mcAfee Secure Website
exam =5
exam =6

Exam Code: 800-150

Exam Name: Supporting Cisco Devices for Field Technicians

Certification Provider: Cisco

Cisco 800-150 Questions & Answers

Reliable & Actual Study Materials for 800-150 Exam Success

100 Questions & Answers with Testing Engine

"800-150: Supporting Cisco Devices for Field Technicians" Testing Engine covers all the knowledge points of the real Cisco 800-150 exam.

The latest actual 800-150 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at 800-150 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Cisco Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Cisco 800-150 Practice Test 55

Question 540

Colocation site RMA handoff. Field report: A floor needs to connect many copper Ethernet endpoints within one local LAN. The shift lead must choose a return-to-service note for this ticket. Which handoff is technically adequate?

  1. Close after recording “Deploy a router with one WAN port as the user-port fanout” without checking that endpoints link to the planned access VLAN and reach their gateway.
  2. Perform or retain the approved action: install an access switch with adequate ports and uplink capacity; document evidence that endpoints link to the planned access VLAN and reach their gateway.
  3. Defer service verification after “Install a wireless controller without access switches” until the next reported incident.
  4. Apply “Use a firewall interface for every user workstation” as a substitute and declare success from shipment receipt alone.

Explanation

Correct Answer

B:

This handoff preserves the required corrective action and the verifiable service outcome. An access switch supplies many Layer 2 edge ports and learns local MAC destinations. Recording that endpoints link to the planned access VLAN and reach their gateway makes the signoff testable.

Incorrect Answers

A:

This proposes a different action with no acceptance evidence. “Deploy a router with one WAN port as the user-port fanout” cannot replace the validated measure that endpoints link to the planned access VLAN and reach their gateway.

C:

A future incident is not a reasonable acceptance gate for a known problem. “Install a wireless controller without access switches” is not evidence that endpoints link to the planned access VLAN and reach their gateway.

D:

Delivery paperwork describes logistics, not recovered functionality. “Use a firewall interface for every user workstation” leaves the technical requirement and its validation unresolved.

Question 541

Remote office replacement window. Field report: A modular Catalyst switch requires a replacement line card after a hardware fault. A colleague proposes: “Insert any line card with a similar faceplate regardless of supported chassis.” Which technical assessment is best supported?

  1. The proposed shortcut is sufficient because copy another device's serial number to make an incompatible card pass inventory.
  2. There is no need to validate the reported dependency once change the switch vlan name to create a missing hardware port.
  3. The proposal overlooks the reported dependency: Supported FRU compatibility is determined by chassis/module documentation.
  4. The original problem can be treated as resolved from inventory labels alone, without checking catalyst line-card sku behavior.

Explanation

Correct Answer

C:

The alternative does not address the actual reported dependency. Supported FRU compatibility is determined by chassis/module documentation. The supported intervention is match platform slot, pid, revision and feature support for the replacement line card; acceptance should show that compatible PID and the card reports online in its assigned slot.

Incorrect Answers

A:

The proposed step “Copy another device's serial number to make an incompatible card pass inventory” is not the required mechanism.

B:

It assumes an unrelated action establishes service recovery. Nothing about “Change the switch VLAN name to create a missing hardware port” demonstrates whether compatible PID and the card reports online in its assigned slot.

D:

The failure described in the field report requires a functional check that compatible PID and the card reports online in its assigned slot.

Question 542

Disaster-recovery facility inspection. Field report: Support requests a baseline before a chassis replacement. The shift lead must choose a return-to-service note for this ticket. Which handoff is technically adequate?

  1. Close after recording “Delete the old configuration as a first evidence-gathering step” without checking that baseline evidence is time-stamped and tied to the old device ID.
  2. Defer service verification after “Rely on a memory of last week's link state” until the next reported incident.
  3. Apply “Capture only the new chassis model name after the swap” as a substitute and declare success from shipment receipt alone.
  4. Perform or retain the approved action: collect approved configuration, interface, version, inventory and logs before shutdown; document evidence that baseline evidence is time-stamped and tied to the old device ID.

Explanation

Correct Answer

D:

This handoff preserves the required corrective action and the verifiable service outcome. A multi-part prechange baseline supports restoration and meaningful postchange comparison. Recording that baseline evidence is time-stamped and tied to the old device ID makes the signoff testable.

Incorrect Answers

A:

This proposes a different action with no acceptance evidence. “Delete the old configuration as a first evidence-gathering step” cannot replace the validated measure that baseline evidence is time-stamped and tied to the old device ID.

B:

A future incident is not a reasonable acceptance gate for a known problem. “Rely on a memory of last week's link state” is not evidence that baseline evidence is time-stamped and tied to the old device ID.

C:

Delivery paperwork describes logistics, not recovered functionality. “Capture only the new chassis model name after the swap” leaves the technical requirement and its validation unresolved.

Question 543

Main campus hardware-service ticket. Field report: An edge router has a default route and a more specific route for an internal subnet. The approved intervention is complete. What observation provides the strongest technical acceptance evidence?

  1. Demonstrate that the forwarding path uses the expected next hop for that prefix.
  2. Confirm only that the work ticket says “completed,” without testing longest-prefix routing.
  3. Confirm only that the technician attempted: choose the oldest route entry irrespective of mask specificity.
  4. Confirm the site inventory list still contains the hostname, without validating the reported service.

Explanation

Correct Answer

A:

The forwarding path uses the expected next hop for that prefix. IP forwarding normally selects the most specific matching route in the forwarding table.

Incorrect Answers

B:

Check whether the forwarding path uses the expected next hop for that prefix.

C:

For example, “Choose the oldest route entry irrespective of mask specificity” does not demonstrate the corrected technical state.

D:

Confirm that the forwarding path uses the expected next hop for that prefix.

Question 544

Regional north-campus service window. Field report: A packet capture shows IP packets carried inside Ethernet frames on the wire. The shift lead must choose a return-to-service note for this ticket. Which handoff is technically adequate?

  1. Close after recording “Treat TCP application payload as the physical cable encoding” without checking that captured Ethernet frames contain the expected EtherType and IP packet.
  2. Perform or retain the approved action: interpret ethernet headers as the local link encapsulation around ip; document evidence that captured Ethernet frames contain the expected EtherType and IP packet.
  3. Defer service verification after “Assume an IP packet contains no Layer 2 envelope on a LAN” until the next reported incident.
  4. Apply “Expect switch forwarding to remove the IP header at every hop” as a substitute and declare success from shipment receipt alone.

Explanation

Correct Answer

B:

This handoff preserves the required corrective action and the verifiable service outcome. Ethernet supplies link-layer framing while IP carries inter-network addressing. Recording that captured Ethernet frames contain the expected EtherType and IP packet makes the signoff testable.

Incorrect Answers

A:

This proposes a different action with no acceptance evidence. “Treat TCP application payload as the physical cable encoding” cannot replace the validated measure that captured Ethernet frames contain the expected EtherType and IP packet.

C:

A future incident is not a reasonable acceptance gate for a known problem. “Assume an IP packet contains no Layer 2 envelope on a LAN” is not evidence that captured Ethernet frames contain the expected EtherType and IP packet.

D:

Delivery paperwork describes logistics, not recovered functionality. “Expect switch forwarding to remove the IP header at every hop” leaves the technical requirement and its validation unresolved.

Question 545

Customer branch-site maintenance. Field report: A replacement room system connects to meetings but the far end sees no video. A colleague proposes: “Assume a microphone level meter validates camera signaling.” Which technical assessment is best supported?

  1. The proposed shortcut is sufficient because reset every campus access switch before checking local camera connection.
  2. There is no need to validate the reported dependency once rename a dhcp pool to create a missing video input.
  3. The proposal overlooks the reported dependency: Camera hardware and media settings are distinct from call connectivity.
  4. The original problem can be treated as resolved from inventory labels alone, without checking room camera path behavior.

Explanation

Correct Answer

C:

The alternative does not address the actual reported dependency. Camera hardware and media settings are distinct from call connectivity. The supported intervention is inspect camera source selection, cable and video media negotiation; acceptance should show that selected camera output reaches a remote test participant.

Incorrect Answers

A:

The proposed step “Reset every campus access switch before checking local camera connection” is not the required mechanism.

B:

It assumes an unrelated action establishes service recovery. Nothing about “Rename a DHCP pool to create a missing video input” demonstrates whether selected camera output reaches a remote test participant.

D:

The failure described in the field report requires a functional check that selected camera output reaches a remote test participant.

Question 546

Primary data-center night shift. Field report: A branch ISR router has a failing interface module and limited spare slots. The shift lead must choose a return-to-service note for this ticket. Which handoff is technically adequate?

  1. Close after recording “Install an MDS Fibre Channel line card into the ISR” without checking that the module is recognized and branch WAN connectivity is restored.
  2. Apply “Assume a universal PCI card works in all ISR module bays” as a substitute and declare success from shipment receipt alone.
  3. Defer service verification after “Swap the WAN IP address onto an unused console port” until the next reported incident.
  4. Perform or retain the approved action: choose an approved isr network interface module for the exact model and slot; document evidence that the module is recognized and branch WAN connectivity is restored.

Explanation

Correct Answer

D:

This handoff preserves the required corrective action and the verifiable service outcome. ISR interface modules have explicit supported chassis and slot requirements. Recording that the module is recognized and branch WAN connectivity is restored makes the signoff testable.

Incorrect Answers

A:

This proposes a different action with no acceptance evidence. “Install an MDS Fibre Channel line card into the ISR” cannot replace the validated measure that the module is recognized and branch WAN connectivity is restored.

B:

Delivery paperwork describes logistics, not recovered functionality. “Assume a universal PCI card works in all ISR module bays” leaves the technical requirement and its validation unresolved.

C:

A future incident is not a reasonable acceptance gate for a known problem. “Swap the WAN IP address onto an unused console port” is not evidence that the module is recognized and branch WAN connectivity is restored.

Question 547

Headquarters wiring-closet visit. Field report: A phone stays registered but calls exhibit jitter after an uplink congestion event. The shift lead must choose a return-to-service note for this ticket. Which handoff is technically adequate?

  1. Perform or retain the approved action: examine packet loss, latency and voice qos treatment along the media path; document evidence that packet-loss and jitter metrics improve during real test calls.
  2. Close after recording “Assume registration proves audio packets meet timing requirements” without checking that packet-loss and jitter metrics improve during real test calls.
  3. Defer service verification after “Reissue the switch inventory list as the sole QoS repair” until the next reported incident.
  4. Apply “Change phone ring tones to reduce network jitter” as a substitute and declare success from shipment receipt alone.

Explanation

Correct Answer

A:

This handoff preserves the required corrective action and the verifiable service outcome. Real-time voice quality depends on packet delivery characteristics beyond registration. Recording that packet-loss and jitter metrics improve during real test calls makes the signoff testable.

Incorrect Answers

B:

This proposes a different action with no acceptance evidence. “Assume registration proves audio packets meet timing requirements” cannot replace the validated measure that packet-loss and jitter metrics improve during real test calls.

C:

A future incident is not a reasonable acceptance gate for a known problem. “Reissue the switch inventory list as the sole QoS repair” is not evidence that packet-loss and jitter metrics improve during real test calls.

D:

Delivery paperwork describes logistics, not recovered functionality. “Change phone ring tones to reduce network jitter” leaves the technical requirement and its validation unresolved.

Question 548

Colocation site RMA handoff. Field report: A spare switch needs a validated baseline configuration with different hardware port layout. The approved intervention is complete. What observation provides the strongest technical acceptance evidence?

  1. Confirm the site inventory list still contains the hostname, without validating the reported service.
  2. Demonstrate that the restored device implements approved settings and operational ports.
  3. Confirm only that the technician attempted: copy the old chassis serial number into new device flash.
  4. Confirm only that the work ticket says “completed,” without testing restore config safely.

Explanation

Correct Answer

B:

The restored device implements approved settings and operational ports. Interface mappings and feature support may differ between hardware versions.

Incorrect Answers

A:

Confirm that the restored device implements approved settings and operational ports.

C:

For example, “Copy the old chassis serial number into new device flash” does not demonstrate the corrected technical state.

D:

Check whether the restored device implements approved settings and operational ports.

Question 549

Remote office replacement window. Field report: A Nexus chassis detects a card but faults its slot. The shift lead must choose a return-to-service note for this ticket. Which handoff is technically adequate?

  1. Defer service verification after “Disable environmental monitoring and accept module insertion” until the next reported incident.
  2. Close after recording “Assume `show ip route` alone determines line-card thermal health” without checking that correct module model, status and diagnostics in its slot.
  3. Perform or retain the approved action: inspect `show module` or supported module-health output before service; document evidence that correct module model, status and diagnostics in its slot.
  4. Apply “Change the device's DNS domain to clear slot faults” as a substitute and declare success from shipment receipt alone.

Explanation

Correct Answer

C:

This handoff preserves the required corrective action and the verifiable service outcome. Module inventory and health reports distinguish supported insertion from a failed FRU. Recording that correct module model, status and diagnostics in its slot makes the signoff testable.

Incorrect Answers

A:

A future incident is not a reasonable acceptance gate for a known problem. “Disable environmental monitoring and accept module insertion” is not evidence that correct module model, status and diagnostics in its slot.

B:

This proposes a different action with no acceptance evidence. “Assume `show ip route` alone determines line-card thermal health” cannot replace the validated measure that correct module model, status and diagnostics in its slot.

D:

Delivery paperwork describes logistics, not recovered functionality. “Change the device's DNS domain to clear slot faults” leaves the technical requirement and its validation unresolved.

Question 550

Disaster-recovery facility inspection. Field report: A newly activated IOS XE build has passed acceptance checks but is not committed. The approved intervention is complete. What observation provides the strongest technical acceptance evidence?

  1. Confirm only that the work ticket says “completed,” without testing install commit stage.
  2. Confirm only that the technician attempted: treat `show clock` as proof the install is committed.
  3. Confirm the site inventory list still contains the hostname, without validating the reported service.
  4. Demonstrate that installed state is committed and remains correct after approved validation.

Explanation

Correct Answer

D:

Installed state is committed and remains correct after approved validation. Commit records the selected active software state for persistence across reload.

Incorrect Answers

A:

Check whether installed state is committed and remains correct after approved validation.

B:

For example, “Treat `show clock` as proof the install is committed” does not demonstrate the corrected technical state.

C:

Confirm that installed state is committed and remains correct after approved validation.

Supporting Cisco Devices for Field Technicians (800-150) Practice Tests