mcAfee Secure Website
exam =5
exam =6

Exam Code: JN0-481

Exam Name: Data Center, Specialist (JNCIS-DC)

Certification Provider: Juniper

Juniper JN0-481 Questions & Answers

Reliable & Actual Study Materials for JN0-481 Exam Success

65 Questions & Answers with Testing Engine

"JN0-481: Data Center, Specialist (JNCIS-DC)" Testing Engine covers all the knowledge points of the real Juniper JN0-481 exam.

The latest actual JN0-481 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at JN0-481 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Juniper Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Juniper JN0-481 Practice Test 9

Question 80

A multiregion deployment needs to preserve tenant boundaries while propagating specific data center routes across a DCI. Which initial check would most directly distinguish the likely cause?

  1. Inspect the proposed external or shared-services routing path, import policy and required security controls.
  2. Compare the host attachment, hypervisor port-group mapping and Apstra VN or connectivity-template assignment.
  3. Inspect DCI route targets, participating VN or VRF memberships and cross-site advertisements.
  4. Inspect the route export/import policy and observed advertised routes for the affected VRF.

Explanation

Correct Answer

C:

This checks the relevant evidence first: inspect DCI route targets, participating VN or VRF memberships and cross-site advertisements. The underlying concept is that DCI design must coordinate intended virtual-network IDs, routing zones and controlled route distribution between sites. After confirming the finding, a controlled remediation is to apply documented DCI policies for only authorized tenant prefixes and virtual-network reachability.

Incorrect Answers

A:

The option “Inspect the proposed external or shared-services routing path, import policy and required security controls” is useful in a different setting: Two tenants require a controlled shared service, and a proposal suggests importing every route into each tenant VRF. The case being tested is: A multiregion deployment needs to preserve tenant boundaries while propagating specific data center routes across a DCI. The relevant inspection is: Inspect DCI route targets, participating VN or VRF memberships and cross-site advertisements. The most discriminating first check is “Inspect DCI route targets, participating VN or VRF memberships and cross-site advertisements”.

B:

“Compare the host attachment, hypervisor port-group mapping and Apstra VN or connectivity-template assignment” is relevant to a different condition: A VMware workload migration succeeds at compute level but its new host port cannot reach the expected tenant virtual network. The stated question instead concerns: A multiregion deployment needs to preserve tenant boundaries while propagating specific data center routes across a DCI. The relevant inspection is: Inspect DCI route targets, participating VN or VRF memberships and cross-site advertisements. The most discriminating first check is “Inspect DCI route targets, participating VN or VRF memberships and cross-site advertisements”.

D:

“Inspect the route export/import policy and observed advertised routes for the affected VRF” is associated with a distinct issue: A route export template applied to a border device advertises all tenant prefixes beyond the data center. By contrast, the actual problem is: A multiregion deployment needs to preserve tenant boundaries while propagating specific data center routes across a DCI. The relevant inspection is: Inspect DCI route targets, participating VN or VRF memberships and cross-site advertisements. The most discriminating first check is “Inspect DCI route targets, participating VN or VRF memberships and cross-site advertisements”.

Question 81

A managed fabric reports an EVPN service mismatch while device agents remain connected and collecting data. Which controlled change best addresses the described requirement?

  1. Investigate the measured condition and adjust the approved monitored system or justified probe threshold.
  2. Route the issue to the correct service, telemetry or device workflow based on the observed anomaly evidence.
  3. Correct the mismatched service intent or deployed configuration while preserving authorized tenant isolation.
  4. Investigate unexpected changes using the appropriate generated-config view and approved override workflow.

Explanation

Correct Answer

B:

This action addresses the stated defect: route the issue to the correct service, telemetry or device workflow based on the observed anomaly evidence. The underlying constraint is that Apstra anomaly categories distinguish service intent violations, device issues and analytics-detected deviations. Verify rather than assume success: confirm the corrective workflow resolves the specific anomaly class without hiding unrelated alarms.

Incorrect Answers

A:

“Investigate the measured condition and adjust the approved monitored system or justified probe threshold” is associated with a distinct issue: A custom telemetry probe flags a latency anomaly but the blueprint shows no service configuration errors. By contrast, the actual problem is: A managed fabric reports an EVPN service mismatch while device agents remain connected and collecting data. Route the issue to the correct service, telemetry or device workflow based on the observed anomaly evidence. The most relevant correction is “Route the issue to the correct service, telemetry or device workflow based on the observed anomaly evidence”.

C:

“Correct the mismatched service intent or deployed configuration while preserving authorized tenant isolation” is relevant to a different condition: An operator sees a tenant-service warning while physical switch availability indicators remain green. The stated question instead concerns: A managed fabric reports an EVPN service mismatch while device agents remain connected and collecting data. Route the issue to the correct service, telemetry or device workflow based on the observed anomaly evidence. The most relevant correction is “Route the issue to the correct service, telemetry or device workflow based on the observed anomaly evidence”.

D:

That choice—“Investigate unexpected changes using the appropriate generated-config view and approved override workflow”—addresses this other problem: A network engineer sees differences among the pristine, incremental and rendered configurations for a managed leaf. Here the scenario is: A managed fabric reports an EVPN service mismatch while device agents remain connected and collecting data. Route the issue to the correct service, telemetry or device workflow based on the observed anomaly evidence. The most relevant correction is “Route the issue to the correct service, telemetry or device workflow based on the observed anomaly evidence”.

Question 82

An EVPN network learns a host MAC address and associated IP binding from a remote VTEP. Which evidence most directly verifies the intended network outcome?

  1. Confirm the remote VTEP has a correctly imported Type 2 endpoint route and can deliver host traffic.
  2. Observe valid imported EVPN routes and bidirectional host reachability only within the authorized virtual network.
  3. Confirm the destination subnet appears as an imported Type 5 route and routes end-to-end in the intended VRF.
  4. Confirm stable multihoming advertisements and appropriate forwarding when each server attachment is tested.

Explanation

Correct Answer

A:

This directly tests the desired result: confirm the remote VTEP has a correctly imported Type 2 endpoint route and can deliver host traffic. The decisive investigation is to inspect the EVPN route database for Type 2 MAC or MAC-IP advertisements and associated VNI or next hop. The governing principle is that EVPN Type 2 routes distribute MAC and potentially IP reachability for endpoint learning.

Incorrect Answers

B:

“Observe valid imported EVPN routes and bidirectional host reachability only within the authorized virtual network” is associated with a distinct issue: A server VLAN is created on two racks but remote EVPN routes cannot be imported because their route targets do not align. By contrast, the actual problem is: An EVPN network learns a host MAC address and associated IP binding from a remote VTEP. EVPN Type 2 routes distribute MAC and potentially IP reachability for endpoint learning. The direct acceptance evidence is “Confirm the remote VTEP has a correctly imported Type 2 endpoint route and can deliver host traffic”.

C:

The option “Confirm the destination subnet appears as an imported Type 5 route and routes end-to-end in the intended VRF” is useful in a different setting: A fabric exchanges IP prefixes between tenant routing zones without requiring every remote subnet to be represented as an individual MAC. The case being tested is: An EVPN network learns a host MAC address and associated IP binding from a remote VTEP. EVPN Type 2 routes distribute MAC and potentially IP reachability for endpoint learning. The direct acceptance evidence is “Confirm the remote VTEP has a correctly imported Type 2 endpoint route and can deliver host traffic”.

D:

“Confirm stable multihoming advertisements and appropriate forwarding when each server attachment is tested” is relevant to a different condition: An EVPN multihomed endpoint exhibits unstable forwarding after both attachment leafs advertise the same segment independently. The stated question instead concerns: An EVPN network learns a host MAC address and associated IP binding from a remote VTEP. EVPN Type 2 routes distribute MAC and potentially IP reachability for endpoint learning. The direct acceptance evidence is “Confirm the remote VTEP has a correctly imported Type 2 endpoint route and can deliver host traffic”.

Question 83

An Apstra designer tries to deploy a rack without allocating required underlay interface and IP pools. Which controlled change best addresses the described requirement?

  1. Resolve the specific design and resource conflicts and regenerate intended configuration.
  2. Choose an officially supported template and platform combination and regenerate the blueprint configuration.
  3. Stage and review each intended blueprint update through an approved migration or change process.
  4. Extend the approved blueprint design to include appropriate border connectivity and associated resources.

Explanation

Correct Answer

A:

This action addresses the stated defect: resolve the specific design and resource conflicts and regenerate intended configuration. The underlying constraint is that design-phase resource and topology validation must succeed before a controlled deployment can be trusted. Verify rather than assume success: confirm the blueprint build validation clears and expected rendered configurations are available for review.

Incorrect Answers

B:

That choice—“Choose an officially supported template and platform combination and regenerate the blueprint configuration”—addresses this other problem: A team assigns a device image and platform combination not supported by the chosen Apstra reference design. Here the scenario is: An Apstra designer tries to deploy a rack without allocating required underlay interface and IP pools. Resolve the specific design and resource conflicts and regenerate intended configuration. The most relevant correction is “Resolve the specific design and resource conflicts and regenerate intended configuration”.

C:

“Stage and review each intended blueprint update through an approved migration or change process” is associated with a distinct issue: A design template was edited after the first rack was built and an engineer assumes existing active blueprints are retroactively rewritten. By contrast, the actual problem is: An Apstra designer tries to deploy a rack without allocating required underlay interface and IP pools. Resolve the specific design and resource conflicts and regenerate intended configuration. The most relevant correction is “Resolve the specific design and resource conflicts and regenerate intended configuration”.

D:

The option “Extend the approved blueprint design to include appropriate border connectivity and associated resources” is useful in a different setting: An engineer finishes a fabric template without any modeled north-south peering attachment points. The case being tested is: An Apstra designer tries to deploy a rack without allocating required underlay interface and IP pools. Resolve the specific design and resource conflicts and regenerate intended configuration. The most relevant correction is “Resolve the specific design and resource conflicts and regenerate intended configuration”.

Question 84

A planned Apstra fabric includes future rack growth but the initial design leaves no capacity for additional spine downlinks. Which initial check would most directly distinguish the likely cause?

  1. Compare the proposed topology with supported reference-design dimensions and template requirements.
  2. Review intended external service connectivity and supported blueprint reference-design capabilities.
  3. Calculate required leaf uplinks and available spine ports for projected growth under the topology template.
  4. Compare required external routing connections with the template topology and leaf roles.

Explanation

Correct Answer

C:

This checks the relevant evidence first: calculate required leaf uplinks and available spine ports for projected growth under the topology template. The underlying concept is that capacity planning for reference designs must include projected rack count, spine ports, oversubscription and physical interfaces. After confirming the finding, a controlled remediation is to reserve supported spine and rack capacity for the forecast growth while tracking oversubscription targets.

Incorrect Answers

A:

The option “Compare the proposed topology with supported reference-design dimensions and template requirements” is useful in a different setting: An architect wants consistent rack scale-out using a reference design rather than independently inventing each fabric topology. The case being tested is: A planned Apstra fabric includes future rack growth but the initial design leaves no capacity for additional spine downlinks. Calculate required leaf uplinks and available spine ports for projected growth under the topology template. The most discriminating first check is “Calculate required leaf uplinks and available spine ports for projected growth under the topology template”.

B:

“Review intended external service connectivity and supported blueprint reference-design capabilities” is relevant to a different condition: A greenfield project needs to decide whether the fabric template supports intended border connectivity and routing roles. The stated question instead concerns: A planned Apstra fabric includes future rack growth but the initial design leaves no capacity for additional spine downlinks. Calculate required leaf uplinks and available spine ports for projected growth under the topology template. The most discriminating first check is “Calculate required leaf uplinks and available spine ports for projected growth under the topology template”.

D:

“Compare required external routing connections with the template topology and leaf roles” is associated with a distinct issue: A proposed rack blueprint includes all needed devices but its graph does not represent an external border connection required by applications. By contrast, the actual problem is: A planned Apstra fabric includes future rack growth but the initial design leaves no capacity for additional spine downlinks. Calculate required leaf uplinks and available spine ports for projected growth under the topology template. The most discriminating first check is “Calculate required leaf uplinks and available spine ports for projected growth under the topology template”.

Question 85

An engineer brings up BGP peers to the spines but omits export of the overlay endpoint loopbacks. Which design or operational principle best explains this behavior?

  1. An IP fabric requires valid routed underlay adjacency and reachability before an EVPN-VXLAN overlay can operate correctly.
  2. Path redundancy only improves availability when failed underlay next hops are withdrawn or detected promptly.
  3. Overlay tunnel endpoint reachability depends on the underlay carrying the VTEP loopback routes.
  4. Equal-cost multipath commonly hashes individual flows to a path while distributing many flows across available next hops.

Explanation

Correct Answer

C:

overlay tunnel endpoint reachability depends on the underlay carrying the VTEP loopback routes. Here, an engineer brings up BGP peers to the spines but omits export of the overlay endpoint loopbacks. A useful discriminating check is to inspect routing tables and underlay advertisements for each intended VTEP address.

Incorrect Answers

A:

“An IP fabric requires valid routed underlay adjacency and reachability before an EVPN-VXLAN overlay can operate correctly” is associated with a distinct issue: A data center team adds a leaf switch but the new node cannot reach any spine loopback addresses although local links are up. By contrast, the actual problem is: An engineer brings up BGP peers to the spines but omits export of the overlay endpoint loopbacks. Overlay tunnel endpoint reachability depends on the underlay carrying the VTEP loopback routes. The controlling principle is “Overlay tunnel endpoint reachability depends on the underlay carrying the VTEP loopback routes”.

B:

The option “Path redundancy only improves availability when failed underlay next hops are withdrawn or detected promptly” is useful in a different setting: A fabric uses two equal-cost underlay next hops yet packets continue toward a failed path following a port outage. The case being tested is: An engineer brings up BGP peers to the spines but omits export of the overlay endpoint loopbacks. Overlay tunnel endpoint reachability depends on the underlay carrying the VTEP loopback routes. The controlling principle is “Overlay tunnel endpoint reachability depends on the underlay carrying the VTEP loopback routes”.

D:

That choice—“Equal-cost multipath commonly hashes individual flows to a path while distributing many flows across available next hops”—addresses this other problem: An operator finds two equal-cost fabric paths but a single large traffic flow consistently traverses only one link. Here the scenario is: An engineer brings up BGP peers to the spines but omits export of the overlay endpoint loopbacks. Overlay tunnel endpoint reachability depends on the underlay carrying the VTEP loopback routes. The controlling principle is “Overlay tunnel endpoint reachability depends on the underlay carrying the VTEP loopback routes”.

Question 86

A new operations account can open the Apstra UI yet receives authorization errors when trying to manage device blueprints. Which initial check would most directly distinguish the likely cause?

  1. Inspect the user's role assignments and denied operation in the Apstra access and audit records.
  2. Inspect device-agent health, controller connectivity, authentication and management-path reachability.
  3. Review pending changes, user audit trail and the blueprint's staged or uncommitted state before new edits.
  4. Compare the restored controller state against live device configuration and the latest known approved revision.

Explanation

Correct Answer

A:

This checks the relevant evidence first: inspect the user's role assignments and denied operation in the Apstra access and audit records. The underlying concept is that Apstra role-based access control separates read visibility from permissions to change managed fabric objects. After confirming the finding, a controlled remediation is to grant the minimum documented blueprint role permissions through the approved access-review process.

Incorrect Answers

B:

“Inspect device-agent health, controller connectivity, authentication and management-path reachability” is associated with a distinct issue: A control-plane service is healthy yet one switch disappears from the Apstra device inventory after a management-network change. By contrast, the actual problem is: A new operations account can open the Apstra UI yet receives authorization errors when trying to manage device blueprints. The relevant inspection is: Inspect the user's role assignments and denied operation in the Apstra access and audit records. The most discriminating first check is “Inspect the user's role assignments and denied operation in the Apstra access and audit records”.

C:

The option “Review pending changes, user audit trail and the blueprint's staged or uncommitted state before new edits” is useful in a different setting: Two on-call staff attempt to stage modifications for the same fabric without a documented approval process. The case being tested is: A new operations account can open the Apstra UI yet receives authorization errors when trying to manage device blueprints. The relevant inspection is: Inspect the user's role assignments and denied operation in the Apstra access and audit records. The most discriminating first check is “Inspect the user's role assignments and denied operation in the Apstra access and audit records”.

D:

“Compare the restored controller state against live device configuration and the latest known approved revision” is relevant to a different condition: An operations team recovers a backup of the controller taken before the most recent fabric changes. The stated question instead concerns: A new operations account can open the Apstra UI yet receives authorization errors when trying to manage device blueprints. The relevant inspection is: Inspect the user's role assignments and denied operation in the Apstra access and audit records. The most discriminating first check is “Inspect the user's role assignments and denied operation in the Apstra access and audit records”.

Question 87

A new pod requires a repeatable three-stage Clos layout but its design draft mixes unsupported spine counts and random cabling. Which controlled change best addresses the described requirement?

  1. Reserve supported spine and rack capacity for the forecast growth while tracking oversubscription targets.
  2. Select a compatible reference design and align planned spine, leaf and rack relationships before deployment.
  3. Choose the reference design and blueprint template that satisfy gateway connectivity and scaling constraints.
  4. Expand spine capacity or rescope rack additions under a supported topology design.

Explanation

Correct Answer

B:

This action addresses the stated defect: select a compatible reference design and align planned spine, leaf and rack relationships before deployment. The underlying constraint is that Apstra reference designs provide supported fabric topology constraints that guide reproducible rack and spine planning. Verify rather than assume success: confirm topology validation succeeds and the planned rack connections fit the chosen design.

Incorrect Answers

A:

“Reserve supported spine and rack capacity for the forecast growth while tracking oversubscription targets” is relevant to a different condition: A planned Apstra fabric includes future rack growth but the initial design leaves no capacity for additional spine downlinks. The stated question instead concerns: A new pod requires a repeatable three-stage Clos layout but its design draft mixes unsupported spine counts and random cabling. The governing requirement is to Select a compatible reference design and align planned spine, leaf and rack relationships before deployment. The most relevant correction is “Select a compatible reference design and align planned spine, leaf and rack relationships before deployment”.

C:

“Choose the reference design and blueprint template that satisfy gateway connectivity and scaling constraints” is associated with a distinct issue: A data center operator wants to model redundant external gateways before ordering physical rack and fabric equipment. By contrast, the actual problem is: A new pod requires a repeatable three-stage Clos layout but its design draft mixes unsupported spine counts and random cabling. The governing requirement is to Select a compatible reference design and align planned spine, leaf and rack relationships before deployment. The most relevant correction is “Select a compatible reference design and align planned spine, leaf and rack relationships before deployment”.

D:

The option “Expand spine capacity or rescope rack additions under a supported topology design” is useful in a different setting: A planned rack addition fails because the spine layer has no compatible free ports at the required link speed. The case being tested is: A new pod requires a repeatable three-stage Clos layout but its design draft mixes unsupported spine counts and random cabling. The governing requirement is to Select a compatible reference design and align planned spine, leaf and rack relationships before deployment. The most relevant correction is “Select a compatible reference design and align planned spine, leaf and rack relationships before deployment”.

Question 88

A blueprint raises a service anomaly for a virtual network even though all interfaces in its rack are administratively up. Which controlled change best addresses the described requirement?

  1. Route the issue to the correct service, telemetry or device workflow based on the observed anomaly evidence.
  2. Correct the mismatched service intent or deployed configuration while preserving authorized tenant isolation.
  3. Investigate the measured condition and adjust the approved monitored system or justified probe threshold.
  4. Use each blueprint tab for its intended lifecycle step and deploy changes only after authorized review.

Explanation

Correct Answer

B:

This action addresses the stated defect: correct the mismatched service intent or deployed configuration while preserving authorized tenant isolation. The underlying constraint is that an Apstra service anomaly indicates observed service state deviates from modeled intent and need not indicate a physical interface failure. Verify rather than assume success: confirm the service anomaly clears and the affected workload network passes functional tests.

Incorrect Answers

A:

The option “Route the issue to the correct service, telemetry or device workflow based on the observed anomaly evidence” is useful in a different setting: A support engineer assumes every anomaly is a device-down alarm even when the affected rule is a tenant connectivity expectation. The case being tested is: A blueprint raises a service anomaly for a virtual network even though all interfaces in its rack are administratively up. Correct the mismatched service intent or deployed configuration while preserving authorized tenant isolation. The most relevant correction is “Correct the mismatched service intent or deployed configuration while preserving authorized tenant isolation”.

C:

That choice—“Investigate the measured condition and adjust the approved monitored system or justified probe threshold”—addresses this other problem: A custom telemetry probe flags a latency anomaly but the blueprint shows no service configuration errors. Here the scenario is: A blueprint raises a service anomaly for a virtual network even though all interfaces in its rack are administratively up. Correct the mismatched service intent or deployed configuration while preserving authorized tenant isolation. The most relevant correction is “Correct the mismatched service intent or deployed configuration while preserving authorized tenant isolation”.

D:

“Use each blueprint tab for its intended lifecycle step and deploy changes only after authorized review” is associated with a distinct issue: A network team needs to distinguish observed operational health from whether the desired blueprint configuration is active. By contrast, the actual problem is: A blueprint raises a service anomaly for a virtual network even though all interfaces in its rack are administratively up. Correct the mismatched service intent or deployed configuration while preserving authorized tenant isolation. The most relevant correction is “Correct the mismatched service intent or deployed configuration while preserving authorized tenant isolation”.

Question 89

A new QFX leaf responds to management pings while the Apstra device manager reports no valid agent identity. Which design or operational principle best explains this behavior?

  1. Device replacement requires reconciling the blueprint's intended logical device with the actual managed system identity.
  2. Apstra fabric onboarding needs a compatible managed agent and correctly established system identity, not only IP connectivity.
  3. Unique accurate managed device identities are required for safe inventory and blueprint allocation.
  4. Cabling validation compares observed neighbor links against intended device/interface relationships.

Explanation

Correct Answer

B:

Apstra fabric onboarding needs a compatible managed agent and correctly established system identity, not only IP connectivity. Here, a new QFX leaf responds to management pings while the Apstra device manager reports no valid agent identity. A useful discriminating check is to inspect the device-agent state, management authentication and discovered system ID before allocation.

Incorrect Answers

A:

“Device replacement requires reconciling the blueprint's intended logical device with the actual managed system identity” is associated with a distinct issue: A failed managed switch is swapped physically yet Apstra refuses deployment to the replacement inventory device. By contrast, the actual problem is: A new QFX leaf responds to management pings while the Apstra device manager reports no valid agent identity. Apstra fabric onboarding needs a compatible managed agent and correctly established system identity, not only IP connectivity. The controlling principle is “Apstra fabric onboarding needs a compatible managed agent and correctly established system identity, not only IP connectivity”.

C:

“Unique accurate managed device identities are required for safe inventory and blueprint allocation” is relevant to a different condition: A deployment team duplicates a device-system ID when registering two new leaf switches. The stated question instead concerns: A new QFX leaf responds to management pings while the Apstra device manager reports no valid agent identity. Apstra fabric onboarding needs a compatible managed agent and correctly established system identity, not only IP connectivity. The controlling principle is “Apstra fabric onboarding needs a compatible managed agent and correctly established system identity, not only IP connectivity”.

D:

That choice—“Cabling validation compares observed neighbor links against intended device/interface relationships”—addresses this other problem: A newly staged fabric reports LLDP neighbor mismatches although physical links are up. Here the scenario is: A new QFX leaf responds to management pings while the Apstra device manager reports no valid agent identity. Apstra fabric onboarding needs a compatible managed agent and correctly established system identity, not only IP connectivity. The controlling principle is “Apstra fabric onboarding needs a compatible managed agent and correctly established system identity, not only IP connectivity”.

Question 90

An operations team recovers a backup of the controller taken before the most recent fabric changes. Which evidence most directly verifies the intended network outcome?

  1. Confirm the account performs only its assigned blueprint tasks and unauthorized functions remain denied.
  2. Confirm the server receives fresh device state and reconciles inventory and blueprint expectations.
  3. Prove the switch joins managed inventory and supports required rendered configuration under the selected blueprint.
  4. Confirm intended and running configurations are consistent and the fabric's critical paths remain operational.

Explanation

Correct Answer

D:

This directly tests the desired result: confirm intended and running configurations are consistent and the fabric's critical paths remain operational. The decisive investigation is to compare the restored controller state against live device configuration and the latest known approved revision. The governing principle is that the controller's intended blueprint state and deployed device configurations must be reconciled after an out-of-band restore.

Incorrect Answers

A:

That choice—“Confirm the account performs only its assigned blueprint tasks and unauthorized functions remain denied”—addresses this other problem: A new operations account can open the Apstra UI yet receives authorization errors when trying to manage device blueprints. Here the scenario is: An operations team recovers a backup of the controller taken before the most recent fabric changes. The controller's intended blueprint state and deployed device configurations must be reconciled after an out-of-band restore. The direct acceptance evidence is “Confirm intended and running configurations are consistent and the fabric's critical paths remain operational”.

B:

“Confirm the server receives fresh device state and reconciles inventory and blueprint expectations” is associated with a distinct issue: A managed leaf is physically reachable but its Apstra device agent no longer reports state to the controller. By contrast, the actual problem is: An operations team recovers a backup of the controller taken before the most recent fabric changes. The controller's intended blueprint state and deployed device configurations must be reconciled after an out-of-band restore. The direct acceptance evidence is “Confirm intended and running configurations are consistent and the fabric's critical paths remain operational”.

C:

The option “Prove the switch joins managed inventory and supports required rendered configuration under the selected blueprint” is useful in a different setting: A new leaf model arrives with an unsupported operating-system image while the Apstra server still shows available inventory capacity. The case being tested is: An operations team recovers a backup of the controller taken before the most recent fabric changes. The controller's intended blueprint state and deployed device configurations must be reconciled after an out-of-band restore. The direct acceptance evidence is “Confirm intended and running configurations are consistent and the fabric's critical paths remain operational”.

Data Center, Specialist (JNCIS-DC) (JN0-481) Practice Tests