mcAfee Secure Website
exam =5
exam =6

Exam Code: 4A0-D01

Exam Name: Nokia Data Center Fabric Fundamentals

Certification Provider: Nokia

Nokia 4A0-D01 Questions & Answers

Reliable & Actual Study Materials for 4A0-D01 Exam Success

61 Questions & Answers with Testing Engine

"4A0-D01: Nokia Data Center Fabric Fundamentals" Testing Engine covers all the knowledge points of the real Nokia 4A0-D01 exam.

The latest actual 4A0-D01 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at 4A0-D01 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Nokia Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Nokia 4A0-D01 Practice Test 15

Question 140

In the fictional North-10 east pod, a commissioning exercise under the on-call team, the team reports that the overlay needs to advertise IP routing reachability beyond individual MAC entries. An unrelated configuration change is being considered. Which focused remediation best addresses the described problem first?

  1. Use only Type 3 membership routes to represent all routed prefixes.
  2. Treat an interface ACL entry as an EVPN IP route.
  3. Assign a MAC-VRF bridge flood-list in place of an L3 prefix advertisement.
  4. Use appropriate EVPN Type 5 IP prefix advertisements.

Explanation

Correct Answer

D:

IP prefix routes advertise Layer 3 destination reachability within EVPN. The option uses “Use appropriate EVPN Type 5 IP prefix advertisements” to address “the overlay needs to advertise IP routing reachability beyond individual MAC entries”. The result must be observed on the affected component. Before onboarding, test that the intended fabric state exists.

Incorrect Answers

A:

“Use only Type 3 membership routes to represent all routed prefixes” targets a different operation from the reported requirement: “the overlay needs to advertise IP routing reachability beyond individual MAC entries”. IP prefix routes advertise Layer 3 destination reachability within EVPN. Use the appropriate method: Use appropriate EVPN Type 5 IP prefix advertisements. Before onboarding, test that the intended fabric state exists.

B:

“Treat an interface ACL entry as an EVPN IP route” targets a different operation from the reported requirement: “the overlay needs to advertise IP routing reachability beyond individual MAC entries”. IP prefix routes advertise Layer 3 destination reachability within EVPN. Use the appropriate method: Use appropriate EVPN Type 5 IP prefix advertisements. Before onboarding, test that the intended fabric state exists.

C:

“Assign a MAC-VRF bridge flood-list in place of an L3 prefix advertisement” targets a different operation from the reported requirement: “the overlay needs to advertise IP routing reachability beyond individual MAC entries”. IP prefix routes advertise Layer 3 destination reachability within EVPN. Use the appropriate method: Use appropriate EVPN Type 5 IP prefix advertisements. Before onboarding, test that the intended fabric state exists.

Question 141

In the fictional Ridge-2 east pod, a secondary data hall with tenant isolation requirements, the team reports that traffic must route between tenant subnets while maintaining VRF isolation across VTEPs. The shift handoff must specify a defensible solution and the observable service outcome. Which recommendation is technically justified?

  1. Use a correctly designed symmetric IRB L3 EVPN routing model.
  2. Use a CLI alias as the inter-subnet forwarding method.
  3. Require destination-VLAN bridge membership at every intermediary hop.
  4. Remove the IP-VRF and route all tenants in a single default instance.

Explanation

Correct Answer

A:

Symmetric IRB uses distributed tenant routing constructs to support inter-subnet traffic over the overlay. The option uses “Use a correctly designed symmetric IRB L3 EVPN routing model” to address “traffic must route between tenant subnets while maintaining VRF isolation across VTEPs”. The result must be observed on the affected component.

Incorrect Answers

B:

“Use a CLI alias as the inter-subnet forwarding method” targets a different operation from the reported requirement: “traffic must route between tenant subnets while maintaining VRF isolation across VTEPs”. Symmetric IRB uses distributed tenant routing constructs to support inter-subnet traffic over the overlay. Use the appropriate method: Use a correctly designed symmetric IRB L3 EVPN routing model.

C:

“Require destination-VLAN bridge membership at every intermediary hop” targets a different operation from the reported requirement: “traffic must route between tenant subnets while maintaining VRF isolation across VTEPs”. Symmetric IRB uses distributed tenant routing constructs to support inter-subnet traffic over the overlay. Use the appropriate method: Use a correctly designed symmetric IRB L3 EVPN routing model.

D:

“Remove the IP-VRF and route all tenants in a single default instance” targets a different operation from the reported requirement: “traffic must route between tenant subnets while maintaining VRF isolation across VTEPs”. Symmetric IRB uses distributed tenant routing constructs to support inter-subnet traffic over the overlay. Use the appropriate method: Use a correctly designed symmetric IRB L3 EVPN routing model.

Question 142

In the fictional Harbor-1 west pod, a staged top-of-rack rollout with a bounded maintenance window, the team reports that a large route display contains noise and a specific match must be isolated. The shift handoff must specify a defensible solution and the observable service outcome. Which recommendation is technically justified?

  1. Edit a syslog file and assume the route table is filtered.
  2. Apply supported CLI filtering to narrow the displayed results.
  3. Block the route through an ACL to make it disappear.
  4. Remove the routing protocol configuration to reduce output.

Explanation

Correct Answer

B:

Output filtering changes the view without changing routing behavior. For Harbor-1, confirm the actual outcome: the filtered display includes the target entries while forwarding stays unchanged.

Incorrect Answers

A:

“Edit a syslog file and assume the route table is filtered” targets a different operation from the reported requirement: “a large route display contains noise and a specific match must be isolated”. Output filtering changes the view without changing routing behavior. Use the appropriate method: Apply supported CLI filtering to narrow the displayed results.

C:

“Block the route through an ACL to make it disappear” targets a different operation from the reported requirement: “a large route display contains noise and a specific match must be isolated”. Output filtering changes the view without changing routing behavior. Use the appropriate method: Apply supported CLI filtering to narrow the displayed results.

D:

“Remove the routing protocol configuration to reduce output” targets a different operation from the reported requirement: “a large route display contains noise and a specific match must be isolated”. Output filtering changes the view without changing routing behavior. Use the appropriate method: Apply supported CLI filtering to narrow the displayed results.

Question 143

In the fictional Canyon-5 east pod, a fabric operations audit prior to tenant onboarding, the team reports that an automation system needs structured streaming device state. The shift handoff must specify a defensible solution and the observable service outcome. Which recommendation is technically justified?

  1. Infer device counters from route-target strings.
  2. Encode syslog output as a replacement for interface state models.
  3. Use a supported gNMI subscription or retrieval interface.
  4. Run a human terminal screenshot macro as the only telemetry feed.

Explanation

Correct Answer

C:

GNMI provides a model-driven management path for configuration and telemetry. The option uses “Use a supported gNMI subscription or retrieval interface” to address “an automation system needs structured streaming device state”. The result must be observed on the affected component. Before onboarding, test that the intended fabric state exists.

Incorrect Answers

A:

“Infer device counters from route-target strings” targets a different operation from the reported requirement: “an automation system needs structured streaming device state”. GNMI provides a model-driven management path for configuration and telemetry. Use the appropriate method: Use a supported gNMI subscription or retrieval interface. Before onboarding, test that the intended fabric state exists.

B:

“Encode syslog output as a replacement for interface state models” targets a different operation from the reported requirement: “an automation system needs structured streaming device state”. GNMI provides a model-driven management path for configuration and telemetry. Use the appropriate method: Use a supported gNMI subscription or retrieval interface. Before onboarding, test that the intended fabric state exists.

D:

“Run a human terminal screenshot macro as the only telemetry feed” targets a different operation from the reported requirement: “an automation system needs structured streaming device state”. GNMI provides a model-driven management path for configuration and telemetry. Use the appropriate method: Use a supported gNMI subscription or retrieval interface. Before onboarding, test that the intended fabric state exists.

Question 144

In the fictional Atlas-7 west pod, a service recovery task following a partial path outage, the team reports that a leaf's routed BGP peering fails after peer-AS data was changed. An unrelated configuration change is being considered. Which focused remediation best addresses the described problem first?

  1. Change the syslog severity to fix the session.
  2. Create a MAC-VRF rather than verifying the neighbor.
  3. Add a VXLAN VNI to establish the underlay BGP session.
  4. Correct the neighbor addressing and peer autonomous system configuration.

Explanation

Correct Answer

D:

BGP session establishment requires consistent neighbor transport and AS expectations. For Atlas-7, confirm the actual outcome: the intended BGP neighbor is established with the correct peer identity.

Incorrect Answers

A:

“Change the syslog severity to fix the session” targets a different operation from the reported requirement: “a leaf's routed BGP peering fails after peer-AS data was changed”. BGP session establishment requires consistent neighbor transport and AS expectations. Use the appropriate method: Correct the neighbor addressing and peer autonomous system configuration. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

B:

“Create a MAC-VRF rather than verifying the neighbor” targets a different operation from the reported requirement: “a leaf's routed BGP peering fails after peer-AS data was changed”. BGP session establishment requires consistent neighbor transport and AS expectations. Use the appropriate method: Correct the neighbor addressing and peer autonomous system configuration. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

C:

“Add a VXLAN VNI to establish the underlay BGP session” targets a different operation from the reported requirement: “a leaf's routed BGP peering fails after peer-AS data was changed”. BGP session establishment requires consistent neighbor transport and AS expectations. Use the appropriate method: Correct the neighbor addressing and peer autonomous system configuration. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

Question 145

In the fictional Summit-4 west pod, a change-freeze exception for a narrow operational fault, the team reports that operations need repeatable tenant service deployment across the fabric. An unrelated configuration change is being considered. Which focused remediation best addresses the described problem first?

  1. Use EDA service-intent definitions with controlled reconciliation.
  2. Turn off remote EVPN route exchange and declare the service deployed.
  3. Use syslog text as the only authoritative tenant service configuration.
  4. Change one access VLAN manually without representing service dependencies.

Explanation

Correct Answer

A:

Service intent captures desired network service state across participating resources. For Summit-4, confirm the actual outcome: the declared service maps to the intended attachments and network instances.

Incorrect Answers

B:

“Turn off remote EVPN route exchange and declare the service deployed” targets a different operation from the reported requirement: “operations need repeatable tenant service deployment across the fabric”. Service intent captures desired network service state across participating resources. Use the appropriate method: Use EDA service-intent definitions with controlled reconciliation.

C:

“Use syslog text as the only authoritative tenant service configuration” targets a different operation from the reported requirement: “operations need repeatable tenant service deployment across the fabric”. Service intent captures desired network service state across participating resources. Use the appropriate method: Use EDA service-intent definitions with controlled reconciliation.

D:

“Change one access VLAN manually without representing service dependencies” targets a different operation from the reported requirement: “operations need repeatable tenant service deployment across the fabric”. Service intent captures desired network service state across participating resources. Use the appropriate method: Use EDA service-intent definitions with controlled reconciliation.

Question 146

In the fictional Metro-8 east pod, a multi-tenant fabric undergoing documented validation, the team reports that a remote tenant host moves to another leaf and reachability must be updated. The planned change is "Examine BGP EVPN Type 2 MAC/IP reachability advertisements." Which post-change observation best validates the intended technical behavior?

  1. Use an unrelated tenant dashboard as proof, without verifying the required evpn mac/ip reachability condition.
  2. Verify that the active remote host MAC/IP is associated with the expected VTEP.
  3. Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior.
  4. Check only that the device hostname is listed in the inventory, without examining evpn mac/ip reachability behavior.

Explanation

Correct Answer

B:

EVPN MAC/IP advertisements carry endpoint reachability information for the L2 overlay. The option uses “Verify that the active remote host MAC/IP is associated with the expected VTEP” to address “a remote tenant host moves to another leaf and reachability must be updated”. The acceptance test is: the active remote host MAC/IP is associated with the expected VTEP. Observe the relevant forwarding/control-plane behavior under the approved test.

Incorrect Answers

A:

“Use an unrelated tenant dashboard as proof, without verifying the required evpn mac/ip reachability condition” targets a different operation from the reported requirement: “a remote tenant host moves to another leaf and reachability must be updated”. EVPN MAC/IP advertisements carry endpoint reachability information for the L2 overlay. The confirming result is: the active remote host MAC/IP is associated with the expected VTEP. Observe the relevant forwarding/control-plane behavior under the approved test.

C:

“Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior” targets a different operation from the reported requirement: “a remote tenant host moves to another leaf and reachability must be updated”. EVPN MAC/IP advertisements carry endpoint reachability information for the L2 overlay. The confirming result is: the active remote host MAC/IP is associated with the expected VTEP. Observe the relevant forwarding/control-plane behavior under the approved test.

D:

“Check only that the device hostname is listed in the inventory, without examining evpn mac/ip reachability behavior” targets a different operation from the reported requirement: “a remote tenant host moves to another leaf and reachability must be updated”. EVPN MAC/IP advertisements carry endpoint reachability information for the L2 overlay. The confirming result is: the active remote host MAC/IP is associated with the expected VTEP. Observe the relevant forwarding/control-plane behavior under the approved test.

Question 147

In the fictional Pine-9 east pod, a replacement leaf with configuration review requirements, the team reports that an expanding data hall requires extra fabric path capacity without redesigning every leaf. Which engineering action best satisfies this request?

  1. Insert a single Layer 2 hub between all existing spines.
  2. Force every leaf to forward through its physical neighbor leaf.
  3. Add compatible spine capacity and attach the fabric leaves to it.
  4. Remove the routed underlay and create one broadcast domain.

Explanation

Correct Answer

C:

Adding spine capacity is a normal way to increase leaf-spine fabric path diversity. The option uses “Add compatible spine capacity and attach the fabric leaves to it” to address “an expanding data hall requires extra fabric path capacity without redesigning every leaf”. The result must be observed on the affected component. Confirm that the replacement leaf reaches the expected operational state.

Incorrect Answers

A:

“Insert a single Layer 2 hub between all existing spines” targets a different operation from the reported requirement: “an expanding data hall requires extra fabric path capacity without redesigning every leaf”. Adding spine capacity is a normal way to increase leaf-spine fabric path diversity. Use the appropriate method: Add compatible spine capacity and attach the fabric leaves to it. Confirm that the replacement leaf reaches the expected operational state.

B:

“Force every leaf to forward through its physical neighbor leaf” targets a different operation from the reported requirement: “an expanding data hall requires extra fabric path capacity without redesigning every leaf”. Adding spine capacity is a normal way to increase leaf-spine fabric path diversity. Use the appropriate method: Add compatible spine capacity and attach the fabric leaves to it. Confirm that the replacement leaf reaches the expected operational state.

D:

“Remove the routed underlay and create one broadcast domain” targets a different operation from the reported requirement: “an expanding data hall requires extra fabric path capacity without redesigning every leaf”. Adding spine capacity is a normal way to increase leaf-spine fabric path diversity. Use the appropriate method: Add compatible spine capacity and attach the fabric leaves to it. Confirm that the replacement leaf reaches the expected operational state.

Question 148

In the fictional Harbor-1 west pod, a staged top-of-rack rollout with a bounded maintenance window, the team reports that two different EVPN sources can advertise otherwise identical service prefixes. The shift handoff must specify a defensible solution and the observable service outcome. Which recommendation is technically justified?

  1. Remove all identifiers to force unique route origin tracking.
  2. Use an interface ACL sequence number as a VPN route key.
  3. Use a route target as the only globally unique origin identifier.
  4. Assign appropriate route distinguishers so VPN routes have distinct identities.

Explanation

Correct Answer

D:

A route distinguisher contributes VPN route uniqueness and is separate from import policy. For Harbor-1, confirm the actual outcome: distinct route sources maintain distinguishable VPN route keys.

Incorrect Answers

A:

“Remove all identifiers to force unique route origin tracking” targets a different operation from the reported requirement: “two different EVPN sources can advertise otherwise identical service prefixes”. A route distinguisher contributes VPN route uniqueness and is separate from import policy. Use the appropriate method: Assign appropriate route distinguishers so VPN routes have distinct identities.

B:

“Use an interface ACL sequence number as a VPN route key” targets a different operation from the reported requirement: “two different EVPN sources can advertise otherwise identical service prefixes”. A route distinguisher contributes VPN route uniqueness and is separate from import policy. Use the appropriate method: Assign appropriate route distinguishers so VPN routes have distinct identities.

C:

“Use a route target as the only globally unique origin identifier” targets a different operation from the reported requirement: “two different EVPN sources can advertise otherwise identical service prefixes”. A route distinguisher contributes VPN route uniqueness and is separate from import policy. Use the appropriate method: Assign appropriate route distinguishers so VPN routes have distinct identities.

Question 149

In the fictional Canyon-5 east pod, a fabric operations audit prior to tenant onboarding, the team reports that the same tenant MAC oscillates between attachments and causes instability. The planned change is "Inspect and apply the MAC move controls and investigate the attachment loop." Which post-change observation best validates the intended technical behavior?

  1. Verify that MAC learning stabilizes on the intended attachment without recurrent move alarms.
  2. Use an unrelated tenant dashboard as proof, without verifying the required mac movement protection condition.
  3. Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior.
  4. Check only that the device hostname is listed in the inventory, without examining mac movement protection behavior.

Explanation

Correct Answer

A:

MAC move visibility and controls address repeated endpoint relocation or loops in a bridge instance. The option uses “Verify that MAC learning stabilizes on the intended attachment without recurrent move alarms” to address “the same tenant MAC oscillates between attachments and causes instability”. The acceptance test is: MAC learning stabilizes on the intended attachment without recurrent move alarms. Before onboarding, test that the intended fabric state exists.

Incorrect Answers

B:

“Use an unrelated tenant dashboard as proof, without verifying the required mac movement protection condition” targets a different operation from the reported requirement: “the same tenant MAC oscillates between attachments and causes instability”. MAC move visibility and controls address repeated endpoint relocation or loops in a bridge instance. The confirming result is: MAC learning stabilizes on the intended attachment without recurrent move alarms. Before onboarding, test that the intended fabric state exists.

C:

“Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior” targets a different operation from the reported requirement: “the same tenant MAC oscillates between attachments and causes instability”. MAC move visibility and controls address repeated endpoint relocation or loops in a bridge instance. The confirming result is: MAC learning stabilizes on the intended attachment without recurrent move alarms. Before onboarding, test that the intended fabric state exists.

D:

“Check only that the device hostname is listed in the inventory, without examining mac movement protection behavior” targets a different operation from the reported requirement: “the same tenant MAC oscillates between attachments and causes instability”. MAC move visibility and controls address repeated endpoint relocation or loops in a bridge instance. The confirming result is: MAC learning stabilizes on the intended attachment without recurrent move alarms. Before onboarding, test that the intended fabric state exists.

Question 150

In the fictional Metro-8 west pod, a multi-tenant fabric undergoing documented validation, the team reports that two tenant Layer 2 segments need extension across a routed IP fabric. An unrelated configuration change is being considered. Which focused remediation best addresses the described problem first?

  1. Route raw Ethernet frames as unencapsulated IP datagrams.
  2. Use VXLAN encapsulation between reachable VTEPs.
  3. Use BGP alone as the packet data tunnel.
  4. Make all physical spine links carry the tenant access VLAN.

Explanation

Correct Answer

B:

VXLAN carries tenant frames inside outer IP/UDP transport across the routed fabric. For Metro-8, confirm the actual outcome: packet traces show VXLAN encapsulation between the expected VTEPs.

Incorrect Answers

A:

“Route raw Ethernet frames as unencapsulated IP datagrams” targets a different operation from the reported requirement: “two tenant Layer 2 segments need extension across a routed IP fabric”. VXLAN carries tenant frames inside outer IP/UDP transport across the routed fabric. Use the appropriate method: Use VXLAN encapsulation between reachable VTEPs. Observe the relevant forwarding/control-plane behavior under the approved test.

C:

“Use BGP alone as the packet data tunnel” targets a different operation from the reported requirement: “two tenant Layer 2 segments need extension across a routed IP fabric”. VXLAN carries tenant frames inside outer IP/UDP transport across the routed fabric. Use the appropriate method: Use VXLAN encapsulation between reachable VTEPs. Observe the relevant forwarding/control-plane behavior under the approved test.

D:

“Make all physical spine links carry the tenant access VLAN” targets a different operation from the reported requirement: “two tenant Layer 2 segments need extension across a routed IP fabric”. VXLAN carries tenant frames inside outer IP/UDP transport across the routed fabric. Use the appropriate method: Use VXLAN encapsulation between reachable VTEPs. Observe the relevant forwarding/control-plane behavior under the approved test.

Nokia Data Center Fabric Fundamentals (4A0-D01) Practice Tests