mcAfee Secure Website
exam =5
exam =6

Exam Code: 4A0-D01

Exam Name: Nokia Data Center Fabric Fundamentals

Certification Provider: Nokia

Nokia 4A0-D01 Questions & Answers

Reliable & Actual Study Materials for 4A0-D01 Exam Success

61 Questions & Answers with Testing Engine

"4A0-D01: Nokia Data Center Fabric Fundamentals" Testing Engine covers all the knowledge points of the real Nokia 4A0-D01 exam.

The latest actual 4A0-D01 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at 4A0-D01 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Nokia Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Nokia 4A0-D01 Practice Test 5

Question 40

In the fictional Metro-8 east pod, a multi-tenant fabric undergoing documented validation, the team reports that a fabric alert could be caused by either a physical link failure or a BGP issue. The shift handoff must specify a defensible solution and the observable service outcome. Which recommendation is technically justified?

  1. Change all overlay VNIs before looking at the underlay.
  2. Use one unrelated tenant ping as the sole cause analysis.
  3. Conclude the cause from the alert title alone without checking state.
  4. Correlate interface state and counters with BGP/BFD events and logs.

Explanation

Correct Answer

D:

Cross-layer evidence helps distinguish correlated failures from downstream symptoms. For Metro-8, confirm the actual outcome: timestamped link and adjacency events explain the impacted routes and tenants.

Incorrect Answers

A:

“Change all overlay VNIs before looking at the underlay” targets a different operation from the reported requirement: “a fabric alert could be caused by either a physical link failure or a BGP issue”. Cross-layer evidence helps distinguish correlated failures from downstream symptoms. Use the appropriate method: Correlate interface state and counters with BGP/BFD events and logs. Observe the relevant forwarding/control-plane behavior under the approved test.

B:

“Use one unrelated tenant ping as the sole cause analysis” targets a different operation from the reported requirement: “a fabric alert could be caused by either a physical link failure or a BGP issue”. Cross-layer evidence helps distinguish correlated failures from downstream symptoms. Use the appropriate method: Correlate interface state and counters with BGP/BFD events and logs. Observe the relevant forwarding/control-plane behavior under the approved test.

C:

“Conclude the cause from the alert title alone without checking state” targets a different operation from the reported requirement: “a fabric alert could be caused by either a physical link failure or a BGP issue”. Cross-layer evidence helps distinguish correlated failures from downstream symptoms. Use the appropriate method: Correlate interface state and counters with BGP/BFD events and logs. Observe the relevant forwarding/control-plane behavior under the approved test.

Question 41

In the fictional Pine-9 east pod, a replacement leaf with configuration review requirements, the team reports that two engineers are comparing configured state with a pending change. The planned change is "Compare the running and candidate views rather than treating them as identical." Which post-change observation best validates the intended technical behavior?

  1. Verify that the candidate diff identifies intended changes not yet reflected in running.
  2. Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior.
  3. Use an unrelated tenant dashboard as proof, without verifying the required running versus candidate condition.
  4. Check only that the device hostname is listed in the inventory, without examining running versus candidate behavior.

Explanation

Correct Answer

A:

Running and candidate configurations represent different phases of an edit transaction. The option uses “Verify that the candidate diff identifies intended changes not yet reflected in running” to address “two engineers are comparing configured state with a pending change”. The acceptance test is: the candidate diff identifies intended changes not yet reflected in running. Confirm that the replacement leaf reaches the expected operational state.

Incorrect Answers

B:

“Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior” targets a different operation from the reported requirement: “two engineers are comparing configured state with a pending change”. Running and candidate configurations represent different phases of an edit transaction. The confirming result is: the candidate diff identifies intended changes not yet reflected in running. Confirm that the replacement leaf reaches the expected operational state.

C:

“Use an unrelated tenant dashboard as proof, without verifying the required running versus candidate condition” targets a different operation from the reported requirement: “two engineers are comparing configured state with a pending change”. Running and candidate configurations represent different phases of an edit transaction. The confirming result is: the candidate diff identifies intended changes not yet reflected in running. Confirm that the replacement leaf reaches the expected operational state.

D:

“Check only that the device hostname is listed in the inventory, without examining running versus candidate behavior” targets a different operation from the reported requirement: “two engineers are comparing configured state with a pending change”. Running and candidate configurations represent different phases of an edit transaction. The confirming result is: the candidate diff identifies intended changes not yet reflected in running. Confirm that the replacement leaf reaches the expected operational state.

Question 42

In the fictional Ridge-2 east pod, a secondary data hall with tenant isolation requirements, the team reports that newly powered switches should receive initial configuration with minimal manual access. A peer suggested: "Configure only a tenant MAC-VRF on a disconnected laptop" That did not solve the constraint. What should be chosen instead?

  1. Configure only a tenant MAC-VRF on a disconnected laptop.
  2. Provide the required ZTP discovery and bootstrap information through supported services.
  3. Expect a device to discover complete configuration from EVPN route targets alone.
  4. Assume DNS hostname changes automatically create the bootstrap configuration.

Explanation

Correct Answer

B:

ZTP depends on reachable bootstrap infrastructure and device discovery behavior. For Ridge-2, confirm the actual outcome: the device discovers its bootstrap source and applies the intended initial configuration.

Incorrect Answers

A:

“Configure only a tenant MAC-VRF on a disconnected laptop” targets a different operation from the reported requirement: “newly powered switches should receive initial configuration with minimal manual access”. ZTP depends on reachable bootstrap infrastructure and device discovery behavior. Use the appropriate method: Provide the required ZTP discovery and bootstrap information through supported services.

C:

“Expect a device to discover complete configuration from EVPN route targets alone” targets a different operation from the reported requirement: “newly powered switches should receive initial configuration with minimal manual access”. ZTP depends on reachable bootstrap infrastructure and device discovery behavior. Use the appropriate method: Provide the required ZTP discovery and bootstrap information through supported services.

D:

“Assume DNS hostname changes automatically create the bootstrap configuration” targets a different operation from the reported requirement: “newly powered switches should receive initial configuration with minimal manual access”. ZTP depends on reachable bootstrap infrastructure and device discovery behavior. Use the appropriate method: Provide the required ZTP discovery and bootstrap information through supported services.

Question 43

In the fictional Pine-9 east pod, a replacement leaf with configuration review requirements, the team reports that a remote overlay endpoint cannot be reached over the physical fabric. The shift handoff must specify a defensible solution and the observable service outcome. Which recommendation is technically justified?

  1. Recreate the tenant VLAN without checking IP reachability.
  2. Change the application hostname while leaving the network unchanged.
  3. Restore IP routing reachability to the remote VTEP address in the underlay.
  4. Disable BGP EVPN to hide underlay route loss.

Explanation

Correct Answer

C:

An overlay packet still needs an IP path to its outer tunnel destination. For Pine-9, confirm the actual outcome: the remote VTEP loopback is reachable through the intended underlay route.

Incorrect Answers

A:

“Recreate the tenant VLAN without checking IP reachability” targets a different operation from the reported requirement: “a remote overlay endpoint cannot be reached over the physical fabric”. An overlay packet still needs an IP path to its outer tunnel destination. Use the appropriate method: Restore IP routing reachability to the remote VTEP address in the underlay. Confirm that the replacement leaf reaches the expected operational state.

B:

“Change the application hostname while leaving the network unchanged” targets a different operation from the reported requirement: “a remote overlay endpoint cannot be reached over the physical fabric”. An overlay packet still needs an IP path to its outer tunnel destination. Use the appropriate method: Restore IP routing reachability to the remote VTEP address in the underlay. Confirm that the replacement leaf reaches the expected operational state.

D:

“Disable BGP EVPN to hide underlay route loss” targets a different operation from the reported requirement: “a remote overlay endpoint cannot be reached over the physical fabric”. An overlay packet still needs an IP path to its outer tunnel destination. Use the appropriate method: Restore IP routing reachability to the remote VTEP address in the underlay. Confirm that the replacement leaf reaches the expected operational state.

Question 44

In the fictional Summit-4 west pod, a change-freeze exception for a narrow operational fault, the team reports that a policy requires a destination prefix to be explicitly discarded. The shift handoff must specify a defensible solution and the observable service outcome. Which recommendation is technically justified?

  1. Create an EVPN Type 2 MAC advertisement for all discarded packets.
  2. Publish the prefix as a bridged access VLAN.
  3. Assign a CLI shortcut that echoes the prefix.
  4. Use a properly scoped static blackhole disposition for that prefix.

Explanation

Correct Answer

D:

A blackhole route deliberately discards matching traffic rather than forwarding it. For Summit-4, confirm the actual outcome: the targeted prefix resolves to discard while unrelated prefixes keep valid paths.

Incorrect Answers

A:

“Create an EVPN Type 2 MAC advertisement for all discarded packets” targets a different operation from the reported requirement: “a policy requires a destination prefix to be explicitly discarded”. A blackhole route deliberately discards matching traffic rather than forwarding it. Use the appropriate method: Use a properly scoped static blackhole disposition for that prefix.

B:

“Publish the prefix as a bridged access VLAN” targets a different operation from the reported requirement: “a policy requires a destination prefix to be explicitly discarded”. A blackhole route deliberately discards matching traffic rather than forwarding it. Use the appropriate method: Use a properly scoped static blackhole disposition for that prefix.

C:

“Assign a CLI shortcut that echoes the prefix” targets a different operation from the reported requirement: “a policy requires a destination prefix to be explicitly discarded”. A blackhole route deliberately discards matching traffic rather than forwarding it. Use the appropriate method: Use a properly scoped static blackhole disposition for that prefix.

Question 45

In the fictional Harbor-1 west pod, a staged top-of-rack rollout with a bounded maintenance window, the team reports that the intended fabric topology differs from deployed configuration on several nodes. The shift handoff must specify a defensible solution and the observable service outcome. Which recommendation is technically justified?

  1. Use EDA fabric-intent workflows to reconcile desired fabric configuration.
  2. Use log severity changes as the desired-state data model.
  3. Replace all route policies with packet captures.
  4. Manually change one switch and assume the whole fabric follows.

Explanation

Correct Answer

A:

Intent-based automation represents desired outcomes and coordinates enforcement. For Harbor-1, confirm the actual outcome: deployed fabric resources converge toward the declared and validated intent.

Incorrect Answers

B:

“Use log severity changes as the desired-state data model” targets a different operation from the reported requirement: “the intended fabric topology differs from deployed configuration on several nodes”. Intent-based automation represents desired outcomes and coordinates enforcement. Use the appropriate method: Use EDA fabric-intent workflows to reconcile desired fabric configuration.

C:

“Replace all route policies with packet captures” targets a different operation from the reported requirement: “the intended fabric topology differs from deployed configuration on several nodes”. Intent-based automation represents desired outcomes and coordinates enforcement. Use the appropriate method: Use EDA fabric-intent workflows to reconcile desired fabric configuration.

D:

“Manually change one switch and assume the whole fabric follows” targets a different operation from the reported requirement: “the intended fabric topology differs from deployed configuration on several nodes”. Intent-based automation represents desired outcomes and coordinates enforcement. Use the appropriate method: Use EDA fabric-intent workflows to reconcile desired fabric configuration.

Question 46

In the fictional Pine-9 east pod, a replacement leaf with configuration review requirements, the team reports that an intermittent EVPN event requires a chronological evidence trail. An unrelated configuration change is being considered. Which focused remediation best addresses the described problem first?

  1. Assume a single ping reproduces the entire event sequence.
  2. Inspect SR Linux operational logs with relevant timestamps and components.
  3. Use a hostname change as a timestamp correlation technique.
  4. Modify route-target values to create a log history.

Explanation

Correct Answer

B:

Logs provide timestamped operational context that can be correlated with state changes. The option uses “Inspect SR Linux operational logs with relevant timestamps and components” to address “an intermittent EVPN event requires a chronological evidence trail”. The result must be observed on the affected component. Confirm that the replacement leaf reaches the expected operational state.

Incorrect Answers

A:

“Assume a single ping reproduces the entire event sequence” targets a different operation from the reported requirement: “an intermittent EVPN event requires a chronological evidence trail”. Logs provide timestamped operational context that can be correlated with state changes. Use the appropriate method: Inspect SR Linux operational logs with relevant timestamps and components. Confirm that the replacement leaf reaches the expected operational state.

C:

“Use a hostname change as a timestamp correlation technique” targets a different operation from the reported requirement: “an intermittent EVPN event requires a chronological evidence trail”. Logs provide timestamped operational context that can be correlated with state changes. Use the appropriate method: Inspect SR Linux operational logs with relevant timestamps and components. Confirm that the replacement leaf reaches the expected operational state.

D:

“Modify route-target values to create a log history” targets a different operation from the reported requirement: “an intermittent EVPN event requires a chronological evidence trail”. Logs provide timestamped operational context that can be correlated with state changes. Use the appropriate method: Inspect SR Linux operational logs with relevant timestamps and components. Confirm that the replacement leaf reaches the expected operational state.

Question 47

In the fictional Harbor-1 west pod, a staged top-of-rack rollout with a bounded maintenance window, the team reports that the same tenant MAC oscillates between attachments and causes instability. The planned change is "Inspect and apply the MAC move controls and investigate the attachment loop." Which post-change observation best validates the intended technical behavior?

  1. Use an unrelated tenant dashboard as proof, without verifying the required mac movement protection condition.
  2. Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior.
  3. Verify that MAC learning stabilizes on the intended attachment without recurrent move alarms.
  4. Check only that the device hostname is listed in the inventory, without examining mac movement protection behavior.

Explanation

Correct Answer

C:

MAC move visibility and controls address repeated endpoint relocation or loops in a bridge instance. The option uses “Verify that MAC learning stabilizes on the intended attachment without recurrent move alarms” to address “the same tenant MAC oscillates between attachments and causes instability”. The acceptance test is: MAC learning stabilizes on the intended attachment without recurrent move alarms.

Incorrect Answers

A:

“Use an unrelated tenant dashboard as proof, without verifying the required mac movement protection condition” targets a different operation from the reported requirement: “the same tenant MAC oscillates between attachments and causes instability”. MAC move visibility and controls address repeated endpoint relocation or loops in a bridge instance. The confirming result is: MAC learning stabilizes on the intended attachment without recurrent move alarms.

B:

“Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior” targets a different operation from the reported requirement: “the same tenant MAC oscillates between attachments and causes instability”. MAC move visibility and controls address repeated endpoint relocation or loops in a bridge instance. The confirming result is: MAC learning stabilizes on the intended attachment without recurrent move alarms.

D:

“Check only that the device hostname is listed in the inventory, without examining mac movement protection behavior” targets a different operation from the reported requirement: “the same tenant MAC oscillates between attachments and causes instability”. MAC move visibility and controls address repeated endpoint relocation or loops in a bridge instance. The confirming result is: MAC learning stabilizes on the intended attachment without recurrent move alarms.

Question 48

In the fictional Canyon-5 west pod, a fabric operations audit prior to tenant onboarding, the team reports that an operator needs live interface operational data rather than only intended settings. A peer suggested: "Read only the saved configuration and assume it proves link status" That did not solve the constraint. What should be chosen instead?

  1. Read only the saved configuration and assume it proves link status.
  2. Check only user role names to determine physical link health.
  3. Replace the interface with a loopback to create an up indicator.
  4. Inspect the operational state datastore or state-oriented CLI view.

Explanation

Correct Answer

D:

Operational state exposes what the system reports now rather than merely requested configuration. For Canyon-5, confirm the actual outcome: the relevant state paths show current link and counter values.

Incorrect Answers

A:

“Read only the saved configuration and assume it proves link status” targets a different operation from the reported requirement: “an operator needs live interface operational data rather than only intended settings”. Operational state exposes what the system reports now rather than merely requested configuration. Use the appropriate method: Inspect the operational state datastore or state-oriented CLI view. Before onboarding, test that the intended fabric state exists.

B:

“Check only user role names to determine physical link health” targets a different operation from the reported requirement: “an operator needs live interface operational data rather than only intended settings”. Operational state exposes what the system reports now rather than merely requested configuration. Use the appropriate method: Inspect the operational state datastore or state-oriented CLI view. Before onboarding, test that the intended fabric state exists.

C:

“Replace the interface with a loopback to create an up indicator” targets a different operation from the reported requirement: “an operator needs live interface operational data rather than only intended settings”. Operational state exposes what the system reports now rather than merely requested configuration. Use the appropriate method: Inspect the operational state datastore or state-oriented CLI view. Before onboarding, test that the intended fabric state exists.

Question 49

In the fictional Ridge-2 west pod, a secondary data hall with tenant isolation requirements, the team reports that a tenant overlay is down but all local access links remain up. A peer suggested: "Delete all tenant VRFs immediately without inspecting transport" That did not solve the constraint. What should be chosen instead?

  1. Validate underlay VTEP reachability before altering EVPN tenant service settings.
  2. Delete all tenant VRFs immediately without inspecting transport.
  3. Modify an interface ACL before isolating whether the tunnel exists.
  4. Treat a physical link LED as proof that remote VTEP routes work.

Explanation

Correct Answer

A:

Underlay IP reachability is a prerequisite for VXLAN overlay traffic. For Ridge-2, confirm the actual outcome: underlay routes to relevant endpoints are viable before overlay control-plane checks.

Incorrect Answers

B:

“Delete all tenant VRFs immediately without inspecting transport” targets a different operation from the reported requirement: “a tenant overlay is down but all local access links remain up”. Underlay IP reachability is a prerequisite for VXLAN overlay traffic. Use the appropriate method: Validate underlay VTEP reachability before altering EVPN tenant service settings.

C:

“Modify an interface ACL before isolating whether the tunnel exists” targets a different operation from the reported requirement: “a tenant overlay is down but all local access links remain up”. Underlay IP reachability is a prerequisite for VXLAN overlay traffic. Use the appropriate method: Validate underlay VTEP reachability before altering EVPN tenant service settings.

D:

“Treat a physical link LED as proof that remote VTEP routes work” targets a different operation from the reported requirement: “a tenant overlay is down but all local access links remain up”. Underlay IP reachability is a prerequisite for VXLAN overlay traffic. Use the appropriate method: Validate underlay VTEP reachability before altering EVPN tenant service settings.

Question 50

In the fictional Harbor-1 east pod, a staged top-of-rack rollout with a bounded maintenance window, the team reports that an underlay path needs rapid failure signaling between configured peers. The planned change is "Configure and verify a supported BFD session for the relevant adjacency." Which post-change observation best validates the intended technical behavior?

  1. Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior.
  2. Verify that the BFD session is up and its failure state correlates with the intended adjacency.
  3. Check only that the device hostname is listed in the inventory, without examining bfd peer detection behavior.
  4. Use an unrelated tenant dashboard as proof, without verifying the required bfd peer detection condition.

Explanation

Correct Answer

B:

BFD supplies protocol-independent rapid path liveliness detection when correctly bound to peers. The option uses “Verify that the BFD session is up and its failure state correlates with the intended adjacency” to address “an underlay path needs rapid failure signaling between configured peers”. The acceptance test is: the BFD session is up and its failure state correlates with the intended adjacency.

Incorrect Answers

A:

“Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior” targets a different operation from the reported requirement: “an underlay path needs rapid failure signaling between configured peers”. BFD supplies protocol-independent rapid path liveliness detection when correctly bound to peers. The confirming result is: the BFD session is up and its failure state correlates with the intended adjacency.

C:

“Check only that the device hostname is listed in the inventory, without examining bfd peer detection behavior” targets a different operation from the reported requirement: “an underlay path needs rapid failure signaling between configured peers”. BFD supplies protocol-independent rapid path liveliness detection when correctly bound to peers. The confirming result is: the BFD session is up and its failure state correlates with the intended adjacency.

D:

“Use an unrelated tenant dashboard as proof, without verifying the required bfd peer detection condition” targets a different operation from the reported requirement: “an underlay path needs rapid failure signaling between configured peers”. BFD supplies protocol-independent rapid path liveliness detection when correctly bound to peers. The confirming result is: the BFD session is up and its failure state correlates with the intended adjacency.

Nokia Data Center Fabric Fundamentals (4A0-D01) Practice Tests