Use the appropriate method: Use the applicable system ACL or management-access policy for device-bound traffic.

D:

“Disable tenant EVPN routes to secure the management endpoint” targets a different operation from the reported requirement: “management access to the switch itself must be restricted”. System-level access filtering concerns traffic destined to the device, not just transit services. Use the appropriate method: Use the applicable system ACL or management-access policy for device-bound traffic.

Question 283

In the fictional Metro-8 east pod, a multi-tenant fabric undergoing documented validation, the team reports that operations need repeatable tenant service deployment across the fabric. An unrelated configuration change is being considered. Which focused remediation best addresses the described problem first?

  1. Use syslog text as the only authoritative tenant service configuration.
  2. Change one access VLAN manually without representing service dependencies.
  3. Use EDA service-intent definitions with controlled reconciliation.
  4. Turn off remote EVPN route exchange and declare the service deployed.

Explanation

Correct Answer

C:

Service intent captures desired network service state across participating resources. The option uses “Use EDA service-intent definitions with controlled reconciliation” to address “operations need repeatable tenant service deployment across the fabric”. The result must be observed on the affected component. Observe the relevant forwarding/control-plane behavior under the approved test.

Incorrect Answers

A:

“Use syslog text as the only authoritative tenant service configuration” targets a different operation from the reported requirement: “operations need repeatable tenant service deployment across the fabric”. Service intent captures desired network service state across participating resources. Use the appropriate method: Use EDA service-intent definitions with controlled reconciliation. Observe the relevant forwarding/control-plane behavior under the approved test.

B:

“Change one access VLAN manually without representing service dependencies” targets a different operation from the reported requirement: “operations need repeatable tenant service deployment across the fabric”. Service intent captures desired network service state across participating resources. Use the appropriate method: Use EDA service-intent definitions with controlled reconciliation. Observe the relevant forwarding/control-plane behavior under the approved test.

D:

“Turn off remote EVPN route exchange and declare the service deployed” targets a different operation from the reported requirement: “operations need repeatable tenant service deployment across the fabric”. Service intent captures desired network service state across participating resources. Use the appropriate method: Use EDA service-intent definitions with controlled reconciliation. Observe the relevant forwarding/control-plane behavior under the approved test.

Question 284

In the fictional Metro-8 east pod, a multi-tenant fabric undergoing documented validation, the team reports that a VLAN-backed tenant segment is being extended using VXLAN. Which engineering action best satisfies this request?

  1. Replace VNI configuration with a static IPv4 default route.
  2. Apply a system ACL to name a tenant broadcast segment.
  3. Use the BGP AS number as an automatic VLAN-to-VNI mapping.
  4. Map the intended local tenant bridging context to the correct VNI.

Explanation

Correct Answer

D:

A VNI identifies the logical VXLAN segment carried over the IP fabric. The option uses “Map the intended local tenant bridging context to the correct VNI” to address “a VLAN-backed tenant segment is being extended using VXLAN”. The result must be observed on the affected component. Observe the relevant forwarding/control-plane behavior under the approved test.

Incorrect Answers

A:

“Replace VNI configuration with a static IPv4 default route” targets a different operation from the reported requirement: “a VLAN-backed tenant segment is being extended using VXLAN”. A VNI identifies the logical VXLAN segment carried over the IP fabric. Use the appropriate method: Map the intended local tenant bridging context to the correct VNI. Observe the relevant forwarding/control-plane behavior under the approved test.

B:

“Apply a system ACL to name a tenant broadcast segment” targets a different operation from the reported requirement: “a VLAN-backed tenant segment is being extended using VXLAN”. A VNI identifies the logical VXLAN segment carried over the IP fabric. Use the appropriate method: Map the intended local tenant bridging context to the correct VNI. Observe the relevant forwarding/control-plane behavior under the approved test.

C:

“Use the BGP AS number as an automatic VLAN-to-VNI mapping” targets a different operation from the reported requirement: “a VLAN-backed tenant segment is being extended using VXLAN”. A VNI identifies the logical VXLAN segment carried over the IP fabric. Use the appropriate method: Map the intended local tenant bridging context to the correct VNI. Observe the relevant forwarding/control-plane behavior under the approved test.

Question 285

In the fictional Summit-4 west pod, a change-freeze exception for a narrow operational fault, the team reports that a support team wants reusable context values across diagnostic commands. An unrelated configuration change is being considered. Which focused remediation best addresses the described problem first?

  1. Use supported CLI environment variables for repeatable command contexts.
  2. Write a static route for every terminal shortcut.
  3. Edit an ACL policer as a substitute for CLI variables.
  4. Advertise CLI strings as EVPN prefixes.

Explanation

Correct Answer

A:

Environment variables organize command-line context rather than protocol forwarding. For Summit-4, confirm the actual outcome: the intended CLI context resolves consistently during diagnostics.

Incorrect Answers

B:

“Write a static route for every terminal shortcut” targets a different operation from the reported requirement: “a support team wants reusable context values across diagnostic commands”. Environment variables organize command-line context rather than protocol forwarding. Use the appropriate method: Use supported CLI environment variables for repeatable command contexts.

C:

“Edit an ACL policer as a substitute for CLI variables” targets a different operation from the reported requirement: “a support team wants reusable context values across diagnostic commands”. Environment variables organize command-line context rather than protocol forwarding. Use the appropriate method: Use supported CLI environment variables for repeatable command contexts.

D:

“Advertise CLI strings as EVPN prefixes” targets a different operation from the reported requirement: “a support team wants reusable context values across diagnostic commands”. Environment variables organize command-line context rather than protocol forwarding. Use the appropriate method: Use supported CLI environment variables for repeatable command contexts.

Question 286

In the fictional Ridge-2 east pod, a secondary data hall with tenant isolation requirements, the team reports that the monitoring platform is flooded with low-priority diagnostic records. The planned change is "Tune supported logging levels and destinations while retaining important events." Which post-change observation best validates the intended technical behavior?

  1. Use an unrelated tenant dashboard as proof, without verifying the required log severity selection condition.
  2. Verify that critical events remain visible while routine noise is reduced.
  3. Check only that the device hostname is listed in the inventory, without examining log severity selection behavior.
  4. Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior.

Explanation

Correct Answer

B:

Severity and destination selection reduce noise without removing necessary fault evidence. The option uses “Verify that critical events remain visible while routine noise is reduced” to address “the monitoring platform is flooded with low-priority diagnostic records”. The acceptance test is: critical events remain visible while routine noise is reduced.

Incorrect Answers

A:

“Use an unrelated tenant dashboard as proof, without verifying the required log severity selection condition” targets a different operation from the reported requirement: “the monitoring platform is flooded with low-priority diagnostic records”. Severity and destination selection reduce noise without removing necessary fault evidence. The confirming result is: critical events remain visible while routine noise is reduced.

C:

“Check only that the device hostname is listed in the inventory, without examining log severity selection behavior” targets a different operation from the reported requirement: “the monitoring platform is flooded with low-priority diagnostic records”. Severity and destination selection reduce noise without removing necessary fault evidence. The confirming result is: critical events remain visible while routine noise is reduced.

D:

“Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior” targets a different operation from the reported requirement: “the monitoring platform is flooded with low-priority diagnostic records”. Severity and destination selection reduce noise without removing necessary fault evidence. The confirming result is: critical events remain visible while routine noise is reduced.

Question 287

In the fictional Pine-9 east pod, a replacement leaf with configuration review requirements, the team reports that a policy requires a destination prefix to be explicitly discarded. The planned change is "Use a properly scoped static blackhole disposition for that prefix." Which post-change observation best validates the intended technical behavior?

  1. Use an unrelated tenant dashboard as proof, without verifying the required discard routes condition.
  2. Check only that the device hostname is listed in the inventory, without examining discard routes behavior.
  3. Verify that the targeted prefix resolves to discard while unrelated prefixes keep valid paths.
  4. Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior.

Explanation

Correct Answer

C:

A blackhole route deliberately discards matching traffic rather than forwarding it. The option uses “Verify that the targeted prefix resolves to discard while unrelated prefixes keep valid paths” to address “a policy requires a destination prefix to be explicitly discarded”. The acceptance test is: the targeted prefix resolves to discard while unrelated prefixes keep valid paths. Confirm that the replacement leaf reaches the expected operational state.

Incorrect Answers

A:

“Use an unrelated tenant dashboard as proof, without verifying the required discard routes condition” targets a different operation from the reported requirement: “a policy requires a destination prefix to be explicitly discarded”. A blackhole route deliberately discards matching traffic rather than forwarding it. The confirming result is: the targeted prefix resolves to discard while unrelated prefixes keep valid paths. Confirm that the replacement leaf reaches the expected operational state.

B:

“Check only that the device hostname is listed in the inventory, without examining discard routes behavior” targets a different operation from the reported requirement: “a policy requires a destination prefix to be explicitly discarded”. A blackhole route deliberately discards matching traffic rather than forwarding it. The confirming result is: the targeted prefix resolves to discard while unrelated prefixes keep valid paths. Confirm that the replacement leaf reaches the expected operational state.

D:

“Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior” targets a different operation from the reported requirement: “a policy requires a destination prefix to be explicitly discarded”. A blackhole route deliberately discards matching traffic rather than forwarding it. The confirming result is: the targeted prefix resolves to discard while unrelated prefixes keep valid paths. Confirm that the replacement leaf reaches the expected operational state.

Question 288

In the fictional Canyon-5 west pod, a fabric operations audit prior to tenant onboarding, the team reports that multiple tenant subnets must communicate but unrelated tenants must remain isolated. The planned change is "Use tenant-specific IP-VRF routing with the intended L3 EVPN overlay service." Which post-change observation best validates the intended technical behavior?

  1. Use an unrelated tenant dashboard as proof, without verifying the required l3 evpn segmentation condition.
  2. Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior.
  3. Check only that the device hostname is listed in the inventory, without examining l3 evpn segmentation behavior.
  4. Verify that routing works between authorized tenant subnets without unauthorized VRF crossing.

Explanation

Correct Answer

D:

Tenant-specific L3 EVPN separates inter-subnet routing from cross-customer leakage. The option uses “Verify that routing works between authorized tenant subnets without unauthorized VRF crossing” to address “multiple tenant subnets must communicate but unrelated tenants must remain isolated”. The acceptance test is: routing works between authorized tenant subnets without unauthorized VRF crossing. Before onboarding, test that the intended fabric state exists.

Incorrect Answers

A:

“Use an unrelated tenant dashboard as proof, without verifying the required l3 evpn segmentation condition” targets a different operation from the reported requirement: “multiple tenant subnets must communicate but unrelated tenants must remain isolated”. Tenant-specific L3 EVPN separates inter-subnet routing from cross-customer leakage. The confirming result is: routing works between authorized tenant subnets without unauthorized VRF crossing. Before onboarding, test that the intended fabric state exists.

B:

“Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior” targets a different operation from the reported requirement: “multiple tenant subnets must communicate but unrelated tenants must remain isolated”. Tenant-specific L3 EVPN separates inter-subnet routing from cross-customer leakage. The confirming result is: routing works between authorized tenant subnets without unauthorized VRF crossing. Before onboarding, test that the intended fabric state exists.

C:

“Check only that the device hostname is listed in the inventory, without examining l3 evpn segmentation behavior” targets a different operation from the reported requirement: “multiple tenant subnets must communicate but unrelated tenants must remain isolated”. Tenant-specific L3 EVPN separates inter-subnet routing from cross-customer leakage. The confirming result is: routing works between authorized tenant subnets without unauthorized VRF crossing. Before onboarding, test that the intended fabric state exists.

Question 289

In the fictional Pine-9 east pod, a replacement leaf with configuration review requirements, the team reports that a route appears in logs but cannot be found in the active forwarding table. A peer suggested: "Treat old syslog lines as the live FIB" That did not solve the constraint. What should be chosen instead?

  1. Compare logs with current protocol and forwarding state.
  2. Disable interface statistics to reconcile the mismatch.
  3. Treat old syslog lines as the live FIB.
  4. Assume all historically advertised routes remain installed forever.

Explanation

Correct Answer

A:

Historical events alone do not establish currently installed forwarding state. For Pine-9, confirm the actual outcome: current routing and FIB observations agree with the incident interpretation.

Incorrect Answers

B:

“Disable interface statistics to reconcile the mismatch” targets a different operation from the reported requirement: “a route appears in logs but cannot be found in the active forwarding table”. Historical events alone do not establish currently installed forwarding state. Use the appropriate method: Compare logs with current protocol and forwarding state. Confirm that the replacement leaf reaches the expected operational state.

C:

“Treat old syslog lines as the live FIB” targets a different operation from the reported requirement: “a route appears in logs but cannot be found in the active forwarding table”. Historical events alone do not establish currently installed forwarding state. Use the appropriate method: Compare logs with current protocol and forwarding state. Confirm that the replacement leaf reaches the expected operational state.

D:

“Assume all historically advertised routes remain installed forever” targets a different operation from the reported requirement: “a route appears in logs but cannot be found in the active forwarding table”. Historical events alone do not establish currently installed forwarding state. Use the appropriate method: Compare logs with current protocol and forwarding state. Confirm that the replacement leaf reaches the expected operational state.

Question 290

In the fictional Ridge-2 east pod, a secondary data hall with tenant isolation requirements, the team reports that a link carries packets but the application sees intermittent errors. Which engineering action best satisfies this request?

  1. Change the route distinguisher to reset physical CRC errors.
  2. Inspect error, discard and packet counters for that interface.
  3. Check only the switch hostname to judge packet loss.
  4. Assume a green GUI icon proves no packet impairment.

Explanation

Correct Answer

B:

Counters help distinguish physical or forwarding problems from configuration guesses. The option uses “Inspect error, discard and packet counters for that interface” to address “a link carries packets but the application sees intermittent errors”. The result must be observed on the affected component.

Incorrect Answers

A:

“Change the route distinguisher to reset physical CRC errors” targets a different operation from the reported requirement: “a link carries packets but the application sees intermittent errors”. Counters help distinguish physical or forwarding problems from configuration guesses. Use the appropriate method: Inspect error, discard and packet counters for that interface.

C:

“Check only the switch hostname to judge packet loss” targets a different operation from the reported requirement: “a link carries packets but the application sees intermittent errors”. Counters help distinguish physical or forwarding problems from configuration guesses. Use the appropriate method: Inspect error, discard and packet counters for that interface.

D:

“Assume a green GUI icon proves no packet impairment” targets a different operation from the reported requirement: “a link carries packets but the application sees intermittent errors”. Counters help distinguish physical or forwarding problems from configuration guesses. Use the appropriate method: Inspect error, discard and packet counters for that interface.

Nokia Data Center Fabric Fundamentals (4A0-D01) Practice Tests