mcAfee Secure Website
exam =5
exam =6

Exam Code: 4A0-D01

Exam Name: Nokia Data Center Fabric Fundamentals

Certification Provider: Nokia

Nokia 4A0-D01 Questions & Answers

Reliable & Actual Study Materials for 4A0-D01 Exam Success

61 Questions & Answers with Testing Engine

"4A0-D01: Nokia Data Center Fabric Fundamentals" Testing Engine covers all the knowledge points of the real Nokia 4A0-D01 exam.

The latest actual 4A0-D01 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at 4A0-D01 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Nokia Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Nokia 4A0-D01 Practice Test 67

Question 660

In the fictional Ridge-2 west pod, a secondary data hall with tenant isolation requirements, the team reports that a leaf's routed BGP peering fails after peer-AS data was changed. A peer suggested: "Add a VXLAN VNI to establish the underlay BGP session" That did not solve the constraint. What should be chosen instead?

  1. Change the syslog severity to fix the session.
  2. Add a VXLAN VNI to establish the underlay BGP session.
  3. Create a MAC-VRF rather than verifying the neighbor.
  4. Correct the neighbor addressing and peer autonomous system configuration.

Explanation

Correct Answer

D:

BGP session establishment requires consistent neighbor transport and AS expectations. The option uses “Correct the neighbor addressing and peer autonomous system configuration” to address “a leaf's routed BGP peering fails after peer-AS data was changed”. The result must be observed on the affected component.

Incorrect Answers

A:

“Change the syslog severity to fix the session” targets a different operation from the reported requirement: “a leaf's routed BGP peering fails after peer-AS data was changed”. BGP session establishment requires consistent neighbor transport and AS expectations. Use the appropriate method: Correct the neighbor addressing and peer autonomous system configuration.

B:

“Add a VXLAN VNI to establish the underlay BGP session” targets a different operation from the reported requirement: “a leaf's routed BGP peering fails after peer-AS data was changed”. BGP session establishment requires consistent neighbor transport and AS expectations. Use the appropriate method: Correct the neighbor addressing and peer autonomous system configuration.

C:

“Create a MAC-VRF rather than verifying the neighbor” targets a different operation from the reported requirement: “a leaf's routed BGP peering fails after peer-AS data was changed”. BGP session establishment requires consistent neighbor transport and AS expectations. Use the appropriate method: Correct the neighbor addressing and peer autonomous system configuration.

Question 661

In the fictional Ridge-2 west pod, a secondary data hall with tenant isolation requirements, the team reports that an intermittent EVPN event requires a chronological evidence trail. The shift handoff must specify a defensible solution and the observable service outcome. Which recommendation is technically justified?

  1. Inspect SR Linux operational logs with relevant timestamps and components.
  2. Modify route-target values to create a log history.
  3. Assume a single ping reproduces the entire event sequence.
  4. Use a hostname change as a timestamp correlation technique.

Explanation

Correct Answer

A:

Logs provide timestamped operational context that can be correlated with state changes. For Ridge-2, confirm the actual outcome: logged events align with the observed incident window and relevant component.

Incorrect Answers

B:

“Modify route-target values to create a log history” targets a different operation from the reported requirement: “an intermittent EVPN event requires a chronological evidence trail”. Logs provide timestamped operational context that can be correlated with state changes. Use the appropriate method: Inspect SR Linux operational logs with relevant timestamps and components.

C:

“Assume a single ping reproduces the entire event sequence” targets a different operation from the reported requirement: “an intermittent EVPN event requires a chronological evidence trail”. Logs provide timestamped operational context that can be correlated with state changes. Use the appropriate method: Inspect SR Linux operational logs with relevant timestamps and components.

D:

“Use a hostname change as a timestamp correlation technique” targets a different operation from the reported requirement: “an intermittent EVPN event requires a chronological evidence trail”. Logs provide timestamped operational context that can be correlated with state changes. Use the appropriate method: Inspect SR Linux operational logs with relevant timestamps and components.

Question 662

In the fictional Pine-9 east pod, a replacement leaf with configuration review requirements, the team reports that a large route display contains noise and a specific match must be isolated. An unrelated configuration change is being considered. Which focused remediation best addresses the described problem first?

  1. Edit a syslog file and assume the route table is filtered.
  2. Apply supported CLI filtering to narrow the displayed results.
  3. Block the route through an ACL to make it disappear.
  4. Remove the routing protocol configuration to reduce output.

Explanation

Correct Answer

B:

Output filtering changes the view without changing routing behavior. For Pine-9, confirm the actual outcome: the filtered display includes the target entries while forwarding stays unchanged.

Incorrect Answers

A:

“Edit a syslog file and assume the route table is filtered” targets a different operation from the reported requirement: “a large route display contains noise and a specific match must be isolated”. Output filtering changes the view without changing routing behavior. Use the appropriate method: Apply supported CLI filtering to narrow the displayed results. Confirm that the replacement leaf reaches the expected operational state.

C:

“Block the route through an ACL to make it disappear” targets a different operation from the reported requirement: “a large route display contains noise and a specific match must be isolated”. Output filtering changes the view without changing routing behavior. Use the appropriate method: Apply supported CLI filtering to narrow the displayed results. Confirm that the replacement leaf reaches the expected operational state.

D:

“Remove the routing protocol configuration to reduce output” targets a different operation from the reported requirement: “a large route display contains noise and a specific match must be isolated”. Output filtering changes the view without changing routing behavior. Use the appropriate method: Apply supported CLI filtering to narrow the displayed results. Confirm that the replacement leaf reaches the expected operational state.

Question 663

In the fictional Delta-6 west pod, a controller-managed extension requiring reproducible evidence, the team reports that two access ports must share tenant Layer 2 reachability without becoming a global bridge. Which engineering action best satisfies this request?

  1. Use an IP-VRF alone as the Ethernet switching table.
  2. Use a CPM policer as the VLAN-to-bridge mapping.
  3. Attach the ports to the intended MAC-VRF bridge domain.
  4. Leak all tenant routes into the default network instance.

Explanation

Correct Answer

C:

A MAC-VRF supplies tenant Layer 2 MAC-learning and bridging scope. For Delta-6, confirm the actual outcome: the local tenant MACs learn within only the chosen MAC-VRF.

Incorrect Answers

A:

“Use an IP-VRF alone as the Ethernet switching table” targets a different operation from the reported requirement: “two access ports must share tenant Layer 2 reachability without becoming a global bridge”. A MAC-VRF supplies tenant Layer 2 MAC-learning and bridging scope. Use the appropriate method: Attach the ports to the intended MAC-VRF bridge domain.

B:

“Use a CPM policer as the VLAN-to-bridge mapping” targets a different operation from the reported requirement: “two access ports must share tenant Layer 2 reachability without becoming a global bridge”. A MAC-VRF supplies tenant Layer 2 MAC-learning and bridging scope. Use the appropriate method: Attach the ports to the intended MAC-VRF bridge domain.

D:

“Leak all tenant routes into the default network instance” targets a different operation from the reported requirement: “two access ports must share tenant Layer 2 reachability without becoming a global bridge”. A MAC-VRF supplies tenant Layer 2 MAC-learning and bridging scope. Use the appropriate method: Attach the ports to the intended MAC-VRF bridge domain.

Question 664

In the fictional Atlas-7 east pod, a service recovery task following a partial path outage, the team reports that a controller needs to advertise remote tenant MAC and IP reachability. The shift handoff must specify a defensible solution and the observable service outcome. Which recommendation is technically justified?

  1. Use interface CRC counters to distribute remote MAC locations.
  2. Treat VLAN tags as a global routing protocol.
  3. Use syslog messages to update remote forwarding entries.
  4. Use the BGP EVPN control plane for endpoint reachability advertisements.

Explanation

Correct Answer

D:

EVPN distributes overlay reachability information separately from VXLAN data-plane transport. For Atlas-7, confirm the actual outcome: the expected remote endpoint route appears in EVPN control-plane state.

Incorrect Answers

A:

“Use interface CRC counters to distribute remote MAC locations” targets a different operation from the reported requirement: “a controller needs to advertise remote tenant MAC and IP reachability”. EVPN distributes overlay reachability information separately from VXLAN data-plane transport. Use the appropriate method: Use the BGP EVPN control plane for endpoint reachability advertisements. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

B:

“Treat VLAN tags as a global routing protocol” targets a different operation from the reported requirement: “a controller needs to advertise remote tenant MAC and IP reachability”. EVPN distributes overlay reachability information separately from VXLAN data-plane transport. Use the appropriate method: Use the BGP EVPN control plane for endpoint reachability advertisements. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

C:

“Use syslog messages to update remote forwarding entries” targets a different operation from the reported requirement: “a controller needs to advertise remote tenant MAC and IP reachability”. EVPN distributes overlay reachability information separately from VXLAN data-plane transport. Use the appropriate method: Use the BGP EVPN control plane for endpoint reachability advertisements. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

Question 665

In the fictional North-10 west pod, a commissioning exercise under the on-call team, the team reports that equal-cost uplinks should carry traffic while preserving resilient paths. The shift handoff must specify a defensible solution and the observable service outcome. Which recommendation is technically justified?

  1. Use ECMP across eligible equal-cost routed next hops.
  2. Turn off redundant links to avoid routed multipath.
  3. Replace equal-cost routing with indiscriminate MAC flooding.
  4. Statically pin every flow to one uplink despite available equal-cost paths.

Explanation

Correct Answer

A:

ECMP lets the forwarding plane choose among eligible next hops without a spanning Layer 2 tree. For North-10, confirm the actual outcome: multiple eligible next hops appear in the relevant routing and forwarding state.

Incorrect Answers

B:

“Turn off redundant links to avoid routed multipath” targets a different operation from the reported requirement: “equal-cost uplinks should carry traffic while preserving resilient paths”. ECMP lets the forwarding plane choose among eligible next hops without a spanning Layer 2 tree. Use the appropriate method: Use ECMP across eligible equal-cost routed next hops. Before onboarding, test that the intended fabric state exists.

C:

“Replace equal-cost routing with indiscriminate MAC flooding” targets a different operation from the reported requirement: “equal-cost uplinks should carry traffic while preserving resilient paths”. ECMP lets the forwarding plane choose among eligible next hops without a spanning Layer 2 tree. Use the appropriate method: Use ECMP across eligible equal-cost routed next hops. Before onboarding, test that the intended fabric state exists.

D:

“Statically pin every flow to one uplink despite available equal-cost paths” targets a different operation from the reported requirement: “equal-cost uplinks should carry traffic while preserving resilient paths”. ECMP lets the forwarding plane choose among eligible next hops without a spanning Layer 2 tree. Use the appropriate method: Use ECMP across eligible equal-cost routed next hops. Before onboarding, test that the intended fabric state exists.

Question 666

In the fictional Metro-8 west pod, a multi-tenant fabric undergoing documented validation, the team reports that a tenant overlay is down but all local access links remain up. Which engineering action best satisfies this request?

  1. Delete all tenant VRFs immediately without inspecting transport.
  2. Validate underlay VTEP reachability before altering EVPN tenant service settings.
  3. Modify an interface ACL before isolating whether the tunnel exists.
  4. Treat a physical link LED as proof that remote VTEP routes work.

Explanation

Correct Answer

B:

Underlay IP reachability is a prerequisite for VXLAN overlay traffic. For Metro-8, confirm the actual outcome: underlay routes to relevant endpoints are viable before overlay control-plane checks.

Incorrect Answers

A:

“Delete all tenant VRFs immediately without inspecting transport” targets a different operation from the reported requirement: “a tenant overlay is down but all local access links remain up”. Underlay IP reachability is a prerequisite for VXLAN overlay traffic. Use the appropriate method: Validate underlay VTEP reachability before altering EVPN tenant service settings. Observe the relevant forwarding/control-plane behavior under the approved test.

C:

“Modify an interface ACL before isolating whether the tunnel exists” targets a different operation from the reported requirement: “a tenant overlay is down but all local access links remain up”. Underlay IP reachability is a prerequisite for VXLAN overlay traffic. Use the appropriate method: Validate underlay VTEP reachability before altering EVPN tenant service settings. Observe the relevant forwarding/control-plane behavior under the approved test.

D:

“Treat a physical link LED as proof that remote VTEP routes work” targets a different operation from the reported requirement: “a tenant overlay is down but all local access links remain up”. Underlay IP reachability is a prerequisite for VXLAN overlay traffic. Use the appropriate method: Validate underlay VTEP reachability before altering EVPN tenant service settings. Observe the relevant forwarding/control-plane behavior under the approved test.

Question 667

In the fictional North-10 east pod, a commissioning exercise under the on-call team, the team reports that a control protocol is intermittently dropped after aggressive protection settings. A peer suggested: "Increase interface CRC counters manually to hide packet drops" That did not solve the constraint. What should be chosen instead?

  1. Disable every routing policy to bypass CPU filtering.
  2. Change the system time zone to eliminate policing.
  3. Review CPM classification and policer rates against required control traffic.
  4. Increase interface CRC counters manually to hide packet drops.

Explanation

Correct Answer

C:

Correctly scoped policing balances CPU protection with valid protocol liveliness. For North-10, confirm the actual outcome: policer statistics and protocol session health match expected traffic rates.

Incorrect Answers

A:

“Disable every routing policy to bypass CPU filtering” targets a different operation from the reported requirement: “a control protocol is intermittently dropped after aggressive protection settings”. Correctly scoped policing balances CPU protection with valid protocol liveliness. Use the appropriate method: Review CPM classification and policer rates against required control traffic. Before onboarding, test that the intended fabric state exists.

B:

“Change the system time zone to eliminate policing” targets a different operation from the reported requirement: “a control protocol is intermittently dropped after aggressive protection settings”. Correctly scoped policing balances CPU protection with valid protocol liveliness. Use the appropriate method: Review CPM classification and policer rates against required control traffic. Before onboarding, test that the intended fabric state exists.

D:

“Increase interface CRC counters manually to hide packet drops” targets a different operation from the reported requirement: “a control protocol is intermittently dropped after aggressive protection settings”. Correctly scoped policing balances CPU protection with valid protocol liveliness. Use the appropriate method: Review CPM classification and policer rates against required control traffic. Before onboarding, test that the intended fabric state exists.

Question 668

In the fictional Ridge-2 east pod, a secondary data hall with tenant isolation requirements, the team reports that operators need consistent multi-node fabric changes and state reconciliation. An unrelated configuration change is being considered. Which focused remediation best addresses the described problem first?

  1. Treat routing table snapshots as a complete orchestration system.
  2. Make arbitrary manual changes at each switch with no desired-state record.
  3. Use only a local ping to guarantee all service intent is deployed.
  4. Use a supported fabric automation platform for coordinated configuration and visibility.

Explanation

Correct Answer

D:

Coordinated tooling can compare desired fabric intent with deployed network state. For Ridge-2, confirm the actual outcome: intended configurations and actual fabric inventory can be reconciled.

Incorrect Answers

A:

“Treat routing table snapshots as a complete orchestration system” targets a different operation from the reported requirement: “operators need consistent multi-node fabric changes and state reconciliation”. Coordinated tooling can compare desired fabric intent with deployed network state. Use the appropriate method: Use a supported fabric automation platform for coordinated configuration and visibility.

B:

“Make arbitrary manual changes at each switch with no desired-state record” targets a different operation from the reported requirement: “operators need consistent multi-node fabric changes and state reconciliation”. Coordinated tooling can compare desired fabric intent with deployed network state. Use the appropriate method: Use a supported fabric automation platform for coordinated configuration and visibility.

C:

“Use only a local ping to guarantee all service intent is deployed” targets a different operation from the reported requirement: “operators need consistent multi-node fabric changes and state reconciliation”. Coordinated tooling can compare desired fabric intent with deployed network state. Use the appropriate method: Use a supported fabric automation platform for coordinated configuration and visibility.

Question 669

In the fictional Canyon-5 east pod, a fabric operations audit prior to tenant onboarding, the team reports that two engineers are comparing configured state with a pending change. A peer suggested: "Discard the running view and trust only an offline screenshot" That did not solve the constraint. What should be chosen instead?

  1. Compare the running and candidate views rather than treating them as identical.
  2. Discard the running view and trust only an offline screenshot.
  3. Assume any staged edit is automatically committed.
  4. Use an ACL counter as a substitute for configuration comparison.

Explanation

Correct Answer

A:

Running and candidate configurations represent different phases of an edit transaction. For Canyon-5, confirm the actual outcome: the candidate diff identifies intended changes not yet reflected in running.

Incorrect Answers

B:

“Discard the running view and trust only an offline screenshot” targets a different operation from the reported requirement: “two engineers are comparing configured state with a pending change”. Running and candidate configurations represent different phases of an edit transaction. Use the appropriate method: Compare the running and candidate views rather than treating them as identical. Before onboarding, test that the intended fabric state exists.

C:

“Assume any staged edit is automatically committed” targets a different operation from the reported requirement: “two engineers are comparing configured state with a pending change”. Running and candidate configurations represent different phases of an edit transaction. Use the appropriate method: Compare the running and candidate views rather than treating them as identical. Before onboarding, test that the intended fabric state exists.

D:

“Use an ACL counter as a substitute for configuration comparison” targets a different operation from the reported requirement: “two engineers are comparing configured state with a pending change”. Running and candidate configurations represent different phases of an edit transaction. Use the appropriate method: Compare the running and candidate views rather than treating them as identical. Before onboarding, test that the intended fabric state exists.

Question 670

In the fictional Delta-6 west pod, a controller-managed extension requiring reproducible evidence, the team reports that a fresh switch boots normally but fails to retrieve its startup configuration. The shift handoff must specify a defensible solution and the observable service outcome. Which recommendation is technically justified?

  1. Disable every management interface to force ZTP to work.
  2. Check bootstrap networking, DHCP-provided information and referenced server availability.
  3. Inspect only production tenant MAC-VRF routes.
  4. Change live EVPN Type 2 entries before validating bootstrap transport.

Explanation

Correct Answer

B:

Bootstrap failure often comes from missing or unreachable provisioning prerequisites. For Delta-6, confirm the actual outcome: the discovered bootstrap destination is reachable and the retrieval completes.

Incorrect Answers

A:

“Disable every management interface to force ZTP to work” targets a different operation from the reported requirement: “a fresh switch boots normally but fails to retrieve its startup configuration”. Bootstrap failure often comes from missing or unreachable provisioning prerequisites. Use the appropriate method: Check bootstrap networking, DHCP-provided information and referenced server availability.

C:

“Inspect only production tenant MAC-VRF routes” targets a different operation from the reported requirement: “a fresh switch boots normally but fails to retrieve its startup configuration”. Bootstrap failure often comes from missing or unreachable provisioning prerequisites. Use the appropriate method: Check bootstrap networking, DHCP-provided information and referenced server availability.

D:

“Change live EVPN Type 2 entries before validating bootstrap transport” targets a different operation from the reported requirement: “a fresh switch boots normally but fails to retrieve its startup configuration”. Bootstrap failure often comes from missing or unreachable provisioning prerequisites. Use the appropriate method: Check bootstrap networking, DHCP-provided information and referenced server availability.

Nokia Data Center Fabric Fundamentals (4A0-D01) Practice Tests