mcAfee Secure Website
exam =5
exam =6

Exam Code: NSE4_FGT_AD-7.6

Exam Name: Fortinet NSE 4 - FortiOS 7.6 Administrator

Certification Provider: Fortinet

Corresponding Certification: NSE4

Fortinet NSE4_FGT_AD-7.6 Questions & Answers

Reliable & Actual Study Materials for NSE4_FGT_AD-7.6 Exam Success

94 Questions & Answers with Testing Engine

"NSE4_FGT_AD-7.6: Fortinet NSE 4 - FortiOS 7.6 Administrator" Testing Engine covers all the knowledge points of the real Fortinet NSE4_FGT_AD-7.6 exam.

The latest actual NSE4_FGT_AD-7.6 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at NSE4_FGT_AD-7.6 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Fortinet Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Fortinet NSE4_FGT_AD-7.6 Practice Test 55

Question 540

An IPsec deployment uses pre-shared key authentication and IKE identities. The administrator observes that the administrator assumes PSK proves the corporate server identity in a strong third-party trust model. What should the engineer investigate or verify?

  1. Coordinate the new PSK on both ends during a change window
  2. Use unique strong PSKs and scoped peer definitions for each partner
  3. Evaluate supported certificate-based IKE peer authentication for that trust requirement
  4. Verify FQDN/DDNS gateway resolution and the Phase 1 remote gateway definition

Explanation

Correct Answer

C:

Evaluate supported certificate-based IKE peer authentication for that trust requirement is the best response. Certificates can bind peers to a verified PKI identity rather than a shared password alone.

Incorrect Answers

A:

Coordinate the new PSK on both ends during a change window is useful when a provider rotates the pre-shared key on one FortiGate only. Both endpoints must use the same authentication secret for the negotiated peer.

B:

Use unique strong PSKs and scoped peer definitions for each partner addresses a different symptom: a site uses the same PSK for every unrelated partner tunnel. Separate secrets limit the impact of one exposed tunnel credential.

D:

Verify FQDN/DDNS gateway resolution and the Phase 1 remote gateway definition is useful when a tunnel initiator is configured with a wrong remote peer IP but a valid name. Peer reachability depends on resolving and targeting the configured endpoint.

Question 541

A network team uses certificate-based authentication for an IPsec partner. A post-change test indicates that the peer's certificate chains to an untrusted CA on the FortiGate. What should the administrator do to address the stated condition?

  1. Renew the proper certificate and validate its new validity period
  2. Configure matching peer identity verification criteria for the certificate
  3. Import and trust the authorized peer-issuing CA chain for IKE verification
  4. Enforce the supported certificate revocation validation policy and update trust data

Explanation

Correct Answer

C:

Choose import and trust the authorized peer-issuing CA chain for IKE verification. Certificate authentication needs a valid issuer trust path. Verify the named control at the affected interface, identity, route, or session boundary.

Incorrect Answers

A:

Renew the proper certificate and validate its new validity period is useful when an IKE certificate expires and the previously working tunnel stops authenticating. Expired credentials cannot establish a valid certificate-authenticated IKE SA.

B:

Configure matching peer identity verification criteria for the certificate addresses a different symptom: the remote IKE identity does not match the subject or SAN expected by the partner. Certificate trust and expected peer name are distinct validation checks.

D:

Enforce the supported certificate revocation validation policy and update trust data is useful when a revoked partner certificate is still accepted during negotiation. Issuer trust alone does not establish that a certificate remains authorized.

Question 542

A network team uses certificate-based authentication for an IPsec partner. The team reports that the remote IKE identity does not match the subject or SAN expected by the partner. Which action best meets the stated requirement?

  1. Renew the proper certificate and validate its new validity period
  2. Use the complete valid local certificate and private-key association
  3. Import and trust the authorized peer-issuing CA chain for IKE verification
  4. Configure matching peer identity verification criteria for the certificate

Explanation

Correct Answer

D:

The appropriate control is to configure matching peer identity verification criteria for the certificate. Certificate trust and expected peer name are distinct validation checks.

Incorrect Answers

A:

Renew the proper certificate and validate its new validity period addresses a different symptom: an IKE certificate expires and the previously working tunnel stops authenticating. Expired credentials cannot establish a valid certificate-authenticated IKE SA.

B:

Use the complete valid local certificate and private-key association is relevant when the FortiGate tries to send a certificate without access to its private signing key. IKE authentication requires proof of possession of the certificate's private key.

C:

Import and trust the authorized peer-issuing CA chain for IKE verification is useful when the peer's certificate chains to an untrusted CA on the FortiGate. Certificate authentication needs a valid issuer trust path.

Question 543

A network team uses certificate-based authentication for an IPsec partner. In the effective configuration, an IKE certificate expires and the previously working tunnel stops authenticating. What is the most appropriate next step?

  1. Renew the proper certificate and validate its new validity period
  2. Import and trust the authorized peer-issuing CA chain for IKE verification
  3. Use the complete valid local certificate and private-key association
  4. Configure matching peer identity verification criteria for the certificate

Explanation

Correct Answer

A:

Renew the proper certificate and validate its new validity period directly addresses the requirement. Expired credentials cannot establish a valid certificate-authenticated IKE SA.

Incorrect Answers

B:

Import and trust the authorized peer-issuing CA chain for IKE verification is useful when the peer's certificate chains to an untrusted CA on the FortiGate. Certificate authentication needs a valid issuer trust path.

C:

Use the complete valid local certificate and private-key association addresses a different symptom: the FortiGate tries to send a certificate without access to its private signing key. IKE authentication requires proof of possession of the certificate's private key.

D:

Configure matching peer identity verification criteria for the certificate is relevant when the remote IKE identity does not match the subject or SAN expected by the partner. Certificate trust and expected peer name are distinct validation checks.

Question 544

A network team uses certificate-based authentication for an IPsec partner. The current operating problem is that the FortiGate tries to send a certificate without access to its private signing key. Which control most directly addresses the observed gap?

  1. Renew the proper certificate and validate its new validity period
  2. Use the complete valid local certificate and private-key association
  3. Configure matching peer identity verification criteria for the certificate
  4. Import and trust the authorized peer-issuing CA chain for IKE verification

Explanation

Correct Answer

B:

Use the complete valid local certificate and private-key association is the best response. IKE authentication requires proof of possession of the certificate's private key.

Incorrect Answers

A:

Renew the proper certificate and validate its new validity period is useful when an IKE certificate expires and the previously working tunnel stops authenticating. Expired credentials cannot establish a valid certificate-authenticated IKE SA.

C:

Configure matching peer identity verification criteria for the certificate is relevant when the remote IKE identity does not match the subject or SAN expected by the partner. Certificate trust and expected peer name are distinct validation checks.

D:

Import and trust the authorized peer-issuing CA chain for IKE verification is useful when the peer's certificate chains to an untrusted CA on the FortiGate. Certificate authentication needs a valid issuer trust path.

Question 545

A network team uses certificate-based authentication for an IPsec partner. An incident review establishes that a revoked partner certificate is still accepted during negotiation. Which response is most effective for this case?

  1. Import and trust the authorized peer-issuing CA chain for IKE verification
  2. Configure matching peer identity verification criteria for the certificate
  3. Renew the proper certificate and validate its new validity period
  4. Enforce the supported certificate revocation validation policy and update trust data

Explanation

Correct Answer

D:

Choose enforce the supported certificate revocation validation policy and update trust data. Issuer trust alone does not establish that a certificate remains authorized. Verify the named control at the affected interface, identity, route, or session boundary.

Incorrect Answers

A:

Import and trust the authorized peer-issuing CA chain for IKE verification addresses a different symptom: the peer's certificate chains to an untrusted CA on the FortiGate. Certificate authentication needs a valid issuer trust path.

B:

Configure matching peer identity verification criteria for the certificate is relevant when the remote IKE identity does not match the subject or SAN expected by the partner. Certificate trust and expected peer name are distinct validation checks.

C:

Renew the proper certificate and validate its new validity period is useful when an IKE certificate expires and the previously working tunnel stops authenticating. Expired credentials cannot establish a valid certificate-authenticated IKE SA.

Question 546

A branch uses Dead Peer Detection on a route-based IPsec VPN. The observed symptom is that a dead remote peer leaves the tunnel apparently available and traffic blackholes. Which action best meets the stated requirement?

  1. Use an appropriate auto-negotiate or keepalive design if an always-ready SA is required
  2. Configure and validate Dead Peer Detection for the intended tunnel
  3. Inspect DPD and IKE negotiation events separately from static routing
  4. Review DPD timers and retransmission behavior against measured connectivity

Explanation

Correct Answer

B:

The appropriate control is to configure and validate Dead Peer Detection for the intended tunnel. DPD determines whether the IKE peer is still responsive and can trigger cleanup.

Incorrect Answers

A:

Use an appropriate auto-negotiate or keepalive design if an always-ready SA is required addresses a different symptom: a partner VPN has no relevant traffic but on-demand negotiation leaves Phase 2 idle. On-demand SAs may remain inactive until matching protected traffic arrives.

C:

Inspect DPD and IKE negotiation events separately from static routing is useful when operators assume a down tunnel implies a missed routing update only. Peer liveness failures and route installation are distinct incident causes.

D:

Review DPD timers and retransmission behavior against measured connectivity addresses a different symptom: DPD triggers constantly during brief planned link jitter and causes unnecessary renegotiation. Overly aggressive peer liveness checks can destabilize a marginal path.

Question 547

A branch uses Dead Peer Detection on a route-based IPsec VPN. A post-change test indicates that DPD triggers constantly during brief planned link jitter and causes unnecessary renegotiation. Which next step most directly addresses the reported evidence?

  1. Check IKE DPD state alongside encrypted application reachability
  2. Configure and validate Dead Peer Detection for the intended tunnel
  3. Review DPD timers and retransmission behavior against measured connectivity
  4. Use an appropriate auto-negotiate or keepalive design if an always-ready SA is required

Explanation

Correct Answer

C:

Review DPD timers and retransmission behavior against measured connectivity directly addresses the requirement. Overly aggressive peer liveness checks can destabilize a marginal path.

Incorrect Answers

A:

Check IKE DPD state alongside encrypted application reachability is relevant when the team tests peer liveness only by pinging an internal server. A remote host's ICMP policy can mislead an otherwise healthy VPN liveness assessment.

B:

Configure and validate Dead Peer Detection for the intended tunnel is useful when a dead remote peer leaves the tunnel apparently available and traffic blackholes. DPD determines whether the IKE peer is still responsive and can trigger cleanup.

D:

Use an appropriate auto-negotiate or keepalive design if an always-ready SA is required is relevant when a partner VPN has no relevant traffic but on-demand negotiation leaves Phase 2 idle. On-demand SAs may remain inactive until matching protected traffic arrives.

Question 548

A branch uses Dead Peer Detection on a route-based IPsec VPN. The team reports that operators assume a down tunnel implies a missed routing update only. What should the engineer investigate or verify?

  1. Check IKE DPD state alongside encrypted application reachability
  2. Use an appropriate auto-negotiate or keepalive design if an always-ready SA is required
  3. Inspect DPD and IKE negotiation events separately from static routing
  4. Configure and validate Dead Peer Detection for the intended tunnel

Explanation

Correct Answer

C:

Inspect DPD and IKE negotiation events separately from static routing is the best response. Peer liveness failures and route installation are distinct incident causes.

Incorrect Answers

A:

Check IKE DPD state alongside encrypted application reachability is useful when the team tests peer liveness only by pinging an internal server. A remote host's ICMP policy can mislead an otherwise healthy VPN liveness assessment.

B:

Use an appropriate auto-negotiate or keepalive design if an always-ready SA is required addresses a different symptom: a partner VPN has no relevant traffic but on-demand negotiation leaves Phase 2 idle. On-demand SAs may remain inactive until matching protected traffic arrives.

D:

Configure and validate Dead Peer Detection for the intended tunnel is useful when a dead remote peer leaves the tunnel apparently available and traffic blackholes. DPD determines whether the IKE peer is still responsive and can trigger cleanup.

Question 549

A branch uses Dead Peer Detection on a route-based IPsec VPN. In the effective configuration, a partner VPN has no relevant traffic but on-demand negotiation leaves Phase 2 idle. Which response is most effective for this case?

  1. Inspect DPD and IKE negotiation events separately from static routing
  2. Review DPD timers and retransmission behavior against measured connectivity
  3. Use an appropriate auto-negotiate or keepalive design if an always-ready SA is required
  4. Configure and validate Dead Peer Detection for the intended tunnel

Explanation

Correct Answer

C:

Choose use an appropriate auto-negotiate or keepalive design if an always-ready SA is required. On-demand SAs may remain inactive until matching protected traffic arrives.

Incorrect Answers

A:

Inspect DPD and IKE negotiation events separately from static routing addresses a different symptom: operators assume a down tunnel implies a missed routing update only. Peer liveness failures and route installation are distinct incident causes.

B:

Review DPD timers and retransmission behavior against measured connectivity is relevant when DPD triggers constantly during brief planned link jitter and causes unnecessary renegotiation. Overly aggressive peer liveness checks can destabilize a marginal path.

D:

Configure and validate Dead Peer Detection for the intended tunnel addresses a different symptom: a dead remote peer leaves the tunnel apparently available and traffic blackholes. DPD determines whether the IKE peer is still responsive and can trigger cleanup.

Question 550

A branch uses Dead Peer Detection on a route-based IPsec VPN. The current operating problem is that the team tests peer liveness only by pinging an internal server. Which response best fits the observed symptoms?

  1. Check IKE DPD state alongside encrypted application reachability
  2. Inspect DPD and IKE negotiation events separately from static routing
  3. Review DPD timers and retransmission behavior against measured connectivity
  4. Use an appropriate auto-negotiate or keepalive design if an always-ready SA is required

Explanation

Correct Answer

A:

The appropriate control is to check IKE DPD state alongside encrypted application reachability. A remote host's ICMP policy can mislead an otherwise healthy VPN liveness assessment.

Incorrect Answers

B:

Inspect DPD and IKE negotiation events separately from static routing is useful when operators assume a down tunnel implies a missed routing update only. Peer liveness failures and route installation are distinct incident causes.

C:

Review DPD timers and retransmission behavior against measured connectivity addresses a different symptom: DPD triggers constantly during brief planned link jitter and causes unnecessary renegotiation. Overly aggressive peer liveness checks can destabilize a marginal path.

D:

Use an appropriate auto-negotiate or keepalive design if an always-ready SA is required is relevant when a partner VPN has no relevant traffic but on-demand negotiation leaves Phase 2 idle. On-demand SAs may remain inactive until matching protected traffic arrives.

Fortinet NSE 4 - FortiOS 7.6 Administrator (NSE4_FGT_AD-7.6) Practice Tests