mcAfee Secure Website
exam =5
exam =6

Exam Code: NS0-165

Exam Name: NetApp Certified Data Administrator, ONTAP

Certification Provider: Network Appliance

Corresponding Certification: NCDA ONTAP

Network Appliance NS0-165 Questions & Answers

Reliable & Actual Study Materials for NS0-165 Exam Success

60 Questions & Answers with Testing Engine

"NS0-165: NetApp Certified Data Administrator, ONTAP" Testing Engine covers all the knowledge points of the real Network Appliance NS0-165 exam.

The latest actual NS0-165 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at NS0-165 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Network Appliance Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Network Appliance NS0-165 Practice Test 46

Question 450

A NetApp ONTAP administrator must resolve this situation: One FC fabric disappears after a switch firmware change. Select TWO: the targeted corrective action and its strongest verification. (Select TWO.)

  1. Check target portals, initiator identity, CHAP or other configured authentication, ACLs and TCP reachability when iSCSI login fails.
  2. A controlled path failure leaves the host device online and its multipath utility shows expected surviving paths.
  3. Coordinate ONTAP LUN or namespace capacity changes with host rescan and filesystem growth procedures.
  4. Inspect switch login state, target WWPNs, zoning, HBA health and ONTAP target LIFs before modifying LUN data.
  5. Corrected FC zoning or port state restores expected target visibility and multipathing without touching data blocks.

Explanation

Correct Answers

D:

This is the proposed corrective action for: One FC fabric disappears after a switch firmware change. The action addresses the ONTAP failure mechanism: A fabric path failure can look like inaccessible storage while the ONTAP LUN and volume remain healthy.

E:

This provides separate verification for the same issue: One FC fabric disappears after a switch firmware change. The outcome tests whether remediation is effective and can be recorded as acceptance evidence.

Incorrect Answers

A:

Check target portals, initiator identity, CHAP or other configured authentication, ACLs and TCP reachability when iSCSI login fails. It is not the complementary risk control for fc fabric path and zoning troubleshooting.

B:

A controlled path failure leaves the host device online and its multipath utility shows expected surviving paths. This does not supply the required fc fabric path and zoning troubleshooting action-and-control pair.

C:

Coordinate ONTAP LUN or namespace capacity changes with host rescan and filesystem growth procedures. The paired controls concern fc fabric path and zoning troubleshooting, not that measure.

Question 451

During a storage operations review for a university research storage team, the team observes: An HBA port has no target login although zoning documentation says it should. The decision must maintain shared-client safety and reproducible workloads. What should the storage administrator do first for the stated requirement?

  1. Inspect switch login state, target WWPNs, zoning, HBA health and ONTAP target LIFs before modifying LUN data.
  2. Check target portals, initiator identity, CHAP or other configured authentication, ACLs and TCP reachability when iSCSI login fails.
  3. Configure supported host multipath software and ONTAP SAN paths so failover remains possible and optimized or nonoptimized path states are handled appropriately.
  4. Coordinate ONTAP LUN or namespace capacity changes with host rescan and filesystem growth procedures.

Explanation

Correct Answer

A:

This action addresses the reported ONTAP condition: An HBA port has no target login although zoning documentation says it should. It specifically applies fc fabric path and zoning troubleshooting and mitigates: A fabric path failure can look like inaccessible storage while the ONTAP LUN and volume remain healthy. A practical completion check is: Corrected FC zoning or port state restores expected target visibility and multipathing without touching data blocks.

Incorrect Answers

B:

Check target portals, initiator identity, CHAP or other configured authentication, ACLs and TCP reachability when iSCSI login fails. The configuration must instead establish fc fabric path and zoning troubleshooting.

C:

Configure supported host multipath software and ONTAP SAN paths so failover remains possible and optimized or nonoptimized path states are handled appropriately. The fc fabric path and zoning troubleshooting prerequisite remains unaddressed.

D:

Coordinate ONTAP LUN or namespace capacity changes with host rescan and filesystem growth procedures. It changes a different feature than fc fabric path and zoning troubleshooting.

Question 452

After corrective work for the ONTAP issue 'An HBA port has no target login although zoning documentation says it should', the operator seeks objective signoff. What observable test should the operator require before closing this issue?

  1. Corrected FC zoning or port state restores expected target visibility and multipathing without touching data blocks.
  2. The host detects the intended expanded block device and its filesystem grows without altering unrelated disks.
  3. The initiator logs into the correct target over an allowed network and receives the expected mapped device.
  4. A controlled path failure leaves the host device online and its multipath utility shows expected surviving paths.

Explanation

Correct Answer

A:

This is observable acceptance evidence for: An HBA port has no target login although zoning documentation says it should. It demonstrates the intended ONTAP storage behavior in the relevant situation, rather than merely showing that a configuration field exists.

Incorrect Answers

B:

The host detects the intended expanded block device and its filesystem grows without altering unrelated disks. The fc fabric path and zoning troubleshooting prerequisite remains unaddressed.

C:

The initiator logs into the correct target over an allowed network and receives the expected mapped device. It changes a different feature than fc fabric path and zoning troubleshooting.

D:

A controlled path failure leaves the host device online and its multipath utility shows expected surviving paths. That change would not implement fc fabric path and zoning troubleshooting.

Question 453

During a storage operations review for a regional managed storage service provider, the team observes: A target WWPN is moved to a different fabric and the host scan shows no LUN. The decision must maintain tenant boundaries and documented service commitments. Which engineering choice most directly solves this problem?

  1. Coordinate ONTAP LUN or namespace capacity changes with host rescan and filesystem growth procedures.
  2. Check target portals, initiator identity, CHAP or other configured authentication, ACLs and TCP reachability when iSCSI login fails.
  3. Inspect switch login state, target WWPNs, zoning, HBA health and ONTAP target LIFs before modifying LUN data.
  4. Configure supported host multipath software and ONTAP SAN paths so failover remains possible and optimized or nonoptimized path states are handled appropriately.

Explanation

Correct Answer

C:

This action addresses the reported ONTAP condition: A target WWPN is moved to a different fabric and the host scan shows no LUN. It specifically applies fc fabric path and zoning troubleshooting and mitigates: A fabric path failure can look like inaccessible storage while the ONTAP LUN and volume remain healthy. A practical completion check is: Corrected FC zoning or port state restores expected target visibility and multipathing without touching data blocks.

Incorrect Answers

A:

Coordinate ONTAP LUN or namespace capacity changes with host rescan and filesystem growth procedures. The fc fabric path and zoning troubleshooting prerequisite remains unaddressed.

B:

Check target portals, initiator identity, CHAP or other configured authentication, ACLs and TCP reachability when iSCSI login fails. It changes a different feature than fc fabric path and zoning troubleshooting.

D:

Configure supported host multipath software and ONTAP SAN paths so failover remains possible and optimized or nonoptimized path states are handled appropriately. The configuration must instead establish fc fabric path and zoning troubleshooting.

Question 454

After corrective work for the ONTAP issue 'A target WWPN is moved to a different fabric and the host scan shows no LUN', the operator seeks objective signoff. Which verification is most relevant to the storage problem described?

  1. A controlled path failure leaves the host device online and its multipath utility shows expected surviving paths.
  2. The initiator logs into the correct target over an allowed network and receives the expected mapped device.
  3. Corrected FC zoning or port state restores expected target visibility and multipathing without touching data blocks.
  4. The host detects the intended expanded block device and its filesystem grows without altering unrelated disks.

Explanation

Correct Answer

C:

This is observable acceptance evidence for: A target WWPN is moved to a different fabric and the host scan shows no LUN. It demonstrates the intended ONTAP storage behavior in the relevant situation, rather than merely showing that a configuration field exists.

Incorrect Answers

A:

A controlled path failure leaves the host device online and its multipath utility shows expected surviving paths. The relevant success criterion is fc fabric path and zoning troubleshooting; this measures a different function.

B:

The initiator logs into the correct target over an allowed network and receives the expected mapped device. That result could pass without demonstrating fc fabric path and zoning troubleshooting.

D:

The host detects the intended expanded block device and its filesystem grows without altering unrelated disks. It does not establish the requested fc fabric path and zoning troubleshooting outcome.

Question 455

During a storage operations review for an enterprise disaster recovery review, the team observes: An administrator proposes LUN restoration before checking the FC switch link state. The decision must maintain preservation of recoverable data under controlled change. Which change best corrects the storage design under these conditions?

  1. Check target portals, initiator identity, CHAP or other configured authentication, ACLs and TCP reachability when iSCSI login fails.
  2. Coordinate ONTAP LUN or namespace capacity changes with host rescan and filesystem growth procedures.
  3. Configure supported host multipath software and ONTAP SAN paths so failover remains possible and optimized or nonoptimized path states are handled appropriately.
  4. Inspect switch login state, target WWPNs, zoning, HBA health and ONTAP target LIFs before modifying LUN data.

Explanation

Correct Answer

D:

This action addresses the reported ONTAP condition: An administrator proposes LUN restoration before checking the FC switch link state. It specifically applies fc fabric path and zoning troubleshooting and mitigates: A fabric path failure can look like inaccessible storage while the ONTAP LUN and volume remain healthy. A practical completion check is: Corrected FC zoning or port state restores expected target visibility and multipathing without touching data blocks.

Incorrect Answers

A:

Check target portals, initiator identity, CHAP or other configured authentication, ACLs and TCP reachability when iSCSI login fails. That change would not implement fc fabric path and zoning troubleshooting.

B:

Coordinate ONTAP LUN or namespace capacity changes with host rescan and filesystem growth procedures. The configuration must instead establish fc fabric path and zoning troubleshooting.

C:

Configure supported host multipath software and ONTAP SAN paths so failover remains possible and optimized or nonoptimized path states are handled appropriately. The fc fabric path and zoning troubleshooting prerequisite remains unaddressed.

Question 456

After corrective work for the ONTAP issue 'An administrator proposes LUN restoration before checking the FC switch link state', the operator seeks objective signoff. What evidence would show that the corrective configuration is working?

  1. Corrected FC zoning or port state restores expected target visibility and multipathing without touching data blocks.
  2. The initiator logs into the correct target over an allowed network and receives the expected mapped device.
  3. A controlled path failure leaves the host device online and its multipath utility shows expected surviving paths.
  4. The host detects the intended expanded block device and its filesystem grows without altering unrelated disks.

Explanation

Correct Answer

A:

This is observable acceptance evidence for: An administrator proposes LUN restoration before checking the FC switch link state. It demonstrates the intended ONTAP storage behavior in the relevant situation, rather than merely showing that a configuration field exists.

Incorrect Answers

B:

The initiator logs into the correct target over an allowed network and receives the expected mapped device. It does not establish the requested fc fabric path and zoning troubleshooting outcome.

C:

A controlled path failure leaves the host device online and its multipath utility shows expected surviving paths. The relevant success criterion is fc fabric path and zoning troubleshooting; this measures a different function.

D:

The host detects the intended expanded block device and its filesystem grows without altering unrelated disks. That result could pass without demonstrating fc fabric path and zoning troubleshooting.

Question 457

During a storage operations review for a regional managed storage service provider, the team observes: A Linux client gets permission denied despite NFS service being enabled. The decision must maintain tenant boundaries and documented service commitments. Which ONTAP administration change best addresses the observed failure?

  1. Evaluate both SMB share permissions and underlying NTFS or effective filesystem ACLs for authorized Windows data access.
  2. Configure supported NFS versions and authentication such as Kerberos to match the client and security requirements.
  3. Apply the correct ONTAP NFS export policy with ordered client match, security type and read/write permissions to the target volume.
  4. Configure ONTAP SMB server domain integration, DNS, time synchronization and a reachable authentication service before granting shares.

Explanation

Correct Answer

C:

This action addresses the reported ONTAP condition: A Linux client gets permission denied despite NFS service being enabled. It specifically applies nfs export policy and rule ordering and mitigates: An export can deny authorized clients or overgrant access when an earlier rule matches unexpectedly. A practical completion check is: Permitted hosts mount with the required permissions while an unauthorized host is denied under the expected export rule.

Incorrect Answers

A:

Evaluate both SMB share permissions and underlying NTFS or effective filesystem ACLs for authorized Windows data access. The nfs export policy and rule ordering prerequisite remains unaddressed.

B:

Configure supported NFS versions and authentication such as Kerberos to match the client and security requirements. It changes a different feature than nfs export policy and rule ordering.

D:

Configure ONTAP SMB server domain integration, DNS, time synchronization and a reachable authentication service before granting shares. The configuration must instead establish nfs export policy and rule ordering.

Question 458

A NetApp ONTAP change review identifies: A Linux client gets permission denied despite NFS service being enabled. Which unresolved risk most directly follows from the observed condition?

  1. An export can deny authorized clients or overgrant access when an earlier rule matches unexpectedly.
  2. A created SMB share is not usable for domain principals when SVM authentication prerequisites fail.
  3. A version or security-flavor mismatch can block mounting or allow weaker authentication than policy permits.
  4. A permissive share does not override restrictive file permissions, and an open share can still expose unintended paths.

Explanation

Correct Answer

A:

This is the directly implicated exposure when a Linux client gets permission denied despite NFS service being enabled. The relevant corrective control is: Apply the correct ONTAP NFS export policy with ordered client match, security type and read/write permissions to the target volume. A meaningful acceptance test is: Permitted hosts mount with the required permissions while an unauthorized host is denied under the expected export rule.

Incorrect Answers

B:

A created SMB share is not usable for domain principals when SVM authentication prerequisites fail. It does not retain the nfs export policy and rule ordering control over time.

C:

A version or security-flavor mismatch can block mounting or allow weaker authentication than policy permits. Recurrence here depends on nfs export policy and rule ordering, not this safeguard.

D:

A permissive share does not override restrictive file permissions, and an open share can still expose unintended paths. That protection can exist while nfs export policy and rule ordering is still missing.

Question 459

During a storage operations review for an enterprise disaster recovery review, the team observes: An export rule for a broad subnet precedes a stricter host rule. The decision must maintain preservation of recoverable data under controlled change. What should the storage administrator do first for the stated requirement?

  1. Apply the correct ONTAP NFS export policy with ordered client match, security type and read/write permissions to the target volume.
  2. Evaluate both SMB share permissions and underlying NTFS or effective filesystem ACLs for authorized Windows data access.
  3. Configure supported NFS versions and authentication such as Kerberos to match the client and security requirements.
  4. Configure ONTAP SMB server domain integration, DNS, time synchronization and a reachable authentication service before granting shares.

Explanation

Correct Answer

A:

This action addresses the reported ONTAP condition: An export rule for a broad subnet precedes a stricter host rule. It specifically applies nfs export policy and rule ordering and mitigates: An export can deny authorized clients or overgrant access when an earlier rule matches unexpectedly. A practical completion check is: Permitted hosts mount with the required permissions while an unauthorized host is denied under the expected export rule.

Incorrect Answers

B:

Evaluate both SMB share permissions and underlying NTFS or effective filesystem ACLs for authorized Windows data access. The configuration must instead establish nfs export policy and rule ordering.

C:

Configure supported NFS versions and authentication such as Kerberos to match the client and security requirements. The nfs export policy and rule ordering prerequisite remains unaddressed.

D:

Configure ONTAP SMB server domain integration, DNS, time synchronization and a reachable authentication service before granting shares. It changes a different feature than nfs export policy and rule ordering.

Question 460

A NetApp ONTAP administrator must resolve this situation: An export rule for a broad subnet precedes a stricter host rule. Which TWO choices form a defensible remediation-and-acceptance pair? (Select TWO.)

  1. Configure ONTAP SMB server domain integration, DNS, time synchronization and a reachable authentication service before granting shares.
  2. Evaluate both SMB share permissions and underlying NTFS or effective filesystem ACLs for authorized Windows data access.
  3. Apply the correct ONTAP NFS export policy with ordered client match, security type and read/write permissions to the target volume.
  4. The client negotiates the mandated NFS protocol and security flavor and performs an authorized read/write test.
  5. Permitted hosts mount with the required permissions while an unauthorized host is denied under the expected export rule.

Explanation

Correct Answers

C:

This is the proposed corrective action for: An export rule for a broad subnet precedes a stricter host rule. The action addresses the ONTAP failure mechanism: An export can deny authorized clients or overgrant access when an earlier rule matches unexpectedly.

E:

This provides separate verification for the same issue: An export rule for a broad subnet precedes a stricter host rule. The outcome tests whether remediation is effective and can be recorded as acceptance evidence.

Incorrect Answers

A:

Configure ONTAP SMB server domain integration, DNS, time synchronization and a reachable authentication service before granting shares. The paired controls concern nfs export policy and rule ordering, not that measure.

B:

Evaluate both SMB share permissions and underlying NTFS or effective filesystem ACLs for authorized Windows data access. The nfs export policy and rule ordering implementation and safeguard are still missing.

D:

The client negotiates the mandated NFS protocol and security flavor and performs an authorized read/write test. This does not supply the required nfs export policy and rule ordering action-and-control pair.

NetApp Certified Data Administrator, ONTAP (NS0-165) Practice Tests