mcAfee Secure Website
exam =5
exam =6

Exam Code: 4A0-D01

Exam Name: Nokia Data Center Fabric Fundamentals

Certification Provider: Nokia

Nokia 4A0-D01 Questions & Answers

Reliable & Actual Study Materials for 4A0-D01 Exam Success

61 Questions & Answers with Testing Engine

"4A0-D01: Nokia Data Center Fabric Fundamentals" Testing Engine covers all the knowledge points of the real Nokia 4A0-D01 exam.

The latest actual 4A0-D01 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at 4A0-D01 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Nokia Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Nokia 4A0-D01 Practice Test 66

Question 650

In the fictional Harbor-1 west pod, a staged top-of-rack rollout with a bounded maintenance window, the team reports that a newly installed switchport is administratively disabled. The shift handoff must specify a defensible solution and the observable service outcome. Which recommendation is technically justified?

  1. Create a BGP route target to power the transceiver.
  2. Enable the appropriate interface in configuration and check its operational status.
  3. Advertise an EVPN route before enabling the physical port.
  4. Change the tenant MAC-VRF without touching the down port.

Explanation

Correct Answer

B:

Administrative configuration and physical state must both be correct for the port to work. For Harbor-1, confirm the actual outcome: administrative enablement is applied and operational state becomes consistent with cabling.

Incorrect Answers

A:

“Create a BGP route target to power the transceiver” targets a different operation from the reported requirement: “a newly installed switchport is administratively disabled”. Administrative configuration and physical state must both be correct for the port to work. Use the appropriate method: Enable the appropriate interface in configuration and check its operational status.

C:

“Advertise an EVPN route before enabling the physical port” targets a different operation from the reported requirement: “a newly installed switchport is administratively disabled”. Administrative configuration and physical state must both be correct for the port to work. Use the appropriate method: Enable the appropriate interface in configuration and check its operational status.

D:

“Change the tenant MAC-VRF without touching the down port” targets a different operation from the reported requirement: “a newly installed switchport is administratively disabled”. Administrative configuration and physical state must both be correct for the port to work. Use the appropriate method: Enable the appropriate interface in configuration and check its operational status.

Question 651

In the fictional Summit-4 west pod, a change-freeze exception for a narrow operational fault, the team reports that a script parses configuration output into machine-readable fields. The shift handoff must specify a defensible solution and the observable service outcome. Which recommendation is technically justified?

  1. Convert interface IP addresses into spreadsheet row labels.
  2. Treat a tabular summary as a stable cross-version JSON schema.
  3. Request JSON-formatted CLI or API output rather than scrape decorated terminal text.
  4. Read the command history as though it were live device state.

Explanation

Correct Answer

C:

Structured output avoids brittle assumptions about human-oriented CLI presentation. For Summit-4, confirm the actual outcome: the output parses as JSON with expected keys and values.

Incorrect Answers

A:

“Convert interface IP addresses into spreadsheet row labels” targets a different operation from the reported requirement: “a script parses configuration output into machine-readable fields”. Structured output avoids brittle assumptions about human-oriented CLI presentation. Use the appropriate method: Request JSON-formatted CLI or API output rather than scrape decorated terminal text.

B:

“Treat a tabular summary as a stable cross-version JSON schema” targets a different operation from the reported requirement: “a script parses configuration output into machine-readable fields”. Structured output avoids brittle assumptions about human-oriented CLI presentation. Use the appropriate method: Request JSON-formatted CLI or API output rather than scrape decorated terminal text.

D:

“Read the command history as though it were live device state” targets a different operation from the reported requirement: “a script parses configuration output into machine-readable fields”. Structured output avoids brittle assumptions about human-oriented CLI presentation. Use the appropriate method: Request JSON-formatted CLI or API output rather than scrape decorated terminal text.

Question 652

In the fictional Orchard-3 east pod, a lab-to-production migration after a successful canary, the team reports that operators need to compare desired fabric behavior with measured network state. The shift handoff must specify a defensible solution and the observable service outcome. Which recommendation is technically justified?

  1. Use one manually updated spreadsheet as a live telemetry stream.
  2. Assume a configuration file alone proves live traffic health.
  3. Ignore all network events once the initial intent is accepted.
  4. Use EDA observability with state-driven monitoring and event correlation.

Explanation

Correct Answer

D:

Observability connects operational measurements and events to intended network operation. Check: telemetry and events show whether deployed behavior matches intended service state.

Incorrect Answers

A:

“Use one manually updated spreadsheet as a live telemetry stream” targets a different operation from the reported requirement: “operators need to compare desired fabric behavior with measured network state”. Observability connects operational measurements and events to intended network operation. The confirming result is: telemetry and events show whether deployed behavior matches intended service state. For the staged migration, validate the affected path before expansion.

B:

“Assume a configuration file alone proves live traffic health” targets a different operation from the reported requirement: “operators need to compare desired fabric behavior with measured network state”. Observability connects operational measurements and events to intended network operation. The confirming result is: telemetry and events show whether deployed behavior matches intended service state. For the staged migration, validate the affected path before expansion.

C:

“Ignore all network events once the initial intent is accepted” targets a different operation from the reported requirement: “operators need to compare desired fabric behavior with measured network state”. Observability connects operational measurements and events to intended network operation. The confirming result is: telemetry and events show whether deployed behavior matches intended service state. For the staged migration, validate the affected path before expansion.

Question 653

In the fictional Pine-9 west pod, a replacement leaf with configuration review requirements, the team reports that several static routes must share a maintained forwarding next-hop selection. The shift handoff must specify a defensible solution and the observable service outcome. Which recommendation is technically justified?

  1. Define and reference an appropriate next-hop group.
  2. Repeat arbitrary interface aliases as route next hops.
  3. Use the EDA service intent name as an IP gateway.
  4. Put all static routes into the MAC address learning table.

Explanation

Correct Answer

A:

A next-hop group separates forwarding next-hop membership from destination-prefix entries. For Pine-9, confirm the actual outcome: the intended static routes resolve through the maintained next-hop group.

Incorrect Answers

B:

“Repeat arbitrary interface aliases as route next hops” targets a different operation from the reported requirement: “several static routes must share a maintained forwarding next-hop selection”. A next-hop group separates forwarding next-hop membership from destination-prefix entries. Use the appropriate method: Define and reference an appropriate next-hop group. Confirm that the replacement leaf reaches the expected operational state.

C:

“Use the EDA service intent name as an IP gateway” targets a different operation from the reported requirement: “several static routes must share a maintained forwarding next-hop selection”. A next-hop group separates forwarding next-hop membership from destination-prefix entries. Use the appropriate method: Define and reference an appropriate next-hop group. Confirm that the replacement leaf reaches the expected operational state.

D:

“Put all static routes into the MAC address learning table” targets a different operation from the reported requirement: “several static routes must share a maintained forwarding next-hop selection”. A next-hop group separates forwarding next-hop membership from destination-prefix entries. Use the appropriate method: Define and reference an appropriate next-hop group. Confirm that the replacement leaf reaches the expected operational state.

Question 654

In the fictional Ridge-2 east pod, a secondary data hall with tenant isolation requirements, the team reports that multiple tenant subnets must communicate but unrelated tenants must remain isolated. A peer suggested: "Share a single unrestricted default route table among customers" That did not solve the constraint. What should be chosen instead?

  1. Share a single unrestricted default route table among customers.
  2. Use tenant-specific IP-VRF routing with the intended L3 EVPN overlay service.
  3. Bridge all tenants into the same MAC-VRF to make routes unnecessary.
  4. Replace EVPN routing with logging-only policies.

Explanation

Correct Answer

B:

Tenant-specific L3 EVPN separates inter-subnet routing from cross-customer leakage. For Ridge-2, confirm the actual outcome: routing works between authorized tenant subnets without unauthorized VRF crossing.

Incorrect Answers

A:

“Share a single unrestricted default route table among customers” targets a different operation from the reported requirement: “multiple tenant subnets must communicate but unrelated tenants must remain isolated”. Tenant-specific L3 EVPN separates inter-subnet routing from cross-customer leakage. Use the appropriate method: Use tenant-specific IP-VRF routing with the intended L3 EVPN overlay service.

C:

“Bridge all tenants into the same MAC-VRF to make routes unnecessary” targets a different operation from the reported requirement: “multiple tenant subnets must communicate but unrelated tenants must remain isolated”. Tenant-specific L3 EVPN separates inter-subnet routing from cross-customer leakage. Use the appropriate method: Use tenant-specific IP-VRF routing with the intended L3 EVPN overlay service.

D:

“Replace EVPN routing with logging-only policies” targets a different operation from the reported requirement: “multiple tenant subnets must communicate but unrelated tenants must remain isolated”. Tenant-specific L3 EVPN separates inter-subnet routing from cross-customer leakage. Use the appropriate method: Use tenant-specific IP-VRF routing with the intended L3 EVPN overlay service.

Question 655

In the fictional Canyon-5 west pod, a fabric operations audit prior to tenant onboarding, the team reports that an on-call engineer needs a compact human-readable comparison of many interfaces. An unrelated configuration change is being considered. Which focused remediation best addresses the described problem first?

  1. Export full model trees when a focused overview is needed.
  2. Disable interface statistics to shorten every command.
  3. Use the CLI table presentation where supported.
  4. Force binary packet capture as the only display format.

Explanation

Correct Answer

C:

Table presentation makes repeated fields easier to compare interactively. The option uses “Use the CLI table presentation where supported” to address “an on-call engineer needs a compact human-readable comparison of many interfaces”. The result must be observed on the affected component. Before onboarding, test that the intended fabric state exists.

Incorrect Answers

A:

“Export full model trees when a focused overview is needed” targets a different operation from the reported requirement: “an on-call engineer needs a compact human-readable comparison of many interfaces”. Table presentation makes repeated fields easier to compare interactively. Use the appropriate method: Use the CLI table presentation where supported. Before onboarding, test that the intended fabric state exists.

B:

“Disable interface statistics to shorten every command” targets a different operation from the reported requirement: “an on-call engineer needs a compact human-readable comparison of many interfaces”. Table presentation makes repeated fields easier to compare interactively. Use the appropriate method: Use the CLI table presentation where supported. Before onboarding, test that the intended fabric state exists.

D:

“Force binary packet capture as the only display format” targets a different operation from the reported requirement: “an on-call engineer needs a compact human-readable comparison of many interfaces”. Table presentation makes repeated fields easier to compare interactively. Use the appropriate method: Use the CLI table presentation where supported. Before onboarding, test that the intended fabric state exists.

Question 656

In the fictional Delta-6 east pod, a controller-managed extension requiring reproducible evidence, the team reports that a risky change requires a reliable return point. Which engineering action best satisfies this request?

  1. Change random route preferences to force recovery.
  2. Delete all prior configuration history before testing.
  3. Rely on a single CLI screenshot as an automatic rollback.
  4. Take and retain a configuration checkpoint before applying the change.

Explanation

Correct Answer

D:

A checkpoint provides an explicit configuration reference for controlled rollback. For Delta-6, confirm the actual outcome: the recorded checkpoint is available and maps to the intended prechange state.

Incorrect Answers

A:

“Change random route preferences to force recovery” targets a different operation from the reported requirement: “a risky change requires a reliable return point”. A checkpoint provides an explicit configuration reference for controlled rollback. Use the appropriate method: Take and retain a configuration checkpoint before applying the change.

B:

“Delete all prior configuration history before testing” targets a different operation from the reported requirement: “a risky change requires a reliable return point”. A checkpoint provides an explicit configuration reference for controlled rollback. Use the appropriate method: Take and retain a configuration checkpoint before applying the change.

C:

“Rely on a single CLI screenshot as an automatic rollback” targets a different operation from the reported requirement: “a risky change requires a reliable return point”. A checkpoint provides an explicit configuration reference for controlled rollback. Use the appropriate method: Take and retain a configuration checkpoint before applying the change.

Question 657

In the fictional Harbor-1 east pod, a staged top-of-rack rollout with a bounded maintenance window, the team reports that a short incident window requires evidence of selected packets without broad logging. Which engineering action best satisfies this request?

  1. Use a scoped SR Linux capture filter and inspect the captured traffic.
  2. Change an interface alias to make missing packets visible.
  3. Export only configuration checkpoints and infer packet contents.
  4. Use a route target as a packet capture selector.

Explanation

Correct Answer

A:

Capture filters select packet observations for troubleshooting rather than changing policy by themselves. For Harbor-1, confirm the actual outcome: the capture contains relevant matching frames from the requested interface or path.

Incorrect Answers

B:

“Change an interface alias to make missing packets visible” targets a different operation from the reported requirement: “a short incident window requires evidence of selected packets without broad logging”. Capture filters select packet observations for troubleshooting rather than changing policy by themselves. Use the appropriate method: Use a scoped SR Linux capture filter and inspect the captured traffic.

C:

“Export only configuration checkpoints and infer packet contents” targets a different operation from the reported requirement: “a short incident window requires evidence of selected packets without broad logging”. Capture filters select packet observations for troubleshooting rather than changing policy by themselves. Use the appropriate method: Use a scoped SR Linux capture filter and inspect the captured traffic.

D:

“Use a route target as a packet capture selector” targets a different operation from the reported requirement: “a short incident window requires evidence of selected packets without broad logging”. Capture filters select packet observations for troubleshooting rather than changing policy by themselves. Use the appropriate method: Use a scoped SR Linux capture filter and inspect the captured traffic.

Question 658

In the fictional Harbor-1 east pod, a staged top-of-rack rollout with a bounded maintenance window, the team reports that an architecture review asks how EDA's controller platform is operated. An unrelated configuration change is being considered. Which focused remediation best addresses the described problem first?

  1. Configure BFD as a container orchestration API.
  2. Describe EDA's Kubernetes-oriented orchestration architecture.
  3. Treat Kubernetes as the data-plane encapsulation for every packet.
  4. Assume the EDA control plane is identical to an Ethernet switch ASIC.

Explanation

Correct Answer

B:

EDA's platform orchestration concerns managed applications and controller components, not packet tunneling. For Harbor-1, confirm the actual outcome: the documented controller workloads and intent resources are observable on the orchestration platform.

Incorrect Answers

A:

“Configure BFD as a container orchestration API” targets a different operation from the reported requirement: “an architecture review asks how EDA's controller platform is operated”. EDA's platform orchestration concerns managed applications and controller components, not packet tunneling. Use the appropriate method: Describe EDA's Kubernetes-oriented orchestration architecture.

C:

“Treat Kubernetes as the data-plane encapsulation for every packet” targets a different operation from the reported requirement: “an architecture review asks how EDA's controller platform is operated”. EDA's platform orchestration concerns managed applications and controller components, not packet tunneling. Use the appropriate method: Describe EDA's Kubernetes-oriented orchestration architecture.

D:

“Assume the EDA control plane is identical to an Ethernet switch ASIC” targets a different operation from the reported requirement: “an architecture review asks how EDA's controller platform is operated”. EDA's platform orchestration concerns managed applications and controller components, not packet tunneling. Use the appropriate method: Describe EDA's Kubernetes-oriented orchestration architecture.

Question 659

In the fictional Summit-4 west pod, a change-freeze exception for a narrow operational fault, the team reports that a controller needs to advertise remote tenant MAC and IP reachability. Which engineering action best satisfies this request?

  1. Treat VLAN tags as a global routing protocol.
  2. Use interface CRC counters to distribute remote MAC locations.
  3. Use the BGP EVPN control plane for endpoint reachability advertisements.
  4. Use syslog messages to update remote forwarding entries.

Explanation

Correct Answer

C:

EVPN distributes overlay reachability information separately from VXLAN data-plane transport. For Summit-4, confirm the actual outcome: the expected remote endpoint route appears in EVPN control-plane state.

Incorrect Answers

A:

“Treat VLAN tags as a global routing protocol” targets a different operation from the reported requirement: “a controller needs to advertise remote tenant MAC and IP reachability”. EVPN distributes overlay reachability information separately from VXLAN data-plane transport. Use the appropriate method: Use the BGP EVPN control plane for endpoint reachability advertisements.

B:

“Use interface CRC counters to distribute remote MAC locations” targets a different operation from the reported requirement: “a controller needs to advertise remote tenant MAC and IP reachability”. EVPN distributes overlay reachability information separately from VXLAN data-plane transport. Use the appropriate method: Use the BGP EVPN control plane for endpoint reachability advertisements.

D:

“Use syslog messages to update remote forwarding entries” targets a different operation from the reported requirement: “a controller needs to advertise remote tenant MAC and IP reachability”. EVPN distributes overlay reachability information separately from VXLAN data-plane transport. Use the appropriate method: Use the BGP EVPN control plane for endpoint reachability advertisements.

Question 660

In the fictional Ridge-2 west pod, a secondary data hall with tenant isolation requirements, the team reports that a leaf's routed BGP peering fails after peer-AS data was changed. A peer suggested: "Add a VXLAN VNI to establish the underlay BGP session" That did not solve the constraint. What should be chosen instead?

  1. Change the syslog severity to fix the session.
  2. Add a VXLAN VNI to establish the underlay BGP session.
  3. Create a MAC-VRF rather than verifying the neighbor.
  4. Correct the neighbor addressing and peer autonomous system configuration.

Explanation

Correct Answer

D:

BGP session establishment requires consistent neighbor transport and AS expectations. The option uses “Correct the neighbor addressing and peer autonomous system configuration” to address “a leaf's routed BGP peering fails after peer-AS data was changed”. The result must be observed on the affected component.

Incorrect Answers

A:

“Change the syslog severity to fix the session” targets a different operation from the reported requirement: “a leaf's routed BGP peering fails after peer-AS data was changed”. BGP session establishment requires consistent neighbor transport and AS expectations. Use the appropriate method: Correct the neighbor addressing and peer autonomous system configuration.

B:

“Add a VXLAN VNI to establish the underlay BGP session” targets a different operation from the reported requirement: “a leaf's routed BGP peering fails after peer-AS data was changed”. BGP session establishment requires consistent neighbor transport and AS expectations. Use the appropriate method: Correct the neighbor addressing and peer autonomous system configuration.

C:

“Create a MAC-VRF rather than verifying the neighbor” targets a different operation from the reported requirement: “a leaf's routed BGP peering fails after peer-AS data was changed”. BGP session establishment requires consistent neighbor transport and AS expectations. Use the appropriate method: Correct the neighbor addressing and peer autonomous system configuration.

Nokia Data Center Fabric Fundamentals (4A0-D01) Practice Tests