mcAfee Secure Website
exam =5
exam =6

Exam Code: JN0-650

Exam Name: Enterprise Routing and Switching, Professional (JNCIP-ENT)

Certification Provider: Juniper

Corresponding Certification: JNCIP-ENT

Juniper JN0-650 Questions & Answers

Reliable & Actual Study Materials for JN0-650 Exam Success

107 Questions & Answers with Testing Engine

"JN0-650: Enterprise Routing and Switching, Professional (JNCIP-ENT)" Testing Engine covers all the knowledge points of the real Juniper JN0-650 exam.

The latest actual JN0-650 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at JN0-650 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Juniper Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Juniper JN0-650 Practice Test 80

Question 790

At a campus network built with Juniper EX switches, a Junos specialist investigates this scenario: A malfunctioning device saturates one VLAN with broadcasts and causes widespread host loss. The intended segmentation and loop prevention must remain intact. Which design objective is best served by this mechanism?

  1. Use family ethernet-switching on supported switch logical interfaces.
  2. Use storm control to constrain unexpected Layer 2 flooding from an edge device.
  3. Use L2PT to preserve customer Layer 2 control protocols across a service-provider tunnel.
  4. Use tagged trunks to carry multiple VLANs between compatible switches.

Explanation

Correct Answer

B:

For a campus network built with Juniper EX switches, this mechanism fits the requirement: Use storm control to constrain unexpected Layer 2 flooding from an edge device. The design is appropriate because: Layer 2 storm control limits specified excessive broadcast or multicast traffic on a port. In this scenario, the observed issue is: A malfunctioning device saturates one VLAN with broadcasts and causes widespread host loss. The corresponding implementation is: Apply suitable storm-control thresholds to the affected edge ports.

Incorrect Answers

A:

Junos enhanced Layer 2 switching uses family ethernet-switching configuration on eligible logical interfaces. The appropriate correction for the reported case is: Apply suitable storm-control thresholds to the affected edge ports.

C:

Layer 2 protocol tunneling can transport specified customer control frames across a separate provider bridging domain. Fixing that different mechanism would not address the current root cause: layer 2 storm control limits specified excessive broadcast or multicast traffic on a port.

D:

An Ethernet trunk carries selected tagged VLANs and membership must include every allowed VLAN. Its verification is distinct from the reported condition: A malfunctioning device saturates one VLAN with broadcasts and causes widespread host loss. The intended segmentation and loop prevention must remain intact.

Question 791

At a live-event venue using routed multicast streaming, a Junos specialist investigates this scenario: A large multicast domain requires dynamic discovery of candidate RPs instead of maintaining every mapping manually. The change must preserve source identity and avoid multicast loops. What verification result should the engineer expect?

  1. The expected multicast forwarding entry contains its correct upstream and downstream interfaces.
  2. After one RP fails, new group joins reach the surviving RP and active sources remain discoverable.
  3. Routers learn the expected RP mapping and group traffic builds a valid shared tree.
  4. The multicast forwarding state uses the intended RPF interface and packet discard counters stop increasing.

Explanation

Correct Answer

C:

For a live-event venue using routed multicast streaming, the decisive evidence is: Routers learn the expected RP mapping and group traffic builds a valid shared tree. This validates the action: Configure a compatible bootstrap router and candidate RP strategy within the intended administrative scope. Because: PIM bootstrap router mechanisms can advertise eligible RP information to routers in the multicast domain. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

A:

Multicast forwarding depends on per-group and per-source route state in addition to host membership. The appropriate correction for the reported case is: Configure a compatible bootstrap router and candidate RP strategy within the intended administrative scope.

B:

Anycast RP permits multiple rendezvous points to share one RP address with routing choosing a reachable instance. Fixing that different mechanism would not address the current root cause: PIM bootstrap router mechanisms can advertise eligible RP information to routers in the multicast domain.

D:

Multicast reverse-path forwarding verifies that a packet arrives via a valid route back toward its source or RP. Its verification is distinct from the reported condition: A large multicast domain requires dynamic discovery of candidate RPs instead of maintaining every mapping manually. The change must preserve source identity and avoid multicast loops.

Question 792

At a Junos EVPN-VXLAN leaf-spine fabric, a Junos specialist investigates this scenario: A tenant's EVPN route appears in another tenant's MAC table despite separate VLAN names. The tenant traffic must remain isolated across the overlay. Which configuration adjustment should be made first to address this issue?

  1. Verify compatible Ethernet segment identifiers and advertisement of type-4 segment routes.
  2. Verify the local MAC/IP advertisement and its acceptance through the correct EVPN instance.
  3. Configure supported all-active Ethernet segment multihoming and consistent ESI state.
  4. Set approved export and import route targets for each isolated tenant EVPN service.

Explanation

Correct Answer

D:

For a Junos EVPN-VXLAN leaf-spine fabric, the direct corrective action is: Set approved export and import route targets for each isolated tenant EVPN service. This addresses the mechanism: EVPN route targets determine which routes are imported into the relevant EVPN instances and tenant contexts. Confirm by checking: Only matching tenant MAC and prefix advertisements enter each isolated EVPN instance. During rollout, audit route-target overlap because wrong imports can defeat VLAN and VNI isolation.

Incorrect Answers

A:

EVPN Ethernet Segment route type 4 supports discovery of PEs connected to the same Ethernet segment. The appropriate correction for the reported case is: Set approved export and import route targets for each isolated tenant EVPN service.

B:

EVPN route type 2 advertises MAC reachability and can include associated IP information for hosts. Fixing that different mechanism would not address the current root cause: EVPN route targets determine which routes are imported into the relevant EVPN instances and tenant contexts.

C:

EVPN all-active multihoming permits multiple PEs to forward eligible known-unicast traffic with appropriate control-plane loop prevention. Its verification is distinct from the reported condition: A tenant's EVPN route appears in another tenant's MAC table despite separate VLAN names. The tenant traffic must remain isolated across the overlay.

Question 793

At an enterprise core exchanging BGP routes over redundant WAN paths, a Junos specialist investigates this scenario: A BGP neighbor is configured correctly but remains in Connect or Active state across a protected interconnect. The chosen route must have a valid data-plane next hop. Which design objective is best served by this mechanism?

  1. Use TCP reachability diagnostics before changing BGP path attributes.
  2. Use next-hop self when internal clients cannot route to external BGP next-hop addresses.
  3. Use BGP route reflectors to scale internal route distribution beyond a full mesh.
  4. Use BGP graceful restart for controlled routing-process interruptions with compatible peers.

Explanation

Correct Answer

A:

For an enterprise core exchanging BGP routes over redundant WAN paths, this mechanism fits the requirement: Use TCP reachability diagnostics before changing BGP path attributes. The design is appropriate because: BGP depends on a reachable TCP transport path, normally using destination port 179. In this scenario, the observed issue is: A BGP neighbor is configured correctly but remains in Connect or Active state across a protected interconnect. The corresponding implementation is: Check source reachability and permit the specifically authorized BGP TCP flow across the interconnect.

Incorrect Answers

B:

IBGP propagation may retain the original eBGP next-hop attribute unless policy or configuration changes it. The appropriate correction for the reported case is: Check source reachability and permit the specifically authorized BGP TCP flow across the interconnect.

C:

Ordinary iBGP split-horizon rules avoid re-advertising routes between iBGP peers; route reflectors provide controlled reflection. Fixing that different mechanism would not address the current root cause: BGP depends on a reachable TCP transport path, normally using destination port 179.

D:

BGP graceful restart can preserve selected forwarding state during brief compatible control-plane interruptions. Its verification is distinct from the reported condition: A BGP neighbor is configured correctly but remains in Connect or Active state across a protected interconnect. The chosen route must have a valid data-plane next hop.

Question 794

At a school building a restricted guest onboarding network, a Junos specialist investigates this scenario: A packet capture shows client EAPOL frames but no RADIUS transaction and engineers believe the laptop should contact RADIUS directly. Only approved identities may enter privileged enterprise segments. What is the most likely design-related cause?

  1. A guest VLAN can supply restricted access for supported nonresponsive clients when the authentication mode allows it.
  2. In common 802.1X switching, the supplicant exchanges EAPOL with the authenticator, which relays authentication toward a RADIUS server.
  3. MAC RADIUS can authenticate eligible non-802.1X endpoints using MAC-based identity against approved RADIUS policy.
  4. Multiple authentication methods can have defined precedence and permitted fallback behavior depending on endpoint response.

Explanation

Correct Answer

B:

For a school building a restricted guest onboarding network, the governing mechanism is: In common 802.1X switching, the supplicant exchanges EAPOL with the authenticator, which relays authentication toward a RADIUS server. It explains the reported symptom: A packet capture shows client EAPOL frames but no RADIUS transaction and engineers believe the laptop should contact RADIUS directly. The intended response is: Verify switch-side RADIUS connectivity and authenticator configuration rather than redirecting the client to the server. Verification: An EAPOL attempt leads to the intended RADIUS Access-Request and a resulting authorization decision.

Incorrect Answers

A:

A guest VLAN can supply restricted access for supported nonresponsive clients when the authentication mode allows it. This alternative mechanism does not match the current fault.

C:

MAC RADIUS can authenticate eligible non-802.1X endpoints using MAC-based identity against approved RADIUS policy. Fixing that different mechanism would not address the current root cause: in common 802.1X switching, the supplicant exchanges EAPOL with the authenticator, which relays authentication toward a RADIUS server.

D:

Multiple authentication methods can have defined precedence and permitted fallback behavior depending on endpoint response. Its verification is distinct from the reported condition: A packet capture shows client EAPOL frames but no RADIUS transaction and engineers believe the laptop should contact RADIUS directly. Only approved identities may enter privileged enterprise segments.

Question 795

At a branch introducing an IP telephony access layer, a Junos specialist investigates this scenario: A phone boots on one switch but repeatedly power-cycles when many phones connect to another switch. The solution should not give workstation traffic untrusted voice privileges. What requirement most specifically calls for this approach?

  1. Use PoE classification to allocate suitable endpoint power safely.
  2. Use LLDP to discover directly connected Ethernet neighbors.
  3. Use PoE capacity planning when many phones draw power from one access switch.
  4. Use LLDP power negotiation for compatible phones with varying power requirements.

Explanation

Correct Answer

C:

For a branch introducing an IP telephony access layer, this mechanism fits the requirement: Use PoE capacity planning when many phones draw power from one access switch. The design is appropriate because: PoE availability depends on available switch power budget and each attached device's negotiated consumption. In this scenario, the observed issue is: A phone boots on one switch but repeatedly power-cycles when many phones connect to another switch. The corresponding implementation is: Verify total PoE capacity and allocate sufficient per-port power for the installed phones.

Incorrect Answers

A:

PoE power classification informs the power source of the powered device's required allocation. The appropriate correction for the reported case is: Verify total PoE capacity and allocate sufficient per-port power for the installed phones.

B:

Link Layer Discovery Protocol advertises local chassis and port information to directly attached compatible devices. Fixing that different mechanism would not address the current root cause: poE availability depends on available switch power budget and each attached device's negotiated consumption.

D:

Supported LLDP-MED or LLDP power TLVs can negotiate endpoint power requirements beyond static class assumptions. Its verification is distinct from the reported condition: A phone boots on one switch but repeatedly power-cycles when many phones connect to another switch. The solution should not give workstation traffic untrusted voice privileges.

Question 796

At an enterprise migrating virtual machines between racks, a Junos specialist investigates this scenario: Traffic received from one EVPN multihomed Ethernet segment is re-forwarded through another PE back into that same segment. The overlay must relearn host reachability without stale tunnel selection. What risk must the implementation avoid?

  1. Coordinate access-side LAG and platform semantics before mixing single-active and all-active policies.
  2. Constrain flooding domain and avoid replicating unknown unicast to unauthorized VTEPs.
  3. Check all-active versus single-active semantics before changing failover advertisements.
  4. Do not bypass EVPN loop prevention simply to make one troubleshooting frame visible.

Explanation

Correct Answer

D:

For an enterprise migrating virtual machines between racks, the relevant safeguard is: Do not bypass EVPN loop prevention simply to make one troubleshooting frame visible. It matters while implementing: Verify supported split-horizon or ESI label handling for the affected multihomed path. The fault involves: EVPN multihoming split-horizon mechanisms prevent reflected traffic from looping across a common Ethernet segment. The required acceptance result remains: A loop test shows that frames from the segment are not reflected back through a peer attachment.

Incorrect Answers

A:

EVPN single-active multihoming restricts the forwarding role on an Ethernet segment to a selected active PE. The appropriate correction for the reported case is: Do not bypass EVPN loop prevention simply to make one troubleshooting frame visible.

B:

EVPN route type 3 carries inclusive multicast Ethernet tag information used to establish BUM replication membership. Fixing that different mechanism would not address the current root cause: EVPN multihoming split-horizon mechanisms prevent reflected traffic from looping across a common Ethernet segment.

C:

EVPN Ethernet Auto-Discovery route type 1 participates in multihoming reachability and mass-withdraw behavior. Its verification is distinct from the reported condition: Traffic received from one EVPN multihomed Ethernet segment is re-forwarded through another PE back into that same segment. The overlay must relearn host reachability without stale tunnel selection.

Question 797

At a new office connecting VoIP phones to EX access switches, a Junos specialist investigates this scenario: A phone's integrated PC switch port works but the downstream computer never reaches the data VLAN. The rollout must support phones and connected workstations securely. What is the most appropriate correction to implement?

  1. Validate the phone passthrough configuration and Junos port VLAN membership for both traffic types.
  2. Enable supported LLDP on authorized interfaces and inspect neighbor information.
  3. Classify the authorized voice traffic and apply suitable per-port QoS mapping separately from PC traffic.
  4. Verify total PoE capacity and allocate sufficient per-port power for the installed phones.

Explanation

Correct Answer

A:

For a new office connecting VoIP phones to EX access switches, the direct corrective action is: Validate the phone passthrough configuration and Junos port VLAN membership for both traffic types. This addresses the mechanism: An Ethernet phone can bridge tagged voice traffic and untagged workstation traffic with appropriate VLAN behavior. Confirm by checking: The phone registers in the voice VLAN and the connected PC receives data-VLAN connectivity. During rollout, verify 802.1X and MAC RADIUS behavior separately for phone and PC identities.

Incorrect Answers

B:

Link Layer Discovery Protocol advertises local chassis and port information to directly attached compatible devices. The appropriate correction for the reported case is: Validate the phone passthrough configuration and Junos port VLAN membership for both traffic types.

C:

Voice VLAN tagging and QoS classification must be mapped to the correct switch forwarding treatment. Fixing that different mechanism would not address the current root cause: An Ethernet phone can bridge tagged voice traffic and untagged workstation traffic with appropriate VLAN behavior.

D:

PoE availability depends on available switch power budget and each attached device's negotiated consumption. Its verification is distinct from the reported condition: A phone's integrated PC switch port works but the downstream computer never reaches the data VLAN. The rollout must support phones and connected workstations securely.

Question 798

At an enterprise core exchanging BGP routes over redundant WAN paths, a Junos specialist investigates this scenario: A BGP neighbor uses an AS number above the two-byte range but older configuration assumes a 16-bit value. The chosen route must have a valid data-plane next hop. What risk must the implementation avoid?

  1. Check local preference and next-hop reachability first because they can override this comparison.
  2. Check interoperability and avoid substituting truncated ASN values for real peer identity.
  3. Confirm negotiated refresh capability and test policy syntax before reprocessing large tables.
  4. Do not confuse BGP local preference with Junos protocol-level route preference.

Explanation

Correct Answer

B:

For an enterprise core exchanging BGP routes over redundant WAN paths, the relevant safeguard is: Check interoperability and avoid substituting truncated ASN values for real peer identity. It matters while implementing: Configure the correct complete AS value on both peers using supported BGP capability negotiation. The fault involves: BGP supports 4-octet autonomous system numbering through compatible capabilities and AS processing. The required acceptance result remains: The BGP OPEN handshake succeeds with the full expected ASN.

Incorrect Answers

A:

In Junos BGP best-path selection an eligible shorter AS path is generally preferred after higher-priority criteria tie. The appropriate correction for the reported case is: Check interoperability and avoid substituting truncated ASN values for real peer identity.

C:

BGP route refresh permits eligible peers to request readvertisement after policy changes when both support it. Fixing that different mechanism would not address the current root cause: BGP supports 4-octet autonomous system numbering through compatible capabilities and AS processing.

D:

BGP LOCAL_PREF determines preferred exit within an AS; higher values generally win over lower ones. Its verification is distinct from the reported condition: A BGP neighbor uses an AS number above the two-byte range but older configuration assumes a 16-bit value. The chosen route must have a valid data-plane next hop.

Question 799

At a dual-homed business network peering with two upstream providers, a Junos specialist investigates this scenario: An enterprise iBGP network cannot scale because every routing speaker requires a direct adjacency with every other speaker. The routing policy must retain intended primary and backup paths. What risk must the implementation avoid?

  1. Do not claim origin always wins over local preference or AS-path length.
  2. Verify provider documentation and do not broaden peer trust to arbitrary autonomous systems.
  3. Preserve reflector redundancy and cluster design to avoid hidden routing loops.
  4. Do not reuse cluster identifiers carelessly across unrelated reflection domains.

Explanation

Correct Answer

C:

For a dual-homed business network peering with two upstream providers, the relevant safeguard is: Preserve reflector redundancy and cluster design to avoid hidden routing loops. It matters while implementing: Deploy supported route-reflector clusters and designate approved clients with appropriate topology. The fault involves: Ordinary iBGP split-horizon rules avoid re-advertising routes between iBGP peers; route reflectors provide controlled reflection. The required acceptance result remains: Reflector clients receive BGP routes from other clients through the reflector.

Incorrect Answers

A:

BGP best-path selection considers origin type after higher-priority attributes, normally preferring IGP over EGP over incomplete. The appropriate correction for the reported case is: Preserve reflector redundancy and cluster design to avoid hidden routing loops.

B:

BGP OPEN messages carry AS information and external peers must agree on their intended local and remote AS relationship. Fixing that different mechanism would not address the current root cause: ordinary iBGP split-horizon rules avoid re-advertising routes between iBGP peers; route reflectors provide controlled reflection.

D:

Route reflector cluster identifiers participate in loop detection on reflected BGP paths. Its verification is distinct from the reported condition: An enterprise iBGP network cannot scale because every routing speaker requires a direct adjacency with every other speaker. The routing policy must retain intended primary and backup paths.

Question 800

At a large enterprise updating redundant switch links, a Junos specialist investigates this scenario: A switch interconnect passes one VLAN but drops frames for a second authorized VLAN. The change must retain both link resilience and correct VLAN isolation. Which technical mechanism most directly explains the symptom?

  1. IEEE 802.1ad Q-in-Q encapsulates customer-tagged frames with an outer service VLAN tag.
  2. An untagged Ethernet access port places endpoint traffic into its configured access VLAN.
  3. MSTP region membership depends on compatible region name, revision and VLAN-to-instance mapping digest.
  4. An Ethernet trunk carries selected tagged VLANs and membership must include every allowed VLAN.

Explanation

Correct Answer

D:

For a large enterprise updating redundant switch links, the governing mechanism is: An Ethernet trunk carries selected tagged VLANs and membership must include every allowed VLAN. It explains the reported symptom: A switch interconnect passes one VLAN but drops frames for a second authorized VLAN. The intended response is: Configure the required VLAN members on both ends of the tagged trunk. Verification: Both VLANs pass tagged frames and switch VLAN membership reports the intended trunk.

Incorrect Answers

A:

IEEE 802.1ad Q-in-Q encapsulates customer-tagged frames with an outer service VLAN tag. This alternative mechanism does not match the current fault.

B:

An untagged Ethernet access port places endpoint traffic into its configured access VLAN. Fixing that different mechanism would not address the current root cause: An Ethernet trunk carries selected tagged VLANs and membership must include every allowed VLAN.

C:

MSTP region membership depends on compatible region name, revision and VLAN-to-instance mapping digest. Its verification is distinct from the reported condition: A switch interconnect passes one VLAN but drops frames for a second authorized VLAN. The change must retain both link resilience and correct VLAN isolation.

Enterprise Routing and Switching, Professional (JNCIP-ENT) (JN0-650) Practice Tests