mcAfee Secure Website
exam =5
exam =6

Exam Code: 4A0-D01

Exam Name: Nokia Data Center Fabric Fundamentals

Certification Provider: Nokia

Nokia 4A0-D01 Questions & Answers

Reliable & Actual Study Materials for 4A0-D01 Exam Success

61 Questions & Answers with Testing Engine

"4A0-D01: Nokia Data Center Fabric Fundamentals" Testing Engine covers all the knowledge points of the real Nokia 4A0-D01 exam.

The latest actual 4A0-D01 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at 4A0-D01 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Nokia Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Nokia 4A0-D01 Practice Test 6

Question 50

In the fictional Harbor-1 east pod, a staged top-of-rack rollout with a bounded maintenance window, the team reports that an underlay path needs rapid failure signaling between configured peers. The planned change is "Configure and verify a supported BFD session for the relevant adjacency." Which post-change observation best validates the intended technical behavior?

  1. Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior.
  2. Verify that the BFD session is up and its failure state correlates with the intended adjacency.
  3. Check only that the device hostname is listed in the inventory, without examining bfd peer detection behavior.
  4. Use an unrelated tenant dashboard as proof, without verifying the required bfd peer detection condition.

Explanation

Correct Answer

B:

BFD supplies protocol-independent rapid path liveliness detection when correctly bound to peers. The option uses “Verify that the BFD session is up and its failure state correlates with the intended adjacency” to address “an underlay path needs rapid failure signaling between configured peers”. The acceptance test is: the BFD session is up and its failure state correlates with the intended adjacency.

Incorrect Answers

A:

“Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior” targets a different operation from the reported requirement: “an underlay path needs rapid failure signaling between configured peers”. BFD supplies protocol-independent rapid path liveliness detection when correctly bound to peers. The confirming result is: the BFD session is up and its failure state correlates with the intended adjacency.

C:

“Check only that the device hostname is listed in the inventory, without examining bfd peer detection behavior” targets a different operation from the reported requirement: “an underlay path needs rapid failure signaling between configured peers”. BFD supplies protocol-independent rapid path liveliness detection when correctly bound to peers. The confirming result is: the BFD session is up and its failure state correlates with the intended adjacency.

D:

“Use an unrelated tenant dashboard as proof, without verifying the required bfd peer detection condition” targets a different operation from the reported requirement: “an underlay path needs rapid failure signaling between configured peers”. BFD supplies protocol-independent rapid path liveliness detection when correctly bound to peers. The confirming result is: the BFD session is up and its failure state correlates with the intended adjacency.

Question 51

In the fictional Harbor-1 east pod, a staged top-of-rack rollout with a bounded maintenance window, the team reports that a script parses configuration output into machine-readable fields. Which engineering action best satisfies this request?

  1. Treat a tabular summary as a stable cross-version JSON schema.
  2. Read the command history as though it were live device state.
  3. Request JSON-formatted CLI or API output rather than scrape decorated terminal text.
  4. Convert interface IP addresses into spreadsheet row labels.

Explanation

Correct Answer

C:

Structured output avoids brittle assumptions about human-oriented CLI presentation. The option uses “Request JSON-formatted CLI or API output rather than scrape decorated terminal text” to address “a script parses configuration output into machine-readable fields”. The result must be observed on the affected component.

Incorrect Answers

A:

“Treat a tabular summary as a stable cross-version JSON schema” targets a different operation from the reported requirement: “a script parses configuration output into machine-readable fields”. Structured output avoids brittle assumptions about human-oriented CLI presentation. Use the appropriate method: Request JSON-formatted CLI or API output rather than scrape decorated terminal text.

B:

“Read the command history as though it were live device state” targets a different operation from the reported requirement: “a script parses configuration output into machine-readable fields”. Structured output avoids brittle assumptions about human-oriented CLI presentation. Use the appropriate method: Request JSON-formatted CLI or API output rather than scrape decorated terminal text.

D:

“Convert interface IP addresses into spreadsheet row labels” targets a different operation from the reported requirement: “a script parses configuration output into machine-readable fields”. Structured output avoids brittle assumptions about human-oriented CLI presentation. Use the appropriate method: Request JSON-formatted CLI or API output rather than scrape decorated terminal text.

Question 52

In the fictional Delta-6 west pod, a controller-managed extension requiring reproducible evidence, the team reports that two engineers are comparing configured state with a pending change. Which engineering action best satisfies this request?

  1. Assume any staged edit is automatically committed.
  2. Use an ACL counter as a substitute for configuration comparison.
  3. Discard the running view and trust only an offline screenshot.
  4. Compare the running and candidate views rather than treating them as identical.

Explanation

Correct Answer

D:

Running and candidate configurations represent different phases of an edit transaction. For Delta-6, confirm the actual outcome: the candidate diff identifies intended changes not yet reflected in running.

Incorrect Answers

A:

“Assume any staged edit is automatically committed” targets a different operation from the reported requirement: “two engineers are comparing configured state with a pending change”. Running and candidate configurations represent different phases of an edit transaction. Use the appropriate method: Compare the running and candidate views rather than treating them as identical.

B:

“Use an ACL counter as a substitute for configuration comparison” targets a different operation from the reported requirement: “two engineers are comparing configured state with a pending change”. Running and candidate configurations represent different phases of an edit transaction. Use the appropriate method: Compare the running and candidate views rather than treating them as identical.

C:

“Discard the running view and trust only an offline screenshot” targets a different operation from the reported requirement: “two engineers are comparing configured state with a pending change”. Running and candidate configurations represent different phases of an edit transaction. Use the appropriate method: Compare the running and candidate views rather than treating them as identical.

Question 53

In the fictional Pine-9 west pod, a replacement leaf with configuration review requirements, the team reports that separate customers must not share unintended bridge or routing tables. Which engineering action best satisfies this request?

  1. Associate tenant segments with appropriate MAC-VRFs and IP-VRFs.
  2. Disable all segmentation and rely on hostnames.
  3. Put every tenant into the default network instance without controls.
  4. Assign the same L2 broadcast domain to every customer.

Explanation

Correct Answer

A:

Distinct virtual routing and bridging instances provide explicit tenant forwarding boundaries. For Pine-9, confirm the actual outcome: tenant routes and MACs occur only in the intended network instances.

Incorrect Answers

B:

“Disable all segmentation and rely on hostnames” targets a different operation from the reported requirement: “separate customers must not share unintended bridge or routing tables”. Distinct virtual routing and bridging instances provide explicit tenant forwarding boundaries. Use the appropriate method: Associate tenant segments with appropriate MAC-VRFs and IP-VRFs. Confirm that the replacement leaf reaches the expected operational state.

C:

“Put every tenant into the default network instance without controls” targets a different operation from the reported requirement: “separate customers must not share unintended bridge or routing tables”. Distinct virtual routing and bridging instances provide explicit tenant forwarding boundaries. Use the appropriate method: Associate tenant segments with appropriate MAC-VRFs and IP-VRFs. Confirm that the replacement leaf reaches the expected operational state.

D:

“Assign the same L2 broadcast domain to every customer” targets a different operation from the reported requirement: “separate customers must not share unintended bridge or routing tables”. Distinct virtual routing and bridging instances provide explicit tenant forwarding boundaries. Use the appropriate method: Associate tenant segments with appropriate MAC-VRFs and IP-VRFs. Confirm that the replacement leaf reaches the expected operational state.

Question 54

In the fictional Metro-8 west pod, a multi-tenant fabric undergoing documented validation, the team reports that an underlay path needs rapid failure signaling between configured peers. Which engineering action best satisfies this request?

  1. Use EVPN route distinguishers as physical keepalive packets.
  2. Configure and verify a supported BFD session for the relevant adjacency.
  3. Rely only on slow daily interface inventory exports.
  4. Turn off BGP neighbor transport to improve liveliness.

Explanation

Correct Answer

B:

BFD supplies protocol-independent rapid path liveliness detection when correctly bound to peers. For Metro-8, confirm the actual outcome: the BFD session is up and its failure state correlates with the intended adjacency.

Incorrect Answers

A:

“Use EVPN route distinguishers as physical keepalive packets” targets a different operation from the reported requirement: “an underlay path needs rapid failure signaling between configured peers”. BFD supplies protocol-independent rapid path liveliness detection when correctly bound to peers. Use the appropriate method: Configure and verify a supported BFD session for the relevant adjacency. Observe the relevant forwarding/control-plane behavior under the approved test.

C:

“Rely only on slow daily interface inventory exports” targets a different operation from the reported requirement: “an underlay path needs rapid failure signaling between configured peers”. BFD supplies protocol-independent rapid path liveliness detection when correctly bound to peers. Use the appropriate method: Configure and verify a supported BFD session for the relevant adjacency. Observe the relevant forwarding/control-plane behavior under the approved test.

D:

“Turn off BGP neighbor transport to improve liveliness” targets a different operation from the reported requirement: “an underlay path needs rapid failure signaling between configured peers”. BFD supplies protocol-independent rapid path liveliness detection when correctly bound to peers. Use the appropriate method: Configure and verify a supported BFD session for the relevant adjacency. Observe the relevant forwarding/control-plane behavior under the approved test.

Question 55

In the fictional Delta-6 west pod, a controller-managed extension requiring reproducible evidence, the team reports that a leaf's routed BGP peering fails after peer-AS data was changed. The planned change is "Correct the neighbor addressing and peer autonomous system configuration." Which post-change observation best validates the intended technical behavior?

  1. Use an unrelated tenant dashboard as proof, without verifying the required bgp neighbor identity condition.
  2. Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior.
  3. Verify that the intended BGP neighbor is established with the correct peer identity.
  4. Check only that the device hostname is listed in the inventory, without examining bgp neighbor identity behavior.

Explanation

Correct Answer

C:

BGP session establishment requires consistent neighbor transport and AS expectations. The option uses “Verify that the intended BGP neighbor is established with the correct peer identity” to address “a leaf's routed BGP peering fails after peer-AS data was changed”. The acceptance test is: the intended BGP neighbor is established with the correct peer identity.

Incorrect Answers

A:

“Use an unrelated tenant dashboard as proof, without verifying the required bgp neighbor identity condition” targets a different operation from the reported requirement: “a leaf's routed BGP peering fails after peer-AS data was changed”. BGP session establishment requires consistent neighbor transport and AS expectations. The confirming result is: the intended BGP neighbor is established with the correct peer identity.

B:

“Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior” targets a different operation from the reported requirement: “a leaf's routed BGP peering fails after peer-AS data was changed”. BGP session establishment requires consistent neighbor transport and AS expectations. The confirming result is: the intended BGP neighbor is established with the correct peer identity.

D:

“Check only that the device hostname is listed in the inventory, without examining bgp neighbor identity behavior” targets a different operation from the reported requirement: “a leaf's routed BGP peering fails after peer-AS data was changed”. BGP session establishment requires consistent neighbor transport and AS expectations. The confirming result is: the intended BGP neighbor is established with the correct peer identity.

Question 56

In the fictional North-10 east pod, a commissioning exercise under the on-call team, the team reports that a risky change requires a reliable return point. A peer suggested: "Rely on a single CLI screenshot as an automatic rollback" That did not solve the constraint. What should be chosen instead?

  1. Delete all prior configuration history before testing.
  2. Change random route preferences to force recovery.
  3. Rely on a single CLI screenshot as an automatic rollback.
  4. Take and retain a configuration checkpoint before applying the change.

Explanation

Correct Answer

D:

A checkpoint provides an explicit configuration reference for controlled rollback. For North-10, confirm the actual outcome: the recorded checkpoint is available and maps to the intended prechange state.

Incorrect Answers

A:

“Delete all prior configuration history before testing” targets a different operation from the reported requirement: “a risky change requires a reliable return point”. A checkpoint provides an explicit configuration reference for controlled rollback. Use the appropriate method: Take and retain a configuration checkpoint before applying the change. Before onboarding, test that the intended fabric state exists.

B:

“Change random route preferences to force recovery” targets a different operation from the reported requirement: “a risky change requires a reliable return point”. A checkpoint provides an explicit configuration reference for controlled rollback. Use the appropriate method: Take and retain a configuration checkpoint before applying the change. Before onboarding, test that the intended fabric state exists.

C:

“Rely on a single CLI screenshot as an automatic rollback” targets a different operation from the reported requirement: “a risky change requires a reliable return point”. A checkpoint provides an explicit configuration reference for controlled rollback. Use the appropriate method: Take and retain a configuration checkpoint before applying the change. Before onboarding, test that the intended fabric state exists.

Question 57

In the fictional Metro-8 east pod, a multi-tenant fabric undergoing documented validation, the team reports that a newly installed switchport is administratively disabled. An unrelated configuration change is being considered. Which focused remediation best addresses the described problem first?

  1. Enable the appropriate interface in configuration and check its operational status.
  2. Advertise an EVPN route before enabling the physical port.
  3. Change the tenant MAC-VRF without touching the down port.
  4. Create a BGP route target to power the transceiver.

Explanation

Correct Answer

A:

Administrative configuration and physical state must both be correct for the port to work. The option uses “Enable the appropriate interface in configuration and check its operational status” to address “a newly installed switchport is administratively disabled”. The result must be observed on the affected component. Observe the relevant forwarding/control-plane behavior under the approved test.

Incorrect Answers

B:

“Advertise an EVPN route before enabling the physical port” targets a different operation from the reported requirement: “a newly installed switchport is administratively disabled”. Administrative configuration and physical state must both be correct for the port to work. Use the appropriate method: Enable the appropriate interface in configuration and check its operational status. Observe the relevant forwarding/control-plane behavior under the approved test.

C:

“Change the tenant MAC-VRF without touching the down port” targets a different operation from the reported requirement: “a newly installed switchport is administratively disabled”. Administrative configuration and physical state must both be correct for the port to work. Use the appropriate method: Enable the appropriate interface in configuration and check its operational status. Observe the relevant forwarding/control-plane behavior under the approved test.

D:

“Create a BGP route target to power the transceiver” targets a different operation from the reported requirement: “a newly installed switchport is administratively disabled”. Administrative configuration and physical state must both be correct for the port to work. Use the appropriate method: Enable the appropriate interface in configuration and check its operational status. Observe the relevant forwarding/control-plane behavior under the approved test.

Question 58

In the fictional Ridge-2 west pod, a secondary data hall with tenant isolation requirements, the team reports that two remote VTEPs must carry a tenant overlay across routed links. The shift handoff must specify a defensible solution and the observable service outcome. Which recommendation is technically justified?

  1. Treat the tenant service route target as an underlay IP gateway.
  2. Configure matching VTEP reachability and VXLAN overlay endpoint settings.
  3. Use BFD alone as a replacement for VXLAN packet encapsulation.
  4. Convert every spine interface to an untagged access port.

Explanation

Correct Answer

B:

VTEPs encapsulate and decapsulate VXLAN traffic using reachable outer IP endpoints. For Ridge-2, confirm the actual outcome: the configured endpoints exchange tenant traffic over reachable underlay paths.

Incorrect Answers

A:

“Treat the tenant service route target as an underlay IP gateway” targets a different operation from the reported requirement: “two remote VTEPs must carry a tenant overlay across routed links”. VTEPs encapsulate and decapsulate VXLAN traffic using reachable outer IP endpoints. Use the appropriate method: Configure matching VTEP reachability and VXLAN overlay endpoint settings.

C:

“Use BFD alone as a replacement for VXLAN packet encapsulation” targets a different operation from the reported requirement: “two remote VTEPs must carry a tenant overlay across routed links”. VTEPs encapsulate and decapsulate VXLAN traffic using reachable outer IP endpoints. Use the appropriate method: Configure matching VTEP reachability and VXLAN overlay endpoint settings.

D:

“Convert every spine interface to an untagged access port” targets a different operation from the reported requirement: “two remote VTEPs must carry a tenant overlay across routed links”. VTEPs encapsulate and decapsulate VXLAN traffic using reachable outer IP endpoints. Use the appropriate method: Configure matching VTEP reachability and VXLAN overlay endpoint settings.

Question 59

In the fictional Canyon-5 west pod, a fabric operations audit prior to tenant onboarding, the team reports that an EVPN segment needs remote membership discovery for broadcast and unknown traffic. A peer suggested: "Use Type 5 prefixes alone as broadcast membership advertisement" That did not solve the constraint. What should be chosen instead?

  1. Disable VXLAN on the remote nodes to discover flood members.
  2. Use Type 5 prefixes alone as broadcast membership advertisement.
  3. Check the EVPN Type 3 inclusive multicast Ethernet tag signaling.
  4. Use a JSON-RPC TLS profile as the overlay membership signal.

Explanation

Correct Answer

C:

Inclusive multicast routes help identify remote members for segment-wide traffic handling. For Canyon-5, confirm the actual outcome: the tenant EVPN instance shows expected participating remote VTEPs.

Incorrect Answers

A:

“Disable VXLAN on the remote nodes to discover flood members” targets a different operation from the reported requirement: “an EVPN segment needs remote membership discovery for broadcast and unknown traffic”. Inclusive multicast routes help identify remote members for segment-wide traffic handling. Use the appropriate method: Check the EVPN Type 3 inclusive multicast Ethernet tag signaling. Before onboarding, test that the intended fabric state exists.

B:

“Use Type 5 prefixes alone as broadcast membership advertisement” targets a different operation from the reported requirement: “an EVPN segment needs remote membership discovery for broadcast and unknown traffic”. Inclusive multicast routes help identify remote members for segment-wide traffic handling. Use the appropriate method: Check the EVPN Type 3 inclusive multicast Ethernet tag signaling. Before onboarding, test that the intended fabric state exists.

D:

“Use a JSON-RPC TLS profile as the overlay membership signal” targets a different operation from the reported requirement: “an EVPN segment needs remote membership discovery for broadcast and unknown traffic”. Inclusive multicast routes help identify remote members for segment-wide traffic handling. Use the appropriate method: Check the EVPN Type 3 inclusive multicast Ethernet tag signaling. Before onboarding, test that the intended fabric state exists.

Question 60

In the fictional Orchard-3 east pod, a lab-to-production migration after a successful canary, the team reports that a VXLAN endpoint sourced from a loopback address is unreachable. An unrelated configuration change is being considered. Which focused remediation best addresses the described problem first?

  1. Use a log severity filter as the reachability repair.
  2. Advertise only a tenant MAC and ignore underlay reachability.
  3. Rename the loopback without updating any IP routes.
  4. Ensure the loopback endpoint address is advertised and routed in the underlay.

Explanation

Correct Answer

D:

Loopback-based tunnel endpoints require routed transport reachability. The option uses “Ensure the loopback endpoint address is advertised and routed in the underlay” to address “a VXLAN endpoint sourced from a loopback address is unreachable”. The acceptance test is: the remote endpoint loopback resolves through valid underlay routes. For the staged migration, validate the affected path before expansion.

Incorrect Answers

A:

“Use a log severity filter as the reachability repair” targets a different operation from the reported requirement: “a VXLAN endpoint sourced from a loopback address is unreachable”. Loopback-based tunnel endpoints require routed transport reachability. The confirming result is: the remote endpoint loopback resolves through valid underlay routes. For the staged migration, validate the affected path before expansion.

B:

“Advertise only a tenant MAC and ignore underlay reachability” targets a different operation from the reported requirement: “a VXLAN endpoint sourced from a loopback address is unreachable”. Loopback-based tunnel endpoints require routed transport reachability. The confirming result is: the remote endpoint loopback resolves through valid underlay routes. For the staged migration, validate the affected path before expansion.

C:

“Rename the loopback without updating any IP routes” targets a different operation from the reported requirement: “a VXLAN endpoint sourced from a loopback address is unreachable”. Loopback-based tunnel endpoints require routed transport reachability. The confirming result is: the remote endpoint loopback resolves through valid underlay routes. For the staged migration, validate the affected path before expansion.

Nokia Data Center Fabric Fundamentals (4A0-D01) Practice Tests