mcAfee Secure Website
23

Microsoft MB-330 Bundle

Exam Code: MB-330

Exam Name Microsoft Dynamics 365 Supply Chain Management

Certification Provider: Microsoft

Corresponding Certification: Microsoft Certified: Dynamics 365 Supply Chain Management Functional Consultant Associate

MB-330 Training Materials $25.00

Reliable & Actual Study Materials for MB-330 Exam Success

The Latest MB-330 Exam Questions as Experienced in the Actual Test!

  • 24
    Questions & Answers

    MB-330 Questions & Answers

    464 Questions & Answers

    Includes questions types found on actual exam such as drag and drop, simulation, type in, and fill in the blank.

  • 25
    MB-330 Video Course

    MB-330 Training Course

    5 Video Lectures

    Based on Real Life Scenarios which you will encounter in exam and learn by working with real equipment.

exam =32

Microsoft Dynamics 365 Supply Chain Management (MB-330) Practice Tests

Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Microsoft Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Total Cost: $164.98
Bundle Price: $139.98

Purchase Individually

  • exam =34
    Questions & Answers

    Questions & Answers

    464 Questions

    $124.99
    exam =35
  • exam =37
    MB-330 Video Course

    Training Course

    5 Video Lectures

    $39.99

Microsoft MB-330 Practice Test 52

Question 510

A project team is about to close this Dynamics 365 issue: A planner changes a product's coverage group while a prior planning run remains the source of the team's spreadsheet. Which assumption would be particularly unsafe for this resolution?

  1. Using stale exported planned orders as proof the revised policy has no effect.
  2. Assuming a planned purchase order already constitutes a supplier contract.
  3. Treating a delay message as an automatic final customer delivery promise.
  4. Using a single cumulative stock figure as proof that every intermediate period is covered.

Explanation

Correct Answer

A:

The unsafe assumption is: Using stale exported planned orders as proof the revised policy has no effect. In the scenario, A planner changes a product's coverage group while a prior planning run remains the source of the team's spreadsheet. The appropriate controlled response is Rerun the correct planning engine and re-export results after the approved policy change. Rejecting that shortcut preserves the business rule, data integrity, or audit trail the implementation is supposed to support.

Incorrect Answers

B:

Assuming a planned purchase order already constitutes a supplier contract. The check concerns assuming a planned purchase order already constitutes a supplier contract, not confirming that using stale exported planned orders as proof the revised policy has no effect.

C:

Treating a delay message as an automatic final customer delivery promise. This assesses treating a delay message as an automatic final customer delivery promise; it does not determine the reported condition—a planner changes a product's coverage group while a prior planning run remains the source of the team's spreadsheet.

D:

Using a single cumulative stock figure as proof that every intermediate period is covered. The case-specific requirement is confirming that using stale exported planned orders as proof the revised policy has no effect, which that option does not establish.

Question 511

While diagnosing the following exception — A sales order has several shipments with different promised dates but dispatch planning combines them into one late load — a stakeholder suggests skipping validation. Which assumption presents the key case-specific risk?

  1. Changing a product's storage dimension group to correct a transport appointment mismatch.
  2. Issuing an arbitrary general-ledger journal as a substitute for freight billing detail.
  3. Combining all loads for lower transport cost while ignoring contractual arrival dates.
  4. Treating one warehouse's bin location as an external freight route plan.

Explanation

Correct Answer

C:

The unsafe assumption is: Combining all loads for lower transport cost while ignoring contractual arrival dates. In the scenario, A sales order has several shipments with different promised dates but dispatch planning combines them into one late load. The appropriate controlled response is Split or plan the loads to honor eligible shipments and delivery commitments. Rejecting that shortcut preserves the business rule, data integrity, or audit trail the implementation is supposed to support.

Incorrect Answers

A:

Changing a product's storage dimension group to correct a transport appointment mismatch. The check concerns changing a product's storage dimension group to correct a transport appointment mismatch, not confirming that combining all loads for lower transport cost while ignoring contractual arrival dates.

B:

Issuing an arbitrary general-ledger journal as a substitute for freight billing detail. This assesses issuing an arbitrary general-ledger journal as a substitute for freight billing detail; it does not determine the reported condition—while diagnosing the following exception — A sales order has several shipments with different promised dates but dispatch planning combines them into one.

D:

Treating one warehouse's bin location as an external freight route plan. The case-specific requirement is confirming that combining all loads for lower transport cost while ignoring contractual arrival dates, which that option does not establish.

Question 512

The business raises this issue: A vendor ships one PO in three batches across different arrival dates with separate unloading priorities. The investigation has established the following evidence: Inspect delivery schedule lines, quantities, and corresponding receipt commitments. Which configuration or transaction step best addresses the requirement?

  1. Use a request for quotation process and accept the selected vendor bid.
  2. Enable vendor collaboration for the authorized supplier and scope its PO interactions.
  3. Maintain the purchase order delivery schedule for the staged arrivals.
  4. Use controlled purchase order change and confirmation processing after appropriate review.

Explanation

Correct Answer

C:

The supported next step is: Maintain the purchase order delivery schedule for the staged arrivals. The observed requirement is A vendor ships one PO in three batches across different arrival dates with separate unloading priorities. The diagnostic check was: Inspect delivery schedule lines, quantities, and corresponding receipt commitments. This connects the recommended action to the actual system state, so the consultant changes the relevant supply-chain process rather than an unrelated setup area.

Incorrect Answers

A:

Use a request for quotation process and accept the selected vendor bid. That alternative is checked by reviewing the RFQ case, vendor invitations, responses, and award criteria; the actual requirement instead calls for inspecting delivery schedule lines, quantities, and corresponding receipt commitments.

B:

Enable vendor collaboration for the authorized supplier and scope its PO interactions. Checking vendor collaboration onboarding, role access, and supported confirmation workflow tests that mechanism, but it does not establish the reported condition—a vendor ships one PO in three batches across different arrival dates with separate unloading priorities.

D:

Use controlled purchase order change and confirmation processing after appropriate review. Its technical evidence involves comparing the supplier's response with approved PO quantities, prices, and delivery conditions. For the stated question, inspecting delivery schedule lines, quantities, and corresponding receipt commitments is the more relevant test.

Question 513

The business raises this issue: An imported goods voyage includes several POs and suppliers but freight must be allocated under an agreed weight basis. The investigation has established the following evidence: Compare voyage line values, quantity, weight data, and freight apportionment settings. Which configuration or transaction step best addresses the requirement?

  1. Create an appropriate transfer voyage and add applicable freight cost estimates.
  2. Reconcile actual landed cost against estimates using the supported adjustment process.
  3. Create a landed cost voyage with the required journey stages and shipment references.
  4. Choose and configure the correct landed cost apportionment method for the voyage.

Explanation

Correct Answer

D:

The supported next step is: Choose and configure the correct landed cost apportionment method for the voyage. The observed requirement is An imported goods voyage includes several POs and suppliers but freight must be allocated under an agreed weight basis. The diagnostic check was: Compare voyage line values, quantity, weight data, and freight apportionment settings. This connects the recommended action to the actual system state, so the consultant changes the relevant supply-chain process rather than an unrelated setup area.

Incorrect Answers

A:

Create an appropriate transfer voyage and add applicable freight cost estimates. That alternative can be assessed by checking landed cost support for transfer-order-linked voyages and eligible cost categories; the actual requirement instead calls for comparing voyage line values, quantity, weight data, and freight apportionment settings.

B:

Reconcile actual landed cost against estimates using the supported adjustment process. Comparing voyage estimated costs, actual invoice charges, and settlement or adjustment rules tests that mechanism, but it does not establish the reported condition—an imported goods voyage includes several POs and suppliers but freight must be allocated under an agreed weight basis.

C:

Create a landed cost voyage with the required journey stages and shipment references. Its technical evidence involves checking the voyage, shipping container, journey template, and applicable voyage status configuration. For the stated question, comparing voyage line values, quantity, weight data, and freight apportionment settings is the more relevant test.

Question 514

A project team is about to close this Dynamics 365 issue: A planning run generates a planned purchase order, but procurement needs a real vendor commitment. Which assumption would be particularly unsafe for this resolution?

  1. Assuming calculating a safety stock journal proposal immediately changes live item coverage.
  2. Assuming a planned purchase order already constitutes a supplier contract.
  3. Using stale exported planned orders as proof the revised policy has no effect.
  4. Creating a vendor PO for demand whose approved supply source is an internal warehouse.

Explanation

Correct Answer

B:

The unsafe assumption is: Assuming a planned purchase order already constitutes a supplier contract. In the scenario, A planning run generates a planned purchase order, but procurement needs a real vendor commitment. The appropriate controlled response is Evaluate and firm the approved planned purchase order into a purchasing document. Rejecting that shortcut preserves the business rule, data integrity, or audit trail the implementation is supposed to support.

Incorrect Answers

A:

Assuming calculating a safety stock journal proposal immediately changes live item coverage. The check concerns assuming calculating a safety stock journal proposal immediately changes live item coverage, not confirming that assuming a planned purchase order already constitutes a supplier contract.

C:

Using stale exported planned orders as proof the revised policy has no effect. This assesses using stale exported planned orders as proof the revised policy has no effect; it does not determine the reported condition—a planning run generates a planned purchase order, but procurement needs a real vendor commitment.

D:

Creating a vendor PO for demand whose approved supply source is an internal warehouse. The case-specific requirement is confirming that assuming a planned purchase order already constitutes a supplier contract, which that option does not establish.

Question 515

The current Dynamics 365 process fails to meet this requirement: A plant receives purchase stock at the dock but the receipt must be registered before the vendor's invoice arrives. The investigation is complete. Which operational change provides the right fix?

  1. Apply manual inventory blocking to the affected stock and release it only after authorization.
  2. Assign an appropriate batch disposition code and enforce its permitted transaction behavior.
  3. Configure a cycle counting approach that rotates inventory coverage based on risk and operational rules.
  4. Use item arrival or registration and the supported product receipt workflow for physical receipt.

Explanation

Correct Answer

D:

The supported next step is: Use item arrival or registration and the supported product receipt workflow for physical receipt. The observed requirement is A plant receives purchase stock at the dock but the receipt must be registered before the vendor's invoice arrives. The diagnostic check was: Check arrival registration and product receipt status instead of treating invoicing as physical arrival. This connects the recommended action to the actual system state, so the consultant changes the relevant supply-chain process rather than an unrelated setup area.

Incorrect Answers

A:

Apply manual inventory blocking to the affected stock and release it only after authorization. That alternative can be assessed by checking inventory blocking and disposition controls for the exact batch and site; the actual requirement instead calls for checking arrival registration and product receipt status instead of treating invoicing as physical arrival.

B:

Assign an appropriate batch disposition code and enforce its permitted transaction behavior. Inspecting batch disposition codes and allowed transaction use for restricted batches tests that mechanism, but it does not establish the reported condition—a plant receives purchase stock at the dock but the receipt must be registered before the vendor's invoice arrives.

C:

Configure a cycle counting approach that rotates inventory coverage based on risk and operational rules. Its technical evidence involves comparing counting policies, location coverage, and existing count work or journals. For the stated question, checking arrival registration and product receipt status instead of treating invoicing as physical arrival is the more relevant test.

Question 516

While diagnosing the following exception — A picker must verify a damaged package during a normal pick without losing the parent work context — a stakeholder suggests skipping validation. Which assumption presents the key case-specific risk?

  1. Replacing the entire pick workflow whenever an occasional exception needs inspection.
  2. Sharing one existing worker identity across all seasonal warehouse handhelds.
  3. Retaining broad historical worker permissions indefinitely after a role change.
  4. Removing required batch or quantity validation solely to make screens shorter.

Explanation

Correct Answer

A:

The unsafe assumption is: Replacing the entire pick workflow whenever an occasional exception needs inspection. In the scenario, A picker must verify a damaged package during a normal pick without losing the parent work context. The appropriate controlled response is Configure an appropriate mobile device detour for the inspection step. Rejecting that shortcut preserves the business rule, data integrity, or audit trail the implementation is supposed to support.

Incorrect Answers

B:

Sharing one existing worker identity across all seasonal warehouse handhelds. The check concerns sharing one existing worker identity across all seasonal warehouse handhelds, not confirming that replacing the entire pick workflow whenever an occasional exception needs inspection.

C:

Retaining broad historical worker permissions indefinitely after a role change. This assesses retaining broad historical worker permissions indefinitely after a role change; it does not determine the reported condition—while diagnosing the following exception — A picker must verify a damaged package during a normal pick without losing the parent work context — a.

D:

Removing required batch or quantity validation solely to make screens shorter. The case-specific requirement is confirming that replacing the entire pick workflow whenever an occasional exception needs inspection, which that option does not establish.

Question 517

The current Dynamics 365 process fails to meet this requirement: A factory records motor breakdowns but supervisors cannot distinguish emergency response from scheduled servicing. The investigation is complete. Which operational change provides the right fix?

  1. Configure resource capacity and scheduling constraints for the maintenance work orders.
  2. Configure work order types or settings that distinguish reactive and preventive work.
  3. Update authorized location or responsibility fields without recreating the physical asset.
  4. Create appropriate asset types and associate equipment with the correct type.

Explanation

Correct Answer

B:

The supported next step is: Configure work order types or settings that distinguish reactive and preventive work. The observed requirement is A factory records motor breakdowns but supervisors cannot distinguish emergency response from scheduled servicing. The diagnostic check was: Inspect work order type definitions, job categories, and maintenance policies. This connects the recommended action to the actual system state, so the consultant changes the relevant supply-chain process rather than an unrelated setup area.

Incorrect Answers

A:

Configure resource capacity and scheduling constraints for the maintenance work orders. That alternative is checked by inspecting available resource calendars, competencies, and scheduling capacity for work orders; the actual requirement instead calls for inspecting work order type definitions, job categories, and maintenance policies.

C:

Update authorized location or responsibility fields without recreating the physical asset. Reviewing asset identification, type, lifecycle and functional-location association tests that mechanism, but it does not establish the reported condition—a factory records motor breakdowns but supervisors cannot distinguish emergency response from scheduled servicing.

D:

Create appropriate asset types and associate equipment with the correct type. Its technical evidence involves reviewing asset types and the asset attributes needed by each equipment class. For the stated question, inspecting work order type definitions, job categories, and maintenance policies is the more relevant test.

Question 518

A project team is about to close this Dynamics 365 issue: A planner wants monthly supply schedule columns for one product family rather than daily buckets. Which assumption would be particularly unsafe for this resolution?

  1. Cancelling every early supply order solely because one demand date moved.
  2. Changing actual transaction dates solely to make a planning report monthly.
  3. Running exploratory scenarios in the only approved operational master plan without controls.
  4. Adding a new supply order to hide double-counted forecast demand.

Explanation

Correct Answer

B:

The unsafe assumption is: Changing actual transaction dates solely to make a planning report monthly. In the scenario, A planner wants monthly supply schedule columns for one product family rather than daily buckets. The appropriate controlled response is Configure a period template with appropriate monthly buckets and apply it to the view. Rejecting that shortcut preserves the business rule, data integrity, or audit trail the implementation is supposed to support.

Incorrect Answers

A:

Cancelling every early supply order solely because one demand date moved. The check concerns cancelling every early supply order solely because one demand date moved, not confirming that changing actual transaction dates solely to make a planning report monthly.

C:

Running exploratory scenarios in the only approved operational master plan without controls. This assesses running exploratory scenarios in the only approved operational master plan without controls; it does not determine the reported condition—a planner wants monthly supply schedule columns for one product family rather than daily buckets.

D:

Adding a new supply order to hide double-counted forecast demand. The case-specific requirement is confirming that changing actual transaction dates solely to make a planning report monthly, which that option does not establish.

Question 519

A functional consultant has confirmed the following condition: A retailer prints product labels at receiving but license plate scan labels omit a scannable container identifier. The relevant check is: Inspect label layout, label type, license plate ID fields, and print trigger. What should the team implement or process?

  1. Assign appropriate location profiles and capacity rules to the different zones.
  2. Update outbound work routing for the approved dock and staging area.
  3. Configure temperature-appropriate locations and location directives for receipt work.
  4. Configure the required label format and printing workflow for license plates.

Explanation

Correct Answer

D:

The supported next step is: Configure the required label format and printing workflow for license plates. The observed requirement is A retailer prints product labels at receiving but license plate scan labels omit a scannable container identifier. The diagnostic check was: Inspect label layout, label type, license plate ID fields, and print trigger. This connects the recommended action to the actual system state, so the consultant changes the relevant supply-chain process rather than an unrelated setup area.

Incorrect Answers

A:

Assign appropriate location profiles and capacity rules to the different zones. That alternative is checked by comparing location profile capacity, location types, and product storage characteristics; the actual requirement instead calls for inspecting label layout, label type, license plate ID fields, and print trigger.

B:

Update outbound work routing for the approved dock and staging area. Inspecting outbound shipment work templates and put location directives tests that mechanism, but it does not establish the reported condition—a retailer prints product labels at receiving but license plate scan labels omit a scannable container identifier.

C:

Configure temperature-appropriate locations and location directives for receipt work. Its technical evidence involves reviewing location zones, profiles, product handling constraints, and put-away directive queries. For the stated question, inspecting label layout, label type, license plate ID fields, and print trigger is the more relevant test.

Question 520

The consultant reviews potential shortcuts after learning that a team needs to correct the financial value of an item after a costing review without fabricating a physical receipt. Which belief must be challenged to avoid a misleading or uncontrolled result?

  1. Posting fictitious purchase receipts just to increase inventory value.
  2. Blocking the entire product globally when only one batch is under investigation.
  3. Assuming shipping a transfer order automatically means the destination has received it.
  4. Waiting for a vendor invoice to record every physical arrival.

Explanation

Correct Answer

A:

The unsafe assumption is: Posting fictitious purchase receipts just to increase inventory value. In the scenario, A team needs to correct the financial value of an item after a costing review without fabricating a physical receipt. The appropriate controlled response is Use the appropriate inventory valuation adjustment workflow with approval and traceability. Rejecting that shortcut preserves the business rule, data integrity, or audit trail the implementation is supposed to support.

Incorrect Answers

B:

Blocking the entire product globally when only one batch is under investigation. The check concerns blocking the entire product globally when only one batch is under investigation, not confirming that posting fictitious purchase receipts just to increase inventory value.

C:

Assuming shipping a transfer order automatically means the destination has received it. This assesses assuming shipping a transfer order automatically means the destination has received it; it does not determine the reported condition—the consultant reviews potential shortcuts after learning that a team needs to correct the financial value of an item after a costing review without.

D:

Waiting for a vendor invoice to record every physical arrival. The case-specific requirement is confirming that posting fictitious purchase receipts just to increase inventory value, which that option does not establish.