mcAfee Secure Website
23

Microsoft MB-330 Bundle

Exam Code: MB-330

Exam Name Microsoft Dynamics 365 Supply Chain Management

Certification Provider: Microsoft

Corresponding Certification: Microsoft Certified: Dynamics 365 Supply Chain Management Functional Consultant Associate

MB-330 Training Materials $25.00

Reliable & Actual Study Materials for MB-330 Exam Success

The Latest MB-330 Exam Questions as Experienced in the Actual Test!

  • 24
    Questions & Answers

    MB-330 Questions & Answers

    464 Questions & Answers

    Includes questions types found on actual exam such as drag and drop, simulation, type in, and fill in the blank.

  • 25
    MB-330 Video Course

    MB-330 Training Course

    5 Video Lectures

    Based on Real Life Scenarios which you will encounter in exam and learn by working with real equipment.

exam =32

Microsoft Dynamics 365 Supply Chain Management (MB-330) Practice Tests

Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Microsoft Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Total Cost: $164.98
Bundle Price: $139.98

Purchase Individually

  • exam =34
    Questions & Answers

    Questions & Answers

    464 Questions

    $124.99
    exam =35
  • exam =37
    MB-330 Video Course

    Training Course

    5 Video Lectures

    $39.99

Microsoft MB-330 Practice Test 25

Question 240

The current Dynamics 365 process fails to meet this requirement: A carrier group has a default service that cannot handle oversized pallets ordered by a factory. The investigation is complete. Which operational change provides the right fix?

  1. Configure route/rate engines with suitable cost and service constraints.
  2. Generate freight bills from eligible rated loads and process the appropriate invoice workflow.
  3. Select a compatible carrier service and maintain corresponding transport rules.
  4. Configure automatic freight matching for eligible amounts with manual exception handling.

Explanation

Correct Answer

C:

The supported next step is: Select a compatible carrier service and maintain corresponding transport rules. The observed requirement is A carrier group has a default service that cannot handle oversized pallets ordered by a factory. The diagnostic check was: Compare carrier capabilities, item shipping dimensions, and route-guide restrictions. This connects the recommended action to the actual system state, so the consultant changes the relevant supply-chain process rather than an unrelated setup area.

Incorrect Answers

A:

Configure route/rate engines with suitable cost and service constraints. That alternative is checked by inspecting available routing and rating engines and their selection rules; the actual requirement instead calls for comparing carrier capabilities, item shipping dimensions, and routing-guide restrictions.

B:

Generate freight bills from eligible rated loads and process the appropriate invoice workflow. Reviewing freight bill generation conditions, shipment ratings, and invoicing setup tests that mechanism, but it does not establish the reported condition—a carrier group has a default service that cannot handle oversized pallets ordered by a factory.

D:

Configure automatic freight matching for eligible amounts with manual exception handling. Its technical evidence involves reviewing automatic reconciliation rules, charge tolerances, and exceptions requiring review. For the stated question, comparing carrier capabilities, item shipping dimensions, and routing-guide restrictions is the more relevant test.

Question 241

While diagnosing the following exception — An organization ships goods from its north distribution center to a south center and must track goods in transit — a stakeholder suggests skipping validation. Which assumption presents the key case-specific risk?

  1. Using a transfer journal for an assembly that transforms item identity.
  2. Recording a single unrestricted adjustment in both warehouses and losing in-transit traceability.
  3. Posting unverified inventory loss directly to the ledger without a count trail.
  4. Blocking the entire product globally when only one batch is under investigation.

Explanation

Correct Answer

B:

The unsafe assumption is: Recording a single unrestricted adjustment in both warehouses and losing in-transit traceability. In the scenario, An organization ships goods from its north distribution center to a south center and must track goods in transit. The appropriate controlled response is Create and process a transfer order with shipment and receipt as separate lifecycle events. Rejecting that shortcut preserves the business rule, data integrity, or audit trail the implementation is supposed to support.

Incorrect Answers

A:

Using a transfer journal for an assembly that transforms item identity. The check concerns using a transfer journal for an assembly that transforms item identity, not confirming that recording a single unrestricted adjustment in both warehouses and losing in-transit traceability.

C:

Posting unverified inventory loss directly to the ledger without a count trail. This assesses posting unverified inventory loss directly to the ledger without a count trail; it does not determine the reported condition—while diagnosing the following exception — An organization ships goods from its north distribution center to a south center and must track goods in.

D:

Blocking the entire product globally when only one batch is under investigation. The case-specific requirement is confirming that recording a single unrestricted adjustment in both warehouses and losing in-transit traceability, which that option does not establish.

Question 242

A project team is about to close this Dynamics 365 issue: A logistics team sees an ocean container delayed after a port inspection and needs exception visibility. Which assumption would be particularly unsafe for this resolution?

  1. Overwriting earlier cost estimates to erase the difference rather than recording adjustment.
  2. Creating a purchase order solely to attach freight to an internal transfer.
  3. Using only a PO requested delivery date to represent a multi-leg voyage.
  4. Assuming the originally planned arrival date remains authoritative despite updated transport evidence.

Explanation

Correct Answer

D:

The unsafe assumption is: Assuming the originally planned arrival date remains authoritative despite updated transport evidence. In the scenario, A logistics team sees an ocean container delayed after a port inspection and needs exception visibility. The appropriate controlled response is Maintain container journey tracking and update voyage milestones with validated status. Rejecting that shortcut preserves the business rule, data integrity, or audit trail the implementation is supposed to support.

Incorrect Answers

A:

Overwriting earlier cost estimates to erase the difference rather than recording adjustment. The check concerns overwriting earlier cost estimates to erase the difference rather than recording adjustment, not confirming that assuming the originally planned arrival date remains authoritative despite updated transport evidence.

B:

Creating a purchase order solely to attach freight to an internal transfer. This assesses creating a purchase order solely to attach freight to an internal transfer; it does not determine the reported condition—a logistics team sees an ocean container delayed after a port inspection and needs exception visibility.

C:

Using only a PO requested delivery date to represent a multi-leg voyage. The case-specific requirement is confirming that assuming the originally planned arrival date remains authoritative despite updated transport evidence, which that option does not establish.

Question 243

A business process change is proposed because a spare-parts distributor copied product setup across sites and forgot essential common defaults on newly created items. Which assertion is most likely to undermine the intended control or transaction outcome?

  1. Expecting a product template to replace all legal-entity-specific configuration checks.
  2. Overwriting local inventory defaults while making a shared catalog-description change.
  3. Assuming two similarly named items can safely share a component structure without review.
  4. Assuming an approved BOM version is automatically active for all dates and sites.

Explanation

Correct Answer

A:

The unsafe assumption is: Expecting a product template to replace all legal-entity-specific configuration checks. In the scenario, A spare-parts distributor copied product setup across sites and forgot essential common defaults on newly created items. The appropriate controlled response is Apply a governed product template at creation and verify company-specific settings separately. Rejecting that shortcut preserves the business rule, data integrity, or audit trail the implementation is supposed to support.

Incorrect Answers

B:

Overwriting local inventory defaults while making a shared catalog-description change. The check concerns overwriting local inventory defaults while making a shared catalog-description change, not confirming that expecting a product template to replace all legal-entity-specific configuration checks.

C:

Assuming two similarly named items can safely share a component structure without review. This assesses assuming two similarly named items can safely share a component structure without review; it does not determine the reported condition—a business process change is proposed because a spare-parts distributor copied product setup across sites and forgot essential common defaults on newly.

D:

Assuming an approved BOM version is automatically active for all dates and sites. The case-specific requirement is confirming that expecting a product template to replace all legal-entity-specific configuration checks, which that option does not establish.

Question 244

The business raises this issue: A warehouse-managed product must reserve inventory in a fixed order by site, warehouse, inventory status, and license plate. The investigation has established the following evidence: Check reservation hierarchy levels relative to location and license plate work flow. Which configuration or transaction step best addresses the requirement?

  1. Configure the appropriate ownership and consignment handling rather than a separate product code.
  2. Create the case-to-each conversion and apply it to the released product's unit setup.
  3. Configure a reservation hierarchy consistent with the warehouse management reservation model.
  4. Configure an appropriate storage dimension group with the required location hierarchy.

Explanation

Correct Answer

C:

The supported next step is: Configure a reservation hierarchy consistent with the warehouse management reservation model. The observed requirement is A warehouse-managed product must reserve inventory in a fixed order by site, warehouse, inventory status, and license plate. The diagnostic check was: Check reservation hierarchy levels relative to location and license plate work flow. This connects the recommended action to the actual system state, so the consultant changes the relevant supply-chain process rather than an unrelated setup area.

Incorrect Answers

A:

Configure the appropriate ownership and consignment handling rather than a separate product code. That alternative is checked by inspecting ownership-related inventory dimensions and consignment processes; the actual requirement instead calls for checking reservation hierarchy levels relative to location and license plate work flow.

B:

Create the case-to-each conversion and apply it to the released product's unit setup. Verifying a valid product unit conversion between case and piece and its item assignment tests that mechanism, but it does not establish the reported condition—a warehouse-managed product must reserve inventory in a fixed order by site, warehouse, inventory status, and license plate.

D:

Configure an appropriate storage dimension group with the required location hierarchy. Its technical evidence involves inspecting the storage dimension group and which dimensions are enabled for transactions. For the stated question, checking reservation hierarchy levels relative to location and license plate work flow is the more relevant test.

Question 245

A functional consultant has confirmed the following condition: A component kit is assembled from individual materials and inventory must record the kit's assembly consumption. The relevant check is: Verify the BOM structure and journal type appropriate to the inventory assembly event. What should the team implement or process?

  1. Use the supported BOM journal and component posting process for kit assembly.
  2. Configure a cycle counting approach that rotates inventory coverage based on risk and operational rules.
  3. Use an appropriate inventory movement or warehouse movement process with both locations recorded.
  4. Use the appropriate inventory valuation adjustment workflow with approval and traceability.

Explanation

Correct Answer

A:

The supported next step is: Use the supported BOM journal and component posting process for kit assembly. The observed requirement is A component kit is assembled from individual materials and inventory must record the kit's assembly consumption. The diagnostic check was: Verify the BOM structure and journal type appropriate to the inventory assembly event. This connects the recommended action to the actual system state, so the consultant changes the relevant supply-chain process rather than an unrelated setup area.

Incorrect Answers

B:

Configure a cycle counting approach that rotates inventory coverage based on risk and operational rules. That alternative is checked by comparing counting policies, location coverage, and existing count work or journals; the actual requirement instead calls for verifying the BOM structure and journal type appropriate to the inventory assembly event.

C:

Use an appropriate inventory movement or warehouse movement process with both locations recorded. Confirming that examine the required source and destination inventory dimensions for the bin relocation tests that mechanism, but it does not establish the reported condition—a component kit is assembled from individual materials and inventory must record the kit's assembly consumption.

D:

Use the appropriate inventory valuation adjustment workflow with approval and traceability. Its technical evidence involves distinguishing quantity-only differences from inventory valuation adjustments and accounting period limits. For the stated question, verifying the BOM structure and journal type appropriate to the inventory assembly event is the more relevant test.

Question 246

The current Dynamics 365 process fails to meet this requirement: Outbound shipments share a destination but logistics creates separate trucks despite sufficient combined capacity. The investigation is complete. Which operational change provides the right fix?

  1. Use load planning to combine eligible shipments within capacity and delivery requirements.
  2. Create cycle counting work for the selected locations and process the variance approval.
  3. Configure demand- or minimum-level replenishment for the forward pick faces.
  4. Configure the supported automatic containerization or packaging process.

Explanation

Correct Answer

A:

The supported next step is: Use load planning to combine eligible shipments within capacity and delivery requirements. The observed requirement is Outbound shipments share a destination but logistics creates separate trucks despite sufficient combined capacity. The diagnostic check was: Compare outbound load planning and load-build grouping constraints. This connects the recommended action to the actual system state, so the consultant changes the relevant supply-chain process rather than an unrelated setup area.

Incorrect Answers

B:

Create cycle counting work for the selected locations and process the variance approval. That alternative is checked by reviewing cycle-counting plans, location eligibility, and mobile worker tasks; the actual requirement instead calls for comparing outbound load planning and load-build grouping constraints.

C:

Configure demand- or minimum-level replenishment for the forward pick faces. Inspecting replenishment templates, demand triggers, and source/destination location rules tests that mechanism, but it does not establish the reported condition—outbound shipments share a destination but logistics creates separate trucks despite sufficient combined capacity.

D:

Configure the supported automatic containerization or packaging process. Its technical evidence involves checking containerization setup, container types, dimensions, and packing profiles. For the stated question, comparing outbound load planning and load-build grouping constraints is the more relevant test.

Question 247

The current Dynamics 365 process fails to meet this requirement: A pallet was partially picked from one license plate and the remaining stock must keep a valid tracked identity. The investigation is complete. Which operational change provides the right fix?

  1. Correct the worker's menu and eligible work settings while retaining release controls.
  2. Configure the supported automatic containerization or packaging process.
  3. Use load planning to combine eligible shipments within capacity and delivery requirements.
  4. Use the approved partial-pick process preserving license plate tracking and residual stock.

Explanation

Correct Answer

D:

The supported next step is: Use the approved partial-pick process preserving license plate tracking and residual stock. The observed requirement is A pallet was partially picked from one license plate and the remaining stock must keep a valid tracked identity. The diagnostic check was: Compare license plate, location, and quantity handling for partial picking work. This connects the recommended action to the actual system state, so the consultant changes the relevant supply-chain process rather than an unrelated setup area.

Incorrect Answers

A:

Correct the worker's menu and eligible work settings while retaining release controls. That alternative is checked by reviewing mobile menu filters, work status, worker permissions, and work-class eligibility; the actual requirement instead calls for comparing license plate, location, and quantity handling for partial picking work.

B:

Configure the supported automatic containerization or packaging process. Checking containerization setup, container types, dimensions, and packing profiles tests that mechanism, but it does not establish the reported condition—a pallet was partially picked from one license plate and the remaining stock must keep a valid tracked identity.

C:

Use load planning to combine eligible shipments within capacity and delivery requirements. Its technical evidence involves comparing outbound load planning and load-build grouping constraints. For the stated question, comparing license plate, location, and quantity handling for partial picking work is the more relevant test.

Question 248

A project team must resolve this supply-chain problem: A supplier rebate depends on total quarterly spend and must not be confused with an immediate purchase-line discount. After completing this check — Review rebate arrangement criteria, valid periods, and vendor association — which supported action is best suited to the case?

  1. Use consignment replenishment and authorized ownership-change transactions upon consumption.
  2. Configure purchasing workflow escalation based on the intended amount and policy.
  3. Configure an eligible vendor rebate arrangement and its settlement process.
  4. Maintain the purchase order delivery schedule for the staged arrivals.

Explanation

Correct Answer

C:

The supported next step is: Configure an eligible vendor rebate arrangement and its settlement process. The observed requirement is A supplier rebate depends on total quarterly spend and must not be confused with an immediate purchase-line discount. The diagnostic check was: Review rebate arrangement criteria, valid periods, and vendor association. This connects the recommended action to the actual system state, so the consultant changes the relevant supply-chain process rather than an unrelated setup area.

Incorrect Answers

A:

Use consignment replenishment and authorized ownership-change transactions upon consumption. That alternative is checked by verifying consignment ownership and replenishment order requirements before receipt; the actual requirement instead calls for reviewing rebate arrangement criteria, valid periods, and vendor association.

B:

Configure purchasing workflow escalation based on the intended amount and policy. Reviewing conditional workflow rules, approval roles, and currency threshold interpretation tests that mechanism, but it does not establish the reported condition—a supplier rebate depends on total quarterly spend and must not be confused with an immediate purchase-line discount.

D:

Maintain the purchase order delivery schedule for the staged arrivals. Its technical evidence involves inspecting delivery schedule lines, quantities, and corresponding receipt commitments. For the stated question, reviewing rebate arrangement criteria, valid periods, and vendor association is the more relevant test.

Question 249

A business process change is proposed because a plant normally purchases chemicals in pallets but production may request small cases on an exception. Which assertion is most likely to undermine the intended control or transaction outcome?

  1. Equating a valid item identifier with a valid packaging-unit conversion.
  2. Treating default order settings as an absolute ban on every exception.
  3. Overwriting year-round defaults because a single promotional campaign is temporary.
  4. Assuming one global default necessarily fits different regional fulfillment constraints.

Explanation

Correct Answer

B:

The unsafe assumption is: Treating default order settings as an absolute ban on every exception. In the scenario, A plant normally purchases chemicals in pallets but production may request small cases on an exception. The appropriate controlled response is Set sensible default order settings while allowing controlled transaction exceptions. Rejecting that shortcut preserves the business rule, data integrity, or audit trail the implementation is supposed to support.

Incorrect Answers

A:

Equating a valid item identifier with a valid packaging-unit conversion. The check concerns equating a valid item identifier with a valid packaging-unit conversion, not confirming that treating default order settings as an absolute ban on every exception.

C:

Overwriting year-round defaults because a single promotional campaign is temporary. This assesses overwriting year-round defaults because a single promotional campaign is temporary; it does not determine the reported condition—a business process change is proposed because a plant normally purchases chemicals in pallets but production may request small cases on an exception.

D:

Assuming one global default necessarily fits different regional fulfillment constraints. The case-specific requirement is confirming that treating default order settings as an absolute ban on every exception, which that option does not establish.

Question 250

The business raises this issue: A distributor replenishes fast-moving goods daily but uses the same procurement policy as slow-moving capital spares. The investigation has established the following evidence: Review coverage groups, procurement lead times, and item-specific demand characteristics. Which configuration or transaction step best addresses the requirement?

  1. Configure suitable demand forecast consumption settings and verify firm-order treatment.
  2. Assign suitable coverage groups and item coverage overrides to each inventory class.
  3. Configure the applicable planning safety margins to protect intended lead-time buffers.
  4. Configure min/max item coverage with authorized replenishment thresholds.

Explanation

Correct Answer

B:

The supported next step is: Assign suitable coverage groups and item coverage overrides to each inventory class. The observed requirement is A distributor replenishes fast-moving goods daily but uses the same procurement policy as slow-moving capital spares. The diagnostic check was: Review coverage groups, procurement lead times, and item-specific demand characteristics. This connects the recommended action to the actual system state, so the consultant changes the relevant supply-chain process rather than an unrelated setup area.

Incorrect Answers

A:

Configure suitable demand forecast consumption settings and verify firm-order treatment. That alternative is checked by inspecting forecast consumption and master planning parameters for the relevant plan; the actual requirement instead calls for reviewing coverage groups, procurement lead times, and item-specific demand characteristics.

C:

Configure the applicable planning safety margins to protect intended lead-time buffers. Inspecting receipt margin, issue margin, and reordering margin versus stated process timing tests that mechanism, but it does not establish the reported condition—a distributor replenishes fast-moving goods daily but uses the same procurement policy as slow-moving capital spares.

D:

Configure min/max item coverage with authorized replenishment thresholds. Its technical evidence involves inspecting item coverage code, minimum, maximum, and effective planning dimensions. For the stated question, reviewing coverage groups, procurement lead times, and item-specific demand characteristics is the more relevant test.