mcAfee Secure Website
exam =5
exam =6

Exam Code: 4A0-D01

Exam Name: Nokia Data Center Fabric Fundamentals

Certification Provider: Nokia

Nokia 4A0-D01 Questions & Answers

Reliable & Actual Study Materials for 4A0-D01 Exam Success

61 Questions & Answers with Testing Engine

"4A0-D01: Nokia Data Center Fabric Fundamentals" Testing Engine covers all the knowledge points of the real Nokia 4A0-D01 exam.

The latest actual 4A0-D01 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at 4A0-D01 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Nokia Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Nokia 4A0-D01 Practice Test 30

Question 290

In the fictional Ridge-2 east pod, a secondary data hall with tenant isolation requirements, the team reports that a link carries packets but the application sees intermittent errors. Which engineering action best satisfies this request?

  1. Change the route distinguisher to reset physical CRC errors.
  2. Inspect error, discard and packet counters for that interface.
  3. Check only the switch hostname to judge packet loss.
  4. Assume a green GUI icon proves no packet impairment.

Explanation

Correct Answer

B:

Counters help distinguish physical or forwarding problems from configuration guesses. The option uses “Inspect error, discard and packet counters for that interface” to address “a link carries packets but the application sees intermittent errors”. The result must be observed on the affected component.

Incorrect Answers

A:

“Change the route distinguisher to reset physical CRC errors” targets a different operation from the reported requirement: “a link carries packets but the application sees intermittent errors”. Counters help distinguish physical or forwarding problems from configuration guesses. Use the appropriate method: Inspect error, discard and packet counters for that interface.

C:

“Check only the switch hostname to judge packet loss” targets a different operation from the reported requirement: “a link carries packets but the application sees intermittent errors”. Counters help distinguish physical or forwarding problems from configuration guesses. Use the appropriate method: Inspect error, discard and packet counters for that interface.

D:

“Assume a green GUI icon proves no packet impairment” targets a different operation from the reported requirement: “a link carries packets but the application sees intermittent errors”. Counters help distinguish physical or forwarding problems from configuration guesses. Use the appropriate method: Inspect error, discard and packet counters for that interface.

Question 291

In the fictional North-10 west pod, a commissioning exercise under the on-call team, the team reports that a JSON-RPC automation client must connect securely to SR Linux. The planned change is "Associate an appropriate TLS server profile with the JSON-RPC service." Which post-change observation best validates the intended technical behavior?

  1. Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior.
  2. Check only that the device hostname is listed in the inventory, without examining json-rpc secure transport behavior.
  3. Verify that authorized clients connect using validated TLS settings.
  4. Use an unrelated tenant dashboard as proof, without verifying the required json-rpc secure transport condition.

Explanation

Correct Answer

C:

Management API security requires an appropriate server identity and transport protection. The option uses “Verify that authorized clients connect using validated TLS settings” to address “a JSON-RPC automation client must connect securely to SR Linux”. The acceptance test is: authorized clients connect using validated TLS settings. Before onboarding, test that the intended fabric state exists.

Incorrect Answers

A:

“Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior” targets a different operation from the reported requirement: “a JSON-RPC automation client must connect securely to SR Linux”. Management API security requires an appropriate server identity and transport protection. The confirming result is: authorized clients connect using validated TLS settings. Before onboarding, test that the intended fabric state exists.

B:

“Check only that the device hostname is listed in the inventory, without examining json-rpc secure transport behavior” targets a different operation from the reported requirement: “a JSON-RPC automation client must connect securely to SR Linux”. Management API security requires an appropriate server identity and transport protection. The confirming result is: authorized clients connect using validated TLS settings. Before onboarding, test that the intended fabric state exists.

D:

“Use an unrelated tenant dashboard as proof, without verifying the required json-rpc secure transport condition” targets a different operation from the reported requirement: “a JSON-RPC automation client must connect securely to SR Linux”. Management API security requires an appropriate server identity and transport protection. The confirming result is: authorized clients connect using validated TLS settings. Before onboarding, test that the intended fabric state exists.

Question 292

In the fictional Ridge-2 west pod, a secondary data hall with tenant isolation requirements, the team reports that two access ports must share tenant Layer 2 reachability without becoming a global bridge. An unrelated configuration change is being considered. Which focused remediation best addresses the described problem first?

  1. Use a CPM policer as the VLAN-to-bridge mapping.
  2. Leak all tenant routes into the default network instance.
  3. Use an IP-VRF alone as the Ethernet switching table.
  4. Attach the ports to the intended MAC-VRF bridge domain.

Explanation

Correct Answer

D:

A MAC-VRF supplies tenant Layer 2 MAC-learning and bridging scope. For Ridge-2, confirm the actual outcome: the local tenant MACs learn within only the chosen MAC-VRF.

Incorrect Answers

A:

“Use a CPM policer as the VLAN-to-bridge mapping” targets a different operation from the reported requirement: “two access ports must share tenant Layer 2 reachability without becoming a global bridge”. A MAC-VRF supplies tenant Layer 2 MAC-learning and bridging scope. Use the appropriate method: Attach the ports to the intended MAC-VRF bridge domain.

B:

“Leak all tenant routes into the default network instance” targets a different operation from the reported requirement: “two access ports must share tenant Layer 2 reachability without becoming a global bridge”. A MAC-VRF supplies tenant Layer 2 MAC-learning and bridging scope. Use the appropriate method: Attach the ports to the intended MAC-VRF bridge domain.

C:

“Use an IP-VRF alone as the Ethernet switching table” targets a different operation from the reported requirement: “two access ports must share tenant Layer 2 reachability without becoming a global bridge”. A MAC-VRF supplies tenant Layer 2 MAC-learning and bridging scope. Use the appropriate method: Attach the ports to the intended MAC-VRF bridge domain.

Question 293

In the fictional North-10 west pod, a commissioning exercise under the on-call team, the team reports that traffic must route between tenant subnets while maintaining VRF isolation across VTEPs. Which engineering action best satisfies this request?

  1. Use a correctly designed symmetric IRB L3 EVPN routing model.
  2. Remove the IP-VRF and route all tenants in a single default instance.
  3. Require destination-VLAN bridge membership at every intermediary hop.
  4. Use a CLI alias as the inter-subnet forwarding method.

Explanation

Correct Answer

A:

Symmetric IRB uses distributed tenant routing constructs to support inter-subnet traffic over the overlay. For North-10, confirm the actual outcome: inter-subnet flows follow intended IP-VRF routing and VTEP endpoints.

Incorrect Answers

B:

“Remove the IP-VRF and route all tenants in a single default instance” targets a different operation from the reported requirement: “traffic must route between tenant subnets while maintaining VRF isolation across VTEPs”. Symmetric IRB uses distributed tenant routing constructs to support inter-subnet traffic over the overlay. Use the appropriate method: Use a correctly designed symmetric IRB L3 EVPN routing model. Before onboarding, test that the intended fabric state exists.

C:

“Require destination-VLAN bridge membership at every intermediary hop” targets a different operation from the reported requirement: “traffic must route between tenant subnets while maintaining VRF isolation across VTEPs”. Symmetric IRB uses distributed tenant routing constructs to support inter-subnet traffic over the overlay. Use the appropriate method: Use a correctly designed symmetric IRB L3 EVPN routing model. Before onboarding, test that the intended fabric state exists.

D:

“Use a CLI alias as the inter-subnet forwarding method” targets a different operation from the reported requirement: “traffic must route between tenant subnets while maintaining VRF isolation across VTEPs”. Symmetric IRB uses distributed tenant routing constructs to support inter-subnet traffic over the overlay. Use the appropriate method: Use a correctly designed symmetric IRB L3 EVPN routing model. Before onboarding, test that the intended fabric state exists.

Question 294

In the fictional Metro-8 west pod, a multi-tenant fabric undergoing documented validation, the team reports that a leaf's routed BGP peering fails after peer-AS data was changed. The shift handoff must specify a defensible solution and the observable service outcome. Which recommendation is technically justified?

  1. Change the syslog severity to fix the session.
  2. Correct the neighbor addressing and peer autonomous system configuration.
  3. Create a MAC-VRF rather than verifying the neighbor.
  4. Add a VXLAN VNI to establish the underlay BGP session.

Explanation

Correct Answer

B:

BGP session establishment requires consistent neighbor transport and AS expectations. For Metro-8, confirm the actual outcome: the intended BGP neighbor is established with the correct peer identity.

Incorrect Answers

A:

“Change the syslog severity to fix the session” targets a different operation from the reported requirement: “a leaf's routed BGP peering fails after peer-AS data was changed”. BGP session establishment requires consistent neighbor transport and AS expectations. Use the appropriate method: Correct the neighbor addressing and peer autonomous system configuration. Observe the relevant forwarding/control-plane behavior under the approved test.

C:

“Create a MAC-VRF rather than verifying the neighbor” targets a different operation from the reported requirement: “a leaf's routed BGP peering fails after peer-AS data was changed”. BGP session establishment requires consistent neighbor transport and AS expectations. Use the appropriate method: Correct the neighbor addressing and peer autonomous system configuration. Observe the relevant forwarding/control-plane behavior under the approved test.

D:

“Add a VXLAN VNI to establish the underlay BGP session” targets a different operation from the reported requirement: “a leaf's routed BGP peering fails after peer-AS data was changed”. BGP session establishment requires consistent neighbor transport and AS expectations. Use the appropriate method: Correct the neighbor addressing and peer autonomous system configuration. Observe the relevant forwarding/control-plane behavior under the approved test.

Question 295

In the fictional North-10 east pod, a commissioning exercise under the on-call team, the team reports that an expanding data hall requires extra fabric path capacity without redesigning every leaf. A peer suggested: "Force every leaf to forward through its physical neighbor leaf" That did not solve the constraint. What should be chosen instead?

  1. Remove the routed underlay and create one broadcast domain.
  2. Force every leaf to forward through its physical neighbor leaf.
  3. Add compatible spine capacity and attach the fabric leaves to it.
  4. Insert a single Layer 2 hub between all existing spines.

Explanation

Correct Answer

C:

Adding spine capacity is a normal way to increase leaf-spine fabric path diversity. For North-10, confirm the actual outcome: new spine adjacencies and expected routes become operational on participating leaves.

Incorrect Answers

A:

“Remove the routed underlay and create one broadcast domain” targets a different operation from the reported requirement: “an expanding data hall requires extra fabric path capacity without redesigning every leaf”. Adding spine capacity is a normal way to increase leaf-spine fabric path diversity. Use the appropriate method: Add compatible spine capacity and attach the fabric leaves to it. Before onboarding, test that the intended fabric state exists.

B:

“Force every leaf to forward through its physical neighbor leaf” targets a different operation from the reported requirement: “an expanding data hall requires extra fabric path capacity without redesigning every leaf”. Adding spine capacity is a normal way to increase leaf-spine fabric path diversity. Use the appropriate method: Add compatible spine capacity and attach the fabric leaves to it. Before onboarding, test that the intended fabric state exists.

D:

“Insert a single Layer 2 hub between all existing spines” targets a different operation from the reported requirement: “an expanding data hall requires extra fabric path capacity without redesigning every leaf”. Adding spine capacity is a normal way to increase leaf-spine fabric path diversity. Use the appropriate method: Add compatible spine capacity and attach the fabric leaves to it. Before onboarding, test that the intended fabric state exists.

Question 296

In the fictional Harbor-1 west pod, a staged top-of-rack rollout with a bounded maintenance window, the team reports that a customer needs an isolated IPv4 route table. The shift handoff must specify a defensible solution and the observable service outcome. Which recommendation is technically justified?

  1. Put all customer prefixes into an unsegmented default routing table.
  2. Use only a MAC-VRF when separate L3 routes are required.
  3. Use a CLI alias as the customer network instance.
  4. Use a dedicated IP-VRF network instance for its Layer 3 routes.

Explanation

Correct Answer

D:

An IP-VRF gives the tenant a distinct IP forwarding context. For Harbor-1, confirm the actual outcome: the tenant's prefixes appear in the intended IP-VRF and not unrelated VRFs.

Incorrect Answers

A:

“Put all customer prefixes into an unsegmented default routing table” targets a different operation from the reported requirement: “a customer needs an isolated IPv4 route table”. An IP-VRF gives the tenant a distinct IP forwarding context. Use the appropriate method: Use a dedicated IP-VRF network instance for its Layer 3 routes.

B:

“Use only a MAC-VRF when separate L3 routes are required” targets a different operation from the reported requirement: “a customer needs an isolated IPv4 route table”. An IP-VRF gives the tenant a distinct IP forwarding context. Use the appropriate method: Use a dedicated IP-VRF network instance for its Layer 3 routes.

C:

“Use a CLI alias as the customer network instance” targets a different operation from the reported requirement: “a customer needs an isolated IPv4 route table”. An IP-VRF gives the tenant a distinct IP forwarding context. Use the appropriate method: Use a dedicated IP-VRF network instance for its Layer 3 routes.

Question 297

In the fictional Harbor-1 east pod, a staged top-of-rack rollout with a bounded maintenance window, the team reports that a leaf port must carry separate tagged tenant attachment networks. A peer suggested: "Use a BGP local preference as a VLAN identifier" That did not solve the constraint. What should be chosen instead?

  1. Define matching VLAN-tagged subinterfaces with the correct encapsulation.
  2. Configure a VXLAN VNI as a physical Ethernet speed.
  3. Use a BGP local preference as a VLAN identifier.
  4. Put all tenants into one untagged subinterface without segmentation.

Explanation

Correct Answer

A:

Subinterfaces permit explicit per-tag service attachment on an interface. For Harbor-1, confirm the actual outcome: the expected tags and subinterfaces appear in the attachment configuration and traffic counters.

Incorrect Answers

B:

“Configure a VXLAN VNI as a physical Ethernet speed” targets a different operation from the reported requirement: “a leaf port must carry separate tagged tenant attachment networks”. Subinterfaces permit explicit per-tag service attachment on an interface. Use the appropriate method: Define matching VLAN-tagged subinterfaces with the correct encapsulation.

C:

“Use a BGP local preference as a VLAN identifier” targets a different operation from the reported requirement: “a leaf port must carry separate tagged tenant attachment networks”. Subinterfaces permit explicit per-tag service attachment on an interface. Use the appropriate method: Define matching VLAN-tagged subinterfaces with the correct encapsulation.

D:

“Put all tenants into one untagged subinterface without segmentation” targets a different operation from the reported requirement: “a leaf port must carry separate tagged tenant attachment networks”. Subinterfaces permit explicit per-tag service attachment on an interface. Use the appropriate method: Define matching VLAN-tagged subinterfaces with the correct encapsulation.

Question 298

In the fictional Harbor-1 east pod, a staged top-of-rack rollout with a bounded maintenance window, the team reports that a support user needs limited read-only access to device state. An unrelated configuration change is being considered. Which focused remediation best addresses the described problem first?

  1. Change the system ACL only and ignore role authorization.
  2. Assign an appropriate SR Linux user role with scoped privileges.
  3. Share the full administrator credential with every operator.
  4. Advertise login privilege as a BGP route community.

Explanation

Correct Answer

B:

Role-based authorization limits what authenticated users can view or modify. The option uses “Assign an appropriate SR Linux user role with scoped privileges” to address “a support user needs limited read-only access to device state”. The result must be observed on the affected component.

Incorrect Answers

A:

“Change the system ACL only and ignore role authorization” targets a different operation from the reported requirement: “a support user needs limited read-only access to device state”. Role-based authorization limits what authenticated users can view or modify. Use the appropriate method: Assign an appropriate SR Linux user role with scoped privileges.

C:

“Share the full administrator credential with every operator” targets a different operation from the reported requirement: “a support user needs limited read-only access to device state”. Role-based authorization limits what authenticated users can view or modify. Use the appropriate method: Assign an appropriate SR Linux user role with scoped privileges.

D:

“Advertise login privilege as a BGP route community” targets a different operation from the reported requirement: “a support user needs limited read-only access to device state”. Role-based authorization limits what authenticated users can view or modify. Use the appropriate method: Assign an appropriate SR Linux user role with scoped privileges.

Question 299

In the fictional Delta-6 west pod, a controller-managed extension requiring reproducible evidence, the team reports that automation must distinguish configured interface intent from observed link health. A peer suggested: "Treat desired admin state as proof of operational signal" That did not solve the constraint. What should be chosen instead?

  1. Treat desired admin state as proof of operational signal.
  2. Use an EVPN route target as the source of optics health.
  3. Read the appropriate modeled configuration and state objects separately.
  4. Rely on VLAN names as physical transceiver measurements.

Explanation

Correct Answer

C:

A configured value and an operationally measured value answer different questions. For Delta-6, confirm the actual outcome: the model shows both intended admin setting and actual operational status.

Incorrect Answers

A:

“Treat desired admin state as proof of operational signal” targets a different operation from the reported requirement: “automation must distinguish configured interface intent from observed link health”. A configured value and an operationally measured value answer different questions. Use the appropriate method: Read the appropriate modeled configuration and state objects separately.

B:

“Use an EVPN route target as the source of optics health” targets a different operation from the reported requirement: “automation must distinguish configured interface intent from observed link health”. A configured value and an operationally measured value answer different questions. Use the appropriate method: Read the appropriate modeled configuration and state objects separately.

D:

“Rely on VLAN names as physical transceiver measurements” targets a different operation from the reported requirement: “automation must distinguish configured interface intent from observed link health”. A configured value and an operationally measured value answer different questions. Use the appropriate method: Read the appropriate modeled configuration and state objects separately.

Question 300

In the fictional Pine-9 west pod, a replacement leaf with configuration review requirements, the team reports that two tenant Layer 2 segments need extension across a routed IP fabric. The shift handoff must specify a defensible solution and the observable service outcome. Which recommendation is technically justified?

  1. Use BGP alone as the packet data tunnel.
  2. Route raw Ethernet frames as unencapsulated IP datagrams.
  3. Make all physical spine links carry the tenant access VLAN.
  4. Use VXLAN encapsulation between reachable VTEPs.

Explanation

Correct Answer

D:

VXLAN carries tenant frames inside outer IP/UDP transport across the routed fabric. For Pine-9, confirm the actual outcome: packet traces show VXLAN encapsulation between the expected VTEPs.

Incorrect Answers

A:

“Use BGP alone as the packet data tunnel” targets a different operation from the reported requirement: “two tenant Layer 2 segments need extension across a routed IP fabric”. VXLAN carries tenant frames inside outer IP/UDP transport across the routed fabric. Use the appropriate method: Use VXLAN encapsulation between reachable VTEPs. Confirm that the replacement leaf reaches the expected operational state.

B:

“Route raw Ethernet frames as unencapsulated IP datagrams” targets a different operation from the reported requirement: “two tenant Layer 2 segments need extension across a routed IP fabric”. VXLAN carries tenant frames inside outer IP/UDP transport across the routed fabric. Use the appropriate method: Use VXLAN encapsulation between reachable VTEPs. Confirm that the replacement leaf reaches the expected operational state.

C:

“Make all physical spine links carry the tenant access VLAN” targets a different operation from the reported requirement: “two tenant Layer 2 segments need extension across a routed IP fabric”. VXLAN carries tenant frames inside outer IP/UDP transport across the routed fabric. Use the appropriate method: Use VXLAN encapsulation between reachable VTEPs. Confirm that the replacement leaf reaches the expected operational state.

Nokia Data Center Fabric Fundamentals (4A0-D01) Practice Tests