mcAfee Secure Website
23

Microsoft MB-330 Bundle

Exam Code: MB-330

Exam Name Microsoft Dynamics 365 Supply Chain Management

Certification Provider: Microsoft

Corresponding Certification: Microsoft Certified: Dynamics 365 Supply Chain Management Functional Consultant Associate

MB-330 Training Materials $25.00

Reliable & Actual Study Materials for MB-330 Exam Success

The Latest MB-330 Exam Questions as Experienced in the Actual Test!

  • 24
    Questions & Answers

    MB-330 Questions & Answers

    464 Questions & Answers

    Includes questions types found on actual exam such as drag and drop, simulation, type in, and fill in the blank.

  • 25
    MB-330 Video Course

    MB-330 Training Course

    5 Video Lectures

    Based on Real Life Scenarios which you will encounter in exam and learn by working with real equipment.

exam =32

Microsoft Dynamics 365 Supply Chain Management (MB-330) Practice Tests

Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Microsoft Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Total Cost: $164.98
Bundle Price: $139.98

Purchase Individually

  • exam =34
    Questions & Answers

    Questions & Answers

    464 Questions

    $124.99
    exam =35
  • exam =37
    MB-330 Video Course

    Training Course

    5 Video Lectures

    $39.99

Microsoft MB-330 Practice Test 26

Question 250

The business raises this issue: A distributor replenishes fast-moving goods daily but uses the same procurement policy as slow-moving capital spares. The investigation has established the following evidence: Review coverage groups, procurement lead times, and item-specific demand characteristics. Which configuration or transaction step best addresses the requirement?

  1. Configure suitable demand forecast consumption settings and verify firm-order treatment.
  2. Assign suitable coverage groups and item coverage overrides to each inventory class.
  3. Configure the applicable planning safety margins to protect intended lead-time buffers.
  4. Configure min/max item coverage with authorized replenishment thresholds.

Explanation

Correct Answer

B:

The supported next step is: Assign suitable coverage groups and item coverage overrides to each inventory class. The observed requirement is A distributor replenishes fast-moving goods daily but uses the same procurement policy as slow-moving capital spares. The diagnostic check was: Review coverage groups, procurement lead times, and item-specific demand characteristics. This connects the recommended action to the actual system state, so the consultant changes the relevant supply-chain process rather than an unrelated setup area.

Incorrect Answers

A:

Configure suitable demand forecast consumption settings and verify firm-order treatment. That alternative is checked by inspecting forecast consumption and master planning parameters for the relevant plan; the actual requirement instead calls for reviewing coverage groups, procurement lead times, and item-specific demand characteristics.

C:

Configure the applicable planning safety margins to protect intended lead-time buffers. Inspecting receipt margin, issue margin, and reordering margin versus stated process timing tests that mechanism, but it does not establish the reported condition—a distributor replenishes fast-moving goods daily but uses the same procurement policy as slow-moving capital spares.

D:

Configure min/max item coverage with authorized replenishment thresholds. Its technical evidence involves inspecting item coverage code, minimum, maximum, and effective planning dimensions. For the stated question, reviewing coverage groups, procurement lead times, and item-specific demand characteristics is the more relevant test.

Question 251

A functional consultant has confirmed the following condition: A large hospital loans portable test devices between departments and must track who has temporary possession. The relevant check is: Review asset loans, custody dates, and return steps for the shared equipment. What should the team implement or process?

  1. Configure work order defaults and assignments for the approved maintenance process.
  2. Configure resource capacity and scheduling constraints for the maintenance work orders.
  3. Use asset loan functionality to record assignments and expected returns.
  4. Adjust the work order scheduling requirements and approved maintenance window.

Explanation

Correct Answer

C:

The supported next step is: Use asset loan functionality to record assignments and expected returns. The observed requirement is A large hospital loans portable test devices between departments and must track who has temporary possession. The diagnostic check was: Review asset loans, custody dates, and return steps for the shared equipment. This connects the recommended action to the actual system state, so the consultant changes the relevant supply-chain process rather than an unrelated setup area.

Incorrect Answers

A:

Configure work order defaults and assignments for the approved maintenance process. That alternative is checked by inspecting work order settings and relevant asset type or maintenance setup; the actual requirement instead calls for reviewing asset loans, custody dates, and return steps for the shared equipment.

B:

Configure resource capacity and scheduling constraints for the maintenance work orders. Inspecting available resource calendars, competencies, and scheduling capacity for work orders tests that mechanism, but it does not establish the reported condition—a large hospital loans portable test devices between departments and must track who has temporary possession.

D:

Adjust the work order scheduling requirements and approved maintenance window. Its technical evidence involves inspecting work order scheduling settings, resource availability, and planned downtime constraints. For the stated question, reviewing asset loans, custody dates, and return steps for the shared equipment is the more relevant test.

Question 252

The business raises this issue: A warehouse needs an item filter code to direct hazardous goods into a specific handling lane. The investigation has established the following evidence: Inspect warehouse product filter code definitions and matching workflow rules. Which configuration or transaction step best addresses the requirement?

  1. Configure the intended filter codes and compatible warehouse location or work selection conditions.
  2. Maintain scoped default order rules for the relevant sites and order types.
  3. Configure purchase minimum and multiple quantity rules on the relevant released item.
  4. Assign valid barcode or GTIN identifiers to the intended product and variants.

Explanation

Correct Answer

A:

The supported next step is: Configure the intended filter codes and compatible warehouse location or work selection conditions. The observed requirement is A warehouse needs an item filter code to direct hazardous goods into a specific handling lane. The diagnostic check was: Inspect warehouse product filter code definitions and matching workflow rules. This connects the recommended action to the actual system state, so the consultant changes the relevant supply-chain process rather than an unrelated setup area.

Incorrect Answers

B:

Maintain scoped default order rules for the relevant sites and order types. That alternative is checked by inspecting the item default order settings scope by site and purchase or sales context; the actual requirement instead calls for inspecting warehouse product filter code definitions and matching workflow rules.

C:

Configure purchase minimum and multiple quantity rules on the relevant released item. Inspecting the item default order settings and the effective quantity constraints tests that mechanism, but it does not establish the reported condition—a warehouse needs an item filter code to direct hazardous goods into a specific handling lane.

D:

Assign valid barcode or GTIN identifiers to the intended product and variants. Its technical evidence involves inspecting barcode setup, GTIN ownership, product identifiers, and variant associations. For the stated question, inspecting warehouse product filter code definitions and matching workflow rules is the more relevant test.

Question 253

A business process change is proposed because a site needs a different reorder policy for a specific item than the global coverage group supplies. Which assertion is most likely to undermine the intended control or transaction outcome?

  1. Changing a shared coverage group for a one-item exception without checking other members.
  2. Assuming one shared coverage policy produces sound supply decisions for unrelated product classes.
  3. Adding a new supply order to hide double-counted forecast demand.
  4. Treating negative days as an automatic guarantee that all late orders are acceptable.

Explanation

Correct Answer

A:

The unsafe assumption is: Changing a shared coverage group for a one-item exception without checking other members. In the scenario, A site needs a different reorder policy for a specific item than the global coverage group supplies. The appropriate controlled response is Maintain an item-specific coverage override for the affected site and item. Rejecting that shortcut preserves the business rule, data integrity, or audit trail the implementation is supposed to support.

Incorrect Answers

B:

Assuming one shared coverage policy produces sound supply decisions for unrelated product classes. The check concerns assuming one shared coverage policy produces sound supply decisions for unrelated product classes, not confirming that changing a shared coverage group for a one-item exception without checking other members.

C:

Adding a new supply order to hide double-counted forecast demand. This assesses adding a new supply order to hide double-counted forecast demand; it does not determine the reported condition—a business process change is proposed because a site needs a different reorder policy for a specific item than the global coverage group supplies.

D:

Treating negative days as an automatic guarantee that all late orders are acceptable. The case-specific requirement is confirming that changing a shared coverage group for a one-item exception without checking other members, which that option does not establish.

Question 254

A project team must resolve this supply-chain problem: A purchase order submitted above the department spending threshold skips its required second approver. After completing this check — Review conditional workflow rules, approval roles, and currency threshold interpretation — which supported action is best suited to the case?

  1. Enable vendor collaboration for the authorized supplier and scope its PO interactions.
  2. Configure purchasing workflow escalation based on the intended amount and policy.
  3. Use consignment replenishment and authorized ownership-change transactions upon consumption.
  4. Create the vendor master with correct group and purchasing controls.

Explanation

Correct Answer

B:

The supported next step is: Configure purchasing workflow escalation based on the intended amount and policy. The observed requirement is A purchase order submitted above the department spending threshold skips its required second approver. The diagnostic check was: Review conditional workflow rules, approval roles, and currency threshold interpretation. This connects the recommended action to the actual system state, so the consultant changes the relevant supply-chain process rather than an unrelated setup area.

Incorrect Answers

A:

Enable vendor collaboration for the authorized supplier and scope its PO interactions. That alternative can be assessed by checking vendor collaboration onboarding, role access, and supported confirmation workflow; the actual requirement instead calls for reviewing conditional workflow rules, approval roles, and currency threshold interpretation.

C:

Use consignment replenishment and authorized ownership-change transactions upon consumption. Verifying consignment ownership and replenishment order requirements before receipt tests that mechanism, but it does not establish the reported condition—a purchase order submitted above the department spending threshold skips its required second approver.

D:

Create the vendor master with correct group and purchasing controls. Its technical evidence involves inspecting vendor account setup, groups, posting profiles, and relevant purchasing policies. For the stated question, reviewing conditional workflow rules, approval roles, and currency threshold interpretation is the more relevant test.

Question 255

While diagnosing the following exception — A maintenance business needs separate classes of pumps and compressors, each with its own expected maintenance metadata — a stakeholder suggests skipping validation. Which assumption presents the key case-specific risk?

  1. Assuming a newly created record automatically represents commissioned equipment.
  2. Classifying all work as planned maintenance because each order was eventually scheduled.
  3. Relying on verbal instructions instead of configuring repeatable work order defaults.
  4. Modeling every pump as a unique asset type when it is only another asset instance.

Explanation

Correct Answer

D:

The unsafe assumption is: Modeling every pump as a unique asset type when it is only another asset instance. In the scenario, A maintenance business needs separate classes of pumps and compressors, each with its own expected maintenance metadata. The appropriate controlled response is Create appropriate asset types and associate equipment with the correct type. Rejecting that shortcut preserves the business rule, data integrity, or audit trail the implementation is supposed to support.

Incorrect Answers

A:

Assuming a newly created record automatically represents commissioned equipment. The check concerns assuming a newly created record automatically represents commissioned equipment, not confirming that modeling every pump as a unique asset type when it is only another asset instance.

B:

Classifying all work as planned maintenance because each order was eventually scheduled. This assesses classifying all work as planned maintenance because each order was eventually scheduled; it does not determine the reported condition—while diagnosing the following exception — A maintenance business needs separate classes of pumps and compressors, each with its own expected maintenance.

C:

Relying on verbal instructions instead of configuring repeatable work order defaults. The case-specific requirement is confirming that modeling every pump as a unique asset type when it is only another asset instance, which that option does not establish.

Question 256

A functional consultant has confirmed the following condition: A supplier's component fails inspection and the quality team needs a recorded defect category and remediation action. The relevant check is: Review the distinction between quality order test results and nonconformance management records. What should the team implement or process?

  1. Record the defect and approved correction work under nonconformance management.
  2. Create a nonconformance linked to the affected purchase or inventory record with a disposition.
  3. Quarantine or block the specific failed inventory population and document the decision.
  4. Configure a purchase-related quality association that generates the required quality orders.

Explanation

Correct Answer

B:

The supported next step is: Create a nonconformance linked to the affected purchase or inventory record with a disposition. The observed requirement is A supplier's component fails inspection and the quality team needs a recorded defect category and remediation action. The diagnostic check was: Review the distinction between quality order test results and nonconformance management records. This connects the recommended action to the actual system state, so the consultant changes the relevant supply-chain process rather than an unrelated setup area.

Incorrect Answers

A:

Record the defect and approved correction work under nonconformance management. That alternative is checked by inspecting nonconformance and correction task setup including supplier association and costs; the actual requirement instead calls for reviewing the distinction between quality order test results and nonconformance management records.

C:

Quarantine or block the specific failed inventory population and document the decision. Inspecting the test failure's item, batch, status, and disposition scope tests that mechanism, but it does not establish the reported condition—a supplier's component fails inspection and the quality team needs a recorded defect category and remediation action.

D:

Configure a purchase-related quality association that generates the required quality orders. Its technical evidence involves reviewing quality associations for vendor, item, inventory reference, and event conditions. For the stated question, reviewing the distinction between quality order test results and nonconformance management records is the more relevant test.

Question 257

A project team must resolve this supply-chain problem: An enterprise must sell only to vetted customer accounts with approved credit and payment settings. After completing this check — Inspect customer master, customer group, credit limits, and sales order eligibility — which supported action is best suited to the case?

  1. Configure the intercompany order relationship and create linked sales and purchase orders.
  2. Use a supported CTP approach with capacity or production feasibility where configured.
  3. Maintain the customer account with appropriate commercial and financial controls.
  4. Use a sales quotation and convert it to an order only after the customer accepts terms.

Explanation

Correct Answer

C:

The supported next step is: Maintain the customer account with appropriate commercial and financial controls. The observed requirement is An enterprise must sell only to vetted customer accounts with approved credit and payment settings. The diagnostic check was: Inspect customer master, customer group, credit limits, and sales order eligibility. This connects the recommended action to the actual system state, so the consultant changes the relevant supply-chain process rather than an unrelated setup area.

Incorrect Answers

A:

Configure the intercompany order relationship and create linked sales and purchase orders. That alternative is checked by verifying intercompany customer and vendor setup and matching intercompany policies; the actual requirement instead calls for inspecting customer master, customer group, credit limits, and sales order eligibility.

B:

Use a supported CTP approach with capacity or production feasibility where configured. Reviewing capable-to-promise support, scheduling prerequisites, and applicable planning mode tests that mechanism, but it does not establish the reported condition—an enterprise must sell only to vetted customer accounts with approved credit and payment settings.

D:

Use a sales quotation and convert it to an order only after the customer accepts terms. Its technical evidence involves distinguishing a sales quotation from a confirmed sales order and reservation. For the stated question, inspecting customer master, customer group, credit limits, and sales order eligibility is the more relevant test.

Question 258

The current Dynamics 365 process fails to meet this requirement: An outbound operation must pick, pack, and stage customer orders in a defined sequence across teams. The investigation is complete. Which operational change provides the right fix?

  1. Assign appropriate location profiles and capacity rules to the different zones.
  2. Configure and apply inventory statuses with the intended blocking and release rules.
  3. Configure an outbound wave template for appropriate sales order workloads.
  4. Configure a work template representing the approved pick and put workflow.

Explanation

Correct Answer

D:

The supported next step is: Configure a work template representing the approved pick and put workflow. The observed requirement is An outbound operation must pick, pack, and stage customer orders in a defined sequence across teams. The diagnostic check was: Review work template steps, work classes, and processing priorities. This connects the recommended action to the actual system state, so the consultant changes the relevant supply-chain process rather than an unrelated setup area.

Incorrect Answers

A:

Assign appropriate location profiles and capacity rules to the different zones. That alternative is checked by comparing location profile capacity, location types, and product storage characteristics; the actual requirement instead calls for reviewing work template steps, work classes, and processing priorities.

B:

Configure and apply inventory statuses with the intended blocking and release rules. Inspecting inventory status setup and whether statuses allow reservation and work allocation tests that mechanism, but it does not establish the reported condition—an outbound operation must pick, pack, and stage customer orders in a defined sequence across teams.

C:

Configure an outbound wave template for appropriate sales order workloads. Its technical evidence involves inspecting wave template eligibility, shipment grouping, and release criteria. For the stated question, reviewing work template steps, work classes, and processing priorities is the more relevant test.

Question 259

A business process change is proposed because a trade agreement returns the wrong discount because both an all-customer and a specific price-group relation could match. Which assertion is most likely to undermine the intended control or transaction outcome?

  1. Leaving a discounted price with no effective-end date when the contract expires.
  2. Entering a universal base sales price and expecting group-specific pricing automatically.
  3. Activating the incomplete finished-goods cost without reconciling component detail.
  4. Assuming the last entered agreement always wins independent of match conditions.

Explanation

Correct Answer

D:

The unsafe assumption is: Assuming the last entered agreement always wins independent of match conditions. In the scenario, A trade agreement returns the wrong discount because both an all-customer and a specific price-group relation could match. The appropriate controlled response is Correct competing agreement conditions and test the relevant customer-group relation. Rejecting that shortcut preserves the business rule, data integrity, or audit trail the implementation is supposed to support.

Incorrect Answers

A:

Leaving a discounted price with no effective-end date when the contract expires. The check concerns leaving a discounted price with no effective-end date when the contract expires, not confirming that assuming the last entered agreement always wins independent of match conditions.

B:

Entering a universal base sales price and expecting group-specific pricing automatically. This assesses entering a universal base sales price and expecting group-specific pricing automatically; it does not determine the reported condition—a business process change is proposed because a trade agreement returns the wrong discount because both an all-customer and a specific price-group.

C:

Activating the incomplete finished-goods cost without reconciling component detail. The case-specific requirement is confirming that assuming the last entered agreement always wins independent of match conditions, which that option does not establish.

Question 260

The consultant reviews potential shortcuts after learning that a picking operation needs separate reserve storage and forward pick-face locations with controlled replenishment. Which belief must be challenged to avoid a misleading or uncontrolled result?

  1. Printing a generic product number where the operation requires unique container identification.
  2. Creating standalone manual work for every order while expecting wave grouping automatically.
  3. Classifying every rack as an interchangeable pick face and ignoring replenishment.
  4. Changing item default order quantity to fix warehouse staging instructions.

Explanation

Correct Answer

C:

The unsafe assumption is: Classifying every rack as an interchangeable pick face and ignoring replenishment. In the scenario, A picking operation needs separate reserve storage and forward pick-face locations with controlled replenishment. The appropriate controlled response is Configure appropriate reserve and pick locations with replenishment logic. Rejecting that shortcut preserves the business rule, data integrity, or audit trail the implementation is supposed to support.

Incorrect Answers

A:

Printing a generic product number where the operation requires unique container identification. The check concerns printing a generic product number where the operation requires unique container identification, not confirming that classifying every rack as an interchangeable pick face and ignoring replenishment.

B:

Creating standalone manual work for every order while expecting wave grouping automatically. This assesses creating standalone manual work for every order while expecting wave grouping automatically; it does not determine the reported condition—the consultant reviews potential shortcuts after learning that a picking operation needs separate reserve storage and forward pick-face locations with.

D:

Changing item default order quantity to fix warehouse staging instructions. The case-specific requirement is confirming that classifying every rack as an interchangeable pick face and ignoring replenishment, which that option does not establish.